Chapter 7 - Veterinary Instrumentation

www.vetinst.comTRAUMA IMPLANTS & INSTRUMENTS 7Modular Metal Screwdriver for2.4mm Crosshead Screws,1.5/2.0mm and 2.7/3.5mm Hex ScrewsHex and Cross Head Screwdriver InsertsThe handpiece is made from stainless steel and takes special quickrelease inserts. The handpiece is sculpted for comfort and ease of use.The inserts included with the set are:*Crosshead for Crosshead 2.4mm Screws.*2.5mm Hex Drive for 2.7 and 3.5 Cortical Screws.*1.5mm Hex Drive for 1.5 and 2.0 Cortical Screws.The Screwdriver Set is ideal for TTA users.HEX AND CROSS HEAD SCREWDRIVER INSERTSTTA222SDH35SCross Head Screwdriver Insert Fits 2.4mm Screws100mm £49.50Hex Screwdriver Attachment Insert Fits 2.7/3.5/4.0 Screws125mm £49.50SDH455 Hex Screwdriver Attachment Insert Fits 4.5/5.5 Screws 135mm £49.50QRCS01F Quick Release Handle £145.00Please note this screwdriver will not accept AO Quickfit Attachments.METAL MODULAR SCREWDRIVER AND INSERTSSDMMH Modular Metal Screwdriver £145.00SDMM1.5 1.5 Hex Drive Insert for 1.5 and 2.0 Cortical Screws £30.00SDMM2.5 2.5mm Hex Drive Insert for 2.7 and 3.5 Cortical Screws £30.00SDMM2.4C Crosshead insert for Crosshead 2.4mm Screws £30.00SDMMSET Metal Modular Screwdriver Set £175.00CountersinksStar Drive Screwdriver SetAll VILock Screws are available with the international ‘Torx’ style StarDrive. The interface between the screw head and screwdriver issignificantly stronger and the stripping of screw heads consequently muchrarer. The tip of the Screwdriver is tapered and ‘picks up’ the screwswithout the requirement for a Screw Holding Sleeve.Many surgeons do not possess the relevant Star Drive Screwdrivers so weare pleased to offer a Modular Handle plus Inserts for the standard 3.5mm,2.7/2.4mm and 2.0mm Screws.The Handle and Inserts are available separately but are cheaper as theSet. The Handle is made from white autoclavable Teflon which does not‘shed’ like the traditional fibre type. The cap revolves in the palm of thehand for extra comfort.STAR DRIVE SCREWDRIVER INSERTSSDT1535 Star Drive Insert for 3.5 Locking Screws £65.00SDT82427 Star Drive Insert for 2.7 (2.4 head) and 2.4 Locking Screws £65.00SDT620 Star Drive Insert for 2.0 Locking Screws £65.00QRCS01F Quick Release Handle £145.00SDTSET Handle and Star Drive Insert Set (one of each ) £325.00If the screw is destined to screw down onto the surface of the bone without aplate, it is helpful to contour the top of the screw hole to fit the screw head.This procedure is especially important when lag screwing relatively smallfragments. Failure to countersink may lead to fracture of the bone fragment.COUNTERSINKS - DENTAL FITCOUDEN Mini Countersink Dental Fit for 1.5/2.0mm Screws 55mm £75.00DC20 Handle for 1.5/2.0mm Dental Fit £145.00COUNTERSINKS - AO QUICK COUPLINGCOU2535 Small Countersink AO Quick Fit Coupling 70mm 2.7/3.5 £55.00COU4565 Large Countersink AO Quick Fit Coupling 130mm 4.5 £55.00QRCS01F Quick Release Handle £145.00COUNTERSINKS - KNURLED HANDLE / T HANDLECOU1520 Mini Countersink with Handle for 1.5/2.0mm Screws £85.00COU2535T Small Countersink ‘T’ Handle 2.7/3.5 Screws 130mm £55.00COU4565T Large Countersink ‘T’ Handle 4.5 Screws 175mm £55.00165