UO_1 Cover Unbranded:1 Cover - canada 10/6/09 10:46 AM Page 2

US/1109

l l e c t i o n C O N T E N T SKits 8The easiest ways to create a perfect display 8-11Sign systems 12Wall mounted supports for signs & graphics 13-15Cable systems 161.5mm cable & supports 17-233mm cable & supports 24-25Installation accessories & tools 26Installation accessories for cables & rods 26Channel installation ideas 27Promotional materials and spares 28Rod systems 293mm rod system & supports 30-326mm rod system & supports 33-3610mm rod system & supports 37-39Graphic displays 40Acrylic pockets & poster holders 41-42Hook-on accessories 43Leaflet dispensers 44Acrylic accessories 45Framed posters and ‘A’ boards 46Banner & hanging rails 47Product displays 48Shelving 49Acrylic display cubes 50Lighting 51How to choose your lighting 52Cantilevered lights 53-54Straight lights 55Wirelights 56Hightrack kits 57Highlight 58Lighting accessories 59Freestanding displays 60Freestyle - single units 61Flexiframe - multiple units & frame accessories 62Info-post 63Light boxes 64Cold cathode and curved light boxes 65XtraLite 66Support material 67Component measurements 673

create the perfect display forWall mounted...Signage suspended from the ceiling...Floor-to-ceiling creativity...Versatile cable and rod systems that allowyou to create exactly the display you want.4

you...Freestanding displaysAdd low voltage lighting5

Add flexibility to your displays6

Incredibly slim, bright light boxes create maximum impact...Ultra-bright, slimlight boxes can besuspended or wallmounted...used on their ownor combined withother displays...7

KitsPoster holders4 easy steps to create your perfect display:1. Decide if you want your display fitted ceiling to floor, wall mounted or freestanding.2. Decide if you want to display posters, leaflets, shelving or a combination.3. Select size of display4. Increase the impact of your display - add lighting. See page 51 for lighting available.Ceiling to floor kits- using 1.5mm cable- display posters in a range of sizesWall mounted kits- using 1.5mm cable- display posters in a range of sizesHook on kits- using 1.5mm floor toceiling cable- to display letter sizemedia- acrylic pockets hookonto rods supported onfloor/ceiling cablesK2228LKW2436LExamples:KH2/3LTRK21620LK3LTRKW3DBLLTRKW3LTRLKW3LTRKW2228K3DBLLTRK3TRPLTRItem Pocket No. of Format:Code: Size PocketsK3LTRL 11x8.5 3 LandscapeK3LTR 8.5x11 3 PortraitK3DBLLTR 8.5x11 6 PortraitK3TRPLTR 8.5x11 9 PortraitK21620L 20x16 2 LandscapeK21620 16x20 2 PortraitK2228L 28x22 1 LandscapeK2228 22x28 1 PortraitK2436L 36x24 1 LandscapeK2436 24x36 1 Portrait8.5x11 = 216x279mm11x8.5 = 279x216mm16x20 = 406x508mm20x16 = 508x406mmconversion chart22x28 = 559x711mm28x22 = 711x559mm24x36 = 610x914mm36x24 = 914x610mmItem Pocket No. of Format:Code: Size PocketsKW3LTRL 11x8.5 3 LandscapeKW3LTR 8.5x11 3 PortraitKW3DBLLTR 8.5x11 6 PortraitKW3TPLLTR 8.5x11 9 PortraitKW21620L 20x16 2 LandscapeKW21620 16x20 2 PortraitKW2228L 28x22 1 LandscapeKW2228 22x28 1 PortraitKW2436L 36x24 1 LandscapeKW2436 24x36 1 PortraitKW3TRLLTRKH2/4LTRItem No. ofCode: PocketsKH2/4LTR 4KH2/6LTR 6KH2/8LTR 8KH2/2LTR8

Picturecode topapersizes:Portrait:24x36 22x28 16x20 8.5x11 1/3LTRLandscape:24x3620x1611x8.5Wall mounted kits Suction pad kits 3mm rod kits- acrylic pocket with wall mounts- a highly attractive way topresent graphics and posters- pockets supplied with satinchrome wall supports that holdthe pocket 1” (25mm) awayfrom the wall- a highly economical solution tocreate powerful window andinternal displays that are held inposition with suction pads.- No installation required - justassemble and fix to window.- select from letter size or 16x20pockets, portrait or landscape.- each kit is supplied with 2 rods,4 clear suction pads, acrylicpockets, supports and fullassembly instructions.- kits available with 1, 2, 3 or 4pockets- for displays that are suspendedfrom the top.- a floating option that allowsinformation to be changed easily- can be fitted to ceiling or wall- ideal for really awkwardwindows- supplied with 6’6¾” (2m) rodsPoster holders +leaflet dispensers- choose from floor to ceiling orwall mounted- 16x20 or 22x28 poster holder- kit comes with poster holder, 2 xletter leaflet dispensers, 4 x tri-foldletter (with16x20) or 5 x tri-foldletter (with 22x28) leafletdispensers.K2436-WMK2436L-WMUnique fittingallows the unit tobe pulled awayfrom the wall orwindow easily.K1620L-WMKSLTR-3The bottom ofthe 3mm rod issupplied with astylish blackPVC end cap.Item Code:Items:Floor to ceiling:KPHLD1620 1 EAP16x201 LDTR141 LD2LTRItemCode:Pocket Format:Size:KLTR-WM 8.5x11 PortraitKLTRL-WM 11x8.5 LandscapeK1620-WM 16x20 PortraitK1620L-WM 20x16 LandscapeK2228-WM 22x28 PortraitK2228L-WM 28x22 LandscapeK2436-WM 24x36 PortraitK2436L-WM 36x24 LandscapeItem Pocket No. of Format:Code: Size PocketsKSLTR-3 8.5x11 1 PortraitKSLTRL-3 11x8.5 1 LandscapeKS2LTR-3 8.5x11 2 PortraitKS2LTRL-3 11x8.5 2 LandscapeKS3LTR-3 8.5x11 3 PortraitKS3LTRL-3 11x8.5 3 LandscapeKS4LTR-3 8.5x11 4 PortraitKS4LTRL-3 11x8.5 4 LandscapeKS1620-3 16x20 1 PortraitKS1620L-3 20x16 1 LandscapeEasy accesspockets -change thedisplay withinseconds.Item Pocket No. of Format:Code: Size PocketsKR3LTR 8.5x11 3 PortraitKR4LTR 8.5x11 4 Portrait*see page 8 for metric conversionKPHLD22281 EAP22x281 LDTR151 LD2LTR2Wall mounted:KPHLD1620-WM 1 EAP16x201 LDTR141 LD2LTRKPHLD2228-WM 1 EAP22x281 LDTR151 LD2LTR29

KitsLeaflet dispensersFreestanding unitsCeiling to floor kitsWall mounted kits10mm rod kits- units consist of 10mm stainlesssteel rods which are screwed intoa steel base.- Panel clamps support acrylicpockets or leaflet dispensers- supplied flat packed for easyassembly- 6’6¾” (2000mm) or 59”(1500mm) highLarge freestanding kits- larger units with many displayoptions using poster holders,leaflet dispensers and flat orsloping shelves- 3 frame widths to choose from,all units 78” (1981mm) high, base13¼” (337mm) diameter- supplied flat pack with easy tofollow assembly instructions- quick fit cable supplied cut tolengthKD23 x double letterK2DW3 x double letterK1D3 x letterK1DW3 x letterK5D3 x quadruple trifoldK5DW3 x quadruple letterKF51P4 x A4PortraitItemCode:Size:K3D3 x half letterItem Pocket No. of Format:Code: Size PocketsK1D 8.5x11 3 PortraitK2D 8.5x11 3 x double PortraitletterK3D 8.25x5.5 3 x half PortraitletterK5D 3.5x8.5 4 x tri-fold PortraitK3DW3 x half letterItem Pocket No. of Format:Code: Size PocketsK1DW 8.5x11 3 PortraitK2DW 8.5x11 3 x double PortraitletterK3DW 4.2x5.5 3 x half PortraitletterK5DW 3.5x8.5 3 x tri-fold Portrait6’6¾” (2m) high poster units:K10-3PKT 3 x LTR pocketsK10-4PKT 4 x LTR pocketsK10-combo 1 x LTR pocket3 x LTR dispencer59” (1.5m) high poster units:K10-3PKT-1.5 3 x LTR pocketsK10-combo-1.5 1 x LTR pocket2 x LTR dispencer59” (1.5m) high literature dispenser units:K10-LTRS 3 x LTR dispense single sideK10-LTRD 3 x LTR dispense double sideItemSize:Code:36”(914mm) wide frame with poster holders:KFR-3678-6LTR 6 x 8.5x11 pocketsKFR-3678-6LTR-LINK 6 x 8.5x11 pocketsKFR-3678-8LTR 8 x 8.5x11 pocketsKFR-3678-8LTR-DBL 8 x 8.5x11 pocketsKFR-3678-21620 2 x 16x20 pocketsKFR-3678-31620 3 x 16x20 pocketsKFR-3678-12228 1 x 22x28 pocketKFR-3678-22228 2 x 22x28 pocketsKFR-3678-12436 1 x 24x36 pocket10*see page 8 for metric conversion

ShelvingCeiling to floor kitsWall mounted kitsHanging rails- ideal for suspending clothing andlarge banners- cables fit floor to ceiling- supplied with 1” (25mm) hangingrails, 36” (914)mm long, heightfully adjustable and 13’1” (4m)cablesKHR1Single hang railKB1KB2KHR2Double hang railKWGS1 Large*shown withoptionalheaderpocketsItem Size:Code:36” (914mm) wide frame with shelves:KF1 3 large flat shelves25 x 13” (635 x 330mm)KF2 letter size sloping shelves- 2 x 1/4” (6mm) tempered safetyglass shelves- supplied with 13’1” (4m) cableplus hardware- add extra shelf or poster holderKGS4 Large narrowKGS1 Large- 2 x 1/4” (6mm) tempered safetyglass shelves- supplied with 9’8” (3m) cableplus hardware- add extra shelf or poster holderKWGS3SmallKWGS2MediumKHRS1Hang rail plusglass shelf6’8” (1727mm) wide frame with shelves:KF3 6 large flat shelves25 x 13” (635 x 330mm)KGS3 SmallItem Size:Code:36” (914mm) wide frame with shelves AND poster:KF4 24 x 36” (610 x 914mm) poster holder2 large flat glass shelves25 x 13” (635 x 330mm)6’8” (1727mm) wide frame with shelves AND poster:KF5 Double width2 x 24”x36” (610x914mm) poster holderplus 4 large flat glass shelves25 x 13” (635 x 330mm)Item Size:Code:2 x 36” (914mm) wide, hinged frames withleaflet dispensers:Single sided:FF1SSDouble sided:FF1DSHeader16 x tri-fold pockets(30 tri-fold pockets)plus 2 x double letter(4 letter pockets)6 x tri-fold pockets(60 tri-fold pockets)plus 4 x double letter(8 letter pockets)22 x 28” header pocketsItem Shelf size: Cable centers:Code: w x d w x dLarge:KGS1 25x13” 25½x12”(635 x 330mm) (635 x 305mm)Extra additions:KAGS2536 Add on shelfKA2436 24x36 poster holderMedium:KGS2 23 x 13” 23½ x 12”(584 x 330mm) (597 x 305mm)Extra additions:KAGS2313 Add on shelfKA2228 22 x 28 poster holderSmall:KGS3 17 x 13” 17½ x 12”(432 x 330mm) (445 x 305mm)Extra additions:KAGS1713 Add on shelfKA1620 16 x 20 poster holderLarge Narrow:KGS4 25 x 7” 25½ x 5 7 ⁄8”(635 x 178mm) (645 x 150mm)Extra additions:KAGS257 Add on shelfKA2436 24 x 36”poster holderItem Shelf size: Cable centers:Code: w x d w x dLarge:KWGS1 25x13” 25½x11 13 ⁄16”(635 x 330mm) (635 x 300mm)Extra additions:KAGS2536 Add on shelfKA2436 24x36 poster holderMedium:KWGS2 23 x 13” 23½ x 11 13 ⁄16”(584 x 330mm) (597 x 300mm)Extra additions:KAGS2313 Add on shelfKA2228 22 x 28 poster holderSmall:KWGS3 17 x 13” 17½ x 11 13 ⁄16”(432 x 330mm) (445 x 300mm)Extra additions:KAGS1713 Add on shelfKA1620 16 x 20 poster holderLarge Narrow:KWGS4 25 x 7” 25½ x 5 7 ⁄8”(635 x 178mm) (645 x 150mm)Extra additions:KAGS257 Add on shelfKA2436 24 x 36”poster holderItem Code:No. of RailsKHR1 1KHR2 2KHR1KHRP1KHRP1Hang rail plusposter pocket1 rail + 1 glassshelf 36 x 12” (914 x 305mm)1 rail + 1 36” x 20” (914 x 508mm)poster pocket11

SignsystemsAll you need to createhigh impact signs• Wall mountedsupports• Suspended signs• Directional signs• Banner displays• Hook-onpresentations• Projecting signs• Acrylic panels andposter holders• Show off yoursigns with elegantillumination• Instant solutionsfor exhibitionsignage12

