iG5A, product manual - H2flow

• Navigating codes in a groupWhen moving from F 1 to F 15 in Function group 11-. In F 1, continue pressing the Up ()key until F15 is displayed.2 -. Moving to F15 has been complete.♣ The same applies to Function group 2 and I/O group.♣Note: Some codes will be skipped in the middle of increment ()/decrement () for codechange. That is because it is programmed that some codes are intentionally left blank forfuture use or the codes user does not use are invisible.Refer to the Ch.5 for more specific contentsFor example, when F24 [High/low frequency limit select] is set to “O (No) ”, F25 [Highfrequency limit] and F26 [Low frequency limit] are not displayed during code change. ButWhen F24 is set to “1(Yes)”, F25 and F26 will appear on the display.4-9