iG5A, product manual - H2flow

• User display selectGroup Display Parameter Name Setting Range Default UnitDrive group vOL [User display select] -Functiongroup 2H73 [Monitoring item select] - 0 ~ 2 0• The selected item in H73- [Monitoring item select] can be monitored in vOL- [User displayselect.• If output power or torque is selected, Por or tOr will be displayed. H73: Select one of the desired item numbers.H73 [Monitoring itemselect]0 Output voltage [V]1Output power[kW]2 Torque [kgf ⋅ m] Enter motor efficiency indicated on motor nameplate to H36 to display correct torque.• Power on displayGroup Code Parameter Setting range InitialFunction H72 [Power on display] 0 Frequency command (0.00) 0group 21 Accel time (ACC)2 Decel time (DEC)3 Drive mode (drv)4 Frequency mode (Frq)5 Multi-step frequency 1(St1)6 Multi-step frequency 2(St2)7 Multi-step frequency 3(St3)8 Output current (CUr)`9 Motor rpm (rPM)10 Inverter DC link voltage (dCL)11 User display select (vOL)12 Fault display 1(nOn)13 Operating direction select (drC)14 Output current 215 Motor rpm 216 Inverter DC link voltage 217 User display select 2• Select the parameter to be displayed on the keypad when Power ON.• The output current, motor rpm, DC link voltage and User display select are displayeddirectly when 14~17 are set.9-2