iG5A, product manual - H2flow

9.3 Monitoring fault condition• Monitoring current fault statusGroup Display Parameter Name Setting Range Default UnitDrive group nOn [Current Fault Display] -• Fault occurred during operation is displayed in nOn.• Up to 3 kinds of faults can be monitored. This parameter gives information on fault types and the operating status at the time of the fault.Refer to Page 4-11 or 9-5 for keypad setting.Fault FrequencytypesCurrentAccel/DecelInformationFault during AccelFault during DecelFault during constant run Refer to Page 12-1 on fault types.• Fault History MonitoringGroup Display Parameter Name Setting Range Default UnitFunctiongroup 2H 1 [Fault history 1] -~ ~H 5 [Fault history 5]H 6 [Reset fault history] - 0 ~ 1 0• H 1 ~ H 5: Up to 5 faults information is stored.• H 6: Previous fault information stored in the code H1 thru H5 is all cleared. When a fault occurs during operation, it can be monitored in the nOn.9-4