iG5A, product manual - H2flow

CHAPTER 13 -SPECIFICATIONS13.1 Technical data• Input & output ratings: Single Phase 200V ClassSV ■■■iG5A –1 ■■ 004 008 015[HP] 0.5 1 2Max capacity 1 [kW] 0.4 0.75 1.5OutputratingsCapacity [kVA] 2 0.95 1.9 3.0FLA [A] 3 2.5 5 8Max Frequency 400 [Hz] 4Max Voltage 3Φ 200 ~ 230V 5Rated Voltage 1Φ 200 ~ 230 VAC (+10%, -15%)Inputratings Rated Frequency 50 ~ 60 [Hz] (±5%)Cooling methodForced coolingWeight [kg] 0.77 1.12 1.84• Input & output ratings: Three Phase 200V ClassSV ■■■iG5A –2 ■■ 004 008 015 022 037 040 055 075 110 150 185 220[HP] 0.5 1 2 3 5 5.4 7.5 10 15 20 25 30Max capacity 1 [kW] 0.4 0.75 1.5 2.2 3.7 4.0 5.5 7.5 11 15 18.5 22OutputratingsInputratingsCapacity [kVA] 2 0.95 1.9 3.0 4.5 6.1 6.5 9.1 12.2 17.5 22.9 28.2 33.5FLA [A] 3 2.5 5 8 12 16 17 24 32 46 60 74 88MaxFrequency400 [Hz] 4Max Voltage 3Φ 200 ~ 230V 5Rated Voltage 3Φ 200 ~ 230 VAC (+10%, -15%)RatedFrequency50 ~ 60 [Hz] (±5%)Cooling method N/C 6 Forced coolingWeight [kg] 0.76 0.77 1.12 1.84 1.89 1.89 3.66 3.66 9.0 9.0 13.3 13.31) Indicates the maximum applicable motor capacity when using a 4-pole standard motor.2) Rated capacity is based on 220V for 200V class and 440V for 400V class.3) Refer to 13-4 when Carrier frequency setting (H39) is above 3kHz.4) Max frequency setting range is extended to 300Hz when H40 (Control mode select) is set to 3(Sensorless vector control).5) Maximum output voltage cannot be higher than the input voltage. It can be programmable belowinput voltage.6) N/C: Natural Convention13-1