HMT Gauge Pole Float and Sleeve
HMT Gauge Pole Float and Sleeve
HMT Gauge Pole Float and Sleeve
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Gauge</strong> <strong>Pole</strong> <strong>Float</strong> <strong>and</strong> <strong>Sleeve</strong>Various regulatory agencies are requiringthat slotted gauge/guide poles be equippedwith an emissions control system. The <strong>HMT</strong><strong>Gauge</strong> <strong>Pole</strong> <strong>Float</strong> <strong>and</strong> <strong>Sleeve</strong> has beendesigned to significantly reduce hydrocarbonemissions from slotted gauge/guide poleslocated on either external or internalfloating roof storage tanks.The <strong>HMT</strong> <strong>Gauge</strong> <strong>Pole</strong> <strong>Float</strong> <strong>and</strong> <strong>Sleeve</strong>features a “low-profile,” stainless steel sleevecontaining a 25-mil PetroflexTM PTFE(Teflon®) liner <strong>and</strong> pole wiper. This linerprovides excellent chemical <strong>and</strong> abrasionresistance <strong>and</strong> effectively closes the slots inthe gauge pole. The sleeve is equipped witha stainless steel slide plate containing a10-mil reinforced Teflon gasket.The sleeve completely seals off all the slotsof the gauge pole within the gauge well,eliminating vapor emissions through thegauge pipe.The stainless steel float contains a 10-milTeflon wiper <strong>and</strong> is designed to operate inspecific gravities ranging from 0.60 to 1.00.It effectively “plugs” the gauge pole,preventing vapors from escaping tothe atmosphere.Both the float <strong>and</strong> sleeve are designed to beinstalled with the storage tank remaining inservice. Additionally, the <strong>HMT</strong> <strong>Gauge</strong> <strong>Pole</strong><strong>Float</strong> Basin should be considered as part ofthis complete installation for additionalemission control.This new emission control system is anotherexample product of <strong>HMT</strong>’s“InnovativeSolutions” philosophy <strong>and</strong> commitment toproviding quality products to the petroleumindustry.Contact your local <strong>HMT</strong> Representative todiscuss the full suite of products <strong>and</strong>services that will satisfy all your AST needs.
The <strong>Gauge</strong> <strong>Pole</strong> <strong>Float</strong> <strong>and</strong> <strong>Sleeve</strong>Advanced Design FeaturesInclude:• Resistant to all stored products—stainless steel construction <strong>and</strong>components.• PTFE (Teflon®) liners <strong>and</strong> wipermaterials compatible with all storedproducts, abrasion resistant.• Low profile—<strong>Sleeve</strong> length sized tofit type of well <strong>and</strong> floating roof (18”to 36” in overall lengths, overalllength of float is 18”.• Designed for a long service life.• Constructed with lightweightstainless steel.• Maintenance free.• Easily installed without removing thetank from service.<strong>HMT</strong> Inc.23832 Tomball ParkwayTomball, Texas 77375Ph: +1.281.681.7000Fax: +1.281.351.8589Locations worldwide to serviceall your AST needs.Visit us at www.hmttank.comPetroflex® is a registered trademark of Ansell Edmont.Teflon® is a registered trademark of DuPont or its affiliates.
Change language