Eagle - Premier RC

Kite Assembly Instructions12Inner Leading Edge StrutOuter LeadingEdge ConnectorStart of SleeveStraighten the beak after unpackingInsert Inner Leading Edge Strut into the sleeve inside the zippered body.Leading Edge Strut should extend all the way into the Outer Leading EdgeConnector. Repeat with second Inner Leading Edge Strut on other side.Motor Mount Frame3Connect InnerLeading EdgeStruts to DihedralCorrect Dihedral PositionIncorrect Dihedral PositionSide Motor Mount Frame ExtensionsRear Motor Mount Frame ExtensionTail SpreaderInner Leading Edge StrutsUnderwing SpreadersUnroll the kite.Lay the kite out on a flat surface with the zippered pocket facing up.Straighten the Eagle's beak. Set aside and identify the struts.Insert remaining ends of both Inner Leading Edge Struts into the UpperDihedral. Make sure the tip of the Dihedral is pointed towards the zipper,not towards the back of the Eagle.4 5