iG5A, product manual - H2flow

8.25 Parameter Initialize / Lock• Parameter initializeGroup Display Parameter Name Range DefaultFunctiongroup 2H93 [Parameter initialize] 0 - 01 4 groups initialize2 Drive group initialize3 F 1 group initialize4 F 2 group initialize5 I/O group initialize• Select the group to be initialized and perform it in H93 code. Press Enter (•) key after setting in H93. H93 will be displayed again after initialization iscomplete.• Password registerGroup Display Parameter Name Setting Range Default UnitFunctiongroup 2H94 [Password register] - 0 ~ FFFF 0H95 [Parameter lock] - 0 ~ FFFF 0• Register password for Parameter lock (H95).• Password should be Hex decimal. (0 ~ 9, A, B, C, D, E, F)CAUTIONAfter setting modification lock function of H95, Do not forget the registeredpassword. if you try to release lock, you need the registered password. Factory default password is 0. Enter the new password except 0. Follow the steps below when you register the password for the first time.Step Note Keypad display1 Move to H94 code. H942 Press Enter (•) key twice. 03 Register password. (Ex: 123) 1234 123 will blink when Enter (•) key is pressed. 1235 Press Enter (•) key. H948-31