Wall-mounted sign supports• hold signs away from the wall • enhance appearance • easy to keep cleanSupports for panels/signs with holes½” (12mm) diameter supports*WM123/4” (20mm) lengthItem Code: Finish: Panel hole Panel Requiressize: thickness: screw size:WM12 Satin Chrome 3/8” (9mm) up to 1/2” (12mm) No. 65⁄8” (16mm) diameter supports*WM19 - Flush CapDesigned to be used with a screwto mount a panel flat on the wallWM19 Satin Chrome 1/4” (6mm) - No. 10WM059/16” (14mm) lengthWM05 Satin Chrome 1/4” (6mm) up to 1/4” (6mm) No. 10WM05-131” (25mm) lengthWM05-13 Satin Chrome 1/4” (6mm) up to 1/2” (13mm) No. 10WM05L-201½” (40mm) lengthWM05L-20 Satin Chrome 1/4” (6mm) up to 3/4” (20mm) No. 10WM181” (25mm) lengthSupplied with a 3/4” (19mm) capWM18 Satin Chrome 1/4” (6mm) up to 1/2” (13mm) No. 10WM081¼” (32mm) overall lengthRubber shaft for use with glass.Can hold 2 x 6mm thick panelsonly. Barrel is 14mm long.WM08 Satin Chrome 3/8” (9mm) 12mm No. 101” (25mm) diameter supports*WM151” (25mm) lengthItem Code: Finish: Panel hole Panel Requiressize: thickness: screw size:WM15 Satin Chrome 1/2” (12mm) 1/4”-3/4” (6-20mm) No. 10WM162” (50mm) lengthWM16 Satin Chrome 1/2” (12mm) 1/4”-3/4” (6-20mm) No. 10WM17 3” (75mm) lengthWM17 Satin Chrome 1/2” (12mm) 1/4”-3/4” (6-20mm) No. 10* Componentsshown actual sizeStandard finish satin chrome, all other finishes on requestFull dimensions - p68All components shown on this page are in Satin Chrome finish.Most components are also available in the following finishes:PolishedChrome:PolishedBrass:13

Wall-mounted supportsAccessories for panels/signs with holesSupport joiner/panel spacer- make a strong design statementwith one panel in front ofanother to create a double-depthsign- takes a panel up to 1/4” (6mm)thick- also use to join two supportstogether to acheive requiredlength- invisible when in useSupports for panels without holesItem Code:PC31Finish:BrassPC31Panel support- for signs, panels or acrylicpockets up to 1/4” (7mm) thick- locks to any angle- ideal to use with easy accesspockets (page 41)Item Code:WM09Finish:Satin ChromePlastic spacer- enables a sign, panel or acrylicpocket to be fitted without a hole.Designed for use with 5/8”(16mm) diameter fittings- available in sizes: 1/13” (2mm),1/9” (3mm), 3/16” (4.8mm), 1/4”(6mm), thick- saves time and money, as there isno need to drill panels- clean appearance as no visiblescrewItem Code:WMS-2WMS-3WMS-4.8WMS-6Size:2mm3mm4.8mm6mmWMSFour way spacer- allows multiple panels to bebutted closely together.- holds panel on corner- takes panels up to 1/4” (6mm)thickItem Code: Finish:WM20 Satin ChromeFor components tocreate stunningdirectory signs, pleasesee the cable and rodsections.14

Wall-mounted supportsClamps for signs/shelvesProject 19mm from wall- supports that can be usedvertically for signs or horizontallyto support shelves- available in 2 sizes to holdsigns/shelves up to 3/8” (10mm)For signs/shelves up to 1/4” (7mm)thickItem Code: Finish:WM01 Satin ChromeFor signs/shelves up to 3/8” (10mm)thickItem Code: Finish:WM02 Satin ChromethickWM01WM02Project 5mm from wall- supports that can be usedvertically for signs or horizontallyto support shelves- available in 2 sizes to holdsigns/shelves up to 3/8” (10mm)thickFor signs/shelves up to 1/4” (7mm)thickItem Code: Finish:WM03 Satin ChromeFor signs/shelves up to 3/8” (10mm)thickItem Code: Finish:WM04 Satin ChromeWM03WM04HooksHook- for panels up to 1/8” (3mm)thick with holesPicture hookItem Code: Finish:WM07 Satin ChromeItem Code:WM06Finish:Satin ChromeSupport for wooden sign or shelf- support that can be usedvertically for signs or horizontallyto support shelvesRetaining screw- to hold glass shelf or sign fittedwith WM10- holds 1/4” (6mm) thick as standard- can be locked to any angle- plastic insert to protect glassUseverticallyto supportsignsUsehorizontallyto supportshelves- for glass shelves add P08retaining screwItem Code: Finish:WM10 Satin Chrome- hole 1/4” (6mm) dia, 1/2” (12mm)from edgeItem Code:P08Finish:Satin ChromeDecorative wall plate- decorative plate that can bepositioned under any standardwall mount or sign support- creates an up-marketappearance and provides addedstrength to the installation- 1½” (38mm) diameterFixing panel to wall- screw fix panel to wall- 1/2” (12.5mm) spacerItem Code:P01Finish:Satin ChromeItem Code: Finish:KPP-1 Satin ChromeFull dimensions - p6815

*CeilingfittingCrimpedcable endCovercapCableCable systems** Projects designed and installedby Atlas Display (DHB) LtdBottomcovercreativeflexiblehighestqualityeasy toinstall*• Choose from 1.5mm or 3mmthick galvanised steel cables -will not fray, kink or mark,unlike stainless steel• 1.5mm cable supports up to264lbs. (120kg), 3mm cableup to 440lbs. (200kg)• Designed and manufactured tothe highest possiblestandards of quality• Life time guarantee on allmetal components• Extensive range ofcomponents and accessoriesensures complete designflexibility• Low-voltage lighting can befully integrated onto the cablesystems• Stylish yet discreet design• Easy to install, with aninstallation service available ifrequired• Available in standard finish -satin chrome. Polishedchrome, brass and specialfinishes are available onrequestSpringtensionerWasherCableendfixingFloorfitting16

1.5mm cable - fitting optionsCeiling to floor Ceiling to wall Wall to wall Wall to floor Angled topand bottom- the basic kit for fixingbetween ceiling and floor- includes top and bottomfittings, 13’1” (4m) ofcable and spring tensioner- also available withinsulated cable for usewith lighting onexhibition stands- ideal for supportingsigns and graphics- includes top and bottomfittings, spring tensionerand 9’10” (3m) cable- use for suspending signsand graphics- includes top and bottomfittings, spring tensionerand 9’10” (3m) cable- use for suspending signsand graphics- includes top and bottomfittings, spring tensionerand 9’10” (3m) cable- use on sloping or flatsurfaces- includes top and bottomfittings, spring tensionerand 13’1” (4m) cableItem code: Finish:CA4 Satin ChromeWith insulated cable:CA4S Satin ChromeItem code: Finish:CCW Satin ChromeItem code: Finish:CWW Satin ChromeItem code: Finish:CWF Satin ChromeItem code: Finish:Angled top to angled bottom:CAA Satin ChromeAngled top to regular bottomfitting:CAF Satin Chrome*K3LTRL K3LTRKW21620 KW21620LItem code: Item:Item code: Item:K3LTR KitKW21620 KitK3LTRL KitKW21620L KitStandard finish satin chrome, all other finishes on requestAll cables can be supplied in longer lengths.PolishedChrome:PolishedBrass:17

1.5mm cable - fitting optionsCeiling suspended fittingsCeiling fitting suppliedwith 6’6” (2m) longcable- ideal forsupporting signsTop cablefitting andpanel clamp- 6’6” (2m) longcable with topfitting and panelclamp to take upto 1/4” (7mm) or3/8” (10mm) thickpanel- ideal forsupporting signsCeiling fittingwith cable andweight- top fitting with 13’1”(4m) long cable andbottom weight measuring4” h x 1¼” dia.(100mm h x 30mm dia.)Weight 1¼ lbs. (.55kg)- weight ensures taut cablefor signs and bannersFor panels up to1/4” (7mm) thickItem Code:CCTFinish:Satin ChromeItem Code: Finish:KC2-CG05 Satin ChromeFor panels up to3/8” (10mm) thickItem Code:KC2-CG05-10Finish:Satin ChromeAngled ceilingfitting withcable andweight- wall mounted supportwith adjustable angle.Weight 1¼ lbs. (.55kg)- weight ensures tautcable for signs andbannersItem Code:C2Finish:Satin ChromeItem Code:CATFinish:Satin ChromeQuick fit cableExtra strong ceiling/wall fitting- can be used with any standardceiling fitting or wall mountItem Code:HDSFinish:Satin ChromeDecorative cover disc- thread through- cable design to be used withchannel top and bottom- includes 13’1” (4m) of cable, 2quick fit toggles & springtensionerNot to be used with lighting- can be used with any standardcable or 3mm rod- use below false ceiling to hidehole, giving a professional finishItem Code: Finish:CD-4 Satin ChromeItem Code:CQQFinish:Satin ChromeDecorative support plate- can be used with any standardceiling fitting or wall mountItem Code: Finish:P01-PC01 Satin ChromeFull dimensions - p68Standard finish satin chrome, all other finishes on request18PolishedChrome:PolishedBrass:

1.5mm cable - fitting optionsDouble Vertical cable Supports fittings- available in 6” (150mm) and 12” (300mm) cable centers- creates a stylish support for shelving and graphicsWall to wall fittings with two 9’10” (3m) cables6” (150mm) cable centersItem Code:C2WW-15Finish:Satin chrome6” or 12”cable centers12” (300mm) cable centersItem Code:C2WW-30Finish:Satin chrome6”or12”Wall to floor fittings withtwo 9’10” (3m) cables6” (150mm) cable centersItem Code:C2WF-15Finish:Satin chrome12” (300mm) cable centersItem Code:C2WF-30Finish:Satin chromeKWS72523Ceiling to wall fittings withtwo 9’10” (3m) cables6” (150mm) cable centersItem Code:C2CW-15Finish:Satin chrome12” (300mm) cable centersItem Code:C2CW-30Finish:Satin chromeTwin cable fittingsTwin cable with singleceiling fitting- single ceiling fitting, with two13’1” (4m) long cables fixed tothe floor- spacer bar to ensure cablecenters 12” (300mm)- other sizes available on request- tensioners fitted at bottomItem Code:C2A4FFinish:Satin ChromeAll cables can be supplied in longer lengths.Standard finish satin chrome, all other finishes on requestPolishedChrome:Full dimensions - p68PolishedBrass:19

Panel clamps - 1.5mm cableVertical clampsFor panels up to 1 ⁄8” (4mm) thick:SingleItem Code: Finish:SingleCG03 Satin ChromeFor panels up to 1 ⁄4” (7mm) thick:SingleItem Code: Finish:SingleCG01 Satin ChromeDoubleCG04Satin ChromeDoubleCG02Satin ChromeDoubleDoubleFor panels up to ½” (12.7mm) thick:Item Code: Finish:CG14 Satin ChromeFor panels up to ½” (12.7mm) thick with holes:- with insert for holes. Supportstwo 6mm thick glass panels withposter between.Item Code:CG08Finish:Satin ChromeMulti-position clamps - can be locked at any angleFor panels up to ¼” (7mm) thick:For panels up to 3 ⁄8” (10mm) thick:Single Item Code: Finish:SingleItem Code: Finish:SingleSingleCG11 Satin ChromeCG13 Satin ChromeDoubleCG21Satin ChromeDoubleCG23Satin ChromeDoubleDoubleClamps for wide panels- top/bottom clamps for panels wider than Single the distance between cablesFor panels up to ¼” (7mm) thick:Multi-position clamps for panels up to ¼” (7mm)thick:Single- can be locked into any positionItem Code: Finish:CG09 Satin Chrome Item Code: Finish:SingleCG12 Satin ChromeDoubleCG22Satin ChromeDoubleStandard finish satin chrome, all other finishes on request20For acrylic accessories see pages 40-45PolishedChrome:Full dimensions - p68PolishedBrass:

Panel supports - 1.5mm cableSupports for panels with holesFor panels 3 ⁄16” - ¼” (5-6mm) thickSingle- hole size 1/4” (6mm) diameter- supports for panels up to 3/4”(20mm) thick available on requestItem Code:SingleCS13Finish:Satin ChromeDoubleDoubleCS23Satin ChromeCS13 & CS23for extra thick panels up to3/4”, specify size required.Ref example: CS13/SSupports for screw fix panelsSingleDoubleSupport- support for any item fittedwith boss fitting - see P02Item Code: Finish:SingleCS03 Satin ChromeDoubleCS04Satin ChromeP02 Boss- Boss for use with supportsCS03/CS04- use with up to No. 10countersunk wood screw or boltItem Code: Finish:P02 NickelP02-2 Boss- as above, but double sided, toattach two components togetherItem Code: Finish:P02-2 NickelHooksHook for panels up to 1/9” (3mm) thick with holesPicture hooksSingleItem Code:SingleCH01Finish:Satin ChromeSingle Item Code: Finish:SingleCS12 Satin ChromeDoubleCH02Satin ChromeDouble - not shownCS22 Satin ChromeDoubleNylon tip screwsAll panel and shelving clamps are supplied with nylon tip as standard*- nylon tip protects glass and acrylic* except CG03, CG04For spare screws see page 28Full dimensions - p68Standard finish satin chrome, all other finishes on requestPolishedChrome:PolishedBrass:21

Shelf supports - 1.5mm cableUnder-shelf support- locates under shelf- inconspicuous- for drilled and slotted shelf- shelf hole size 10mm, slotwidth 2mmItem Code:CS01*Please use metric sizing when drilling glass.Finish:Satin ChromeSupports for wooden or glass shelvesShelf supportSingle- adjustable to any angle of slope- can be locked into position- for glass shelves add ref. P08(see right)Item Code: Finish:SingleCS11 Satin ChromeScrew to retain glass shelvesUsed with CS11 or CS21 to hold6mm thick as standard- flush finish- plastic insert to protect glass- hole 6mm dia, 6mm thick glass- hole 12mm from the edge ofglassDoubleCS21Satin ChromeItem Code:P08Finish:Satin ChromeDouble*For drilled glass use metric measurement to be exact.Clamps for glass shelvesClamp for glass shelves up to ¼” (7mm) thick Clamp for glass shelves up to ½” (12.7mm) thickSingle- for glass shelves without holes - for glass shelves without holesItem Code:SingleCG06Finish:Satin ChromeItem Code:CG15Finish:Satin ChromeDoubleCG07Satin ChromeDoubleMulti-position clamps for glass shelvesMulti-position clamp for glass shelvesup to ¼” (7mm) thickSingle- adjustable to any angle- can be locked into positionMulti-position clamp for glass shelvesup to 3 ⁄8” (10mm) thickSingle- adjustable to any angle- can be locked into positionItem Code:SingleCG11Finish:Satin ChromeItem Code:SingleCG13Finish:Satin ChromeDoubleCG21Satin ChromeDoubleCG23Satin ChromeDoubleDoubleStandard finish satin chrome, all other finishes on request22PolishedChrome:Full dimensions - p68PolishedBrass:

