Romeo Attaché Romeo Attaché Pro Romeo 25 & Romeo Pro 50

SETTING UP YOUR EMBOSSERUnpackingFirst, check the embosser and accessories carefully for damage. If anydamage is apparent, notify the shipper immediately. Also, check thecontents against the packing list and if you find a discrepancy, let us know assoon as possible.IMPORTANT! Remove any shipping locks that may be in place and savethem, along with the carton and other packing material. Youwill need them should you ever have to return the embosserfor service. Although the embosser is in a very sturdy,shock-resistant case, shipping any electronic equipmentwithout proper packing is not a good idea!Romeo Attaché and Romeo Attaché ProPlace the embosser on a sturdy desk or table with the handle facing you.Plug the power cord first into the embosser’s power interlock located on theright side panel, and then into a grounded outlet. (The embosser's powerrequirements are listed under "Electrical" in the "Technical Specifications"section later in this manual.)Romeo 25 and Romeo Pro 50Place the embosser on a sturdy desk or table with the handle of theembosser facing you and remove the lid. Remove the shipping lock accordingto the directions found in the box. Plug the power cord first into theembosser's power interlock, and then into a grounded outlet. (Theembosser's power requirements are listed under "Electrical" in the "TechnicalSpecifications" section later in this manual.)Installing PaperYour embosser will produce good quality Braille on paper weights fromstandard 20-pound computer paper (suitable for rough drafts) to 100-poundtraditional Braille paper (recommended for more permanent documents).Remove the paper from the box by turning the box upside down and stackthe paper neatly on the floor in front of the table.Romeo Attaché, Romeo Attaché Pro, Romeo 25 & Romeo Pro 50 7