Tractions - Sapaco 2000
Tractions - Sapaco 2000
Tractions - Sapaco 2000
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Eurotrak - Electronic Traction UnitMade in Italyoperation modeStaticIn static mode the unit exerts a steady force, equal to the set value,throughout the treatment.11Increment(Phase 3)Traction(Phase 1)Decrement(Fase 4)Pause (Phase 2)DynamicIn dynamic mode there are four phases as shown in the diagrambelow while the table gives the parameters for each phase.Phase 1:tractionPhase 2:pausePhase 3:incrementPhase 4:decrement• Traction time;• Traction force• Pause time;• Recovery: percentage of the traction force one wants to be maintained during the pause time• Increment speed: force increment speed, in kg/s, to change from the selected pause value (recovery) to the selected traction value• Decrement speed: force decrement speed, in kg/s, to change from the selected traction value to the selected pause value (recovery)PeriodThe set Delta and Period values are valid for all the phasesfor which the intermittent operation is enabled.DeltaDynamic intermittentIn dynamic mode, you can set the parameters related to the intermittentoperation in the screen that appears when pressing the NEXT key.You can enable or disable the intermittent operating mode for each phase(the reference phases are those described in the previous paragraph).An instance of the intermittent operation is described in the followingdiagram, with reference to the traction phase.TECHNICAL SPECIFICATIONSPre-set treatments 10Storable treatments:50 (three-step sequence)Operation modeStatic, Dynamic, Intermittent dynamicTreatment time0 – 60 minutesEmergency stop buttonYesEnd-of-treatment alert toneYesCervical tractionMax 20 kgLumbar tractionMax 90 kgPower supply230 +/- 10% - 50/60 HzFuses2 x T 0,5 AInput power80 VA93/42/EEC ClassII BDimensions38 x 34 x 15 h cmWeight15 kg281