iG5A, product manual - H2flow

4.4 How to change the codes in a group• Code change in Drive group1234-. In the 1 st code in Drive group “0.00”,press the Up () key once.-. The 2 nd code in Drive group “ACC” isdisplayed.-. Press the Up () key once.-. The 3 rd code “dEC” in Drive group isdisplayed.-. Keep pressing the Up () key until thelast code appears.-. The last code in Drive group “drC” isdisplayed.-. Press the Up () key again.Drive group5 -. Return to the first code of Drive group.♣ Use Down () key for the opposite order.• Code jumpWhen moving from the “F 0” to the “F 15” directly1 -. Press the Ent (•) key in “F 0”.FU group 1234-. 1 (the code number of F1) is displayed.Use the Up () key to set to 5.-. “05” is displayed by pressing the Left() key once to move the cursor to theleft. The numeral having a cursor isdisplayed brighter. In this case, 0 is active.-. Use the Up () key to set to 1.-. 15 is set.-. Press the Ent (•) key once.5 -. Moving to F 15 has been complete.♣ Function group 2 and I/O group are settable with the same setting.4-8