Shelf & rod supports - 1.5mm cableSupports to hold rodsRod supportSingle- for 6mm diameter rods- rods will hold acrylic pockets,leaflet holders, banners &graphicsItem Code:SingleCS05Finish:Satin Chrome8.5x11 LTRPage 41CS09RECDoubleCS06Satin ChromeNot more than 19¾” (500mm)DoubleCA4Page 17CS05Rod support - fixed position- to hold 6mm rodItem Code: Finish:CS09 Satin ChromeRod support - Multi-position- to hold 6mm rod- can be locked in any positionItem Code: Finish:CS07 Satin ChromeSee page 43 for Acrylic Hook-on AccessoriesUnthreaded rod - 6mm diaItem Code: Finish:19¾” (0.5m) rodR500P Satin Chrome39 1 ⁄3” (1m) rodR1000P Satin ChromeRod end capsItem Code: Finish:End cap for 6mm rodREC Satin ChromeBlack PVC end cap for 6mm rodREC-P/BL BlackFull dimensions - p68Standard finish satin chrome, all other finishes on requestPolishedChrome:PolishedBrass:23

Cable & panel clamps - 3mm cable3mm cable13’1” (4m) cablewith ceiling tofloor fixings3mm cable supports up to 440lbs.,giving all the advantages of arobust appearance with thesmallest size supports on themarket. Fittings have the samecable centers as 1.5mm cable. Seepage 26 for installation accessories.Decorative cover disc - thread through- can be used with any standardcable or 3mm rod- use below false ceiling to hidehole, giving a professional finishItem Code: Finish:CD-4 Satin Chrome- includes spring loaded tensioner- the basic kit for fixing betweenceiling and floor- all cables can be supplied inlonger lengthsDecorative support plate- can be used with any standardceiling fitting or wall mountItem Code:CA4-3Finish:Satin ChromeItem Code: Finish:P01-PC01 Satin ChromeVertical clampsFor panels up to ¼” (7mm) thickItem Code: Finish:CG01-3 Satin ChromeFor panels up to ½” (12.7mm) thickItem Code: Finish:CG14-3 Satin ChromeClamps for wide panels- Top/bottom supports for panels wider than the distance between cablesSingleDoubleFor panels up to ¼” thick- adjustable to any angle- can be locked into positionItem Code:SingleCG12-3DoubleCG22-3Finish:Satin ChromeSatin ChromeSupports for panels with holesFor panels 3 ⁄16”-¼” (5-6mm) thickSingle- hole size 1/4” (6mm) diameter- supports for panels up to 3/4”(20mm) thick available on request(reference CS13/S)Item Code: Finish:SingleCS13-3 Satin ChromeDoubleDoubleCS23-3Satin ChromeStandard finish satin chrome, all other finishes on request24PolishedChrome:Full dimensions - p68PolishedBrass:

Panel & shelf supports - 3mm cableMulti-position clamps for panels and shelvesFor panels up to ¼” (7mm) thickSingle- adjustable to any angle- can be locked into positionFor panels up to 3 ⁄8” (10mm) thickSingle- adjustable to any angle- can be locked into positionItem Code:SingleCG11-3Finish:Satin ChromeItem Code:SingleCG13-3Finish:Satin ChromeDoubleCG21-3Satin ChromeDoubleCG23-3Satin ChromeDoubleClamp for glass shelvesFor panels up to ½” (12.7mm) thickItem Code: Finish:CG15-3 Satin ChromeDoubleUnder-shelf support- locates under shelf- shelf is drilled - hole size 10mm- inconspicuousItem Code: Finish:CS01-3 Satin Chrome*Please use metric sizing when drilling glass.Supports for wooden or glass shelvesShelf supportSingle- adjustable to any angle of slope- can be locked into position- for glass shelves add ref. P08(see right)Item Code: Finish:SingleCS11-3 Satin ChromeDoubleCS21-3Satin ChromeScrew to retain glass shelvesUsed with CS11-3 or CS21-3to hold 6mm thick as standard- flush finish- plastic insert to protect glass- hole 6mm dia, 6mm thick glass- hole 12mm from the edge ofglassItem Code: Finish:P08 Satin ChromeDouble*Please use metric sizing when drilling glass.Supports for screw fix panels- support for any item fittedwith boss fitting P02- perfect to support hangingrails - page 47Item Code: Finish:CS03-3 Satin ChromeP02 Boss- Boss for use with supportsCS03/CS04- use with up to No. 10countersunk wood screw or boltItem Code: Finish:P02 NickelHooksHook for panels up to 1/9” (3mm) thick with holesSingleDoubleItem Code: Finish:SingleCH01-3 Satin ChromeDoubleCH02-3Satin ChromeFull dimensions - p68Standard finish satin chrome, all other finishes on requestPolishedChrome:PolishedBrass:25

Installation accessoriesfor cable & rodinstallationsBracketsSingle wall bracketKMSB-25/SIKMSB/SIKMSB-100/SIChannels and toggle fittingsDovetail channel- available in 3 sizes- all units can be fitted to thewall using up to no 10 screws- supplied with nut and bolt toconnect cable/rod to bracketSize:KMSB-25/SI: 1¼” (30mm) height, 1½”(35mm) depth, cable fixing: 1” (25mm)from wallKMSB/SI: 2 1 ⁄3” (60mm) height, 2 1 ⁄3”(60mm) depth, cable fixing: 2” (50mm)from wallKMSB-100/SI: 4 1 ⁄3” (110mm) height,4 1 ⁄3” (110mm) depth, cable fixing: 4”(100mm) from wallItem Code: Finish:KMSB-25/SI SilverKMSB/SI SilverKMSB-100/SI SilverRebate channelTriangular wall bracket6’6” (2m) dovetailchannel- for ceiling, floor or wall mounting- makes cables/rods fully moveable- stylish appearance- order suitable toggle to connectcable/rod to the channel(see below)Item Code: Finish:ACD-2 2m silverACD-1 1m silver- supplied with 2 nuts and boltsto connect cables/rods tobracket- supports 2 cables/rods 12”(300mm) apart- hi-tech appearance- can be used as a canopy or signsupportSize: 13¾” (350mm) height, 13¾”(350mm) depth, cables/rods project1 9 ⁄16” (40mm) and 13 3 ⁄8” (340mm)from the wallItem Code: Finish:KMDB/SI Silver8’ (2438mm) rebatechannel- for rebating into floor or shelveswith a flush finish- makes cables/rods fully moveable- order suitable toggle to connectcable/rod to the channel(see below)Item Code: Finish:V8 Silver8’ double sided channel Quick fit cable- cable design to be used with- for wall mounting with wallbrackets and togglesItem Code: Finish:ACL Silverchannel top and bottom- includes 13’1” (4m) of cable, 2quick fit toggles & springtensionerNB Not to beused withlightingItem Code:CQQFinish:Satin ChromeToggleATEasy fittoggleK1008S-M5Item Code: Finish:AT Silver- for fixing cables/rods tochannels- can be used with all top andbottom fittings- supplied complete with allenkey, 12mm and 14mm longscrewsItem Code:K1008S-M5Finish:SilverQuick fit toggle- brass toggle that screws intothe top end of a cable/rod orwall fitting- fits directly into almost anymake of channel- invisible when usedItem Code: Finish:PC01-Q Brass for cablePR01-Q Brass for rodIsolatorsAdd isolators when using channelor installing into metal ceilings orfloorsTop isolator- Black nylon for cables,white nylon for rodsTop isolatorCode:PC01/I For cablesPR01/I For rodsTopIsolatorBottom isolator- in 3 nylon sectionsBottom isolatorCode:SP/IS For cables & rodsBottomIsolatorIn-line rod isolator- insert when metalaccessories touch bothrods to avoid fusingIn-line isolatorCode:LIJ For 6mm rodsFull dimensions - p6826PolishedChrome:PolishedBrass:

Channel installation ideasfor cable & rodinstallationsACL channel can be mounted onthe wall or fixed from a windowframe by using KMSB supports,allowing aprojection up to100mmChannel solves manyinstallation challenges:- use channel when you wishto change the poster sizesand need different cable/rodcenters- use channel to create afeature area- use channel to bring thedisplay away from the wall orwindow- use channel to bridge over apoor fixing area- channel allows tremendousfixing flexibility. You canposition cables anywherealong their lengthBottom rodfitting withAT toggleACL channel with quick fit cable (ref: CQQ)27

Promotional materials and sparesSamplesIncrease your sales by using samples which enable you to show the quality and designof the product. Remember - once your client sees and touches the product theynormally purchase, as they are so delighted with the quality and design. The sampleshave been vastly reduced in price and are NOT subject to any discounts.Sample snake- 1.5mm cable supplied withtop/bottom fittings.- length 39 1 ⁄3” (1m)- fittings: CG01, CG02, CG03/PC,CG04, CG06, CG09, CG11,CS01/BR, CS13Item Code:CSCSample 3mm rod- 3mm rod 4” (100mm) lengthsupplied with REC end cap and aCG03 supportSample frame- complete frame ideal fordropping in your briefcase- extensive rangeof cable and rodsamples with a1/3 A4 acrylicpocket- size 17”(430mm) wide x12 3 ⁄16” (310mm)highItem Code:CSFItem Code:RB1-SFreestyle sample frame- supplied with quick fit cablesand a business card holdersupported with CG03 supportsItem Code:SFSSample casesSmall- small lightweight blue plasticcase with cables/rods and wallmounted supports- 13¾” w x 11 3 ⁄16” h x 2 9 ⁄16” d(350mm w x 300mm h x 65mm d)Large:Large heavy duty black plastic casewith a comprehensive range ofcable/rod fittings, plus low voltagelighting sample- 15 3 ⁄8” w x 11 3 ⁄8” h x 5 5 ⁄16” d(390mm w x 290mm h x 135mm d)Screws & Miscellaneous Brochures fittingsItem Code: Size:SC/S SmallSC/L LargeGrubscrews for fittings- sparegrubscrews foruse withfittingsNylon tipped screws- protects glass and acrylicBare cable- 1.5mm diameter cable- available in 5 lengths- supplied with copper crimpsItem Code:P13G/SP12P11P16P18M3 x 3mmM3 x 6mmM5 x 6mmM4 x 6mmM4 x 4mmItem Code:P10M6 x 10mmItem Code: Length:BC1 39 1/3” (1m)BC2 6’6’ (2m)BC3 9’10” (3m)BC4 13’1” (4m)BC5 16’4” (5m)28

CeilingfittingCovercapRodRod systemsBottomcoverFloorfittingdynamicstrongvisualstatementhighestqualityRod systems to suit yourdesign and budget• 3mm rods support up to132lbs. (60kg)• 6mm & 10mm rods can supportup to 440lbs. (200kg)• Greater stability than the cablesystems, with a dynamic yetelegant look• Designed and manufactured tothe highest possible standardsof quality• Life time guarantee on all metalcomponents• Extensive range of componentsand accessories ensurecomplete design flexibility• Ideal for vertical and horizontalpresentations• Easy to install with aninstallation service available ifrequired• Available in standard finish -satin chrome. Polished chrome,brass and special finishes areavailable on request6mm3mm10mm29

Clamps - 3mm rodVertical clampsFor panels up to 1 ⁄8”(4mm) thickSingle- non-removable panel clamp forpanels up to 1/8” (4mm) thickItem Code: Finish:SingleCG03-3 Satin ChromeDoubleCG04-3 Satin ChromeFor panels up to¼” (7mm) thick:For panels up to½” (12.7mm) thick:DoubleItem Code:CG01-3Finish:Satin ChromeItem Code:CG14-3Finish:Satin ChromeHorizontal barHorizontal 10mm bar- 10mm bar designed to take 4 x3mm rods at 9 5 ⁄8” (244mm) rodcenters, which can be used withCG03-3 or CG04-4 to hold easyaccess pockets- overall length 30 1 ⁄6” (764mm)- rod centers 28 13 ⁄16” (732mm)End caps for 10mm barItem Code:HR10-3Finish:Satin Chrome- add two REC-10 for eachhorizontal bar orderedItem Code:REC-10Finish:Satin ChromeMulti-position clamps for panels and shelvesFor panels up to ¼” (7mm) thickSingle- adjustable to any angle- can be locked into positionFor panels up to 3 /8” (10mm) thickSingle- adjustable to any angle- can be locked into positionItem Code:SingleCG11-3DoubleCG21-3Finish:Satin ChromeSatin ChromeItem Code:SingleCG13-3DoubleCG23-3Finish:Satin ChromeSatin ChromeDoubleDoubleClamps for wide panelsFor panels ¼” thickSingleDouble- Top/bottom supports for panelswider than the distance betweencables- adjustable to any angle- can be locked into positionItem Code: Finish:SingleCG12-3 Satin ChromeDoubleCG22-3 Satin ChromeSupports for panels with holesFor panels 3 ⁄16”-¼” (5-6mm) thickSingleDouble- hole size 1/4” (6mm) diameter- supports for panels up to 3/4”(20mm) thick available on requestItem Code: Finish:SingleCS13-3 Satin ChromeDoubleCS23-3 Satin ChromeFull dimensions - p6831

