Chapter 7 - Veterinary Instrumentation

www.vetinst.comTRAUMA IMPLANTS & INSTRUMENTS 7Adjustable Drill GuideTriple Drill GuidesTriple drill guides are used to accurately position drills and ‘K’ or arthrodesiswires. The three holes in the head allow for the placement of parallelderotation wires.TRIPLE DRILL GUIDE/SLEEVESSLG1115 Double Drill Guide/ Sleeve for 1.1 & 1.5mm £120.00Drills 100mmSLG0020 Triple Drill Guide/ Sleeve for 2.0mm Drills 115mm £110.00SLG0025 Triple Drill Guide/ Sleeve for 2.5mm Drills 115mm £110.00Our adjustable Drill Guide allows accurate placement of drill holes bypredetermination of drill entry and exit points. Locks onto bone to minimiseerrors.• The swivelling point allows use of the guide where access is limited.• Supplied with 2.0, 2.5 and 3.5 Drill Sleeves. Use the appropriate Sleevefor the Drill in use.• A scale on the instrument measures hole depth.• Applications include condyle fractures, femoral neck tunnels and screwholes, proximal TPLO screws, ununited anconeal process.In our view this design has significant advantages over ‘CEG’ and ‘C’ guides.Drill Guide 0.7mm/1.0mmDRILL GUIDES & INSERTSADJDG2035 Adjustable Drill Guide for 2.0/2.5/3.5mm Drills 175mm £185.00ADJDG45 Adjustable Drill Guide 4.5mm Drills 190mm £185.00ADJSL55Slider to fit 5.5 Cortical (equine) Screwsfits ADJDG45 75mm £60.00Drill Guides and InsertsDue to the size limitations, this device serves only as a drill guide and cannotbe used as an insert sleeve or tap guide.CEG2735DRILL GUIDE 0.7MM /1.0MMCDTIS10 Drill Guide 0.7mm/1.0mm £110.00CEG4565Combination Drill, Tap and Insert SleeveUse of an appropriate sized Drill Guide enables the surgeon to controlexactly the entry and exit points of drills. This ability is extremely important inlag screwing.Various Insert Sleeves are available for each drill size, with an accurateguidance system, and provide exact positioning of holes for lag screwing,(e.g. for a 3.5mm Cortical Screw, Drill 3.5 lag hole in proximal cortex, insertSL3525 and drill through it into the trans cortex. Finally tap and insertScrew.)SMALL DRILL GUIDE (does not include insert sleeves)CEG2735 Small Drill Guide i/d 3.5mm “C” Guide 135mm £77.50LARGE DRILL GUIDE (does not include insert sleeves)CEG4565 Large Drill Guide i/d 6.5mm “C” Guide 140mm £95.00The large end has an internal diameter which matches theclearance drill and tap. The small end has an internal diameterthe same as the pilot drill and an external diameter which fits theclearance drill hole, ie. the same as an insert sleeve. This single instrumentcontains all the guides and sleeves you need to place a lag screw.COMBINATION DRILL, TAP & INSERT SLEEVECDTIS20 Combination Drill, Tap & Insert Sleeve for 2.0 Screws 100mm £110.00CDTIS24 Combination Drill, Tap & Insert Sleeve for 2.4 Screws 105mm £110.00CDTIS27 Combination Drill, Tap & Insert Sleeve for 2.7 Screws 110mm £110.00CDTIS35 Combination Drill, Tap & Insert Sleeve for 3.5 Screws 115mm £110.00CDTIS45 Combination Drill, Tap & Insert Sleeve for 4.5 Screws 130mm £110.00163