Serverview Trap List

About this manual 

A Trap List Overview 

This describes how to read the trap list table and the screen display examples. 

B Trap List 

The trap list is described according to its various classifications. 

■ Trademarks 

ServerView V3.6 Trap List 

Microsoft, Windows, MS, Windows Server are registered trademarks of the Microsoft Corporation in the USA and other 

countries. 

Intel and Pentium are registered trademarks or trademarks of Intel Corporation or its subsidiaries in the USA and other 

countries. 

All other hardware and software names used are trademarks or registered trademarks of their respective manufacturers. 

Other product names are copyrights of their respective manufacturers. 

All Rights Reserved, Copyright © FUJITSU LIMITED 2005 

1

Contents 

A Trap List Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 

A.1 Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 

A.2 How to read the trap list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 

A.3 Screen display examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 

B Trap List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 

B.1 SNI-TRAP-MIB (trap.mib) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 

B.2 SNI-MYLEX-MIB (mylex.mib) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 

B.3 SNI-SERVER-CONTROL-MIB (sc.mib) . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 

B.4 SNI-SERVERVIEW-MIB (serverview.mib) . . . . . . . . . . . . . . . . . . . . . . . . . .25 

B.5 SNI-HD-MIB (hd.mib ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 

B.6 SNI-NT-CLUSTER-MIB (ntcluster.mib) . . . . . . . . . . . . . . . . . . . . . . . . . . . .26 

B.7 PCI-HOTPLUG-MIB (pcihotplug.mib) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 

B.8 SERVERVIEW-STATUS-MIB (status.mib) . . . . . . . . . . . . . . . . . . . . . . . . . .29 

B.9 SIEMENS-MULTIPATH-MIB (mp.mib) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 

B.10 SERVERVIEW-DUPLEXDATAMANAGER-MIB (ddm.mib) . . . . . . . . . . . .30 

B.11 FSC-SERVERCONTROL2-MIB (sc2.mib) . . . . . . . . . . . . . . . . . . . . . . . . .32 

B.12 BLADE-MIB (S31.mib) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 

B.13 AdaptecArrayController-MIB (aac.mib) . . . . . . . . . . . . . . . . . . . . . . . . . . .38 

B.14 DESKTRAP-MIB (desktrap.mib) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42 

B.15 DPT-SCSI-MIB (dptscsi.mib) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47 

B.16 MYLEXRAID-MIB (Mlxraid.mib) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 

B.17 MYLEXRAID-FJ-MIB (Mlxraidfj.mib) . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 

B.18 FASTTRAK-MIB (promisev1.mib) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 

B.19 PROMISE-UNIFIED-MIB (promiseraid.mib) . . . . . . . . . . . . . . . . . . . . . . .52 

B.20 RAID-Adapter-MIB (megaraid.mib) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54 

B.21 UPSMAN (Upsman.mib) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 

B.22 UPS-MIB (RFC1628.mib) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 

B.23 PowerNet-MIB (powernet.mib) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 

B.24 Alert-Definition-Originator-MIB (F5emt2o.mib) . . . . . . . . . . . . . . . . . . . . . .80 

B.25 LDSM-MIB (ldsm.mib) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80 

B.26 LDCM-MIB (Ldcm.mib) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81 

B.27 FUJITSU-SERVERVISOR-MIB (Servervi.mib) . . . . . . . . . . . . . . . . . . . . .82 

B.28 RFC1157 (RFC1157.mib) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82 

B.29 ROMPILOT-MIB (ROMPILOT.MIB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82 

B.30 SW-MIB (fcswitch.mib) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84 

B.31 ADAPTECDURALINK-MIB (duralink.mib) . . . . . . . . . . . . . . . . . . . . . . . . .84 

B.32 TapeAlert-MIB (tapealrt.mib) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85 

B.33 IOMMIB (iommib.mib) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88 

B.34 BRIDGE-MIB (trap1493.mib) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90 

B.35 RMON-MIB (trap1757.mib) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90 

B.36 INTEL-WFM-MIB (WFM.mib ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90 

3

4 

B.37 EM4513-MIB (unicorn-trap.mib) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 

B.38 NET-SNMP-MIB (net-snmp.mib) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115


This manual shows an overview of SNMP traps viewable in the ServerView alarm 

service and explains how to read the trap lists in this manual. 

A.1 Notes 

A.1 Notes 

In this manual, traps shown as "Not supported" or traps not listed are unsupported. (Including traps 

not shown as UNKNOWN and traps shown in the class "4" and "5" alarm list in "A.2 How to read the 

trap list" (�pg.5)). 

Because the Agents of I/O component traps vary, they are supplied by the various vendors. 

Depending on the version of the Agents, message content may change. Refer to the manual provided 

with the server for details about messages. 

When "ENTERPRISE OID" is a version other than "enterprises.231" the contact representative will 

vary depending on the vendor it is supplied by. 

A.2 How to read the trap list 

The displayed content of trap messages is classed in the following way. 

1. Pop up messages 

2. OS event logs 

3. AlarmService alarm list 

4. Alarm list of the AlarmService alarm settings 

5. MIB file Help alarm list alarm type 

The trap list entries are displayed in the following way. 

TRAP-TYPE/ 

Alarm type 

Specific Level of 

importance 

Detailed Messages 

(%d: optional number %s: system variable) 

: Name of the trap. 

Corresponding to "5. MIB file Help alarm list alarm type". 

: Name of the trap. 

Corresponding to "3. AlarmService alarm list" and "4. Alarm list of the 

AlarmService alarm settings". 

: List number of the trap. 

: Level of importance (error class) of the trap. 

: "1. Pop up messages" and "2. OS event logs". 

: Additional explanation or problem solution for the trap. 

Remarks 

5

6 


A.3 Screen display examples 

The screen display examples are as follows: 

● Popup 

● OS Event log

● AlarmService (Alarm Monitor) alarm list 

● Alarm list of the AlarmService alarm settings 

A.3 Screen display examples 

7

8 


● MIB file Help alarm list 

In order to use this display the above screens, you must perform the following operations: 

1. Start the ServerView AlarmService. 

2. Click AlarmService [Help]. 

3. Click [Agent alarm information] in the [Contents]. 

4. Click [RFC1157.mib] in "AlarmMib". 

■ Description examples that appear in the mib file. 

Description examples that appear in the mib file are shown below. 

testTrap TRAP-TYPE 

ENTERPRISE sniServerMgmt 

VARIABLES { 

trapServerName, 

trapTime 

} 

DESCRIPTION 

"Test trap to verify trap connection." 

--#TYPE "Test trap" 

--#SUMMARY "Test trap from server %s (no error)." 

--#ARGUMENTS { 0 } 

--#SEVERITY INFORMATIONAL 

--#TIMEINDEX 1 

--#HELP "Note: This is no error condition." 

--#HELPTAG 

--#STATE OPERATIONAL 

::= 600


B.1 SNI-TRAP-MIB (trap.mib) 

Traps from the ServerView console. 

TRAP-TYPE/ 

Alarm type 

sniNWVolSysMounted 

Volume SYS is mounted 

sniNWSysVolumeDismounted 

Volume SYS is dismounted 

sniNWVolumeMounted 

Volume is mounted 

sniNWVolumeDismounted 

Volume is dismounted 

sniNWDownServer 

Server is going down 

(NetWare) 

sniNWExitToDos 

Server exits to DOS 

sniNWModuleUnloaded 

Module is unloaded 

sniNWClearConnection 

Connection is cleared 

sniNWLoginUser 

User logged into server 

sniNWCreateBinderyObj 

Bindery object created 

sniNWDeleteBinderyObj 

Bindery object deleted 

sniNWChangeSecurity 

Security changed (NetWare) 

sniNWActivateScreen 

Screen activated 

sniNWUpdateScreen 

Screen updated 

sniNWUpdateCursor 

Cursor position updated 

sniNWKeyWasPressed 

Key pressed 

sniNWDeactivateScreen 

Screen deactivated 

sniNWTrusteeChange 

Trustee changed (NetWare) 

sniNWOpenScreen 

Screen opened 

table: SNI-TRAP-MIB Trap (ENTERPRISE : enterprises.231) 

Specific 

Level of 

importance 

0 INFORMAT 

IONAL 


(%d: optional number %s: system 

variable) 


Remarks 

Volume SYS is mounted on server %s A Netware monitor 

Trap. Not supported. 

1 CRITICAL Volume SYS is dismounted on server %s ↑ 

2 INFORMAT 

IONAL 

3 INFORMAT 

IONAL 

Volume %s is mounted on server %s ↑ 

Volume %s is dismounted on server %s ↑ 

4 CRITICAL Server is going down: %s ↑ 

7 CRITICAL Server exits to DOS : %s ↑ 

8 INFORMAT 

IONAL 

9 INFORMAT 

IONAL 

10 INFORMAT 

IONAL 

11 INFORMAT 

IONAL 

12 INFORMAT 

IONAL 

13 INFORMAT 

IONAL 

14 INFORMAT 

IONAL 

15 INFORMAT 

IONAL 

16 INFORMAT 

IONAL 

17 INFORMAT 

IONAL 

18 INFORMAT 

IONAL 

19 INFORMAT 

IONAL 

20 INFORMAT 

IONAL 

Module %s is unloaded on server %s ↑ 

A connection is cleared on server %s ↑ 

A user logged into server %s ↑ 

A bindery object is created on server %s ↑ 

A bindery object is deleted on server %s ↑ 

Security change has occurred on server 

%s 

A screen is activated on server %s ↑ 

A screen is updated on server %s ↑ 

The cursor position is updated on server 

%s 

A key is pressed on server %s ↑ 

A screen is deactivated on server %s ↑ 

Trustee is changed on server %s ↑ 

A Screen is opened on server %s ↑ 

↑ 

↑ 

9

10 


TRAP-TYPE/ 

Alarm type 

sniNWCloseScreen 

Screen closed 

sniNWModifyDirEntry 

Directory entry changed 

sniNWNoRelinquishControl 

NLM has not relinquished 

control 

sniNWThreadSwitch 

Thread switch has occurred 

sniNWModuleLoaded 

Module loaded 

sniNWCreateProcess 

Process created 

sniNWDestroyProcess 

Process destroyed 

sniNWNewPublic 

New public symbol 

sniNWProtocolBind 

Protocol bound 

sniNWProtocolUnbind 

Protocol unbound 

sniNWAllocateConnection 

Connection allocated 

sniNWLogoutConnection 

User logged out 

sniNWMLIDRegister 

MLID registered 

sniNWMLIDDeRegister 

MLID deregistered 

sniNWDataMigration 

File data migrated 

sniNWDataDeMigration 

File data demigrated 

sniNWQueueAction 

Queue status changed 

sniNWAlert 

Alert written 

sniNWCreateObject 

DS object created 

sniNWDeleteObject 

DS object deleted 

sniNWRenameObject 

DS object renamed 

sniNWValueChanged 

DS object value changed 

sniNWCloseFile 

File closed 

sniNWChangeTime 

Time changed (NetWare) 


Specific 

Level of 

importance 

21 INFORMAT 

IONAL 

22 INFORMAT 

IONAL 

A Screen is closed on server %s ↑ 

Directory entry is changed on server %s ↑ 

23 CRITICAL The NLM %s has not relinquished 

control on server %s 

25 INFORMAT 

IONAL 

27 INFORMAT 

IONAL 

28 INFORMAT 

IONAL 

29 INFORMAT 

IONAL 

32 INFORMAT 

IONAL 

33 INFORMAT 

IONAL 

A thread switch has occurred on server 

%s 

Module %s is loaded on server %s ↑ 

A Process is created on server %s ↑ 

A Process is destroyed on server %s ↑ 

A new public symbol is registered on 

server %s 

A protocol is bound to a MLID on server 

%s 

34 MAJOR A protocol is unbound from a MLID on 

server %s 

37 INFORMAT 

IONAL 

38 INFORMAT 

IONAL 

39 INFORMAT 

IONAL 

40 INFORMAT 

IONAL 

41 INFORMAT 

IONAL 

42 INFORMAT 

IONAL 

43 INFORMAT 

IONAL 

44 INFORMAT 

IONAL 

46 INFORMAT 

IONAL 

47 INFORMAT 

IONAL 

48 INFORMAT 

IONAL 

49 INFORMAT 

IONAL 

50 INFORMAT 

IONAL 

51 INFORMAT 

IONAL 



variable) 

A connection is allocated on server %s ↑ 

A user has logged out of server %s ↑ 

A MLID is registered on server %s ↑ 

A MLID is deregistered on server %s ↑ 

A files data has been migrated on server 

%s 

A files data has been demigrated on 

server %s 

A queue is activated, deactivated, created 

or deleted on server %s 

A Netware Alert message is written to 

the console on server %s. Module %s: %s 

A Directory Service object is created on 

server %s 

A Directory Service object is deleted on 

server %s 

A Directory Service object is renamed on 

server %s 

A Directory Service object's value 

changed on server %s 

A file is closed on server %s ↑ 

Time has changed or a nonuniform time 

adjustment has occurred on server %s 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