Supports - 3mm rodMulti-position supports to hold rodsSupport to hold 6mm rods- holds 6mm diameter rod at anyangle- rods will hold acrylic pockets,leaflet holders, banners &graphics- can be locked into positionSupport to hold 10mm rods- holds 10mm diameter rod atany angle- can be locked into positionItem Code:RR01-3/6Finish:Satin ChromeItem Code: Finish:RR01-3/10 Satin ChromeHooksHook for panels up to 1 ⁄9” (3mm) thick with holesSingleItem Code: Finish:SingleCH01-3 Satin ChromeDoubleCH02-3 Satin ChromePicture hook- can also be used on 3mm cableItem Code: Finish:CS12-3 Satin ChromeDoubleUnder-shelf support- locates under shelf- for shelf with 10mm hole- shelf is drilled- inconspicuousItem Code: Finish:CS01-3 Satin Chrome*For drilled glass use metric measurementRod support for 6mm rod- for 6mm diameter rods- rods will hold acrylic pockets,leaflet holders, banners &graphicsClamp for glass shelvesFor panels up to½” (12.7mm) thickItem Code: Finish:CG15-3 Satin ChromeSupports for screw fix panels- Support for any item fitted withboss fitting P02- perfect to support hanging railsItem Code: Finish:CS03-3 Satin ChromeItem Code:CS05-3Finish:Satin ChromeSupportCS03-3BossPO2Item Code:P02Finish:NickelSupports for wooden or glass shelvesShelf supportSingle- adjustable to any angle of slope- can be locked into position- for glass shelves add ref. P08(see right)Item Code: Finish:SingleCS11-3 Satin ChromeDoubleCS21-3 Satin ChromeScrew to retain glassshelvesUsed with CS11-3 or CS21-3to hold 6mm thick as standard- flush finish- plastic insert to protect glass- hole 6mm dia, 6mm thick glass- hole 12mm from the edge ofglassItem Code: Finish:P08 Satin ChromeDouble*For drilled glass use metric measurement32Full dimensions - p68

Supports - 6mm rodSupports for screw fix panelsSingleSupport- support for any item fitted withboss fitting P02 - see rightItem Code: Finish:SingleRS03 Satin ChromeP02 Boss- Boss for use with supportsRS03/RS04- use with up to No. 10countersunk wood screw or boltItem Code: Finish:P02 NickelDoubleDoubleRS04Satin ChromeP02-2 Boss- as above, but double sided, toattach two components togetherItem Code: Finish:P02-2 NickelSign supportFor panels up to ¼” (7mm) thick- Supports signs from aboveItem Code:RG05Finish:Satin ChromeLight weight card signs only(sign should weigh 200g max.)See page 18 for heavy signsystems.HooksHook for panels up to 1 ⁄9” (3mm) thick with holesPicture hooksSingle Item Code: Finish:SingleDoubleRH01 Satin ChromeDoubleRH02Satin ChromeSingleItem Code:SingleRS12DoubleRS22Finish:Satin ChromeSatin ChromeUnder-shelf support- locates under shelf- shelf requires 10mm diameterhole- non-removable supportItem Code:SingleRS01Finish:Satin Chrome*For drilled glass use metric measurementFull dimensions - p68PolishedChrome:PolishedBrass:35

Shelf supports - 6mm rodSupports for wooden or glass shelvesShelf supportSingle- adjustable to any angle of slope- can be locked into position- for glass shelves add ref. P08(see right)Item Code: Finish:SingleRS11 Satin ChromeDoubleRS21Satin ChromeScrew to retain glass shelvesUsed on on RS11 or RS21to hold 6mm thick as standard- flush finish- plastic insert to protect glass- hole 6mm dia, 6mm thick glass- hole 12mm from edge of glassItem Code: Finish:P08 Satin ChromeDoubleClamps for glass shelves and panels*For drilled glass use metric measurementClamp for glass shelves up to ¼” (7mm) thickSingle- for glass shelves without holesItem Code:SingleRG06Finish:Satin ChromeDoubleDoubleRG07Satin ChromeMulti-position clamps for glass shelves and panelsMulti-position clamp for glass shelves and panelsup to ¼” (7mm) thickSingle- adjustable to any angle- can be locked into positionMulti-position clamp for glass shelves and panelsup to 3 /8” (10mm) thickSingle- adjustable to any angle- can be locked into positionItem Code:SingleRG11Finish:Satin ChromeItem Code:SingleRG13Finish:Satin ChromeDoubleRG21Satin ChromeDoubleRG23Satin ChromeDoubleDoubleSupports to hold rodsRod supportSingle- for 6mm diameter rods- rods will hold acrylic pockets,leaflet holders, banners &graphics etc.Item Code: Finish:SingleRS05 Satin ChromeRod support - Multi-position- to hold 6mm rod- support for rods at any angle- can be locked into positionItem Code: Finish:RR01 Satin ChromeDoubleRS06Satin ChromeDoubleSee page 33 for 6mm Diameter RodsSee page 43 for Acrylic Hook-on AccessoriesFull dimensions - p6836PolishedChrome:PolishedBrass:

Panel clamps - 10mm rodVertical clampsFor panels up to ¼” (7mm) thick:For panels up to ½” (12.7mm) thick:SingleItem Code: Finish:SingleRG01-10 Satin ChromeDoubleRG02-10 Satin ChromeItem Code: Finish:RG14-10 Satin ChromeDoubleMulti-position clampsFor panels up to ¼” (7mm) thick:Single- adjustable to any angle- can be locked into positionFor panels up to 3 ⁄8” (10mm) thickSingle- adjustable to any angle- can be locked into positionDoubleItem Code: Finish:SingleRG11-10 Satin ChromeDoubleRG21-10 Satin ChromeDoubleItem Code: Finish:SingleRG13-10 Satin ChromeDoubleRG23-10 Satin ChromeMulti-position clamps for wide panelsFor panels up to ¼” (7mm) thickSingleDouble- top/bottom supports for panelswider than the distance betweenrods- adjustable to any angle- can be locked into positionItem Code: Finish:SingleRG12-10 Satin ChromeDoubleRG22-10 Satin ChromeSupports for panels with holesFor panels 3 ⁄16”-¼” (5-6mm) thickSingleDouble- hole size 1/4” (6mm) diameter- to hold standard panels3/16”-1/4” (5-6mm) thick- for extra thick panels up to ¾”(20mm), specify size required.(reference RS13-10/S)Item Code: Finish:SingleRS13-10 Satin ChromeDoubleRS23-10 Satin ChromeHooksHook for panels up to 1 /9” (3mm) thick with holesPicture hookSingleItem Code:SingleRH01-10DoubleRH02-10Finish:Satin ChromeSatin ChromeSingleItem Code:RS12-10Finish:Satin ChromeDouble38All 10mm rod fittings shown here are NON-REMOVABLE and are threaded onto the rod at the time of installationFull dimensions - p68

Supports - 10mm rodSupports for wooden or glass shelvesShelf supportSingle- adjustable to any angle of slope- can be locked into position- for glass shelves add ref. P08(see right)Item Code: Finish:SingleRS11-10 Satin ChromeDoubleRS21-10 Satin ChromeScrew to retain glass shelvesUsed on on RS11-10 or RS21-10to hold 6mm thick as standard- flush finish- plastic insert to protect glass- hole 6mm dia, 6mm thick glass- hole 12mm from the edge ofglassItem Code: Finish:P08 Satin ChromeDouble*For drilled glass use metric measurementClamp for glass shelves and panelsSupports to hold rodsClamp for glass shelves up to ¼” (7mm) thickSingleDouble- for glass shelves without holesItem Code: Finish:SingleRG06-10 Satin ChromeDoubleRG07-10 Satin ChromeRod support for 6mmrod- to take 6mm diameter rods- rods will hold acrylic pockets,leaflet holders, banners &graphicsItem Code: Finish:SingleRS05-10 Satin ChromeDoubleRS06-10 Satin ChromeSupports for screw fix panelsSingleDoubleSupport- support for any item fitted withboss fitting P02 (see right)Item Code: Finish:SingleRS03-10 Satin ChromeDoubleRS04-10 Satin ChromePO2 Boss- Boss for use with supportsRS03-10/RS04-10- use with up to No. 10countersunk wood screw or boltItem Code: Finish:P02 NickelMulti-positional supports to hold rodsSupport to hold 6mm rods- to hold 6mm diameter rods- rods will hold acrylic pockets,leaflet holders, banners &graphics etc.Support to hold 10mm rods- to hold 10mm rod- support for rods at any angle- can be locked into positionItem Code: Finish:RR01/6-10 Satin ChromeItem Code:RR01-10Finish:Satin ChromeSee page 33 for 6mm Diameter Rods.See page 43 for Acrylic Hook-on Accessories.All 10mm rod fittings shown here are NON-REMOVABLE and are threaded onto the rod at the time of installationFull dimensions - p6839

Accessories canmake an enormousdifference to thepower of yourpresentation.Create highlyattractive hardworkingprojectsGraphicdisplayYour choice offinishes & materialMore than just clear acrylic...be adventurous and turn asimple design into somethingspectacular...Imagery...Screen printingCreate high quality text and logoimages.Vinyl letteringAn inexpensive option, ideal forsimple lettering.Acrylics...Non-reflective acrylic - used toincrease visibility in sunnywindows or to reduce the glarefrom spot lighting.Green edge - looks like glass.Sandblast effect - looks likesandblasted glass and does notshow dust. Creates impressivescreens and background panels.Colored acrylic - solid colorscreate ideal backgound panels.4023

Acrylic pockets & poster holdersA wide range of pocket types and sizes are available to suit any displayrequirement. Shown here are just some of the options available - if youwant a special size or shape, please call to discuss your requirements.Easy access pocketsPortrait and landscape pockets inclear acrylic, available in a widerange of sizes.- designed to be used withcable/rod systems or wallmounted supports (WM09,WM05-13 with WMS-2)Jumbo pocketsDouble sided acrylic pocketdesigned to take very largeposters. Made to order - pleasecall for details.‘C’ shaped pocketsA poster display that has adecorative back panel which canbe screen printed with logos ortext. Back panel can be suppliedstraight or with decorative‘ragged’ edge. Made to orderonly - please call.Easy access pockets- portrait and landscape pockets in clear acrylic with polished edges- available in a wide range of sizes- custom sizes availablePortrait pockets- Sizes 16” x 20” and up are supplied with top clip as standardItem 1.5mm & 3mm 6mm 10mmCode: Size: Cable/Rod centers: Rod centers: Rod centers:EAP8.5x11 Letter 9 7/8” 10 1/8” 10 1/4”EAP16x20 16” x 20” 17 3/8” 17 5/8” 17 3/4”EAP22x28 22” x 28” 23 3/8” 23 5/8” 23 3/4”EAP24x36 24” x 36” 25 3/8” 25 5/8” 25 3/4”Landscape pockets- 20” x 16” and up are supplied with top clip as standardItem 1.5mm & 3mm 6mm 10mmCode: Size: Cable/Rod centers: Rod centers: Rod centers:EAP8.5x11 Letter 12 3/8” 12 5/8” 12 3/4”EAP20x16 20” x 16” 21 3/8” 21 5/8” 21 3/4”EAP28x22 28” x 22” 29 3/8” 29 5/8” 29 3/4”EAP36x24 36” x 24” 37 3/8” 37 5/8” 37 3/4”Spare top clips- for use with landscape andportrait easy access pocketsItem Code:MRCDouble and treble width pockets- double and treble width 8.5” x 11” portrait pockets in 1/8” thick clear acrylicItem 1.5mm & 3mm 6mm 10mmCode: Size: Cable/Rod centers: Rod centers: Rod centers:EAPDBLLTR Letter x 2 pockets 18 5/8” 18 7/8” 19”EAPTRPLLTR Letter x 3 pockets 27 3/8” 27 5/8” 27 3/4”*see page 8 for metric conversionCable/rod centers shown refer to fixed position clamps only e.g. CG01, CG03(p16), CG01-3, CG03-3 (p27), RG01 (p30), RG01-10 (p34)41

Acrylic pockets & poster holdersTop fixing pocketTop fixing pockets- designed to be suspended fromthe top- 1/8” thick acrylic, supplied withtop clip- use with KC2-CG05 (p14)- custom sizes availableItem Code: Size:TH16x20 16” x 20”TH22x28 22” x 28”TH24x36 24” x 36”Pocket frames - for suspension on cablesSolid natural beech frames that attach directly to the cables, with noadditional fittings- complete with U-shaped acrylic pockets- all units double sided- profile size: 7/8” (22mm) wide x 3/4” (20mm) deep- available in European sizes onlyItem Size: 1.5mmCode: Cable centres:WFA5 A5 182mmWFA4 A4 244mmWFA3 A3 331mmWFA2 A2 454mmEUROPEAN PAPER SIZE : A5 =148 x 210mm A4 = 210 x 297mm A3 =297x 420mm A2 = 420 x 594mm A1 = 594 x 841mm A0 = 841 x 1188mmWall mounted easy access pockets with holes- to be mounted directly onto wall- use with WM05-13, WM05L-20 (p9)Portrait pockets withholesItem Code: Size:EAP8.5x11-WM LetterEAP16x20-WM 16” x 20”EAP22x28-WM 22” x 28”EAP24x36-WM 24” x 36”Landscape pocketswith holesItem Code: Size:EAP11x8.5-WM LetterEAP20x16-WM 20” x 16”EAP28x22-WM 28” x 22”Wall mounted frameless acrylic poster holders- two part pocket with a fixed back panel in foam board, which screwsdirectly to the wall. Hook-on acrylic front creates a frameless posterdisplay that is flat against the wall with no visible fixing- no tools required to change the posterPortraitItem Code: Size:HPKT8.5x11 LetterHPKT16x20 16” x 20”HPKT22x28 22” x 28”HPTK24x36 24” x 36”LandscapeItem Code: Size:HPKT11x8.5 LetterHPKT20x16 20” x 16”HPKT28x22 28” x 22”*see page 8 for metric conversion42

