iG5A, product manual - H2flow

P1P7FX : I 17 = 0JOG : I23=26CM8.3 UP-DOWN Drive• Up-down storage functionGroup Display Parameter Name Setting Range Default UnitDrivegroupFrq [Frequency setting method] 8 0~8 0I17[Multi-function inputterminal P1 define]0 0I/OgroupFunctiongroup 1I22I23I24F63F64[Multi-function inputterminal P6 define][Multi-function inputterminal P7define][Multi-function inputterminal P8define][Up-down frequency Saveselect][Up-down frequencystorage]25 50 ~ 2715 616- 0~1 0- 0.007• Select 8 in Frq code of drive group• Select the terminal which uses as a up-down drive among multi-function input (P1~P8)• If you select P7 and P8 as an up-down drive terminal, select each 15 (frequency increasecommand) and 16 (frequency decrease command) in the I23 and I24 of I/O group.• If you select P6 terminal as an up-own save initial terminal, select 25 (up-down saveinitialization) as above.• Up/down Save function: If F63, ‘Save up/down frequency’, is set to 1, the frequency beforethe inverter was stopped or decelerated is saved in F64. While up-down save operates, the user can initialize the saved up-down frequency by settingmulti-function input terminal as a up-down frequency save initialization.F63 Save up/down frequency select 0 Remove ‘save up/down frequency’1 Set ‘save up/down frequency’F64 Save up/down frequency Up/down frequency saved If ‘Up/Down Save Frequency Initialization’ signal is input while the multi-function input ‘Up’ or‘Down’ function is applied, this signal is ignored.8-4