continued

HEAVY DUTYSTAINLESSSTEELGRAB BARSGRABBARSADA COMPLIANTBARRIER FREESPECIFICATIONS♦ TUBING IS FABRICATED FROM 18 GAUGE (.049”), TYPE 304 STAINLESS STEEL.♦ EXPOSED SURFACES POLISHED TO A NO. 4 SATIN FINISH.♦ CONCEALED FLANGES ARE 11 GAUGE (1/8”), TYPE 304 STAINLESSSTEEL, 3” IN DIAMETER. 22 GAUGE (1/32”), TYPE 304 STAINLESS STEELSNAP FLANGE COVER PLATE ESCUTCHEON.♦ MOUNTING PLATES AND CENTER POSTS ARE HELIARC WELDED TO TUBING.♦ TUBING IS FABRICATED OF 18 GAUGE (.050), TYPE 304 STAINLESS STEEL.♦ EXPOSED SURFACES POLISHED TO A NO. 4 SATIN FINISH.CONCEALEDGRAB BARS♦ EXPOSED FLANGES ARE 11 GAUGE (1/8”), TYPE 304 STAINLESS STEEL,3” IN DIAMETER WITH 3 MOUNTING HOLES.♦ FLANGES AND CENTER POSTS ARE HELIARC WELDED TO TUBING.♦ ALL BARS ARE FURNISHED WITH 1-1/2” CLEARANCE UNLESS OTHERWISESPECIFIED.♦ CLEARANCE IS THE DISTANCE BETWEEN THE FINISHED WALL SURFACE ANDTHE INNER EDGE OF THE TUBING. THE STANDARD CLEARANCE FURNISHED IS1-1/2” (AS SHOWN). OTHER CLEARANCES ARE AVAILABLE UPON REQUEST.♦ CUSTOM MADE GRAB BARS ARE AVAILABLE UPON REQUEST.♦ MEETS ADA REQUIREMENTS.EXPOSEDGRAB BARSTAYMOR GRAB BARSWHEN PROPERLY INSTALLED, EXCEED HUD, HEW, FHA, VAAND OTHER FEDERAL, STATE AND LOCAL CODES.TAYMOR INDUSTRIES INC. ♦ APRIL 2012GRAB BARS - PAGE 1® REGISTERED TRADEMARK OF TAYMOR INDUSTRIES LTD.