Hook-on accessories for use on wall-mounted rodsHook-on easy access pockets- pockets designed to be usedwith horizontal rods. Just hookon in desired positionPortraitItem Code: Size:HLTR LetterH16x20 16” x 20”H2228 22” x 28”LandscapeItem Code: Size:HLTRL LetterH2016 20” x 16”H2822 28” x 22”- available in kit of 4 x letter sizeportrait pockets, complete with 39 1 ⁄3”(1m) of 6mm diameter rod and wallfixingsKit - 4 x Letter portrait pocketsItem Code: Size:KHLTRW Kit 4 x LTRL-shaped supportTo be used with wall-mountedhook-on pockets, where WM11supports have been used to fixrods to the wall- keeps pockets hanging vertically- supplied with doublesided adhesiveItem Code:HASHook-on leaflet dispensers- letter portrait hook-on leafletdispenser. Just hook on in desiredposition- 1/8” thick acrylic, 1½”internal depth- Letter sized as standard - othersizes on requestItem Code:HLTRD LetterKHLTRD- available in kit of 4 x letter sizeportrait dispensers, complete with1m of 6mm diameter rod and wallfixingsKit - 4 x letter size portrait dispensersItem Code: Size:KHLTRD 4 x LTRHook-on sloping shelf with lip- sloping shelves used with wallmountedhorizontal rods- 1/8” thick acrylic, 1 1/2” deeplip- supplied with triangular backsupport- ideal for displaying literature orfolded itemsKits- available in kits of 4 x letterportrait shelves or 2 x letterlandscape shelves, complete with39 1 ⁄3” (1m) of 6mm diameter rodand wall fixingsPortraitItem Code: Size:HLTRS LetterLandscapeItem Code: Size:HLTRLS LetterKit - 4 x letter portrait shelvesItem Code: Size:KHLTRS 4 x LetterKit - 2 x Letter landscape shelvesItem Code: Size:KHTLTRLS 2 x LetterKHLTRSKHLTRLSFixing systemsWM11(p29)Hook-on wall mounted pockets/leaflet dispensers:- fix to the wall with WM11 which will give a good solid fixing to any type ofwall. Use R1000P for single runs and R1500 for continuous runs- projects center of rod 11/16” (24mm) away from the wall. Use HAS toensure display hangs vertical- fix WM11 support every 19” on horizontal rodP02 + RS03(p29)Wall mounted supports for hook-on shelves:- use P02 + RS03 when fixing hook-on shelves. This support fits closely to thewall and allows the accessory to seat securely- projects center of rod 3/8” (10mm) away from the wall43

Leaflet dispensers for use on cable/rod systemsLetter size dispensers- leaflet dispensers to take letter size portrait leaflets- 1/8” thick acrylic. 2 x letter versions have 3/16” acrylic backs- depth of pocket 1½”13”Single sidedItem 1.5mm & 3mm 6mm 10mmCode: Size: Cable/Rod centers: Rod centers: Rod centers:LDLTR Letter 9 7/8” 10 1/8” 10 1/4”LD2LTR 2 x Letter 17 3/8” 17 5/8” 17 3/4”LD2LTR2 2 x Letter 23 3/8” 23 5/8” 23 3/4”Double sidedItem 1.5mm & 3mm 6mm 10mmCode: Size: Cable/Rod centers: Rod centers: Rod centers:LDDLTR Single Letter 9 7/8” 10 1/8” 10 1/4”LDD2LTR 2 x Letter 17 3/8” 17 5/8” 17 3/4”LDD2LTR2 2 x Letter 23 3/8” 23 5/8” 23 3/4”Single Letter2 x letteroverall widthabove to fit16” x 20” EAP2 x letteroverall widthabove to fit22” x 28” EAPTrifold dispensers- leaflet dispensers to take (1/3rd letter) portrait leaflets- 3/16” acrylic back panel, 1/8” acrylic front section- depth of pocket 1 1/2”- custom sizes available9“4 x tri-foldoverall width foruse below 16 x 20”Single sidedItem 1.5mm & 3mm 6mm 10mmCode: Size: Cable/Rod centers: Rod centers: Rod centers:LDTR14 4 x tri-fold 17 3/8” 17 5/8” 17 3/4”LDTR15 5 x tri-fold 23 3/8” 23 5/8” 23 3/4”Double sidedItem 1.5mm & 3mm 6mm 10mmCode: Size: Cable/Rod centers: Rod centers: Rod centers:LDDTR14 4 x tri-fold 17 3/8” 17 5/8” 17 3/4”LDDTR15 5 x tri-fold 23 3/8” 23 5/8” 23 3/4”5 x tri-foldoverall widthfor use below22” x 28” graphicAngled leaflet dispensers- 1/8” thick acrylic leafletdispensers designed to take avariety of sizes- with 1 1/2” lip and triangularback support- special sizes available onrequest11”5 1/2”Item 1.5mm & 3mm 6mm 10mmCode: Size: Cable/Rod centers: Rod centers: Rod centers:ALDLTR Letter 9 7/8” 10 1/8” 10 1/4”ALDLTRL landscape Letter 12 3/8” 12 5/8” 12 3/4”*see page 8 for metric conversion44

Acrylic accessoriesSloping shelvesFor use on cable/rod systemsSSLTR- acrylic shelf with lip at front edge- designed to be supported by fourcables or rods- ideal for letter size leaflets/bookletsand product presentations- shelf height 9” with front lipof 1 1/2”- choose from clear or green edgeacrylic- shelves are 1/4” thickItem Code: Size: Finish:SSLTR Letter ClearSSLTR-GE Letter Green edgeSSLTRL Letter landscape ClearSSLTRL-GE Letter landscape Green edgeSSLTRLShelves have been designed tobe used with 6” spacingbetween front and backcable/rods. Use with multipositionsupports - see pages 16,21, 27, 30, 34.Freestanding/wall mounted leaflet dispensers- injection moulded plastic- units can be linked togetherItem Code: Size: Dimensions :TK-4CI Trifold 4 3/8”w x 7 3/4”h x 3 1/4”dTK 8.5CI Letter 9 1/4”w x 10 3/4”h x 3 3/4”dTK-6CI up to 6 3/8”w 6 3/4”w x 7 3/4”h x 3 3/4”dTK-4CITK-6CITK-8.5CIFreestanding menu/leaflet holdersMA8511 MA4060 MB8511 MB4060- single sidedItem Code: Size: Dimensions (mm):MA8511 Letter 8.5” x 11”MA4060 4” x 6” 4” x 6”- Double sidedItem Code: Size: Dimensions (mm):MB8511 Letter 8.5” x 11”MB4060 4” x 6” 4” x 6”45

Framed posters & A boardsClick/Snap frames - 1” (25mm)- quick and easy to open posterframe- anti-glare PVC poster cover- silver anodised finish- no tools required to changeposter- custom sizes availableItemPosterCode:dimensions:CFLTR 8½ x 11 (216mm x 279mm)CF1620 16 x 20 (406mm x 508mm)CF2228 22 x 28 (559mm x 711mm)CF2436 24 x 36 (610mm x 914mm)Security click/Snap frames - 1” (25mm)- security frame will protect yourposter- frame is virtually impossible toopen without lever tool- custom sizes availableItemPosterCode:dimensions:FFRPLTR 8½ x 11 (216mm x 279mm)FFRF2228 22 x 28 (559mm x 711mm)CFSA4 8 1 /4 x 11 11 /16” (210mm x 297mm)CFSA3 11 11 /16 x 16½” (297mm x 420mm)CFSA2 16½” x 23 3 /8” (420mm x 594mm)CFSA1 23 3 /8” x 33 1 /8” (594mm x 841mm)Remember to order lever tool:Item CodeCFS-LT25Flex-A-Board- extremely stable - stays in placeeven under heavy winds- takes standard posters - quickand easy to change- light weight, easy to carry,relocate, fold away and store- snaps shut flat with magneticcatchItem Size: PosterCode:dimensions:MA2 A2 16½” x 23 3 /8” (420mm x 594mm)MA1 A1 23 3 /8” x 33 1 /8” (594mm x 841mm)Flex-A-Board accessories- protect your unit with an easyto use canvas slip-over cover- protects your unit while beingstored or transportedItem Code:CPA2CPA1Size:A2A1Standard ‘A’ Boards- fold away poster display- quick and eaasy to change poster- anti-glare poster coverItem Code:AA2AA1ST-ALU137Poster dimensions:16½” x 23 3 /8” (420mm x 594mm)23 3 /8” x 33 1 /8” (594mm x 841mm)22x28” (559mm x 711mm)46

Banner & hanging railsGotcha stripsAluminium banner rail with clear plastic gripper strip. Fitted with PO2supports ready to be used on 1.5mm and 3mm cable and on 3mm,6mm and 10mm rods.- quick and easy way to suspend large posters. The clear plastic stripssimply clip the poster into position, holding it firmly in place.- suspend banners from the top only or use floor to ceiling cables orrods to hold banners top and bottom - ensures perfect tension at alltimes.- remember to order supports - see belowItem Code: Size:A-60 60” (1524mm)A-48 48” (1219mm)A-40 40” (1016mm)A-36 36” (914mm)A-24 24” (610mm)A-12 12” (305mm)SingleSupportsRemember to add supports forGotcha strips. Available as singleor double sided- supports listed are in satinchrome finishItem Code:SingleCS03CS03-3RS03RS03-10Cable/rod:1.5mm cable3mm cable/rod6mm rod10mm rodItem Code:DoubleCS04RS04RS04-10Cable/rod:1.5mm cable6mm rod10mm rodDoubleBanner rails¾” (19mm) diameter banner rails- supplied with supports CS03/RS03 to fit directly onto1.5mm cables/6mm rods. No additional fittings required- Shorter lengths cut to size - call for price (specify cable centersrequired)Item Code: Length: Cable/rod centers:BR19C-3/PC 3’ (914mm) 37 1 ⁄8” (944mm) cable centersBR19C-4/PC 4’ (1219mm) 49¼” (1250mm) cable centersBR19R-3/PC 3’ (914mm) 37 1 ⁄8” (944mm) rod centersBR19R-4/PC 4’ (1219mm) 49¼” (1250mm) rod centers- ask about banner rails for 3mm cable, 3mm and 10mm rodHanging rails1” (25mm) diameter hanging/banner rails- ideal for light weightmerchandise- polished chrome rails, suppliedwith supports to fit directly onto1.5mm cables/6mm rods, noadditional fittings required- shorter lengths cut to size - call for price(specify cable centers required)Item Code: Length: Cable centre:HR25C-3/PC 3’ (914mm) 37 1 ⁄8” (944mm) cable centersHR25R-3/PC 3’ (914mm) 37 1 ⁄8” (944mm) rod centers47

ProductdisplayEnsure yourproducts aredisplayed in thebest possibleway and they willsell themselves!Choose from awide range ofdynamic shelvingand displayoptions tomaximize yoursales.Acrylic cubes and boxes,with or without lids - adynamic way to displayproducts.Flat shelves,sloping shelves,narrow shelvesunder posters,framed displays.Any way youwant to displayyour products,we can help.48

- ShapedShapedShelvingfor use with cable/rod systemsPlain shelves - use with cable or rod systems- ¼” (6mm) tempered safety glass- for shelf supports see p22, 25, 32 and 36- cut to size- varying thickness availableSpecial shapes & sizes available on requestAvailable in glass and acrylicFlat shelf with lip For use on wall-mounted rodsUse as a group to make a feature or use under a16x20” pocket to create a powerful wall displaywith graphics and product.- 1/8” thick acrylic- shelf is 16” (406mm) wide x 4¾” (121mm) deepwith a 1/2” (12mm) lip and a 4” (100mm) dropback- fixing details see p4349

Acrylic display cubesStandard cube kitsAcrylic cubes suspended from the cables create powerful semi-securepresentations. The low-voltage lighting greatly increases the impact ofthe display and will help to increase sales.Dimensions: 11 4/5” h x 11 4/5” w x 9 7/8” d (5 9/10” cable centers)Cubes are in 1/8” thick acrylic, with option of a ‘U’ shaped back pocketfor graphics. Clear front and satin side and top. Removable lid withhole for lighting.Included in standard cube kits3 x Display Cubes4 x CA4 1.5mm dia. Cables24 x CS13/ACD Panel Support to take 1/8” material3 x LM64C Straight light mini-lamp head for 13 7 ⁄10” (348mm)diagonal centers supplied with 20 watt - 1 3 ⁄8” (35mm) dia. lamps1 x S90010 Transformer2 x CS08 Power Connectors4 x PC01/1 Top Isolators4 x SP/IS Bottom IsolatorsItem Code:KC33/SKC33-P/SDescription:Satin acrylic without pocketSatin acrylic with pocketKC33/SLow voltage straight lights (20watt max) are supplied with allour cube kits. Position themdiagonally between cablesCubes can be placed side by sidesharing a pair of cables. Only use3 lights per pair of diagonalcablesCubes can be suspended on cables or rods. Ask about customized cube displays, including security features,integrated graphics and lighting50

Low voltageDisplaylightingAdding low voltage lighting toyour cable or rod displays willincrease visual impact andincrease your sales by up to 107%• Quick and easy to install• Light fittings are easy to specify - just followour step-by-step guide on the next page• All you need to complete the installation is anelectrical spur, positioned within 78¾” (2m) ofthe transformer• No need to use special cables - our lightinguses our standard cables or rods, retainingstrength and load bearing capacityaddvisualimpactincreasesaleshighqualityeasy toinstall51

