HFM-401/405 - Teledyne Hastings Instruments
HFM-401/405 - Teledyne Hastings Instruments
HFM-401/405 - Teledyne Hastings Instruments
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
CAUTIONThis instrument is available with multiple pin-outs.Ensure electrical connections are correct.CAUTIONThe 400-I series flow meters are designed for IECInstallation/Over voltage Category II – single phase receptacleconnected loads.NOTEThe <strong>Hastings</strong> 400 Series flow meters are designed forINDOOR and OUTDOOR operation.CAUTIONIn order to maintain the integrity of the Electrostatic Dischargeimmunity both parts of the remote mounted version of the <strong>HFM</strong>-I-400 instrument must be screwed to a well grounded structure.CAUTIONIn order to maintain the environmental integrity of the enclosurethe power/signal cable jacket must have a diameter of 0.12 -0.35” (3 – 9 mm) for the cable gland or 0.25 - 0.275” (6.5 – 7mm) for the circular connector. The nut on the cable gland mustbe tightened down sufficiently to secure the cable. This cablemust be rated for at least 85°C.<strong>401</strong>-<strong>405</strong> SERIES - vi -