Remarks

TRAP-TYPE/ 

Alarm type 

sniInvPollTrapExceeded 

Threshold exceeded 

sniInvPollTrapUnderflow 

Threshold underflow 

sniInvPollDeltaExceeded 

DELTA-Threshold exceeded 

sniInvDeltaTrapUnderflow 

DELTA-Threshold underflow 

sniInvTrapInvalid 

Threshold invalid 

sniInvTrapValid 

Threshold valid 

sniNTDownServer 

Server is going down (NT) 

sniNTLoginUser 

User logged in 

sniNTChangeSecurity 

Security changed (NT) 

sniNTTrusteeChange 

Trustee changed (NT) 

sniNTAlert 

NT Alert written 

sniNTChangeTime 

Time changed (NT) 

sniNTRegChangeName 

Keyname changed 

sniNTRegChangeAttr 

Registry key attributes 

changed 

sniNTRegChangeLastWrite 

Registry last write time 

changed 

sniNTRegChangeSecurity 

Registry key security changed 

sniNTFileChangeName 

File name modified 

sniNTFileChangeDirName 

Directory name modified 

sniNTFileChangeAttr 

File attributes changed 

sniNTFileChangeSize 

File size changed 

sniNTFileChangeLastWrite 

File last write time changed 

sniNTFileChangeSecurity 

File security changed 


Specific 

Level of 

importance 

128 INFORMAT 

IONAL 

129 INFORMAT 

IONAL 

130 INFORMAT 

IONAL 

131 INFORMAT 

IONAL 

132 INFORMAT 

IONAL 

133 INFORMAT 

IONAL 

300 INFORMAT 

IONAL 

301 INFORMAT 

IONAL 

302 INFORMAT 

IONAL 

303 INFORMAT 

IONAL 

304 INFORMAT 

IONAL 

305 INFORMAT 

IONAL 

310 INFORMAT 

IONAL 

311 INFORMAT 

IONAL 

312 INFORMAT 

IONAL 

313 INFORMAT 

IONAL 

320 INFORMAT 

IONAL 

321 INFORMAT 

IONAL 

322 INFORMAT 

IONAL 

323 INFORMAT 

IONAL 

324 INFORMAT 

IONAL 

325 INFORMAT 

IONAL 



variable) 


Threshold exceeded : %s, on Server %s This message shows 

that the threshold 

exceeded the value 

set in the threshold 

manager. 

Threshold underflow : %s, on Server %s ↑ 

DELTA-Threshold exceeded : %s, on 

Server %s 

DELTA-Threshold underflow : %s, on 

Server %s 

Threshold Invalid: %s, on Server %s This message refers 

to the value set in the 

threshold manager. 

Threshold Valid: %s, on Server %s ↑ 

Server is going down : %s 

A user logged into server %s 

Security change has occurred on server 

%s 

A trustee is changed on server %s 

An NT Alert message is written to the 

eventlog (Control String: %s) on server 

%s. 

Time has changed or a nonuniform time 

adjustment has occurred on server %s 

Keyname in registry has been changed on 

server %s 

Attributes for a key or its subtree in 

registry has been changed on server %s 

Last write time for a key or its subtree in 


Security for a key or its subtree in 


A file name has been changed, created or 

deleted on server %s 

A directory name has been changed, 

created or deleted on server %s 

File or directory attributes have been 


File size has been changed on server %s 

Last write time on a file has been 


Security on a file has been changed on 

server %s 

↑ 

↑ 

Remarks 

11

12 


TRAP-TYPE/ 

Alarm type 

sniNTEventLogError 

Eventlog entry: error 

sniNTEventLogWarning 

Eventlog entry: warning 

sniNTEventLogInformation 

Eventlog entry: information 

sniNTEventLogSuccess 

Eventlog entry: success audit 

sniNTEventLogFailure 

Eventlog entry: failure audit 

330 INFORMAT 

IONAL 

331 INFORMAT 

IONAL 

332 INFORMAT 

IONAL 

333 INFORMAT 

IONAL 

334 INFORMAT 

IONAL 

B.2 SNI-MYLEX-MIB (mylex.mib) 

Error entry written to eventlog on server 

%s 

Warning entry written to eventlog on 

server %s 

Warning entry written to eventlog on 

server %s 

Informational entry written to eventlog 

on server %s 

Audit success entry written to eventlog 

on server %s 

Failure audit entry written to eventlog on 

server %s 

Traps from the Mylex Disk Array Controller. For message details, refer to the RAID controller (RAID 

Manager (GAM: Global Array Manager)) manual. 

TRAP-TYPE/ 

Alarm type 

mylexAutoRebuildStarted 

Automatic rebuild started 

mylexManualRebuildStarted 

Manual rebuild started 

mylexRebuildDone 

Rebuild done 

mylexRebuildCanceled 

Rebuild cancelled 

mylexRebuildStatus 

Rebuild status 

mylexRebuildError 

Rebuild error 

mylexRebuildNewDeviceFail 

ed 

Rebuild device failed 

mylexRebuildLogicalDriveFai 

led 

Rebuild drive failed 

mylexParityCheckStarted 

Parity check started 

mylexParityCheckDone 

Parity check done 


Specific 

table: SNI-MYLEX-MIB Trap (ENTERPRISE : enterprises.231.2.10.2) 

Specific 

Level of 

importance 

Level of 

importance 

200 INFORMAT 

IONAL 

201 INFORMAT 

IONAL 

202 INFORMAT 

IONAL 

203 INFORMAT 

IONAL 

204 INFORMAT 

IONAL 



variable) 

Automatic rebuild of device %d on 

channel %d was started at disk array 

adapter in slot %d. The standby device 

%d at channel %d will be used (Server 

%s). 

Manual rebuild was started at disk array 

adapter in slot %d at server %s. 

Rebuild was successfully completed at 

disk array adapter in slot %d (Server %s). 

Rebuild was cancelled at disk array 

adapter in slot %d (Server %s). 

Rebuild status at disk array adapter in slot 

%d: current drive=%d, drive size=%d 

MBytes; %d MBytes remaining (Server 

%s). 

205 MAJOR Rebuild error at disk array adapter in slot 

%d: %d bad blocks detected (Server %s). 

206 MAJOR Rebuild finished at disk array adapter in 

slot %d: new device failed (Server %s). 

207 MAJOR Rebuild finished at disk array adapter in slot 

%d: logical drive failed, %d bad blocks 

detected (Server %s). 

208 INFORMAT 

IONAL 

209 INFORMAT 

IONAL 



variable) 

Parity check was started at disk array 


Parity check was successfully completed 

at disk array adapter in slot %d (Server 

%s). 

Remarks 

Remarks

TRAP-TYPE/ 

Alarm type 

mylexParityCheckCanceled 

Parity check cancelled 

mylexParityCheckStatus 

Parity check status 

mylexParityCheckError 

Parity check error 

mylexParityCheckLogicalDriv 

eFailed 

Parity check: drive failed 

mylexLogicalDriveOffline 

Logical drive offline 

mylexLogicalDriveCritical 

Logical drive critical 

mylexLogicalDriveOnline 

Logical drive online 

mylexPhysicalDeviceDied 

Physical device dead 

mylexPhysicalDeviceAlive 

Physical device online 

mylexWriteBackError 

Write back error 

mylexStateChangeTableFull 

Cache change table full 

mylexAdapterDied 

Disk controller died 

mylexAutoRebuildStarted2 


mylexManualRebuildStarted2 

Manual rebuild started 

mylexRebuildDone2 

Rebuild done 

mylexRebuildCanceled2 

Rebuild cancelled 

mylexRebuildError2 

Rebuild error 

mylexRebuildNewDeviceFail 

ed2 

Rebuild device failed 

mylexRebuildLogicalDriveFai 

led2 

Rebuild drive failed 


Specific 

Level of 

importance 

210 INFORMAT 

IONAL 

211 INFORMAT 

IONAL 

Parity check was cancelled at disk array 


Parity check status at disk array adapter 

in slot %d: current drive=%d, drive 

size=%d MB; %d MBytes remaining 

(Server %s). 

212 MAJOR Parity check error at disk array adapter in 

slot %d: %d bad blocks detected (Server 

%s). 

213 MAJOR Parity check finished at disk array adapter in 

slot %d; logical drive failed: %d bad blocks 

detected (Server %s). 

214 CRITICAL Logical drive %d at disk array adapter in 

slot %d is offline (Server %s). 

215 MAJOR Logical drive %d at disk array adapter in 

slot %d is critical (Server %s). 

216 INFORMAT 

IONAL 

Logical drive %d at disk array adapter in 

slot %d is online (Server %s). 

217 CRITICAL Physical device %d on channel %d at 

disk array adapter in slot %d is DEAD 

(Server %s). 

218 INFORMAT 

IONAL 

Physical device %d on channel %d at 

disk array adapter in slot %d is now 

ONLINE (Server %s). 

219 MAJOR Controller cache write back error at disk 

array adapter in slot %d: %d bad blocks 

(Server %s). 

220 MAJOR Cache state-change table full at disk 

array adapter in slot %d (Server %s). 

221 CRITICAL Connection to disk array controller in slot 

%d on server %s lost. 

222 INFORMAT 

IONAL 

223 INFORMAT 

IONAL 

224 INFORMAT 

IONAL 

225 INFORMAT 

IONAL 



variable) 

Automatic rebuild of system drive %d 

was started at disk array adapter in slot 

%d at server %s. 

Manual rebuild of system drive %d was 

started at disk array adapter in slot %d at 

server %s. 

Rebuild of system drive %d was 

successfully completed at disk array 


Rebuild of system drive %d was 

cancelled at disk array adapter in slot %d 

at server %s. 

226 MAJOR Rebuild error on system drive %d at disk 

array adapter in slot %d at server %s. 

227 MAJOR Rebuild of system drive %d finished at 

disk array adapter in slot %d: new device 

failed at server %s. 

228 MAJOR Rebuild of system drive %d finished at 

disk array adapter in slot %d: system 

drive failed at server %s. 


Remarks 

13

14 


TRAP-TYPE/ 

Alarm type 

mylexInitializationStarted 

Initialization started 

mylexInitializationDone 

Initialization done 

mylexInitializationCanceled 

Initialization canceled 

mylexInitializationFailed 

Initialization failed 

mylexSystemDriveCreated 

System drive created 

mylexSystemDriveDeleted 

System drive deleted 

mylexRaidExpansionStarted 

RAID expansion started 

mylexRaidExpansionDone 

RAID expansion done 

mylexRaidExpansionFailed 

RAID expansion failed 

mylexSystemDriveBadBlock 

Bad block 

mylexSystemDriveSizeChang 

ed 

System drive size changed 

mylexRaidTypeChanged 

RAID type changed 

mylexPhysicalDeviceHotspare 

Physical device hotspare 

mylexPhysicalDeviceHardErr 

or 

Physical device hard error 

mylexPhysicalDeviceSoftErro 

r 

Physical device soft error 

mylexPhysicalDeviceParityEr 

ror 

Physical device parity error 

mylexPhysicalDeviceMiscErr 

or 

Physical device miscellaneous 

error 


Specific 

Level of 

importance 

229 INFORMAT 

IONAL 

230 INFORMAT 

IONAL 

231 INFORMAT 

IONAL 

Initialization of system drive %d started 

at disk array adapter in slot %d at server 

%s. 

Initialization of system drive %d 

successfully finished at disk array adapter 

in slot %d at server %s. 

Initialization of system drive %d 

canceled at disk array adapter in slot %d 

at server %s. 

232 MAJOR Initialization of system drive %d failed at 

disk array adapter in slot %d at server 

%s. 

233 INFORMAT 

IONAL 

234 INFORMAT 

IONAL 

235 INFORMAT 

IONAL 

236 INFORMAT 

IONAL 

New system drive %d created at disk 


System drive %d deleted at disk array 


RAID capacity expansion on system 

drive %d started at disk array adapter in 

slot %d at server %s. 

RAID capacity expansion on system 

drive %d successfully finished at disk 


237 MAJOR RAID capacity expansion failed on 

system drive %d at disk array adapter in 

slot %d at server %s. 

238 MINOR Bad block(s) detected on system drive 

%d at disk array adapter in slot %d at 

server %s. 

239 INFORMAT 

IONAL 

240 INFORMAT 

IONAL 

250 INFORMAT 

IONAL 



variable) 

Size of system drive %d was changed at 

disk array adapter in slot %d at server 

%s. 

RAID type of system drive %d was 

changed at disk array adapter in slot %d 

at server %s. 