HOW MANY LIGHTSCAN I PUT ON ONEPAIR OF CABLES * ?The answer to this lies inthe type of light you haveselectedSingle lights are poweredon a 12V system andrequire a 60Wtransformer(order code S90010)This means on one pair ofcables fitted with a 60Wtransformer you can have:1 x 50W lightorUp to 3 x 20W lightsDouble lights arepowered on a 24V systemand require a 100Wtransformer(order code T-1-81048)This means on one pair ofcables fitted with a 100Wtransformer you can have:2 x 50W lightsorUp to 4 x 20W lightsChoosing your lighting...This guide will help you choose the right lights foryour displays and ensure you select all the rightcomponent parts, giving you easy, problem-freeinstallation.When you know what your display is going tolook like and consist of (display panels, shelves,leaflet holders), you can choose lights tomaximize their impact. Just follow this easystep-by-step guide:1234Check the panel on the left tosee how many lights you canput on one pair of cablesNext choose the style of lightsyou’d like (see pages 48 to 51).Remember to add the correcttransformer, power connectorsand isolators to your order (seepage 52)Choose which lamps you want -standard dichroic lamps (20 or 50watt) are included in the price ofthe fitting. See page 52 for extralong life, extra bright or coloredlampsThat’s it! Place your order andlook forward to boosting yoursales with exciting displays!How the lighting works:1 transformer requiredabove each pair of cables/rods. Fix transformer toceiling or wall.Cable or rodfixed to mainceiling.6’6” (2m) of mainscable from powersupply to transformer.Electrical spursupplies mainspower to thetransformer.3’ (914mm) ofcable fromtransformer topower connectors.Suspended/falseceiling. Powerconnection canbe made abovethe false ceiling.Cablesref: CS08Rodsref: RS08*Remember, only onetransformer per pairof cables.For light configurations otherthan those above, please call.Alternatively,transformers canbe discretelysurface mountedon the ceiling,floor or wallLight fittings can be positioned anywherealong the length of the cable/rod. Unitscan be moved easily using an allen key.Power connectors- Connectionsattach simplyJonto thecable/rod. Perfectcontact is ensuredby two grubscrews.52

Cantilevered lights• ideal for lighting graphic panels or posters• lights have 180° adjustable heads and project 150mm from cable/rods• available in either single (50W) or double (2 x 50W) options• use single lights for graphics up to 25” (635mm) wide• double lights are available as special orders up to 39” (991mm) wide - just ask for details and pricesSingle cantilevered lights - 1 x 50W lamp included- requires transformerS90010 or T-1-81048- 12 volt- to fit up to 25” (635mm)cable/rod centersTo fit letter EAPCode: Cable/rod size:LLTRSC/SI To fit 1.5mm cableLLTRSC-3/SI To fit 3mm cable/rodLLTRSR/SI To fit 6mm rodTo fit 16” x 20” EAPCode: Cable/rod size:L1620SC/SI To fit 1.5mm cableL1620SC-3/SI To fit 3mm cable/rodL1620SR/SI To fit 6mm rodTo fit 22” x 28” EAPCode: Cable/rod size:L2228SC/SI To fit 1.5mm cableL2228SC-3/SI To fit 3mm cable/rodL2228SR/SI To fit 6mm rodNEW budget singlecantilevered light1 x 50W- requires transformer T-1-81048or S90010- 12 volt- to fit letter size. Other sizesavailable on requestTo fit letter size EAPCode: Cable/rod size:LWLTRSC To fit 1.5mm cableLWLTRSC-3 To fit 3mm cable/rodTo fit cable/rod centers up to25” (635mm)Code: Cable/rod size:LM6SC/SI To fit 1.5mm cableLM6SC-3/SI To fit 3mm cable/rodLM6SR/SI To fit 6mm rod- specify size requiredTo fit double letter EAPCode: Cable/rod size:LW2LTRSC To fit 1.5mm cableLW2LTRSC-3 To fit 3mm cable/rod- for double letter pocket EAPDBLLTR (p37)Double cantilevered lights - 2 x 50W lamps included- requires transformer T-1-81048- 24 volt- to fit up to 25” (625mm)cable/rod centersTo fit 22” x 28” EAPCode: Cable/rod size:LD2228SC/SI To fit 1.5mm cableLD2228SR/SI To fit 6mm rodTo fit 24” x 36” EAPCode: Cable/rod size:LD2436SC/SI To fit 1.5mm cableLD2436SR/SI To fit 6mm rodTo fit cable/rod centers up to25” (635mm)Code: Cable/rod size:LDM6SC/SI To fit 1.5mm cableLDM6SR/SI To fit 6mm rod- specify size required53

Customised cantilevered lightsDouble sided cantilevered lights - lamps includedSingleSingle double sidedcantilevered lights -2 x 20W- requires transformer T-1-81048 orS90010- 12 volt- to fit any size from letter up to25” (635mm)cable/rod centers- please specify size when ordering1 x 20W single light on each sideCode: Cable/rod size:L2M6SC/SI To fit 1.5mm cableL2M6SR/SI To fit 6mm rodDoubleTwin double sidedcantilevered lights -4 x 20W- requires transformer T-1-81048- 24 volt- to fit any size from 16” (406mm)up to 33” (838mm) cable/rodcenters- please specify size when ordering2 x 20W single lights on each sideCode: Cable/rod size:L2DM8SC/SI To fit 1.5mm cableL2DM8SR/SI To fit 6mm rodExtra wide cantilevered lights - lamps included- light projects 7 7/8” (200mm)- to be used on panels up to 1/4”(7mm) thick- to fit up to 39” (991mm)cable/rod centers- please specify size when orderingSingle - 1 x 50W- requires transformer T-1-81048or S90010- 12 voltTo fit cable/rod centers up to39” (991mm)Code: Cable/rod size:LM6PC/SI To fit 1.5mm cableLM6PR/SI To fit 6mm rodDouble - 2 x 50W- requires transformer T-1-81048- 24 voltDoubleTo fit cable/rod centers up to39”(991mm)Code: Cable/rod size:LDM8PC/SI To fit 1.5mm cableLDM8PR/SI To fit 6mm rod54

Straight lights• ideal for lighting shelving presentations• straight fitting - lamp is positioned in the middle or offset with 180° adjustment• available in either single (1 x 20W) or double (2 x 50W) optionsSingle straight lights - 1 x 20W lamp includedSingle straight light- fits side cable/rod with cable/rodcenters of 300mm (11 4/5”)- requires transformer T-1-81048or S90010- 12 voltTo fit 11 4 ⁄5” (300mm) cable/rodcentersCode: Cable/rod size:LM3C/SI To fit 1.5mm cableLM3R/SI To fit 6mm rodDouble straight lights - 2 x 50W lamps included- Set of 2 lights for use on thefront of shelving- requires transformer T-1-81048- 24 voltTo fit 22”x 28” pocketsCode: Cable/rod size:LD2228C/SI To fit 1.5mm cableLD2228R/SI To fit 6mm rodTo fit 24” x 36” pocketsCode: Cable/rod size:LD2436C/SI To fit 1.5mm cableLD2436R/SI To fit 6mm rodTo fit cable/ rod centers up to25” (635mm)Code: Cable/rod size:LDM6C/SI To fit 1.5mm cableLDM6R/SI To fit 6mm rod- specify size requiredSingle straight lights with swivel feature - 1 x 20W lamp includedSingle straight lightwith swivel- fits side cable with cable centersof 11 4 ⁄5” (300mm)- requires transformer T-1-81048or S90010- 12 voltTo fit 11 4 ⁄5” (300mm) cablecentersCode: Cable size:LM3OCS/SI To fit 1.5mm cable55

Wirelights• Wirelights are an elegant yet cost-effective way to illuminate any display supported on cables or rods• lamps are angled down to give a good overall spread of light• available in either single (1 x 50W) or double (2 x 50W) options• cool-to-the-touch black silicone rings are also included for extra eleganceSingle Wirelights - 1 x 50W lamp includedSingle WirelightSingle Wirelight - 50W- lamps project 5 7 ⁄8” (150mm)from cables- requires transformer T-1-81048or S90010- 12 voltTo fit letter EAPCode: Cable/rod size:LWLTRC To fit 1.5mm cableLWLTRC-3 To fit 3mm cable/rodLW3LTRR To fit 6mm rodTo fit 16” x 20” EAPCode: Cable/rod size:LW1620C To fit 1.5mm cableLW1620C-3 To fit 3mm cable/rodLW1620R To fit 6mm rodTo fit 22” x 28” EAPCode: Cable/rod size:LW2228C To fit 1.5mm cableLW2228C-3 To fit 3mm cable/rodLW2228R To fit 6mm rodTo fit 24” x 36” EAPCode: Cable/rod size:LW2436C To fit 1.5mm cableLW2436C-3 To fit 3mm cable/rodLW2436R To fit 6mm rodNEW budget singlecantilevered light1 x 50W- requires transformer T-1-81048or S90010- 12 volt- to fit letter size. Other sizesavailable on requestTo fit letter size EAPCode: Cable/rod size:LWLTRSC To fit 1.5mm cableLWLTRSC-3 To fit 3mm cable/rodDouble letter EAPCode: Cable/rod size:LW2LTRSC To fit 1.5mm cableLW2LTRSC-3 To fit 3mm cable/rod- for double letter pocket EAPDBLLTR (p37)Double sided Wirelights - 2 x 50W lamps includedDouble WirelightDouble-sidedWirelight - 2 x 50W- lamps project 5 7 ⁄8” (150mm)from cables- requires transformer T-1-81048- 24 voltTo fit letter EAPCode: Cable/rod size:LDWA4C To fit 1.5mm cableLDWA4R To fit 6mm rodTo fit 16” x 20” EAPCode: Cable/rod size:LDWA3C To fit 1.5mm cableLDWA3R To fit 6mm rodTo fit 22” x 28” EAPCode: Cable/rod size:LDWA2C To fit 1.5mm cableLDWA2R To fit 6mm rodTo fit 24” x 36” EAPCode: Cable/rod size:LDWA1C To fit 1.5mm cableLDWA1R To fit 6mm rod56

Hightrack kitsHightrack is a low-voltage system using an ultra-slim trackprofile and miniature spotlights. It provides ultimateflexibility and freedom in lighting design.- distinctive low-voltage fittings make this system ideal for retail, display,exhibitions, galleries, offices and leisure applications- quick and easy way to order track lighting- select the length of track required and the number of spots and you willbe supplied with everything you need, including lamps and transformer- shown here are some of our most popular kits. For more, please ask fordetailsSP Head withSteel coverCeiling/wallmounting kitHT-J06/SIKHT6SP HeadH2 HeadCode: Description Lamp fittingsCeiling/wall mounted track kitsKHT1 39 3 /8” (1m) track with 3 x 35 watt IRC lamps, inline transformer (105va) SP Headswith 6’6” (2m) mains cable and 3-pin plug (for wall mounting order HT-J01/SI)KHT2 As above H2 HeadsKHT6 59” (1.5m) track with 4 x 35 watt IRC lamps, inline transformer (150 va) SP Headswith 6”6” (2m) mains cable and 3-pin plug (for wall mounting order HT-J01/SI)KHT7 As above SP Heads with Steel CoverKHT8 As above H2 HeadsKHT9 As above H2 Heads with 7 7 /8” (200mm) pendantH2 Headwith200mmpendantKHT15 59” (1.5m) track with 4 x 50 watt lamps, remote hard wired transformer SP Heads(200 va) with 6’6” (2m) low voltage cable(for wall mounting order HT-J01/SI)KHT16 As above SP Heads with Steel CoverKHT17 As above H2 HeadKHT18 As above H2 Heads with 7 7 /8” (200mm) pendantKHT25 78¾” (2m) track with 6 x 50 watt lamps, remote hard wired transformer SP Heads(300 va) with 6’6” (2m) mains cable (for wall mounting order HT-J01/SI)KHT26 As above H2 HeadsKHT27 As above H2 Heads with 7 7 /8” (200mm) pendantMounting KitsCablesuspensionkitHT-J05/SIHT-J06/SIHT-J05/SICeiling/wall mounting kit - silver (fix every 19 5 /8” – 500mm)Cable suspension kit57

HighlightTransform the appearance of your display units, exhibition stand orwindow display with a touch of sparkle - people are drawn by brightlight, thus increasing the impact of presentations and sales messages- minature low-volage fittings which will takeup to 50 watt lamps (not included)- transformers L-TB60 or L-TB100Mono lightsTransformers- miniature low-voltage spotlightMono lightCode:H2/A/SITransformerCode:L-TB60L-TB100L-TB200Mono pendant lightsPendant- miniature low-voltage spotlights with a choice of pendant length- pendant created from 6mm tube- angle adaptor option allows lamp head to swivel an additional 90° inorder to shine onto the ceiling or wall- flexible stem option allows lamp to be adjusted to any positionPendant withangle adaptorPendantsCode: Tube length:H2/E2/SI 7 7 /8” (200mm)H2/E3/SI 11 7 /8” (300mm)H2/E5/SI 19¾” (500mm)Pendant with angle adaptorCode: Tube length:H2/E2A/SI 7 7 /8” (200mm)H2/E3A/SI 11 7 /8” (300mm)Flexible stemCode: Tube length:H2/F2/SI 7 7 /8” (200mm)H2/F3/SI 11 7 /8” (300mm)H2/F5/SI 19¾” (500mm)FlexiblestemDuo lights4” (100mm)lampcenters4” (100mm)lampcenterswithswivel- ideal for concentrated light- excellent feature light forenhancing both products andgraphic displays- choice of pendant lengthDuo straightCode: Tube length:4” (100mm) lamp centers:H2/E2D1/SI 7 7 /8” (200mm)H2/E5D1/SI 19¾” (500mm)16¾” (425mm) lamp centers:H2/E2D4/SI 7 7 /8” (200mm)H2/E5D4/SI 19¾” (500mm)Duo with swivelCode: Tube length:4” (100mm) lamp centers:H2/E2D1S/SI 7 7 /8” (200mm)H2/E5D1S/SI 19¾” (500mm)16¾” (425mm) lamp centers:H2/E2D4S/SI 7 7 /8” (200mm)H2/E5D4S/SI 19¾” (500mm)16¾” (425mm)lampcenters16¾” (425mm)lampcenterßswith swivel58

