Cisco WAP200 Wireless-G Access Point with PoE and ...
Cisco WAP200 Wireless-G Access Point with PoE and ...
Cisco WAP200 Wireless-G Access Point with PoE and ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Wireless</strong>-G <strong>Access</strong> <strong>Point</strong> <strong>with</strong> Power Over Ethernet <strong>and</strong> RangeboosterRADIUSThis security mode is also known as Dynamic WEP <strong>with</strong> IEEE 802.1X. A RADIUS server is used for clientauthentication <strong>and</strong> WEP is used for data encryption. The WEP key is automatically generated by the RADIUSserver. Manual WEP key is no longer supported to ensure compatibility <strong>with</strong> Microsoft’s Windowsimplementation.RADIUS Server IP Address. Enter the RADIUS server’s IP address.RADIUS Server Port. Enter the port number used by the RADIUS server. The default is 1812.Shared Secret. Enter the Shared Secret key used by the <strong>Access</strong> <strong>Point</strong> <strong>and</strong> RADIUS server.DisableThere is no option to be configured for this mode.When you have finished making changes to the screen, click the Save Settings button to save the changes, orclick the Cancel Changes button to undo your changes. Help information is available on the right side of thescreen.Figure 6-12: <strong>Wireless</strong> - <strong>Wireless</strong> Security (RADIUS)Chapter 6: Configuring the <strong>Wireless</strong>-G <strong>Access</strong> <strong>Point</strong>The <strong>Wireless</strong> - <strong>Wireless</strong> Security Tab23
Change language