Physical device %d on channel %d at 

disk array adapter in slot %d is now 

HOTSPARE (Server %s). 

251 MINOR Hard error occurred at physical device 

%d on channel %d at disk array adapter 

in slot %d (Server %s). 

252 MINOR Soft error occurred at physical device %d 

on channel %d at disk array adapter in 

slot %d (Server %s). 

253 MINOR Parity error occurred at physical device 

%d on channel %d at disk array adapter 

in slot %d (Server %s). 

254 MINOR Miscellaneous error occurred at physical 

device %d on channel %d at disk array 


Remarks

TRAP-TYPE/ 

Alarm type 

mylexPhysicalDevicePrefailur 

e 

Physical device prefailure 

mylexPhysicalDeviceUnconfi 

gured 

Physical device unconfigured 

mylexPhysicalDeviceAdded 

Physical device added 

mylexPhysicalDeviceRemove 

d 

Physical device removed 

mylexWriteBackError2 

Write back error 

mylexGamDriverMissing 

Missing GAM driver 

mylexGamDriverIncorrectVer 

sion 

Incorrect GAM driver version 

mylexSMARTFailurePredicte 

d 

SMART predicted disk failure 

mylexSMARTConfigurationC 

hanged 

SMART configuration 

changed 

mylexBBUFound 

BBU found 

mylexBBUPowerLow 

BBU power low 

mylexBBUPowerOK 

BBU power OK 


Specific 

Level of 

importance 

255 MAJOR Prefailure alert from physical device %d 

on channel %d at disk array adapter in 

slot %d (Server %s). Device will fail in 

near future! 

256 MAJOR Physical device %d on channel %d at 

disk array adapter in slot %d is 

unconfigured (Server %s). 


disk array adapter in slot %d was added 

(Server %s). 


disk array adapter in slot %d was 

removed (Server %s). 

260 MAJOR Controller cache write back error at disk 

array adapter in slot %d (Server %s). 

261 MINOR GAM driver is either not installed or has 

failed to start; required version: %s 

(server %s). 

262 MINOR Incorrect version of GAM driver installed 

(%s); required version: %s (server %s). 

270 CRITICAL SMART predicts failure for disk %d on 

channel %d at disk array adapter in slot 

%d (Server %s). 

271 INFORMAT 

IONAL 

275 INFORMAT 

IONAL 

SMART configuration has been changed 

for disk %d on channel %d at disk array 


A Battery Backup Unit was found on 

SCSI controller in slot %d (Server %s). 

276 CRITICAL The Battery Backup Unit power on SCSI 

controller in slot %d is low (Server %s). 

If this messages happens without power 

failure, replace the BBU. 

277 INFORMAT 

IONAL 



variable) 

The Battery Backup Unit power on SCSI 

controller in slot %d is OK (Server %s). 


Remarks 

15

16 


B.3 SNI-SERVER-CONTROL-MIB (sc.mib) 

Traps from the ServerView agent or RSB. 

TRAP-TYPE/ 

Alarm type 

testTrap 

Test trap 

fanError 

Fan failed 

tempOk 

Temperature normal 

tempWarn 

Temperature warning 

tempCritical 

Temperature critical 

trapOnBattery 

AC failed, on battery 

trapOnMains 

AC OK 

selftestWarning 

Controller selftest warning 

selftestError 

Controller selftest error 

table: SNI-SERVER-CONTROL-MIB Trap (ENTERPRISE : enterprises.231.2.10.2) 

Specific 

Level of 

importance 

600 INFORMAT 

IONAL 



variable) 

Test trap from server %s (no error). No error. 

601 CRITICAL Fan %d failed in cabinet %d of server 

%s. 

602 INFORMAT 

IONAL 

Temperature at sensor %d in cabinet %d 

of server %s is within normal range. 

603 MAJOR Temperature at sensor %d in cabinet %d 

of server %s has reached the warning 

level. 

604 CRITICAL Temperature at sensor %d in cabinet %d 

of server %s has reached the critical level. 

606 CRITICAL AC failure. Cabinet %d is running on 

battery power since %d seconds. In %d 

minutes server %s will shutdown. 

607 INFORMAT 

IONAL 

Mains returned after power failure in cabinet 

%d at server %s. 

608 MINOR The Server Management controller in 

cabinet %d has detected an minor 

problem during selftest of server %s. 

609 CRITICAL The Server Management controller in 

cabinet %d of server %s failed. 

Remarks 

A fan error occurred. 

Refer to "Contact 

Information" in 

"Read me First", and 

contact your 

maintenance 

engineer. 

The internal 

temperature of the 

server is within the 

normal range. No 

error. 

A device temperature 

error occurred. Check 

the room temperature. 

If room temperature is 

normal check whether 

the fan has failed. 

Other errors in 

hardware are possible. 


Information" in "Read 

me First", and contact 

your maintenance 

engineer. 

Running on UPS 

battery power. 

Check that UPS 

power cables are not 

unplugged and there 

has been no power 

interruption. 

Stopped running on 

the UPS battery. 

No problem. If 

multiple messages are 

detected, it is possible 

that the Server 

Management 

controller has failed. 




contact your 

maintenance 

engineer.

TRAP-TYPE/ 

Alarm type 

svCommunicationFailure 

Communication lost 

scbUnconfiguredUPSDetected 

UPS not configured 

scbUPSNotdetected 

UPS not detected 

scbUnconfiguredBBUDetected 

BBU not configured 

scbBBUNotdetected 

BBU not detected 

notEnoughCabinets 

SE's missing 

tooManyCabinets 

Too many SE's 

cabinetSwitchedOff 

Cabinet switched off 

cabinetSwitchedOn 

Cabinet switched on 

internalError 

Internal error 

serverShutdown 

Server shutdown 

610 MINOR Communication with the Server 

Management controller in cabinet %d of 

server %s lost. 

611 INFORMAT 

IONAL 



Specific 

Level of 

importance 

UPS detected by server %s, but no UPS 

is configured. 

612 MAJOR A UPS is configured but no UPS detected 

by server %s. 

613 INFORMAT 

IONAL 

614 INFORMAT 

IONAL 

BBU detected by server %s, but no BBU is 

configured. 

A BBU is configured but no BBU is 

detected by server %s. 

615 MAJOR The actual number of storage extensions 

at server %s is lower than the configured. 

616 MINOR The actual number of storage extensions 

at server %s is higher than the 

configured. 

617 INFORMAT 

IONAL 

618 INFORMAT 

IONAL 

620 INFORMAT 

IONAL 

621 INFORMAT 

IONAL 



variable) 

Cabinet %d was switched off because of 

%s (server %s). 

Cabinet %d was switched on because of 


Internal error #%d in server management 

controller software. (module %s at server 

%s). 

The reason %s causes a shutdown at 

server %s. 

Remarks 

If recovered in event 

ID:10636 there is no 

problem. 

If not restored, refer 

to "Contact 



contact your 

maintenance 

engineer. 

It is possible that 

there is an error in the 

settings. Recheck the 

settings. 

If there is no error in 

the settings it is 

possible that a UPS 

error occurred. Refer 

to "Contact 



contact your 

maintenance 

engineer. 

There is an error in 

the configuration of 

the external memory 

device. Recheck this. 

Server%s has turned 

off. 

Server%s has turned 

on. 

This is a software 

error. Specify the 

name of the module 

and, refer to "Contact 



contact your 

maintenance 

engineer. 

Shutdown at the 

server is performed 

by ordering 

shutdown. 

17

18 


TRAP-TYPE/ 

Alarm type 

fanCriticalError 

Fan will fail 

cabinetNotConfigured 

Cabinet not configured 

powerSupplyRemoved 

Power supply removed 

powerSupplyAdded 

Power supply added 

powerSupplyFailed 

Power supply failed 

powerSupplyOk 

Power supply OK 

powerSupplyStatusCritical 

Power supply critical 

fanOk 

Fan OK 

tempSensorBroken 

Temperature sensor broken 

serverManagementDisabled 

Server management disabled 


Specific 

Level of 

importance 

622 MAJOR Fan %d will fail in near future in cabinet 

%d of server %s. 

623 INFORMAT 

IONAL 

624 INFORMAT 

IONAL 

625 INFORMAT 

IONAL 

Cabinet %d at server %s is not 

configured. Depending on the system 

type, run Server Configuration Utility 

(SCU) or Storage Extension Manager 

(SEMAN) and configure the cabinet! 

Power supply %d in cabinet %d at server 

%s was removed. 


%s was added. 

626 MAJOR Power supply %d in cabinet %d at server 

%s failed. 

627 INFORMAT 

IONAL 


%s is working again. 

628 CRITICAL Insufficiant operating power supplies 

available in cabinet %d at server %s. 

629 INFORMAT 

IONAL 

Fan %d in cabinet %d of server %s is 

working again. 

630 MAJOR Temperature sensor %d in cabinet %d of 

server %s is broken or not connected. 

631 INFORMAT 

IONAL 



variable) 

Server management BIOS on server %s 

is disabled. Enable it to have full server 

management functionality! 

Remarks 

This predicts a fan 

error. A failure will 

not occur soon. 

"Contact 



contact your 

maintenance 

engineer. 

The cabinet is not 

correctly configured. 

Set again. 

The power supply 

unit was removed by 

the operator. 

The power supply 

unit was added by the 

operator. 

The PSU has failed. 




contact your 

maintenance 

engineer. 

This message appears 

after the power 

supply unit has been 

attached. 

Install the power 

supply unit. 

This message shows 

that the fan has 

returned to normal. 


when a fan is 

replaced. 

Temperature sensor 

may be faulty. 




contact your 

maintenance 

engineer. 

In order to enable the 

server management, 

perform settings 

using the 

maintenance tools 

attached to the 

hardware.

trapAcFail 

AC failed 

TRAP-TYPE/ 

Alarm type 

trapDuplicateCabinetId 

Duplicate cabinet ID 

trapEventLog 

Error in event log 

tempSensorOk 

Temperature sensor OK 

svCommunicationEstablished 

Communication established 

correctableMemErrorAddr 

Correctable memory error 

uncorrectableMemErrorAddr 

Uncorrectable memory error 



Specific 

Level of 

importance 

632 CRITICAL AC failure in cabinet %d of server %s. This message is stored 

when performing UPS 

scheduled operations. 

There is no problem in 

this case. 

When not performing 

UPS scheduled 

operations, there is a 

possibility of a power 

supply error. Refer to 

"Contact 



contact your 

maintenance 

engineer. 

633 MAJOR Two or more cabinets have the same ID 

%d on server %s. 

634 MAJOR An error was recorded on server %s. See 

server management event / error log 

(Recovery) for detailed information. 

635 INFORMAT 

IONAL 

636 INFORMAT 

IONAL 

637 INFORMAT 

IONAL 



variable) 

Temperature sensor %d in cabinet %d of 

server %s is working again. 

Communication with the Server 


server %s established again. 

Correctable memory error at address %d 

in cabinet %d of server %s. 

638 CRITICAL Uncorrectable memory error at address 

%d in cabinet %d of server %s. 

Remarks 


the system 

configuration. 

Set the configuration 

again. 

An error occurred 

during POST. 

Refer to the 

information stored in 

"Action" and "Error 

buffer" in 

ServerView. 


when the temperature 

sensor recovers. 


when communication 

with the Server 

Management 

controller has 

recovered. 

An SBE (memory 

single bit error) has 

occurred. 

There is no effect 

because of the 

existence of ECC 

memory. 

An MBE (memory 

multibit error) has 

occurred. 




contact your 

maintenance 

engineer. 

19

20 


TRAP-TYPE/ 

Alarm type 

correctableMemErrorBank 

Correctable memory error #1 

uncorrectableMemErrorBank 


#1 

correctableMemErrorModule 


uncorrectableMemErrorModul 

e 


#2 

correctableMemError 


uncorrectableMemError 


#3 

powerOffTimeReached 

Power off time reached 


Specific 

Level of 

importance 

639 INFORMAT 

IONAL 

Correctable memory error at bank %d in 

cabinet %d of server %s. 

640 CRITICAL Uncorrectable memory error at bank %d 


641 INFORMAT 

IONAL 

Correctable memory error at module %d 


642 CRITICAL Uncorrectable memory error at module 


643 INFORMAT 

IONAL 

Correctable memory error in cabinet %d 

of server %s. 

644 CRITICAL Uncorrectable memory error in cabinet 


645 INFORMAT 

IONAL 



variable) 

The power-off time is reached in cabinet 

%d on server %s! System shutdown in 

%d minutes. 

Remarks 


single bit) has 

occurred. 

This error has no 

effect as ECC 

memory is being 

used. 



occurred. 




contact your 

maintenance 

engineer. 



occurred. 


effect as ECC 


used. 



occurred. 




contact your 

maintenance 

engineer. 



occurred. 


effect as ECC 


used. 



occurred. 




contact your 

maintenance 

engineer. 