Lighting accessoriesTransformers - see page 49 for number of lights per transformerS9001012v transformerT-1-8104812/24v transformerLamps - 2” (50mm) diameterStandard dichroiclamps- top quality, glass fronted lampwith an average lamp life of5,000 hoursExtra long life lamps- average lamp life 10,000 hours- more than a years life based on24 hours a day usage- saves time and money, reducesthe hassle of changing lampsIRC lamps - 70%brighter- average lamp life 4,000 hours- brightness equivalent to a 65Wdichroic lampS90010Code:S90010T-1-81048Code:T-1-8104820W lampCode: Beam angleLD20/W 36°50W lampCode: Beam angleLD50/24 24°50W lampCode: Beam angleLD50-UL/24 24°50W lampCode: Beam angleLD50-IR/24 24°- supplied with 4’ output lead- includes protection againstoverheating, overloading andshort-circuits- remember to order powerconnectors (see below)SilverSilicone ringsSilver lampsAdd a touch of style - change theappearance of your lamp fittings- the external casing of the lampis silver.- light projects forward only- average lamp life 3,500 hoursAdd a touch of style - gives thefinishing touch to any 2” (50mm)diameter lamp. The black siliconering just clips onto the rim of thelamp.20W lampCode: Color: Beam angleLD20/S Silver 36°50W lampCode: Color: Beam angleLD50/S Silver 36°Silicone ringCode:LHR/BLPower connectors and isolatorsPower connectors- allows electrical power to beconnected to the cable or rod- perfect contact is ensured bytwo grub screws- Satin chrome finishPower connectorCode:CS08 For 1.5mm cableCS08-3 For 3mm cable or rodRS08 For 6mm rodAdd isolators when using channelor installing into metal ceilings orfloorsTop isolator- Black nylon forcables, white nylonfor rodsBottom isolator- in 3 nylon sectionsIn-line rod isolator- insert when metalacccessories touch bothrods to avoid fusingTop isolatorCode:PC01/I For cablesPR01/I For rodsTopIsolatorBottom isolatorCode:SP/IS For cables & rodsBottomIsolatorInline isolatorCode:LIJ For 6mm rods59

Ask about the extensive rangeof freestanding displaysProviding instant 3D walkroundaccess, freestandingdisplays make standing out inthe crowd so easy.FreestandingdisplaysMake the most of your floor space by promotingyour image, products and services to best effectusing our range of freestanding display units.Make animpactwith yourinformation.Use pocketsand framesfor maximumstyle...andmaximumsales.60

Freestanding unitsFreestyle frame - round profile uprightSatin silver aluminum units with 1 7 ⁄8” (47.8mm) diameter uprightsand flat horizontal profiles- combine posters, leaflet dispensers, sloping shelves - create a displaythat gets your message across!- all units 78” (1981mm) high- steel bases are 13½” (343mm) diameter- supplied flat packed.Item Code: External width: Internal width:FSU36x78 36” (914mm) 32¼” (819mm)FSU50x78 50” (1270mm) 46¼” (1175mm)FSU68x78 68” (1727mm) 64¼” (1632mm)1 7 ⁄8” (47.8mm)Available in 3 widths36”, 50” and 68”1 7 ⁄8” (47.8mm)”Round uprights - single frameFreestyle frame - kitFreestyle frame kit- comprises FSU36x78 Freestyleframe, 8 x letter size portrait acrylicpockets, 4 x quick fit cables and 32x CG03 panel clampsItem Code:KFR-3678-8LTRDescription:8 x letter size KitFlexi-frames - double and trebleLightweight satin silveraluminum units ideal for use onexhibition stands, conferences,reception areas or in-store- Double and treble frames withflexible hinges- flat profile measures 1 13 ⁄16” x ¾”deep (46mm x 20mm)- all units 78” (1981mm) high- supplied flat packed.- special sizes on requestItem Code: Description: External width mm: Internal width mm:FF3x6.5DBL Double 2 x 36” (914mm) width frames 32 3/8” (822mm)FF3x6.5TRPL Treble 3 x 36” (914mm) width frames 32 3/8” (822mm)Flexible hinge allows unit to foldflat for easy storage andtransporting61

Frame accessoriesFrame accessoriesDoubled sided bracketBracketsDouble sided bracket - supports cables/rods (not included)- two sizes available:5 7 ⁄8” (150mm) cable/rod centers, ideal for small shelves, sloping shelvesand acrylic cubes11 13 ⁄16” (300mm) cable/rod centers, ideal for shelving and doubledepth displaysSingle sided bracket - supports cables/rods in front of frame- projects 2”- can also be used to support cables away from the wall on exhibitionstands (fits wall depth 3/4” or 20mm). Order cables/rods separatelyItem Code: Description:Cable/rod centers:KMFB1/SI Single sided bracket -KMFB3/SI Double sided bracket 11 13 ⁄16” (300mm)KMFB15/SI Double sided bracket 5 7 ⁄8” (150mm)Brackets fit a profile upto 3/4” (20mm) deepUse brackets to support a widerange of accessories - shelves,panels, leaflet dispensers...11 4/5”/ 5 9/10”centers3/4” 2”Double sided bracketSingle sided bracketSee Product and Graphic Display sections (p36-45) for accessories to use with framesQuick fit cable- cable designed to be used withfreestanding frames top andbottom- includes 13’1” (4m) of cable, 2quick fit toggles & springtensionerNot to be used with lightingToggle- for fixing standard cable or rodto freestanding frames- can be used with all top andbottom cable/rod fittings- allen key providedItem Code:CQQFinish:Satin ChromeItem Code:ATFinish:SilverFitting to fix channelto wall- for fixing channel to wall- available in spacers size 1/2”(12.5mm), 1” (25mm) and 2”(50mm) from wallKWC-1WallChannelRight anglechannel forwall fixingItem Code: Space from wall:KWC-1 1/2” (12.5mm)KWC-3 1” (25mm)KWC-2 2” (50mm)with adjustable screw threadfor uneven walls with flangeKWC-4 2” (50mm)with adjustable screw threadfor uneven wallsKWC-3KWC-2 and KWC-4with adjustable screw thread foruneven wallsKWC-2 with flangeKWC-4 without flange62

post - Side mount- Hook-onpost - Side mountFreestanding unitsInfo-postCreate an instant presentation to display signs, posters and leaflets.Perfect for use in:- reception areas for company information or as a directory sign- shop windows- near a sales counter or customer service desk- on exhibition standsInfo-post kitsKits are supplied complete with:- 78” (1981mm) satin aluminum upright- 13½” (243mm)diameter base unit- set of 6 letter size portrait acrylic pockets, eitherhook-on pockets with rods or side supported easyaccess pockets- all fittings supplied- kits are supplied flat packed and can be assembledin minutesItem Code: Description:KIPA-6LTR Kit with side supported pocketsKIPA-HR6LTR Kit with hook-on pocketsKIPA-6LTRInfo-post with sidesupported pocketsKIPA-HR6LTRInfo-post with hookonpocketsUpright and base only- 78” (1981mm) satin aluminum upright with13½” (343mm) diameter silver painted baseItem Code: Description:IP78 Upright and baseSupportsChoose from:- satin chrome clamp to take panels up to3/8” (10mm) thickor- horizontal stainless steel rods, supplied with quick fittoggle that allows easy relocation. Comes with RECdecorative end fitting in satin chrome. Available in 2sizes to take letter size portrait or landscape pocketsItem Code: Description:KPC Clamp for panels up to 3/8”KRLTRP Rod to take letter size portraitKRLTRL Rod to take letter size landscapePockets- 1/8” (3.2mm) thick high impact acrylic for increased durability inpublic areas- supplied with wing on the left or right hand side- use with KPC support clampsItem Code: Description/size: Left or Right FixingEAP8.5x11IP/RH Letter Portrait rightEAP8.5x11IP/LH Letter Portrait leftEAP11x8.5IP/RH Letter Landscape rightEAP11x8.5IP/LH Letter Landscape left- Hook-onKIPA-HR6LTRInfo-post kitsupplied with 6letter sizehook-on pocketsKIPA-6LTRInfo-post kitsupplied with6 letter sizeside supportedpocketsInfo-Post withletter size leafletdispenserInfo-Post withdouble lettersize pockets63

The eye isdrawn tolight...An illuminated posteror graphic canincrease sales by upto an incredible107% over a nonilluminatedpresentation.Light boxesUsing the latest technologycoupled with an incredibly longlamp life, our wall mounted orsuspended light boxes give youmaximum impact in yourpremises.64

Light boxes - single & double sidedCold cathode light boxes- cold cathode light boxes use thevery latest light technology,making them incredibly brightand light weight.- extremely long lamp life - up to50,000 hours (approx. 5 years)- lux level at panel center of 24” x 36” wunit is 1092 lux, making it one of thebrightest around- supplied with a 3-pin plug- stylish, slim click frame, 1 1/5”wide x 1 1/3” deep- available in custom sizes- use wall mounted or suspendedon cable/rod systemSingle sided light boxes- silver anodised finishItem Code: Size: Frame size Viewing area Max graphic areaLB1620 16” x 20” (406 x 508mm) 17 1/5” x 21 1/5” 16” x 20” 16 1/5” x 20 1/5”LB2228 22” x 28” (559 x 711mm) 23 1/5” x 29 1/5” 22” x 28” 22 1/5” x 28 1/5”LB2436 24” x 36” (610 x 914mm) 25 1/5” x 36 1/5” 24” x 36” 24 1/5” x 36 1/5”LB3648 36” x 48” (914 x 1219mm) 37 5/8” x 48 5/8” 36” x 48” 36 1/5” x 48 1/5”-All sizes given in inches and width x height-All sizes are approximate-1” = 25.4mmDouble sided light boxes- double sided units can be suspended from cable/rod systems - ask for details- brushed aluminum finishItem Code: Size: Frame size Viewing area Max graphic areaLDB2228 22” x 28” (559 x 711mm) 23 1/5” x 29 1/5” 22” x 28” 22 1/5” x 28 1/5”LDB2436 24” x 36” (610 x 916mm) 25 1/5” x 36 1/5” 24” x 36” 24 1/5” x 36 1/5”-All sizes given in inches and width x height-All sizes are approximate-1” = 25.4mm65

Light boxes - single & double sidedLED light boxes –framed- Power consumption savings over traditional fluorescent or incandescent bulbs approaching 80%+- Long lasting—over 80,000 hours or 8+ years of continuous use- Snap frames feature easy access to change graphics- Ultra slim and light- Brightness and efficiency of light distribution above industry standards- Mains powered—power supply includedPremier Series: Flat frame: 1¾” (33mm)Single sided: 15/16” (23.8mm) thickItem Code: Size: Frame Size:ELP1620 16" x 20" (406 x 508mm) 17 7 ⁄8" x 21 7 ⁄8" (454 x 556mm)ELP2228 22" x 28" (559 x 711mm) 23 7 ⁄8" x 29 7 ⁄8" (606 x 759mm)ELP2436 24" x 36" (610 x 914mm) 25 7 ⁄8" x 37 7 ⁄8" (651 x 962mm)Double sided: 1⅛” (29mm) thickItem Code: Size: Frame Size:ELP1620D 16" x 20" (406 x 508mm) 17 7 ⁄8" x 21 7 ⁄8" (454 x 556mm)ELP2228D 22" x 28" (559 x 711mm) 23 7 ⁄8" x 29 7 ⁄8" (606 x 759mm)ELP2436D 24" x 36" (610 x 914mm) 25 7 ⁄8" x 37 7 ⁄8" (651 x 962mm)Profile Series: Flat frame: 1¼” (32mm)Single sided: 7/16” (10mm) thickItem Code: Size: Frame Size:PS912 9" x 12" (229 x 305mm) 10½" x 13½" (267 x 343mm)PS1620 16" x 20" (406 x 508mm) 17½" x 21½" (445 x 521mm)PS2228 22" x 28" (559 x 711mm) 23½" x 29½" (597 x 749mm)PS2436 24" x 36" (610 x 914mm) 25½" x 37½" (648 x 953mm)Standard Series: Flat frame: 15/16” (23.8mm) or 3-Plane 3/4” (20mm)Single sided: Flat frame 15/16” (23.8mm) or 3-Plane 5/8” (16mm) thickItem Code: Size: Frame Size:C8511 8½" x 11" (216 x 279mm) 9 3 ⁄8" x 11 7 ⁄8" (238 x 301mm)C1824 18" x 24" (257 x 610mm) 18 7 ⁄8" x 24 7 ⁄8" (278 x 632mm)C2228 22" x 28" (559 x 711mm) 22 7 ⁄8" x 28 7 ⁄8" (581 x 733mm)C2436 24" x 36" (610 x 914mm) 24 7 ⁄8" x 36 7 ⁄8" (632 x 937mm)Large Format Series: Flat frame: 15/16” (23.8mm)Single sided: 15/16” (23.8mm) thickItem Code: Size: Frame Size:LF34 36" x 48" (914 x 1220mm) 37 1 ⁄16" x 49 1 ⁄8" (943 x 1248mm)LF35 36" x 60" (914 x 1525mm) 37 1 ⁄16" x 61 1 ⁄8" (943 x 1553mm)LF36 36" x 72" (914 x 1835mm) 37 1 ⁄16" x 73 3 ⁄8" (943 x 1863mm)LF38 36" x 96" (914 x 2440mm) 37 1 ⁄16" x 97 1 ⁄8" (943 x 2468mm)LF46 48" x 72" (1220 x 1835mm) 49 1 ⁄8" x 73 3 ⁄8" (1248 x 1863mm)LF48 48" x 96" (1220 x 2440mm) 49 1 ⁄8" x 97 1 ⁄8" (1248 x 2468mm)Snap FrameStylesFlat and 3-planeLED light boxes –frameless- Power consumption savings- Long lasting—over 80,000 hours or 8+ years of continuous use- Ultra slim and light- Can be wall mounted or hung on cables or rods- Mains powered—power supply includedItem Code: Size: Overall Size: Viewing Area:A4FL 8¼" x 11 11 /16" (210 x 297mm) 12 1 ⁄8" x 15 9 ⁄16" (308 x 395mm) 7 7 ⁄8" x 11 5 ⁄16" (2000 x 287mm)A3FL 11 11 /16" x 16½" (297 x 420mm) 15 5 ⁄8" x 20½" (397x 521mm) 11 5 ⁄16" x 16 1 ⁄8" (287 x 410mm)A2FL 16½" x 23 3 ⁄8" (420 x 594mm) 20½" x 27 5 ⁄16" (521 x 694mm) 16 1 ⁄8" x 23" (410 x 584mm)C8511FL 8½" x 11" (216 x 279mm) 12" x 14½" (304 x 368mm) 8 1 ⁄8" x 10 5 ⁄8" (206 x 269mm)66

