Stow Davis Specification Guide - OEC Business Interiors

American Elect, continued.Vertical cabinetsare available in two widths—20 9 ⁄16"W single-doorcabinets and 39 5 ⁄8"W double-doorcabinets. Configurationsinclude shelves,wardrobes, and lateral files.An unfinished back is standard;however, a finishedback is available.Top3 /4"Top overhangs bodyof cabinet 3 ⁄4"; therefore,two adjacent cabinets willremain separated by a1 1 ⁄2"-W space.Workwalls have an unfinishedback and must beused against a wall. A finishedback is not available.Two-shelfboxTopTask trayHorizontal1 1 /2"Project organizers areavailable in service modulesand workwalls to provideconvenient storage forpapers, files, and tools..ABCTop of service modules,vertical cabinets, and workwallsare standard with an“A”-edge profile. Two otherprofiles are available—“B”and “C.”Locks & KeyingFront-removable lock isavailable with random, consecutive,or specific keyingoptions. Master-keyed lockis available.cPage 413Desks have face-lockedpedestals. Lock secures alldrawers in the pedestal.The center drawer also hasa lock located in the centerof the drawer front.Desk-height returnshave face-locked pedestals.Lock secures all doors anddrawers in the pedestal.Credenzas have facelockedpedestals. Locksecures all doors and drawersin the pedestal.Vertical cabinets haveface-locked box and filedrawers. The cabinet doorsdo not lock.Service modules andworkwalls have face-lockeddoors..ConnectionsRun-off table must beconnected to a kneespacecredenza to provide stability.Connecting end isshaped to mate with credenzaor desk. The connectionforms a flush-height,L-shape configuration.Attachment brackets areincluded with the table.Desk-height returnattaches to a single-pedestaldesk or kneespace credenzato form a flush-height,L-shape configuration.Connecting end is shapedto mate with credenza ordesk. Attachment bracketsare included with the return.Bridge attaches to asingle-pedestal desk andkneespace credenza usingsupport plates that areincluded with the bridge.Connecting end is shapedto mate with credenza ordesk. Together they form aflush-height, U-shapeconfiguration..Service module attachesto the top of a credenzausing attachment hardwarethat is included with theservice module.Workwall must attachbetween two vertical cabinetsfor support.Clearance between worksurfaceand underside ofservice module or workwallcabinet is 20".Wiring & CablingContinuous wire accessslot is standard along theback edge of a credenza toroute cords behind the credenza.Grommets andcable ports are available toreplace the continuous wireaccess slot on credenzaswith a finished back only.Continuous wire managementbrush strip isstandard along the bottomedge of tackboards to allowwires and cables to passthrough to the credenza’swire access slot.Grommets are available,factory installed, to allowcords and cables to passthrough the worksurface.GrommetsBridges•Credenzas with finished• • •back.Left Center RightDesks • •Returns • • •.12 Stow Davis Specification Guide