Serverview Trap List

More documents

Recommendations

Info

16 B Trap List B.3 SNI-SERVER-CONTROL-MIB (sc.mib) Traps from the ServerView agent or RSB. TRAP-TYPE/ Alarm type testTrap Test trap fanError Fan failed tempOk Temperature normal tempWarn Temperature warning tempCritical Temperature critical trapOnBattery AC failed, on battery trapOnMains AC OK selftestWarning Controller selftest warning selftestError Controller selftest error table: SNI-SERVER-CONTROL-MIB Trap (ENTERPRISE : enterprises.231.2.10.2) Specific Level of importance 600 INFORMAT IONAL Detailed Messages (%d: optional number %s: system variable) Test trap from server %s (no error). No error. 601 CRITICAL Fan %d failed in cabinet %d of server %s. 602 INFORMAT IONAL Temperature at sensor %d in cabinet %d of server %s is within normal range. 603 MAJOR Temperature at sensor %d in cabinet %d of server %s has reached the warning level. 604 CRITICAL Temperature at sensor %d in cabinet %d of server %s has reached the critical level. 606 CRITICAL AC failure. Cabinet %d is running on battery power since %d seconds. In %d minutes server %s will shutdown. 607 INFORMAT IONAL Mains returned after power failure in cabinet %d at server %s. 608 MINOR The Server Management controller in cabinet %d has detected an minor problem during selftest of server %s. 609 CRITICAL The Server Management controller in cabinet %d of server %s failed. Remarks A fan error occurred. Refer to "Contact Information" in "Read me First", and contact your maintenance engineer. The internal temperature of the server is within the normal range. No error. A device temperature error occurred. Check the room temperature. If room temperature is normal check whether the fan has failed. Other errors in hardware are possible. Refer to "Contact Information" in "Read me First", and contact your maintenance engineer. Running on UPS battery power. Check that UPS power cables are not unplugged and there has been no power interruption. Stopped running on the UPS battery. No problem. If multiple messages are detected, it is possible that the Server Management controller has failed. Refer to "Contact Information" in "Read me First", and contact your maintenance engineer.
TRAP-TYPE/ Alarm type svCommunicationFailure Communication lost scbUnconfiguredUPSDetected UPS not configured scbUPSNotdetected UPS not detected scbUnconfiguredBBUDetected BBU not configured scbBBUNotdetected BBU not detected notEnoughCabinets SE's missing tooManyCabinets Too many SE's cabinetSwitchedOff Cabinet switched off cabinetSwitchedOn Cabinet switched on internalError Internal error serverShutdown Server shutdown 610 MINOR Communication with the Server Management controller in cabinet %d of server %s lost. 611 INFORMAT IONAL B.3 SNI-SERVER-CONTROL-MIB (sc.mib) table: SNI-SERVER-CONTROL-MIB Trap (ENTERPRISE : enterprises.231.2.10.2) Specific Level of importance UPS detected by server %s, but no UPS is configured. 612 MAJOR A UPS is configured but no UPS detected by server %s. 613 INFORMAT IONAL 614 INFORMAT IONAL BBU detected by server %s, but no BBU is configured. A BBU is configured but no BBU is detected by server %s. 615 MAJOR The actual number of storage extensions at server %s is lower than the configured. 616 MINOR The actual number of storage extensions at server %s is higher than the configured. 617 INFORMAT IONAL 618 INFORMAT IONAL 620 INFORMAT IONAL 621 INFORMAT IONAL Detailed Messages (%d: optional number %s: system variable) Cabinet %d was switched off because of %s (server %s). Cabinet %d was switched on because of %s (server %s). Internal error #%d in server management controller software. (module %s at server %s). The reason %s causes a shutdown at server %s. Remarks If recovered in event ID:10636 there is no problem. If not restored, refer to "Contact Information" in "Read me First", and contact your maintenance engineer. It is possible that there is an error in the settings. Recheck the settings. If there is no error in the settings it is possible that a UPS error occurred. Refer to "Contact Information" in "Read me First", and contact your maintenance engineer. There is an error in the configuration of the external memory device. Recheck this. Server%s has turned off. Server%s has turned on. This is a software error. Specify the name of the module and, refer to "Contact Information" in "Read me First", and contact your maintenance engineer. Shutdown at the server is performed by ordering shutdown. 17
Page 1: About this manual A Trap List Overv
Page 4 and 5: 4 B.37 EM4513-MIB (unicorn-trap.mib
Page 6 and 7: 6 A Trap List Overview A.3 Screen d
Page 8 and 9: 8 A Trap List Overview ● MIB file
Page 10 and 11: 10 B Trap List TRAP-TYPE/ Alarm typ
Page 22 and 23: 22 B Trap List sniScShutdownCancell
Page 26 and 27: 26 B Trap List B.5 SNI-HD-MIB (hd.m
Page 32 and 33: 32 B Trap List B.11 FSC-SERVERCONTR
Page 34 and 35: 34 B Trap List table: FSC-SERVERCON
Page 52 and 53: 52 B Trap List B.19 PROMISE-UNIFIED
Page 56 and 57: 56 B Trap List B.21 UPSMAN (Upsman.
Page 58 and 59: 58 B Trap List B.23 PowerNet-MIB (p
Page 66 and 67:
66 B Trap List TRAP-TYPE/ Alarm typ
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
80 B Trap List B.24 Alert-Definitio
Page 82 and 83:
82 B Trap List B.27 FUJITSU-SERVERV
Page 84 and 85:
84 B Trap List B.30 SW-MIB (fcswitc
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
90 B Trap List B.34 BRIDGE-MIB (tra
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
100 B Trap List TRAP-TYPE/ Alarm ty
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
B Trap List 116
show all

Serverview Trap List

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?