Shut down is 

performed due to an 

order by the 

ServerView console 

or a power off 

scheduled in 

ServerView.

TRAP-TYPE/ 

Alarm type 

frontDoorStatusChanged 

Front door status changed 

housingOpenStatusChanged 

Housing open status changed 

sniScRedundantFanFailed 

Redundant fan failed 

sniScRedundantPowerSupply 

Failed 

Redundant power supply 

failed 

sniScVoltageOk 

Voltage OK 

sniScVoltageTooLow 

Voltage too low 

sniScVoltageTooHigh 

Voltage too high 

sniScFanAdded 

Fan added 

sniScFanRemoved 

Fan removed 

646 INFORMAT 

IONAL 

647 INFORMAT 

IONAL 



Specific 

Level of 

importance 

The front door status of cabinet %d on 

server %s has changed. 

The housing open status of cabinet %d on 

server %s has changed. 

648 MAJOR The redundant fan %d failed in cabinet 

%d of server %s. System can become 

critical if another fan in this group fails. 

649 MAJOR Redundant power supply %d in cabinet 

%d at server %s failed. System can 

become critical if another power supply 

fails. 

650 INFORMAT 

IONAL 

Power supply voltage %d (%s) in cabinet 

%d at server %s is within normal range 

again. 

651 CRITICAL Power supply voltage %d (%s) in cabinet 

%d at server %s is too low. 


%d at server %s is too high. 

653 INFORMAT 

IONAL 

654 INFORMAT 

IONAL 



variable) 

The fan %d was added into cabinet %d of 

server %s. 

The fan %d was removed from cabinet 


Remarks 

The door has been 

opened or closed by 

the operator. 

The cover of the 

server has been 

opened or closed by 

the operator. 

A redundant fan 

failure has occurred. 




contact your 

maintenance 

engineer. 

A redundant power 

supply failure has 

occurred. 




contact your 

maintenance 

engineer. 

The server voltage 

has recovered. 

There is no problem. 

A problem may have 

occurred with the 

power supply unit, 

AC power supply or 

the base board etc. 




contact your 

maintenance 

engineer. 

A problem may have 

occurred with the 

power supply unit, 

AC power supply or 

the base board etc. 




contact your 

maintenance 

engineer. 

The fan was added by 

the operator. 

The fan was removed 

by the operator. 

21

22 


sniScShutdownCancelled 

Shutdown cancelled 

sniScCpuSpeedChanged 

CPU speed changed 

sieScPowerOn 

Power on 

sieScNoBootCpu 

No boot cpu 

sieScPostError 

Post error 

TRAP-TYPE/ 

Alarm type 

sieScSetupEntered 

Setup entered 

sieScBootError 

Boot error 

sieScBootWatchdogExpired 

Boot watchdog expired 

sieScSoftwareWatchdogExpir 

ed 

Software watchdog expired 

sieScUserAuthenticationFailur 

e 

User authentication failure 

sieScDiagnosticBoot 

Diagnostic boot 


Specific 

Level of 

importance 

655 INFORMAT 

IONAL 

656 INFORMAT 

IONAL 

657 INFORMAT 

IONAL 

658 INFORMAT 

IONAL 

659 INFORMAT 

IONAL 

660 INFORMAT 

IONAL 

661 INFORMAT 

IONAL 

662 INFORMAT 

IONAL 

663 INFORMAT 

IONAL 

Shutdown at server %s cancelled by the 

user. 

CPU speed at server %s changed to %d 

percent of its maximum speed. The CPU 

speed can be changed by the server 

management because of temperature 

problems. 

The reason %s causes a power on at 

server %s. 

System boot of the server %s failed, 

because no valid boot cpu available. 

The reason %s causes a power on at 

server %s. 

This is an operation. 

The speed of the CPU 

is lowered because of 

the high temperature 

of the CPU. 

Check CPU 

temperature. 

A broken fan may be 

causing the 

temperature of the 

CPU to rise. 


when the power 

supply is turned on. 

Check the system. 

A CPU error may 

have occurred. 

IF this occurs 

frequently, refer to 

"Contact 



contact your 

maintenance 

engineer. 

The bios setup is entered at server %s. Setup operations have 

been performed by 

the operator. 

No bootable operation system found at 

server %s. 

Check the system. 

Boot watchdog of server %s expired. Operations were 

performed for the 

amount of retry 

counters set. 

Set the retry counters 

again. 

Software watchdog of server %s expired. Operations were 



counters set. 


again. 

664 MAJOR User authentication failure detected at 

server %s, interface %d, performing 

protocol %s. 

665 INFORMAT 

IONAL 



variable) 

Server %s is performing a diagnostic 

boot. 

Remarks 

Check the 

authentication 

operations. 

Diagnostic operations 

are performed by the 

operator.

TRAP-TYPE/ 

Alarm type 

sieScBootRetryCountZero 

Boot retry counter zero 

sieScMessageLogFull 

Message log full 

memErrorModulePrefailure 

Memory module prefailure 

memErrorModuleFailing 

Memory module failing 

memErrorModuleReplaced 

Memory module replaced 

sniScPowerSupplyRedundanc 

yLost 

Power supply redundancy lost 

sieScMessageLogWarning 

Message log warning 

666 MAJOR Boot retry counter is zero on server %s. 

On next critical error shutdown the server 

will no longer try to reboot. System will 

run diagnostic system or switch off. 

667 MINOR The System Event Log on server %s in 

cabinet %d is full. No more messages can 

be logged. Please clear unneeded log 

entries as soon as possible! 

668 MAJOR Memory module failure is predicted for 

module %d in cabinet %d of server %s. 

669 MAJOR Memory module %d in cabinet %d of 

server %s is failing. Too many errors 

have occured. 



Specific 

Level of 

importance 



variable) 

670 MAJOR Memory module module %d in cabinet 

%d of server %s had failed 

and was replaced by a hot-spare module. 

671 MINOR Power supply redundancy in cabinet %d 

at server %s lost. System will become 

critical if a power supply fails. 

672 MINOR The System Event Log for cabinet %d at 

server %s has exceeded %d%% of its 

capacity. 

Remarks 

Operations were 



counters set. 


again. 

Clear the unnecessary 

System Event Log 

using the 



hardware. 

This predicts a 

memory error. 




contact your 

maintenance 

engineer. 

Warning predicting a 

memory error. 




contact your 

maintenance 

engineer. 

Memory error. 




contact your 

maintenance 

engineer. 

Power supply unit 

error. 




contact your 

maintenance 

engineer. 

This predicts a 

System Event Log. 

Clear the unnecessary 

System Event Log 

using the 



hardware. 

23

24 


TRAP-TYPE/ 

Alarm type 

sieScCpuPrefailure 

CPU prefailure 

sieScPowerFail 

Power failed 

sieScBiosSelftestError 

Critical BIOS selftest error 

sieScBiosSelftestWatchdogEx 

pired 

BIOS selftest watchdog 

expired 

sniScVoltageFailure 

Voltage out of range 

sniScBatteryVoltagePrefailure 

Battery failure predicted 


Specific 

Level of 

importance 



variable) 

673 MAJOR CPU failure is predicted for CPU %d in 


674 CRITICAL DC power failure in cabinet %d of server 

%s. 

675 CRITICAL A critical error happend while BIOS 

selftest in cabinet %d of server %s.See 

server management message log 

(recovery log) for detailed information. 

676 MAJOR BIOS selftest watchdog of server %s 

expired. 


%d at server %s is out of range. 

678 MAJOR Battery voltage %d (%s) in cabinet %d at 

server %s: Battery is predicted to fail in 

near future. 

Remarks 


CPU error. 

Contact your nearest 

maintenance 

engineer. 


error. 




contact your 

maintenance 

engineer. 

An error has been 

detected during BIOS 

selftest. 

For details refer to 

SEL and, refer to 

"Contact 



contact your 

maintenance 

engineer. 

An error has been 

detected during BIOS 

selftest. 

For details refer to 

SEL and, refer to 

"Contact 



contact your 

maintenance 

engineer. 


error. 




contact your 

maintenance 

engineer. 

This predicts a power 

supply unit error. 




contact your 

maintenance 

engineer.

B.4 SNI-SERVERVIEW-MIB (serverview.mib) 

ServerView console traps. 

TRAP-TYPE/ 

Alarm type 

sniSvGenericTrapForward 

ServerView alarm received 

sniSvPagerOff 

Pager turn off 

sniSvServerStateChanged 

Server changed state 

sniSvPassThroughTrapForwar 

d 

ServerView alarm passed 

through 

sieSvAlarmServiceCommand 

Alarm Service Command 

fscSvServerAdded 

Server added 

fscSvServerRemoved 

Server removed 

fscSvServerChanged 

Server changed 

fscSvServerStatusChanged 

Server status changed 

fscSvGroupAdded 

Group added 

fscSvGroupRemoved 

Group removed 

fscSvGroupChanged 

Group changed 

fscSvExploreServer 

Explore server 

fscAsTestMail 

Alarm Service Test Mail 

fscAsTestPager 

Alarm Service Test Pager 

fscAsStopTrapListenService 

Alarm Service Stop Trap 

Listen Service 

B.4 SNI-SERVERVIEW-MIB (serverview.mib) 

table: SNI-SERVERVIEW-MIB Trap (ENTERPRISE : enterprises.231.2.10.2) 

Specific 

Level of 

importance 

700 INFORMAT 

IONAL 

701 INFORMAT 

IONAL 

702 INFORMAT 

IONAL 

703 INFORMAT 

IONAL 

704 INFORMAT 

IONAL 

705 INFORMAT 

IONAL 

706 INFORMAT 

IONAL 

707 INFORMAT 

IONAL 

708 INFORMAT 

IONAL 

709 INFORMAT 

IONAL 

710 INFORMAT 

IONAL 

711 INFORMAT 

IONAL 

712 INFORMAT 

IONAL 

747 INFORMAT 

IONAL 

748 INFORMAT 

IONAL 

749 INFORMAT 

IONAL 



variable) 

The server %s sent the trap to 

ServerView application at station %s 

Pager number %d should be turned off. 

The server %s has changed its state to %s 

Remarks 

Trap sent from the 

alarm service. 

%s Trap sent from the 

alarm service. 

Command %d from server %s. 

Server %s was added. 

Server %s was removed. 

Server %s was changed. 

Server status %s was changed. 

Group (%s, %d) was added. 

Group (%s, %d) was removed. 

Group (%s, %d) was changed. 

Explore server %s. 

The Alarm Service on server %s sends a 

test mail. 

The Alarm Service on server %s tests a 

pager. 

The ServerView Alarm Service Trap 

Listen Service on server %s stops. 

25

26 


B.5 SNI-HD-MIB (hd.mib ) 

Traps from FSC HD SMARTMonitoring. 

TRAP-TYPE/ 

Alarm type 

sniSMARTFailurePredicted 

SMART predicted disk failure 

sniSMARTMonitoringDisable 

d 

SMART configuration 

changed 

table: SNI-HD-MIB Trap (ENTERPRISE : enterprises.231.2.10.2) 

Specific 

Level of 

importance 

B.6 SNI-NT-CLUSTER-MIB (ntcluster.mib) 

The next table shows SNI-NT-CLUSTER-MIB traps. 

TRAP-TYPE/ 

Alarm type 

sniWpChangeUnknown 

unknown notification type 

sniWpChangeClusterNotFoun 

dActive 

abnormal cluster status 

sniWpChangeClusterActiveA 

gain 

normal cluster status 

sniWpChangeClusterNoLonge 

rActive 

abnormal cluster status 

sniWpChangeNodeDeleted 

node deleted 

sniWpChangeNodeAdded 

node added 

sniWpChangeNodeState 

node state change 

sniWpChangeResourceTypeD 

eleted 

resource type deleted 



variable) 

750 CRITICAL SMART predicts failure on disk %d 

(%s), adapter %d (%s), on Server %s. 

751 INFORMAT 

IONAL 

SMART configuration has been changed 

on hard disk %d (%s), adapter %d (%s), 

on Server %s. 

table: SNI-NT-CLUSTER-MIB Trap (ENTERPRISE : enterprises.231) 

Specific 

Level of 

importance 

801 INFORMAT 

IONAL 



variable) 

The cluster has sent the unknown 

notification 0x%X. 

810 CRITICAL SNMP cannot access cluster software. 

Trap sent from server %s. 

811 INFORMAT 

IONAL 

SNMP gained access to the cluster 

software. Trap sent from server %s. 

812 CRITICAL SNMP lost access to the cluster software. 

Trap sent from server %s. 

