continued

BUILDER SERIES LOCKSETSGENERAL INFORMATIONHANDINGFor Right or Left hand doors, except Huron leversets which need TO be specified R or LAT the end of the pART number.INSTALLATIONEasy assembly with full instructions for new installations (Replaces most other brandsFOR retrofit doors).All locks can be ordered with UL 30 minute rated latches AT the time of order only.TECHNICAL & DOOR PREPARATIONDOOR THICKNESSfITS doors 1-3/8” thick (35 mm) TO 1-3/4” (45 mm) thick.ADJUSTABLE LATCH (AVAILABLE IN SPRING LATCH, DEADLOCKING LATCH AND DEADBOLT LATCH)2-3/8” (60 mm) & 2-3/4” (70 mm) ADJUSTAble backset.BORE DIAMETERSlOCksets or deadbolts 2-1/8” (54 mm), latch 1” (25 mm).BUILDERSSERIESLOCKSETADJUSTABLE DEADLOCKING LATCHStandard with entry locks.EXTERIOR KNOBS & ROSESOne piece seamless knob / reinforced rose with steel rose lining.LOCK CONSTRUCTIONAll solid steel interior mechanical.INSIDE LOCKINGbUTTON.STRIKE PLATE1/4” Corner radius supplied standard.Deadbolts include 1-3/4” x 2-1/4” radius corner standard.SCREWSCombination wood / metal screws.KEYING INFORMATIONKEYWAYKwikset keywAY standard.CYLINDERFive pin cylinder, zinc plug, rekeyable.KEYSTwo keys per entry lock, deadbolt, handlesets.KEY BLANKEZ Set – Kwikset compATIble.* DRIVE-IN ADJUSTABLE LATCHES AVAILABLE UPON REQUEST.(2-3/8” AND 2-3/4” ADJUSTABLE SPRING LATCH, DEADLOCKING LATCH AND DEABOLT LATCH)TAYMOR INDUSTRIES INC. ♦ JUNE 2012RESIDENTIAL LOCKSETS - PAGE 1® REGISTERED TRADEMARK OF TAYMOR INDUSTRIES LTD.