Serverview Trap List

A Trap List Overview
This manual shows an overview of SNMP traps viewable in the ServerView alarm
service and explains how to read the trap lists in this manual.
A.1 Notes
A.1 Notes
In this manual, traps shown as "Not supported" or traps not listed are unsupported. (Including traps
not shown as UNKNOWN and traps shown in the class "4" and "5" alarm list in "A.2 How to read the
trap list" (�pg.5)).
Because the Agents of I/O component traps vary, they are supplied by the various vendors.
Depending on the version of the Agents, message content may change. Refer to the manual provided
with the server for details about messages.
When "ENTERPRISE OID" is a version other than "enterprises.231" the contact representative will
vary depending on the vendor it is supplied by.
A.2 How to read the trap list
The displayed content of trap messages is classed in the following way.
1. Pop up messages
2. OS event logs
3. AlarmService alarm list
4. Alarm list of the AlarmService alarm settings
5. MIB file Help alarm list alarm type
The trap list entries are displayed in the following way.
TRAP-TYPE/
Alarm type
Specific Level of
importance
Detailed Messages
(%d: optional number %s: system variable)
: Name of the trap.
Corresponding to "5. MIB file Help alarm list alarm type".
: Name of the trap.
Corresponding to "3. AlarmService alarm list" and "4. Alarm list of the
AlarmService alarm settings".
: List number of the trap.
: Level of importance (error class) of the trap.
: "1. Pop up messages" and "2. OS event logs".
: Additional explanation or problem solution for the trap.
Remarks
5