830 INFORMAT 

IONAL 

831 INFORMAT 

IONAL 

The node %s has been deleted. ↑ 

The node %s has been added. ↑ 

832 MAJOR The node %s has changed its state. ↑ 

840 INFORMAT 

IONAL 

Resource type %s has been deleted. ↑ 

Remarks 


disk error. 




contact your 

maintenance 

engineer. 


when SMART mode 

has been changed. 

Remarks 

Trap from an 

unsupported 

application 

(ClusterView). 

Not displayed 

normally. 

↑ 

↑ 

↑

TRAP-TYPE/ 

Alarm type 

sniWpChangeResourceTypeA 

dded 

resource type created 

sniWpChangeGroupDeleted 

group deleted 

sniWpChangeGroupAdded 

group created 

sniWpChangeGroupState 

group state change 

sniWpChangeGroupProperty 

group properties change 

sniWpChangeResourceDeleted 

resource deleted 

sniWpChangeResourceAdded 

resource added 

sniWpChangeResourceState 

resource state change 

sniWpChangeResourcePropert 

y 

resource properties change 

sniWpChangeRegistryAttribut 

es 

cluster attributes change 

sniWpChangeRegistryKey 

registry namespace change 

sniWpChangeRegistryValue 

registry value change 

sniWpChangeNetworkDeleted 

network deleted 

sniWpChangeNetworkAdded 

network created 

sniWpChangeNetworkState 

network state change 

sniWpChangeNetworkPropert 

y 

network properties change 

sniWpChangeNetInterfaceDel 

eted 

network interface deleted 

sniWpChangeNetInterfaceAd 

ded 

network interface created 

sniWpChangeNetInterfaceStat 

e 

network interface state change 

sniWpChangeNetInterfacePro 

perty 

network interface properties 

change 

sniWpNodeUp 

Cluster node online 


Specific 

Level of 

importance 

841 INFORMAT 

IONAL 

850 INFORMAT 

IONAL 

851 INFORMAT 

IONAL 

B.6 SNI-NT-CLUSTER-MIB (ntcluster.mib) 

Resource type %s has been created. ↑ 

Group %s has been deleted. ↑ 

Group %s has been created. ↑ 

852 MAJOR Group %s has changed its state. ↑ 

853 INFORMAT 

IONAL 

860 INFORMAT 

IONAL 

861 INFORMAT 

IONAL 

The properties of group %s have 

changed. 

Resource %s has been deleted. ↑ 

Resource %s has been added. ↑ 

862 MAJOR Resource %s has changed its state. ↑ 

863 INFORMAT 

IONAL 

895 INFORMAT 

IONAL 

896 INFORMAT 

IONAL 

897 INFORMAT 

IONAL 

910 INFORMAT 

IONAL 

911 INFORMAT 

IONAL 

The properties of resource %s have 

changed. 

The attributes of registry key %s have 

been changed. 

Registry key %s has been created or 

deleted. 

A value of registry key %s has been 

changed. 

Network %s has been deleted. ↑ 

Network %s has been created. ↑ 

912 MAJOR Network %s has changed its state. ↑ 

913 INFORMAT 

IONAL 

920 INFORMAT 

IONAL 

921 INFORMAT 

IONAL 

The properties of Network %s have 

changed. 

Network interface %s has been deleted. ↑ 

Network interface %s has been created. ↑ 

922 MAJOR Network interface %s has changed its 

state. 

923 INFORMAT 

IONAL 

924 INFORMAT 

IONAL 



variable) 

The properties of network interface %s 

have changed. 

Cluster node %s is online. ↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

Remarks 

27

28 


TRAP-TYPE/ 

Alarm type 

sniWpNodeDown 

Cluster node offline 

sniWpNodePaused 

Cluster node paused 

sniWpNodeJoining 

Cluster node joining 

sniWpGroupOnline 

Cluster group online 

sniWpGroupPartialOnline 

Cluster group partially online 

sniWpGroupPending 

Cluster group pending 

sniWpGroupOffline 

Cluster group offline 

sniWpGroupFailed 

Cluster group failed 

sniWpResourceOnline 

Cluster resource online 

sniWpResourceOffline 

Cluster resource offline 

sniWpResourceFailed 

Cluster resource failed 

sniWpNetworkUp 

Network reactivated 

sniWpNetworkDown 

Cluster network down 

sniWpNetworkUnavailable 

Cluster network unavailable 

sniWpNetInterfaceUp 

Cluster network interface 

reactivated 

sniWpNetInterfaceFailed 


failed 

sniWpNetInterfaceUnreachable 


unreachable 

sniWpNetInterfaceUnavailable 


unavailable 


Specific 

Level of 

importance 

925 INFORMAT 

IONAL 

926 INFORMAT 

IONAL 

927 INFORMAT 

IONAL 

928 INFORMAT 

IONAL 

929 INFORMAT 

IONAL 

930 INFORMAT 

IONAL 

931 INFORMAT 

IONAL 

Cluster node %s is offline. ↑ 

Cluster node %s has been paused. ↑ 

Cluster node %s is joining. ↑ 

Cluster group %s is online. ↑ 

Cluster group %s is partially online. ↑ 

Cluster group %s is pending. ↑ 

Cluster group %s is offline. ↑ 

932 MAJOR Cluster group %s has failed. ↑ 

933 INFORMAT 

IONAL 

934 INFORMAT 

IONAL 

Cluster resource %s is online. ↑ 

Cluster resource %s is offline. ↑ 

935 MAJOR Cluster resource %s has failed. ↑ 

936 INFORMAT 

IONAL 

937 INFORMAT 

IONAL 

Cluster network %s reactivated. ↑ 

Cluster network %s down. ↑ 

938 MAJOR Cluster network %s unavailable. ↑ 

939 INFORMAT 

IONAL 



variable) 

Cluster network interface %s reactivated. ↑ 

940 MAJOR Cluster network interface %s has failed. ↑ 

941 MAJOR Cluster network interface %s unreachable. ↑ 

942 MAJOR Cluster network interface %s unavailable. ↑ 

Remarks

B.7 PCI-HOTPLUG-MIB (pcihotplug.mib) 

Traps from PCI HOTPLUG. 

TRAP-TYPE/ 

Alarm type 

siePciHotPlugTrapHotRemoval 

Start of HotPlug action 

siePciHotPlugTrapHotReplace 

Start of HotPlug action 

siePciHotPlugTrapEndHotPlu 

gAction 

End of HotPlug action 

sieDeviceHotPlugTrapHotRe 

moval 

Device HotPlug action 

sieDeviceHotPlugTrapHotRep 

lace 


sieDeviceHotPlugTrapHotAdd 


table: PCI-HOTPLUG-MIB Trap (ENTERPRISE : enterprises.231.2.10.2) 

Specific 

Level of 

importance 

1000 INFORMAT 

IONAL 

B.8 SERVERVIEW-STATUS-MIB (status.mib) 

Traps from the ServerView status agent. 

TRAP-TYPE/ 

Alarm type 

sieStTrapStatusChanged 

Status changed 

1001 INFORMAT 

IONAL 

B.9 SIEMENS-MULTIPATH-MIB (mp.mib) 

Traps from FSC MultiPath SNMP agent's. 

TRAP-TYPE/ 

Alarm type 

sieMPError 

MP: Last port failed 

1002 INFORMAT 

IONAL 

1020 INFORMAT 

IONAL 

1021 INFORMAT 

IONAL 

1022 INFORMAT 

IONAL 



variable) 

A Hot Removal action is started on 

physical slot %d (server %s). 

A Hot Replace action is started on 

physical slot %d (Server %s). 

The HotPlug action on physical slot %d 

is terminated %s (Server %s). The card 

state is : %s 

A SCSI device on SCSI adapter 

(PCI Bus Number %d, Device 

Number %d) has been removed (server 

%s). 



Number %d) has been replaced (server 

%s). 



Number %d) has been added (server %s). 

B.7 PCI-HOTPLUG-MIB (pcihotplug.mib) 

table: SERVERVIEW-STATUS-MIB Trap (ENTERPRISE : enterprises.231.2.10.2) 

Specific 

Level of 

importance 

1100 INFORMAT 

IONAL 



variable) 

Remarks 

Trap from an 

unsupported 

application 

(ClusterView). 

Not displayed 

normally. 

↑ 

↑ 

↑ 

↑ 

↑ 

Remarks 

System status has changed at server %s. Check the previous and 

subsequent Traps. 

table: SIEMENS-MULTIPATH-MIB Trap (ENTERPRISE : enterprises.231.2.10.2) 

Specific 

Level of 

importance 



variable) 

1200 CRITICAL MultiPath group %d on server %s is 

down. 

Remarks 

29

30 


TRAP-TYPE/ 

Alarm type 

sieMPRetry 

MP: Port failed 

sieMPActivePortChanged 

MP: Port activated 

sieMPReconfigured 

MP: Port added/removed 

sieMPStatusChanged 

MP: Behavior changed 

sieMPAutoRecovered 

MP: Port alive again 

sieMPErrorCleared 

MP: Status cleared 

1201 MAJOR Port %d of MultiPath group %d on server 

%s is down. Error on ID %d, Lun %d. 

1202 INFORMAT 

IONAL 

1203 INFORMAT 

IONAL 

1204 INFORMAT 

IONAL 

1205 INFORMAT 

IONAL 

1206 INFORMAT 

IONAL 

Active port for MultiPath group %d 

changed on server %s. Port %d is now 

active port. 

MultiPath group %d reconfigured on 

server %s. Port %d was affected. 

MultiPath behavior for group %d was 

changed on server %s. 

MultiPath group %d on server %s: Port 

%d recovered from error. 

MultiPath group %d on server %s: Error 

for MultiPath port %d was cleared. 

B.10 SERVERVIEW-DUPLEXDATAMANAGER-MIB 

(ddm.mib) 

Traps from DuplexDataManage. Refer to the S60 manual for details. 

table: SERVERVIEW-DUPLEXDATAMANAGER-MIB Trap (ENTERPRISE : enterprises.231.2.10.2) 

TRAP-TYPE/ 

Alarm type 

fscDdmNewConfig 

DDM: New DuplexWrite 

configuration 

fscDdmPieceRemoved 

DDM: DuplexWrite piece 

removed 

fscDdmConfigRemoved 

DDM: DuplexWrite 

configuration removed 

fscDdmStatusSet 

DDM: DuplexWrite status 

changed 

fscDdmUpdateStatus 

DDM: DuplexWrite status 

updated 

fscDdmPieceRecovered 


recovered 

fscDdmRecoverAborted 

DDM: Recover aborted 

fscDdmReservationConflict 

DDM: reservation conflict 

fscDdmConfigChanged 


configuration changed 

table: SIEMENS-MULTIPATH-MIB Trap (ENTERPRISE : enterprises.231.2.10.2) 

Specific 

Specific 

Level of 

importance 

Level of 

importance 

1400 INFORMAT 

IONAL 

1401 INFORMAT 

IONAL 

1402 INFORMAT 

IONAL 



variable) 

Configuration for DuplexWrite group 

%d/%d/%d/%d was created or updated 

on server %s. 

DuplexWrite piece %d/%d/%d/%d was 

removed from group on server %s. 

DuplexWrite group %d/%d/%d/%d was 

removed on server %s. 

1403 MINOR Status of DuplexWrite piece %d/%d/%d/ 

%d on server %s has changed (user 

request). 

1404 MINOR Status of DuplexWrite piece %d/%d/%d/ 

%d on server %s has changed (driver 

request). 

1405 INFORMAT 

IONAL 

DuplexWrite piece %d/%d/%d/%d 

successfully recovered on server %s. 

1406 MINOR DuplexWrite piece %d/%d/%d/%d 

aborted Recover process on server %s. 

1407 INFORMAT 

IONAL 

1408 INFORMAT 

IONAL 



variable) 

Reservation conflict occured on 

DuplexWrite group %d/%d/%d/%d on 

server %s - group is not accessible. 

DuplexWrite has found a new 

configuration on server %s. 

Remarks 

Remarks

fscDdmConfigInvalidated 


configuration invalidated 

fscDdmActiveLunChanged 

DDM: Active DuplexWrite 

piece changed 

fscDdmPieceFailed 


failed 

fscDdmRootFlagChanged 

DDM: RootDisk flag changed 

fscDdmForceActive 


forced active 

fscDdmNameChanged 

DDM: DuplexWrite name 

changed 

fscDdmPathFailed 

DDM: MultiPath path failed 

fscDdmRetry 

DDM: MultiPath path retried 

fscDdmActivePortChanged 

DDM: Active MultiPath path 

changed 

fscDdmReconfigured 

DDM: MultiPath reconfigured 

fscDdmStatusChanged 

DDM: MultiPath status 

changed 

fscDdmAutoRecovered 

DDM: MultiPath path 

AutoRecovered 

fscDdmErrorCleared 

DDM: MultiPath path error 

cleared 

fscDdmPnPRemove 

DDM: PnP Removal 

fscDdmPnPNew 

DDM: PnP Add 

fscDdmCluster 

DDM: Cluster configuration 

changed 

1409 INFORMAT 

IONAL 

1410 INFORMAT 

IONAL 

B.10 SERVERVIEW-DUPLEXDATAMANAGER-MIB (ddm.mib) 

table: SERVERVIEW-DUPLEXDATAMANAGER-MIB Trap (ENTERPRISE : enterprises.231.2.10.2) 

TRAP-TYPE/ 

Alarm type 

Specific 

Level of 

importance 

Configuration information was 

invalidated for DuplexWrite group %d/ 

%d/%d/%d on server %s. 