Light boxes - suspended- Completely even spread of light which eliminatesshadows- Takes inkjet prints, duratans or standard paper up to135gsmCold cathode light boxesOnly 1”(25mm) thick- Graphics can be changed in seconds- Extremely slim floating light boxes, single or double sided- Invisible power supply, no ugly power cablesCompact cold cathode light box with a silver plastic frame suspended onrods with a low-voltage 12 volt power supply. Uses the very latest lighttechnology.Units can be used as headers with acrylic pockets underneath, as a set of 3units to create a really powerful illuminated display or with the digital screenas part of a high technology presentation.- size A3–11¾” x 16½” (297mm x 420mm) can be used portrait orlandscape- cold cathode tube incredibly bright - approximately 2000 lux levels- units are incredibly light weight- graphics can be changed in seconds- profile size 1 5 /8” (40mm) width x 1” (25mm) depthItem Code:DCA3-DCDCDA3-DCDCA2-DCSize:A3 single sided, landscape/portraitsupplied with PO2 supportsA3 double sided, landscape/portraitsupplied with PO2 supportsA2 single sided, landscape/portraitsupplied with PO2 supportsXtraLiteProfile at topand bottom onlyUse XtraLite in windows and interiors. Ideal for exhibitionstands, reception areas and information centers.NEW!! Supplied as a kit with necessary hardware.Standard XtraLite:- T5 tubes. Aperture lamps with an average lamp life of 9,000 hours- supplied with cables or rods, transformer, power connectors andisolators-available in custom sizesItem Code: Size: Dimensions Fixing :KXLA1C/SI A1 23 3 /8” x 33 1 /8” (594 x841mm) Cables: 4m floor/ceilingKXLA1R/SI A1 23 3 /8” x 33 1 /8” (594 x841mm) Rods: 3m floor/ceiling*Supplied double sided unless otherwise specified.Up to100,000 hrsLED LifeLED Xtralite:Best Value – Eco friendly and low maintenance costs- Up to 100,000 hrs LED life (i.e. 10 years maintenance free)- (Standard tubes with 9,000 hrs life would have to be changed 20times – save on tube costs and labo r costs)- Top/Bottom clip frame for rapid poster change- Eco friendly- Up to 80% less power consumption compared to traditionalflorescent tubes- Cool to touch- 40 watt DC power supplyItem Code: Size: Dimensions Fixing :KXLA1LEDC A1 23 3 /8” x 33 1 /8” (594 x841mm) Cables: 4m floor/ceilingKXLA1LEDR A1 23 3 /8” x 33 1 /8” (594 x841mm) Rods: 3m floor/ceiling*Supplied double sided unless otherwise specified.67

Component measurementsAll measurements are in millimetres unless stated L=Length W=Width H=Height Ø=Diameter D=Depth Int=Internal 25.4mm = 1”Guarantee All metal components have a lifetime guarantee. All other products excluding lamps and fuses are covered under a 12 month warranty.Item Allen Page Dimensions:code: key: No.AC 26 W=19; H=11.5ACD 26 W=28; H=9.5ACL 26 W=28; H=9.5C2 18 2m cable; top fitting Ø=16C2A4F •• 19 Top fitting Ø=18; floor fitting Ø=15C2CW-15 •• 19 Wall brackets Ø=38; 40mm from wallto back cable; floor fitting Ø=16C2CW-30 •• 19 Wall brackets Ø=38; 40mm from wallto back cable; floor fitting Ø=16C2WF-15 •• 19 Wall brackets Ø=38; 40mm from wallto back cable; floor fitting Ø=15C2WF-30 •• 19 Wall brackets Ø=38; 40mm from wallto back cable; floor fitting Ø=15C2WW-15 •• 19 Wall brackets Ø=38; 40mm from wallto back cableC2WW-30 •• 19 Wall brackets Ø=38; 40mm from wallto back cableCA4 • 17 4m cable; top fitting Ø=16; bottomfitting Ø=15CA4-3 • 24 Top fitting Ø=16; bottom fitting Ø=15CAA •• 17 4m cable; fittings Ø=38CAF •• 17 4m cable; top bracket Ø=38;floor fitting Ø=15CAT • 18 Weight 100H x 30Ø; weighs 0.55kgCCT • 18 Weight 100H x 30Ø; weighs 0.55kgCCW • 17 3m cable; top fitting Ø=16; projects40 from wallCD-4 • 18, 24 W=5; Ø=25CD-10 • 37 W=5; Ø=25CG01 • 20 L=20; Ø=16CG01-3 •• 24, 31 L=21; Ø=16CG02 • 20 L=32; Ø=16CG03 • 20 L=15; Ø=10CG03-3 • 31 L=15; Ø=10CG04 • 20 L=22; Ø=10CG04-3 • 31 L=22; Ø=10CG06 • 22 L=20; Ø=16CG07 • 22 L=32; Ø=16CG08 • 20 L=31; Ø=21; 8.5mm Ø hole required15mm from edge of panelCG09 • 20 L=22; Ø=16CG11 •• 20, 22 L=27; Ø=16CG11-3 ••• 25, 31 L=28; Ø=16CG12 •• 20 L=30; Ø=18CG12-3 ••• 24, 31 L=31; Ø=18CG13 •• 20, 22 L=27; Ø=18CG13-3 ••• 25, 31 L=28; Ø=18CG14 • 20 L=20; Ø=20.5CG14-3 •• 24, 31 L=21; Ø=20.5CG15 • 22 L=20; Ø=20.5CG15-3 •• 25, 32 L=20.5; Ø=21CG21 •• 20, 22 L=46; Ø=16CG21-3 ••• 25, 31 L=46; Ø=16CG22 •• 20 L=52; Ø=18CG22-3 ••• 24, 31 L=52; Ø=18CG23 •• 20, 22 L=46; Ø=18CG23-3 ••• 25, 31 L=46; Ø=18CH01 • 21 L=16; Ø=16CH01-3 • 25, 32 L=17; Ø=16CH02 • 21 L=24; Ø=16CH02-3 • 25, 32 L=24; Ø=16CQQ • 18, 26, 62 2m Cable;top and bottom fitting Ø=16CS01 • 22 D=11; Ø=16CS01-3 • 25, 32 D=11; Ø=16CS03 •• 21, 47 L=14; Int Ø=12; Int D=6; Ø=16CS03-3 •• 25, 32, 47 L=15; Int Ø=12; Int D=6; Ø=16CS04 •• 21, 47 L=20; Int Ø=12; Int D=6; Ø=16CS05 •• 23 L=14; Ø=16CS05-3 •• 32 L=15; Ø=16CS06 •• 23 L=20; Ø=16CS07 •• 23 L=28; Ø=16CS08 •• 59 L=12; Ø=12CS08-3 •• 59 L=16; Ø=16CS09 • 23 L=17; Ø=16CS11 •• 22 L=36; Ø=18CS11-3 ••• 25, 32 L=37; Ø=18CS12 • 21 H=28; D=14.6; Ø=1668Item Allen Page Dimensions:code: key: No.CS12-3 •• 32 H=27; D=26; Ø=16CS13 •• 21 L=21.5; Ø=16CS13-3 •• 24, 31 L=23.5; Ø=16CS21 •• 22 L=64; Ø=16CS21-3 •• 25, 32 L=64; Ø=16CS22 • 21 H=28; D=21.2; Ø=16CS23 •• 21 L=35; Ø=16CS23-3 •• 24, 31 L=37; Ø=16CWF • 17 3m cable; projects 40 from wall;floor fitting Ø=15CWW • 17 3m cable; projects 40 from wall;fitting plate Ø=38HDS 18, 37 D=15; Ø=50HR10-3 • 31 L=790; Ø=10KC2-CG05 •• 18 Top fitting Ø=16; support Ø=23KC2-CG05-10 •• 18 Top fitting Ø=16;KMDB/SI • 26 H=350; D=350; cables/rodsproject 40mm & 340mm fromwallKMSB-25/SI 26 H=30; Ø=35;cable fitting 25mm from wallKMSB/SI 26 H=60; Ø=60;cable fitting 50mm from wallKMSB-100/SI 26 H=110; Ø=110; cable fitting100mm from wallP01 15 Ø=38P01-PC01 18, 24, 37 H=15; Ø=38P02 21, 25, 32, 33, 35, 39 Ø=12; D=6P08 • 15, 22, 25, 32, 36, 39 H=8; Ø=16PC01/I 26, 59 L=12; Ø=16PC31 14 L=18PR01-I 26, 59 L=12; Ø=16R1000-10 37 L=1000; Ø=10R1000P 23, 33 L=1000; Ø=6R1500 33 L=1500; Ø=6R1500-10 37 L=1500; Ø=10R500 33 L=500; Ø=6R500-10 37 L=500; Ø=10R500P 23, 33 L=500; Ø=6RAAS •• 33 Top fitting Ø=15;bottom fitting Ø=18RAS • 33 Top & bottom fitting Ø=18RAS-10 37 Top fitting Ø=20;Bottom fitting Ø=22RB1 30 1m rod; top fitting Ø=16RB2 30 2m rod; top fitting Ø=16RB3 30 3m rod; top fitting Ø=16RBCF3 30 3m rod; top fitting Ø=16;bottom fitting Ø=15RBT1 30 1m rod; top fitting Ø=16RBT2 30 2m rod; top fitting Ø=16RBT3 30 3m rod; top fitting Ø=16RBTF3 30 3m rod; top fitting Ø=16;bottom fitting Ø=15RC10-6 • 37 L=25; Ø=10REC • 23, 33 L=16; Ø=12REC-10 31, 37 L=15; Ø=10REC-P/BL 23, 33 L=17; Ø=8.5RG01 • 34 L=25; Ø=16RG01-10 •• 38 L=29; Ø=18RG02 • 34 L=36; Ø=16RG02-10 •• 38 L=40; Ø=18RG05 •• 35 L=16; Ø=16RG06 • 36 L=25; Ø=16RG06-10 •• 39 L=29; Ø=18RG07 • 36 L=36; Ø=16RG07-10 •• 39 L=40; Ø=18RG11 •• 34, 36 L=30; Ø=16RG11-10 ••• 38 L=34; Ø=18RG12 •• 34 L=33; Ø=18RG12-10 ••• 38 L=37; Ø=18RG13 •• 34, 36 L=30; Ø=18RG13-10 ••• 38 L=34; Ø=18RG14-10 •• 38 L=29; Ø=20.5RG21 •• 34, 36 L=46; Ø=16RG21-10 ••• 38 L=68; Ø=16RG22 •• 34 L=52; Ø=18RG22-10 ••• 38 L=56; Ø=18Item Allen Page Dimensions:code: key: No.RG23 •• 34, 36 L=46; Ø=18RG23-10 ••• 38 L=50; Ø=18RGN01 • 34 L=25; Ø=16RH01 • 35 L=19; Ø=16RH01-10 • 38 L=23; Ø=18RH02 • 35 L=24; Ø=16RH02-10 • 38 L=28; Ø=18RP • 33 Ø=18RPA •• 33 Ø=15RR01 •• 36 L=31; Ø=16RR01-10 •• 39 L=40; Ø=18RR01-3/10 ••• 32 L=33; Ø=18RR01-3/6 ••• 32 L=29; Ø=16RR01-6/10 •• 39 L=56; Ø=18RS 33 Ø=18RS01 • 35 D=11; Ø=16RS03 •• 33, 35, 47 L=17.5;Int Ø=12;Int D=6; Ø=16RS03-10 •• 39, 47 L=22; Ø=18RS04 •• 35, 47 L=21; Int Ø=12;Int D=6; Ø=16RS04-10 •• 39, 47 L=26; Ø=18RS05 •• 36 L=17; Ø=16RS05-10 •• 39 L=22; Ø=18RS06 •• 36 L=20; Ø=16RS06-10 •• 39 L=26; Ø=18RS08 •• 59 L=18; Ø=16RS-10 37 L=22; Ø=20RS11 •• 36 L=39; Ø=16RS11-10 •• 39 L=43; Ø=18RS12 • 35 H=28; D=18.1;Ø=16RS12-10 •• 38 L=20; Ø=18RS13 •• 34 L=25; Ø=16RS13-10 • 38 L=30; Ø=18RS21 •• 36 L=64; Ø=16RS21-10 •• 39 L=68; Ø=18RS22 •• 35 L=30; D=24.2;Ø=16RS23 •• 34 L=38; Ø=16RS23-10 • 38 L=38; Ø=18RSA • 33 Ø=15WM01 •• 15 L=30WM02 •• 15 L=30WM03 • 15 L=16WM04 • 15 L=16WM05 • 13 L=14; Ø=16WM05-13 • 13 L=25; Ø=16WM05L-20 • 13 L=40; Ø=16WM06 15 L=19; Ø=16WM07 • 15 L=28; Ø=16WM08 • 13 L=32; Ø=16WM09 •• 14 L=31; Ø=16WM10 • 15 L=39; Ø=16;24mm from wallWM11 •• 33 L=31; Ø=16WM11-10 •• 37 L=36; Ø=18WM11L-10 •• 37 L=59; Ø=18WM12 • 13 L=20; Ø=12WM15 • 13 L=25; Ø=25WM16 • 13 L=50; Ø=25WM17 • 13 L=75; Ø=25WM18 • 13 L=25; Ø=16WM19 13 Ø=16WM20 • 14 Ø=25; D=5.5WMS-2 14 D=2WMS-3 14 D=3ALLEN KEYS:To see which allen key each component requires,check the color code in the list above against thegrid below:AK1.5 1.5mm •AK2.0 2.0mm •AK2.5 2.5mm •AK3.0 3.0mm •AK4.0 4.0mm •AK5.0 5.0mm •AK6.0 6.0mm • 25.4mm = 1”

Displays, signage and lighting that increase saleswww.fairfielddisplays.co.uk