DuplexWrite piece %d/%d/%d/%d is 

used for read commands on server %s. 

1411 CRITICAL DuplexWrite piece %d/%d/%d/%d failed 

on server %s. 

1412 INFORMAT 

IONAL 

1413 INFORMAT 

IONAL 

1414 INFORMAT 

IONAL 

RootDisk flag changed on DuplexWrite 

group %d/%d/%d/%d on server %s. 

DuplexWrite piece %d/%d/%d/%d 

marked forced active on server %s 

(Snapshot). 

Name of DuplexWrite group %d/%d/%d/ 

%d has changed on server %s. 

1415 CRITICAL MultiPath path %d/%d/%d/%d failed on 

server %s. 

1416 MAJOR MultiPath path %d/%d/%d/%d failed on 

server %s - retry successful on other port. 

1417 INFORMAT 

IONAL 

1418 INFORMAT 

IONAL 

1419 INFORMAT 

IONAL 

1420 INFORMAT 

IONAL 

1421 INFORMAT 

IONAL 

1422 INFORMAT 

IONAL 

1423 INFORMAT 

IONAL 

1424 INFORMAT 

IONAL 



variable) 

MultiPath path %d/%d/%d/%d is active 

on server %s. 

MultiPath configuration changed on 

server %s. 

Status of MultiPath path %d/%d/%d/%d 

has changed on server %s. 

MultiPath path %d/%d/%d/%d 

automatically recovered on server %s. 

Error cleared on MultiPath path %d/%d/ 

%d/%d on server %s. 

Plug and Play Removal occured on 

server %s. 

Plug and Play Add occured on server %s. 

Cluster configuration changed on server 

%s. 

Remarks 

31

32 


B.11 FSC-SERVERCONTROL2-MIB (sc2.mib) 

sc2TrapTest 

Test trap 

Traps from the ServerView agent. 

table: FSC-SERVERCONTROL2-MIB Trap (ENTERPRISE : enterprises.231.2.10.2.2.10.20) 

TRAP-TYPE/ 

Alarm type 

sc2TrapCommunicationFailure 

Communication lost 

sc2TrapCommunicationEstablished 

Communication established 

sc2TrapControllerSelftestWarning 

Controller selftest warning 

sc2TrapControllerSelftestError 

Controller selftest error 

sc2TrapBiosSelftestError 

Critical BIOS selftest error 

sc2TrapFanAdded 

Fan added 

sc2TrapFanRemoved 

Fan removed 

sc2TrapFanOk 

Fan OK 

sc2TrapFanCritical 

Fan failure predicted 

sc2TrapFanFailed 

Fan failed 

sc2TrapRedundantFanFailed 

Redundant fan failed 

sc2TrapTempOk 


sc2TrapTempWarning 

Temperature warning 

sc2TrapTempCritical 


sc2TrapTempSensorOk 

Temperature sensor OK 

sc2TrapTempSensorBroken 

Temperature sensor broken 

sc2TrapPowerSupplyAdded 


sc2TrapPowerSupplyRemoved 


Specific 

Level of 

importance 

2000 INFORMAT 

IONAL 



variable) 

Test trap from server %s (no error). 

2001 MINOR Communication with the Server 


server %s lost. 

2002 INFORMAT 

IONAL 

Communication with the Server 


server %s established again. 

2003 MINOR The Server Management controller in 

cabinet %d has detected an minor 

problem during selftest of server %s. 

2004 CRITICAL The Server Management controller in 

cabinet %d of server %s failed. 

2005 CRITICAL A critical error happend while BIOS 

selftest in cabinet %d of server %s. See 

server management message log 

(recovery log) for detailed information. 

2010 INFORMAT 

IONAL 

2011 INFORMAT 

IONAL 

2012 INFORMAT 

IONAL 

Fan %s was added into cabinet %d of 

server %s. 

Fan %s was removed from cabinet %d of 

server %s. 

Fan %s in cabinet %d of server %s is 

working again. 

2013 MAJOR Fan %s will fail in near future in cabinet 


2014 CRITICAL Fan %s failed in cabinet %d of server %s. 

2015 MAJOR The redundant fan %s failed in cabinet 

%d of server %s. System can become 

critical if another fan in this group fails. 

2020 INFORMAT 

IONAL 

Temperature at sensor %s in cabinet %d 

of server %s is within normal range. 

2021 MAJOR Temperature at sensor %s in cabinet %d 

of server %s has reached the warning 

level. 

2022 CRITICAL Temperature at sensor %s in cabinet %d 

of server %s has reached the critical 

level. 

2023 INFORMAT 

IONAL 

Temperature sensor %s in cabinet %d of 

server %s is working again. 

2024 MAJOR Temperature sensor %s in cabinet %d of 

server %s is broken or not connected. 

2030 INFORMAT 

IONAL 

2031 INFORMAT 

IONAL 

Power supply %s in cabinet %d at server 

%s was added. 



Remarks

sc2TrapPowerSupplyOk 


sc2TrapPowerSupplyCritical 


sc2TrapPowerSupplyFailed 


sc2TrapRedundantPowerSupplyFailed 

Redundant power supply failed 

sc2TrapPowerSupplyRedundancyLost 

Power supply redundancy lost 

sc2TrapAcFail 

AC failed 

sc2TrapDcFail 

Power failed 

sc2TrapOnBattery 

AC failed, on battery 

sc2TrapOnMains 

AC OK 

sc2TrapVoltageOk 

Voltage OK 

2032 INFORMAT 

IONAL 

B.11 FSC-SERVERCONTROL2-MIB (sc2.mib) 


TRAP-TYPE/ 

Alarm type 

sc2TrapVoltageTooLow 

Voltage too low 

sc2TrapVoltageTooHigh 

Voltage too high 

sc2TrapVoltageFailed 

Voltage out of range 

sc2TrapBatteryVoltagePrefail 

Battery failure predicted 

sc2TrapCorrectableMemErrorAddr 


sc2TrapUncorrectableMemErrorAddr 


sc2TrapCorrectableMemErrorBank 


sc2TrapUncorrectableMemErrorBank 


sc2TrapCorrectableMemErrorModule 


sc2TrapUncorrectableMemErrorModule 


sc2TrapCorrectableMemError 


sc2TrapUncorrectableMemError 


Specific 

Level of 

importance 



2033 CRITICAL Insufficiant operating power supplies 

available in cabinet %d at server %s. 

2034 MAJOR Power supply %s in cabinet %d at server %s 

failed. 

2035 MAJOR Redundant power supply %s in cabinet 

%d at server %s failed. System can 

become critical if another power supply 

fails. 

2036 MINOR Power supply redundancy in cabinet %d 

at server %s lost. System will become 

critical if a power supply fails. 

2040 CRITICAL AC failure in cabinet %d of server %s. 

2041 CRITICAL DC power failure in cabinet %d of server 

%s. 

2042 CRITICAL AC failure. Cabinet %d is running on 

battery power since %d seconds. In %d 

minutes server %s will shutdown. 

2043 INFORMAT 

IONAL 

2050 INFORMAT 

IONAL 

Mains returned after power failure in 

cabinet %d at server %s. 

Power supply voltage %s in cabinet %d 

at server %s is within normal range 

again. 

2051 CRITICAL Power supply voltage %s in cabinet %d 

at server %s is too low. 


at server %s is too high. 


at server %s is out of range¥. 

2054 MAJOR Battery voltage %s in cabinet %d at 

server %s: Battery is predicted to fail in 

near future. 

2060 INFORMAT 

IONAL 

Correctable memory error at address %d 


2061 CRITICAL Uncorrectable memory error at address 


2062 INFORMAT 

IONAL 

Correctable memory error at bank %s in 


2063 CRITICAL Uncorrectable memory error at bank %s 


2064 INFORMAT 

IONAL 

Correctable memory error at module %s 


2065 CRITICAL Uncorrectable memory error at module 

%s in cabinet %d of server %s. 

2066 INFORMAT 

IONAL 



variable) 

Correctable memory error in cabinet %d 

of server %s. 

2067 CRITICAL Uncorrectable memory error in cabinet 


Remarks 

33

34 



TRAP-TYPE/ 

Alarm type 

sc2TrapMemErrorModulePrefail 

Memory module prefailure 

sc2TrapMemErrorModuleFailing 

Memory module failing 

sc2TrapMemErrorModuleReplaced 

Memory module replaced 

sc2TrapCpuSpeedChanged 

CPU speed changed 

sc2TrapCpuPrefail 

CPU prefailure 

sc2TrapCabinetSwitchedOff 

Cabinet switched off 

sc2TrapCabinetSwitchedOn 

Cabinet switched on 

sc2TrapPowerOffTimeReached 

Power off time reached 

sc2TrapServerShutdown 


sc2TrapShutdownCancelled 

Shutdown cancelled 

sc2TrapBootRetryCountZero 

Boot retry counter zero 

sc2TrapMessageLogFull 

Message log full 

sc2TrapMessageLogWarning 

Message log warning 

sc2TrapBootMessageLogEntry 

Error in message log 

sc2TrapIntrusionAssertion 

Front door or housing opened 

sc2TrapIntrusionDeassertion 

Front door or housing closed 

sc2TrapIntrusionChanged 

Front door or housing opened/closed 

Specific 

Level of 

importance 

2068 MAJOR Memory module failure is predicted for 

module %s in cabinet %d of server %s. 

2069 MAJOR Memory module %s in cabinet %d of 

server %s is failing. Too many errors 

have occured. 

2070 MAJOR Memory module module %s in cabinet 

%d of server %s had failed and was 

replaced by a hot-spare module 

2080 INFORMAT 

IONAL 

CPU speed at server %s changed to %d 

percent of its maximum speed. 

2081 MAJOR CPU failure is predicted for CPU %s in 


2090 INFORMAT 

IONAL 

2091 INFORMAT 

IONAL 

2092 INFORMAT 

IONAL 

2093 INFORMAT 

IONAL 

2094 INFORMAT 

IONAL 

Cabinet %d was switched off because of 


Cabinet %d was switched on because of 


The power-off time is reached in cabinet 

%d on server %s! System shutdown in 

%d minutes. 

The reason %s causes a shutdown at 

server %s. 

Shutdown at server %s cancelled by the 

user. 

2095 MAJOR Boot retry counter is zero on server %s. 

2100 MINOR The System Event Log on server %s in 

cabinet %d is full. No more messages can 

be logged! Please clear unneeded log 

entries as soon as possible! 

2101 MINOR The System Event Log for cabinet %d at 

server %s has exceeded %d%% of its 

capacity. 

2102 MAJOR An error was recorded on server %s 

before the management agents were 

started (boot phase). 

See server management message log 

(Recovery log) for detailed information. 

2110 MAJOR The front door or housing of cabinet %d 

was opened on server %s. 

2111 INFORMAT 

IONAL 



variable) 

The front door or housing of cabinet %d 

was closed on server %s. 

2112 MAJOR The front door or housing of cabinet %d 

was opened or closed on server %s. 

Remarks

B.12 BLADE-MIB (S31.mib) 

Traps from blade server (BX300/BX600). Refer to the blade server manual for details. 

TRAP-TYPE/ 

Alarm type 

s31TestTrap 

Test trap 

s31MgmtBladeAdded 

Management blade added 

s31MgmtBladeRemoved 

Management blade removed 

s31MgmtBladeOk 

Status of management blade is 

OK 

s31MgmtBladeError 


error 

s31MgmtBladeCriticalError 


critical 

s31ServerBladeAdded 

Server blade added 

s31ServerBladeRemoved 

Server blade removed 

s31ServerBladeOk 

Status of server blade is OK 

s31ServerBladeError 

Status of server blade is error 

s31ServerBladeCriticalError 

Status of server blade is 

critical 

s31SwitchBladeAdded 

Switch blade added 

s31SwitchBladeRemoved 

Switch blade removed 

s31SwitchBladeOk 

Status of switch blade is OK 

s31SwitchBladeError 

Status of switch blade is error 

s31SwitchBladeCriticalError 

Status of switch blade is 

critical 

s31SysFanAdded 

System fan added 

s31SysFanRemoved 

System fan removed 

s31SysFanOk 

Status of system fan is OK 

s31SysFanError 

Status of system fan is error 

s31SysFanCriticalError 

Status of system fan is critical 

table: BLADE-MIB Trap (ENTERPRISE : enterprises.7244.1.1.1) 

Specific 

Level of 

importance 

1600 INFORMAT 

IONAL 

1601 INFORMAT 

IONAL 

1602 INFORMAT 

IONAL 

1603 INFORMAT 

IONAL 



variable) 

Test trap from blade chassis %s (no 

error). 

Management blade %d at blade chassis 

%s was added. 




%s status is ok. 

1604 MAJOR Management blade %d at blade chassis 

%s status is error. 

1605 CRITICAL Management blade %d at blade chassis 

%s status is critical. 

1606 INFORMAT 

IONAL 

1607 INFORMAT 

IONAL 

1608 INFORMAT 

IONAL 

Server blade %d at blade chassis %s was 

added. 

Server blade %d at blade chassis %s was 

removed. 

Server blade %d at blade chassis %s 

status is OK. 

1609 MAJOR Server blade %d at blade chassis %s status 

is error. 

1610 CRITICAL Server blade %d at blade chassis %s 

status is critical. 

1611 INFORMAT 

IONAL 

1612 INFORMAT 

IONAL 

1613 INFORMAT 

IONAL 

Switch blade %d at blade chassis %s was 

added. 

Switch blade %d at blade chassis %s was 

removed. 

Switch blade %d at blade chassis %s 

status is OK. 

1614 MAJOR Switch blade %d at blade chassis %s 

status is error. 

1615 CRITICAL Switch blade %d at blade chassis %s 

status is critical. 

1616 INFORMAT 

IONAL 

1617 INFORMAT 

IONAL 

1618 INFORMAT 

IONAL 

System fan %d at blade chassis %s was 

added. 

System fan %d at blade chassis %s was 

removed. 

System fan %d at blade chassis %s status 

is OK. 

1619 MAJOR System fan %d at blade chassis %s status 

is error. 

1620 CRITICAL System fan %d at blade chassis %s status 

is critical. 


Remarks 

35

36 


TRAP-TYPE/ 

Alarm type 

s31SysTempOk 


s31SysTempError 

Temperature abnormal 

s31SysTempCriticalError 


s31SysTempSensorOk 

System temperature sensor 

OK 

s31SysTempSensorBroken 


broken 

s31SysPowerSupplyAdded 


s31SysPowerSupplyRemoved 


s31SysPowerSupplyOk 


s31SysPowerSupplyError 


s31SysPowerSupplyCriticalEr 

ror 


s31ServerPowerOn 

Power on 

s31ServerPostError 

Post error 

s31ServerBootError 

Boot error 

s31ServerShutdown 


s31ServerSoftwareWatchdogE 

xpired 

Software watchdog expired 

s31ServerBootWatchdogExpir 

ed 

Boot watchdog expired 

s31UserAuthenticationFailure 

User authentication failure 

s31TrapEventLog 

Error in event log 

s31ServerBladeNewAdd 

Server blade was added on a 

empty slot 


Specific 

Level of 

importance 

1621 INFORMAT 

IONAL 



variable) 

Temperature at system temperature sensor 

%d of blade chassis %s is within normal 

range. 

1622 MAJOR Temperature at system temperature 

sensor %d of blade chassis %s is out of 

normal range. 

1623 CRITICAL Temperature at system temperature 

sensor %d of blade chassis %s has 

reached the critical level. 

1624 INFORMAT 

IONAL 

System temperature sensor %d of blade 

chassis %s is working again. 

1625 MAJOR System temperature sensor %d of blade 

chassis %s is broken or not connected. 

1626 INFORMAT 

IONAL 

1627 INFORMAT 

IONAL 

1628 INFORMAT 

IONAL 

Power supply unit %d at blade chassis 

%s was added. 





1629 MAJOR Power supply unit %d at blade chassis 

%s failed. 

1630 CRITICAL Insufficiant operating power supplies unit 

available in power supply unit %d at 

blade chassis %s. 

1631 INFORMAT 

IONAL 

1632 INFORMAT 

IONAL 

1633 INFORMAT 

IONAL 

1634 INFORMAT 

IONAL 

1635 INFORMAT 

IONAL 

1636 INFORMAT 

IONAL 

Server blade %d at blade chassis %s is 

powered on. 


posted error. 

No bootable operation system found at 

server blade %d of blade chassis %s. 


shutdowned. 

Software watchdog at server blade %d of 

blade chassis %s expired. 

Boot watchdog at server blade %d of 

blade chassis %s expired. 

1637 MAJOR User authentication failure detected at 

blade chassis %s, performing protocol 

%s. 

1638 MAJOR An error was recorded on blade chassis 

%s. See server management event error 

log (Recovery) for detailed information. 

1639 INFORMAT 

IONAL 


added on a empty slot. 

Remarks

TRAP-TYPE/ 

Alarm type 

s31ServerBladeHotReplace 

Server blade was added on a 

marked for hot replacement 

slot 

s31ServerPowerOff 

Power off 

s31SysTempSensorAdded 


added 

s31SysTempSensorRemoved 


removed 

s31LivetimeError 

System live time has exceeded 

the limited count 

s31PowerOverBudget 

Server blade power on failed 

s31NicDetectionFail 

Nic detection failed 

s31SysPowerSupplyOvpFail 

Power supply OVP fail 

s31SysPowerSupplyOcpFail 

Power supply OCP fail 

s31FiberChannelAdded 

Fiber channel pass through 

card added 

s31FiberChannelRemoved 

Fiber channel pass through 

card removed 

s31SysPowerSupplyOverallSt 

atusOk 

System power supply overall 

status 


atusDegraded 


status 


atusCritical 


status 

s31SysFanOverallStatusOk 

System fan overall status 

s31SysFanOverallStatusDegra 

ded 


s31SysFanOverallStatusCritic 

al 



Specific 

Level of 

importance 

1640 INFORMAT 

IONAL 

1641 INFORMAT 

IONAL 

1642 INFORMAT 

IONAL 

1643 INFORMAT 

IONAL 

1644 INFORMAT 

IONAL 

1645 INFORMAT 

IONAL 

1646 INFORMAT 

IONAL 

1647 INFORMAT 

IONAL 

1648 INFORMAT 

IONAL 

1649 INFORMAT 

IONAL 

1650 INFORMAT 

IONAL 

1651 INFORMAT 

IONAL 

1652 INFORMAT 

IONAL 

1653 INFORMAT 

IONAL 

1654 INFORMAT 

IONAL 

1655 INFORMAT 

IONAL 

1656 INFORMAT 

IONAL 



variable) 


added on a marked for hot replacement 

slot. 


powered off. 


chassis %s is added. 


chassis %s is removed. 

Server %s live time has exceeded the 

limited count. 

Server blade %d at blade chassis %s 

power on failed because of over power 

budget. 


%s NIC detection failed. 

Power supply unit %d OVP fail. 

Power supply unit %d OCP fail. 

Fiber channel pass through card %d at 

blade chassis %s was added. 

Fiber channel pass through card %d at 

blade chassis %s was removed. 

System power supply overall status = OK 

System power supply overall status = 

degraded 

System power supply overall status = 

critical 

System fan overall status = OK 

System fan overall status = degraded 

system fan overall status = critical 


Remarks 

37

38 


TRAP-TYPE/ 

Alarm type 

s31SysTemperatureOverallSta 

tusOk 

System temperature overall 

status 


tusDegraded 


status 


tusCritical 


status 

1657 INFORMAT 

IONAL 

1658 INFORMAT 

IONAL 

1659 INFORMAT 

IONAL 

System temperature overall status = OK 

System temperature overall status = 

degraded 

System temperature overall status = 

critical 

B.13 AdaptecArrayController-MIB (aac.mib) 

Traps from blade server (PRIMERGY BX600) HostRAID Adaptec Array Controller. Refer to the blade 

server manual for details. 

TRAP-TYPE/ 

Alarm type 

aacDriveLetterChange 

A Drive Letter Changed 

aacFailoverChange 

A change in failover 

assignments occurred 

aacContainerStateChange 

A container changed its state 

aacFileSystemChange 

A file system change has 

occurred 

aacGeneralContainerFailure 

An unknown error occurred on 

container 

aacMirrorNotMirroring 

Container no longer mirroring 

aacMirrorFailureNoSpace 

Not enough failover space for 

mirror 

aacMirrorFailureNoUnmirror 

Container could not be 

unmirrored 

aacMirrorFailoverStarted 

Mirror failover started 

aacMirrorFailoverFailed 

Mirror failover failed 

aacMirrorNoFailoverAssigned 

No failover for mirror 


Specific 

table: AdaptecArrayController-MIB Trap (ENTERPRISE : enterprises.795.10.1.1) 

Specific 

Level of 

importance 

Level of 

importance 

1 INFORMAT 

IONAL 

2 INFORMAT 

IONAL 



variable) 

A Drive Letter Changed on controller %s 

for container %d. 

A change in failover assignments 

occurred on controller %s. 

3 MINOR A container changed its state on 

controller %s. Container : %d. 

4 INFORMAT 

IONAL 

A file system change has occurred on 

container %d on controller %s. 

6 MAJOR An unknown error occurred on container 

%d on adapter %s. 

7 MAJOR The container %d on controller %s is no 

longer in the mirroring state. 

8 CRITICAL A failover operation for controller %s 

container %d failed because there was 

not enough space available on the 

failover device. 

9 CRITICAL The container %d on controller %s could 

not be unmirrored. 

10 INFORMAT 

IONAL 



variable) 

A mirror failover operation started on 

controller %s for container %d. 

11 CRITICAL A failover operation on controller %s 

failed for container %d. 

12 MINOR There is no failover device assigned to 


Remarks 

Remarks

TRAP-TYPE/ 

Alarm type 

aacMirrorDriveFailure 

Mirror drive failure 

aacRaidRebuildStart 

Rebuild started 

aacRaidRebuildRestart 

Rebuild restarted 

aacRaidDriveFailure 

RAID Drive Failure 

aacRaidNoFailover 

No failover for RAID 

aacRaidNoSpace 

Not enough failover space for 

RAID 

aacSnapshotContainerAlmost 

Full 

Snapshot almost full 

aacSnapshotContainerFull 

Snapshot full 

aacRaidRebuildComplete 

Rebuild complete 

aacDeviceFailure 

Device failure 

aacControllerResume 

Controller resume 

aacInterfaceUp 

Interface up 

aacBatteryReconditionRequired 

Battery reconditioning 

required 

aacEnclosureGeneralError 

Enclosure general error 

aacEnclosureFanError 

Enclosure fan error 

aacEnclosurePowerSupplyError 

Enclosure power supply error 

aacEnclosureTempAbnormal 

Enclosure temperature 

abnormal 

aacEnclosureTempOver 

Enclosure temperature too 

high 

aacBatteryDead 

Battery dead 

aacBatteryImproving 

Battery improving 

aacBatteryDegrading 

Battery degrading 

aacBatteryGood 

Battery good 

13 CRITICAL A drive that was part of the mirror set 

(container) %d failed. This occurred on 

controller %d. 

14 INFORMAT 

IONAL 

15 INFORMAT 

IONAL 



Specific 

Level of 

importance 

A rebuild operation started on controller 

%s for container %d. 

A rebuild operation restarted on 

controller %s for container %d. 

16 CRITICAL A drive that was part of the RAID set 

(container) %d failed. This occurred on 

controller %s. 

17 MINOR There is no failover device assigned to 


18 CRITICAL A failover operation for controller %s 

container %d failed because there was 

not enough space available on the 

failover device. 

19 MAJOR The snapshot container %d on controller 

%s is almost full. 

20 CRITICAL The snapshot container %d on controller 

%s is full. 

21 INFORMAT 

IONAL 

The rebuild operation on controller %s 

for container %d has completed. 

22 CRITICAL A device has failed. Controller %s. Bus 

%d. ID %d LUN %d. 

23 INFORMAT 

IONAL 

24 INFORMAT 

IONAL 

The controller %s resumed normal I/O 

operations. 

The AAC management interface is up. 

25 MAJOR The controller %s requires battery 

reconditioning. 

26 MAJOR An enclosure connected to controller %s 

has reported an error. 


has reported a fan failure. 


has reported a power supply failure. 


has reported an abnormal temperature 

reading. 

30 CRITICAL An enclosure connected to controller %s 

has reported a temperature reading above 

the user threshold. 

31 CRITICAL The battery connected to controller %s is 

dead. 

32 INFORMAT 

IONAL 

The battery connected to controller %s is 

improving. 

33 MAJOR The battery connected to controller %s 

has lost charge. 

34 INFORMAT 

IONAL 



variable) 

The controller %s reports that its battery 

is good. 

Remarks 

39

40 


TRAP-TYPE/ 

Alarm type 

aacControllerPaused 

Controller paused 

aacContainerCreated 

Container created 

aacContainerDeleted 

Container deleted 

aacDeviceFailurePredictionTh 

resholdExceeded 

Device failure prediction 

threshold exceeded 

aacDeviceFailurePredictionTe 

st 

Device failure prediction test 

aacDeviceWarning 

Device warning 

aacDeviceTemperatureWarning 

Device temperature warning 

aacDeviceDegradedWarning 

Device degraded warning 

aacDeviceFailurePredictionCo 

nfigurationChanged 

Device failure prediction 

configuration changed 

aacGlobalHotSpareReplacedS 

uccess 

Failover Replaced 

aacDedicatedHotSpareReplac 

edSuccess 


aacGlobalHotSpareReplacedT 

ooSmall 



edTooSmall 



edArrayNotExist 


aacBatteryTemperatureWarning 

Battery Temperature Warning 

aacBatteryTemperatureCritical 

Battery Temperature Critical 

aacBatteryTemperatureCritical 

Recover 

Battery Temperature Critical 

Recover 


Specific 

Level of 

importance 

35 MINOR The controller %s has been paused. 

36 INFORMAT 

IONAL 

37 INFORMAT 

IONAL 

Container %d has been created on 


Container %d has been deleted on 


38 MAJOR A device reported that its Failure 

Prediction Threshold had been exceeded. 

Controller %s. Bus %d. ID %d LUN %d. 

39 INFORMAT 

IONAL 

A Failure Prediction Threshold test 

occurred. Controller %s. Bus %d. ID 

%d. LUN %d. 

40 MAJOR A Device issued a warning. Controller 

%s. Bus %d. ID %d LUN %d. 

41 MAJOR A Device issued a abnormal temperature 

warning. Controller %s. Bus %d. ID %d 

LUN %d. 

42 MINOR A device reported that its status is 

degraded. Controller %s. Bus %d. ID 

%d LUN %d. 

43 INFORMAT 

IONAL 

44 INFORMAT 

IONAL 

45 INFORMAT 

IONAL 

The failure prediction configuration 

changed for a device. Controller %s. Bus 

%d. ID %d LUN %d. 

A failover device has been replaced on 


A failover device has been replaced on 

container %d, controller %s. 

46 WARNING The failover device that was replaced on 

controller %s is too small. 

47 WARNING The failover device that was replaced on 

container %d, controller %s is too small. 

48 WARNING The failover device has been replaced on 

container %d, controller %s. However, 

container %d does not exist. 

49 WARNING The battery connected to controller %s 

has reported an over temperature 

warning. 

50 CRITICAL The battery connected to controller %s, 

has reported that it is critically over 

temperature. 

51 INFORMAT 

IONAL 



variable) 

The battery connected to controller %s, 

has reported that it has recovered from a 

critical over temperature. 

Remarks

TRAP-TYPE/ 

Alarm type 

aacBatteryTemperatureNormal 

Battery Temperature Warning 

Recover 

aacContainerMetadataUnkno 

wnError 

Container Metadata Unknown 

Error 

aacContainerMetadataReadErr 

or 

A metadata read error has 

occurred 

aacContainerMetadataCRCFai 

lureError 

Container Metadata CRC 

Failure Error 

aacContainerMiscompareError 

Container Miscompare Error 

aacSCSIBusReset 

There has been a SCSI bus 

reset 

aacSenseData 

Sense data event 

aacMediumError 

There has been a device 

medium error 

aacBadBlockRecoveryStarting 

The bad block recovery has 

started. 

aacBadBlockRecoveryComple 

ting 

The bad block recovery has 

completed 

aacInvalidIO 

An invalid I/O event has 

occurred 

aacDisablingChannel 

Disabling channel event 

aacCannotReadyDevice 

System can not ready the 

device 

aacChannelTimeout 

Channel Timeout 

aacSenseDataUnknown 

Sense data event 

aacCommandTimeout 

A command timeout has 

occurred 

52 INFORMAT 

IONAL 



Specific 

Level of 

importance 

The battery connected to controller %s, 

has returned to normal. 

53 CRITICAL Container %d has experienced an 

unknown metadata error on controller 

%s. 

54 CRITICAL A metadata read error has occurred. 


55 CRITICAL A metadata CRC faiure has occurred. 


56 CRITICAL Container %d has experienced 

miscompare error(s) on controller %s. 

57 INFORMAT 

IONAL 

58 INFORMAT 

IONAL 

There has been a SCSI bus reset. 

Controller %s. Bus %d. 

A sense data event has occurred. 


Key %s. ASC %s ASCQ %s. 

59 MAJOR There has been a device medium error. 


Begin LBA %s End LBA %s. 

60 INFORMAT 

IONAL 

61 INFORMAT 

IONAL 



variable) 

The bad block recovery has started. 


The bad block recovery has completed. 


62 MAJOR An invalid I/O event has occurred. 


Expected Bytes %d, Actual Bytes %d. 

63 MINOR A disabling channel event has occurred. 

Controller %s. Bus %d. Error Code %d 

64 MAJOR The system can not ready the device. 


65 MAJOR A channel timeout has occurred. 

Controller %s. Bus %d. 

66 MAJOR A sense data event has occurred. 


Key %s. ASC %s ASCQ %s. 

67 MAJOR A command timeout has occurred. 


OpCode %s. 

Remarks 

41

42 


TRAP-TYPE/ 

Alarm type 

aacContainerMediumErrorWa 

rning 

A medium error was 

encountered while rebuilding a 

container 

68 WARNING A medium error was encountered while 

rebuilding a container on Controller %s. 

Container %d. Block Number %s. 

B.14 DESKTRAP-MIB (desktrap.mib) 

The following table shows the DESKTRAP-MIB traps and their outline. 

Traps from DeskView Trap-Agent. 

TRAP-TYPE/ 

Alarm type 

sniTrapError 

No Text found in DeskMon.ini 

sniSmartOK 

SMART hard disk reports OK 

sniSmartWarning 

SMART hard disk reports 

Warning 

sniSmartError 

SMART hard disk reports 

Error. 

sniCoverClosed 

The cover is closed 

sniCoverOpened 

The cover has been opened. 

sniCoverSensorincorporated 

The sensor for securing the 

cover is incorporated. 

sniCoverSensorMissing 

The sensor for securing the 

cover is missing or defective 

sniCoverRecognition 

The cover type cannot be 

recognized. 

sniCoverRecognitionMissing 

The sensor for recognizing the 

cover type is missing or 

defective. 

sniNoShortCurcuit 

No short circuit in the mouse, 

keyboard or USB interface. 


Specific 

table: DESKTRAP-MIB Trap (ENTERPRISE : enterprises.231.2.10.3) 

Specific 

Level of 

importance 

Level of 

importance 



variable) 

Remarks 

1 MINOR No Text found in DeskMon.ini on %s Trap from an 

unsupported 

application 

(DeskView). 

Not displayed 

normally. 

1001 INFORMAT 

IONAL 

SMART hard disk reports OK on %s ↑ 

1002 MINOR SMART hard disk reports Warning on %s ↑ 

1003 CRITICAL SMART hard disk reports Error on %s ↑ 

2001 INFORMAT 

IONAL 

The cover is closed on %s ↑ 

2003 CRITICAL The cover has been opened on %s ↑ 

3001 INFORMAT 

IONAL 

The sensor for securing the cover is 

incorporated on %s 

3003 CRITICAL The sensor for securing the cover is 

missing or defective on %s 

4001 INFORMAT 

IONAL 

The cover type cannot be recognized on 

%s 

4003 CRITICAL The sensor for recognizing the cover type 

is missing or defective on %s 

5001 INFORMAT 

IONAL 



variable) 

No short circuit in the mouse, keyboard 

or USB interface on %s 

↑ 

↑ 

↑ 

↑ 

↑ 

Remarks

TRAP-TYPE/ 

Alarm type 

sniShortCurcuit 

Short circuit in the mouse, 

keyboard or USB interface. 

sniTemperatureOK 

The temperature sensor is 

functioning 

sniTemperatureWarning 

The temperature is high 

sniTemperatureCritical 

The temperature sensor is 

defective or the temperature is 

too high 

sniFanRunning 

The fan is running 

sniFanNotRunning 

The fan is not running 

sniFanWornOK 

The rotational speed of the fan 

is OK. 

sniFanWornWarning 


is almost critical. 

sniFanWornCritical 


is critical. 

sniVoltageOk 

The voltage monitor is 

functioning. 

sniVoltageWarning 

The voltage is almost critical. 

sniVoltageCritical 

The voltage monitor is not 

functioning or the voltage is 

critical. 

sniWatchdogOk 

The functionality of the 

operating system watchdog is 

guaranteed. 

sniWatchdogCritical 

The operating system 

watchdog caused too many 

consecutive system reboots 

and will be deactivated. 

sniInternalError 

Messages for system 

monitoring got lost because 

they could not be buffered!. 

The buffer has overrun or the 

harddisk was full. 

sniBIOSErrorLogOK 

BIOS error log contains no 

current entries 


Specific 

Level of 

importance 

5003 CRITICAL Short circuit in the mouse, keyboard or 

USB interface on %s 

7001 INFORMAT 

IONAL 

The temperature sensor is functioning on 

%s 

7002 MINOR The temperature is high on %s ↑ 

7003 CRITICAL The temperature sensor is defective or 

the temperature is too high on %s 

8001 INFORMAT 

IONAL 

The fan is running on %s ↑ 

8003 CRITICAL The fan is not running on %s ↑ 

9001 INFORMAT 

IONAL 

The rotational speed of the fan is OK on 

%s 

9002 MINOR The rotational speed of the fan is almost 

critical on %s 

9003 CRITICAL The rotational speed of the fan is critical 

on %s 

11001 INFORMAT 

IONAL 

The voltage monitor is functioning on %s ↑ 

11002 MINOR The voltage is almost critical on %s ↑ 

11003 CRITICAL The voltage monitor is not functioning or 

the voltage is critical on %s 


IONAL 

The functionality of the operating system 

watchdog is guaranteed on %s 

12003 CRITICAL The operating system watchdog caused 

too many consecutive system reboots and 

will be deactivated on %s 

13001 MINOR Messages for system monitoring got lost 

because they could not be buffered!. The 

buffer has overrun or the harddisk was 

full on %s. 


IONAL 



variable) 

BIOS error log contains no current 

entries on %s 


↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

Remarks 

43

44 


TRAP-TYPE/ 

Alarm type 

sniBIOSErrorLogWarning 

BIOS reported a non-critical 

problem 

sniBIOSErrorLogCritical 

BIOS reported a critical error 

sniAOLPOSTCritical 

Power On Self Test (POST) 

error. 

sniAOLWatchdogCritical 

The operating system may be 

hung or the computer failed to 

boot. 

sniAOLCoverOpened 

The cover was opened. 

sniAOLCPUMissingCritical 

The processor was removed 

from the computer. 

sniAOLHeartbeatCritical 

The computer is no longer 

available. (Presence Heartbeat 

Expired). 

sniFreeDiskSpaceOK 

Free hard disk space is 

sufficient. 

sniFreeDiskSpaceWarning 

Free hard disk space is low. 

sniFreeDiskSpaceError 

Free hard disk space is 

extremely low. 

sniMemoryChangesOK 

The memory size has not 

changed. 

sniMemoryChangesWarning 

The memory size increased. 

sniMemoryChangesError 

The memory size decreased. 

sniDeviceChangesOK 

No changes in devices. 

sniDeviceChangesWarning 

A device was added to the 

system. 

sniDeviceChangesError 

A device was removed from 

the system. 

sniAOLVoltage_Fan_Tempera 

tureCritical 

A Voltage/Fan/Temperature is 

operating out of specification. 

sniAOLLANLeashCritical 

The computer was recently 

reconnected to the network 


Specific 

Level of 

importance 

14002 MINOR BIOS reported a non-critical problem on 

%s 

14003 CRITICAL BIOS reported a critical error on %s ↑ 

15003 CRITICAL Power On Self Test (POST) error on %s ↑ 

16003 CRITICAL The operating system may be hung or the 

computer failed to boot on %s 

17003 CRITICAL The cover was opened on %s ↑ 

18003 CRITICAL The processor was removed from the 

computer %s 

20003 CRITICAL The computer %s is no longer available. 

(Presence Heartbeat Expired) 


IONAL 

Free hard disk space is sufficient on %s. ↑ 

21002 MINOR Free hard disk space is low on %s. ↑ 

21003 CRITICAL Free hard disk space is extremely low on 

%s. 


IONAL 

The memory size has not changed on %s. ↑ 

22002 MINOR The memory size increased on %s. ↑ 

22003 CRITICAL The memory size decreased on %s. ↑ 


IONAL 



variable) 

No changes in devices on %s. ↑ 

23002 MINOR A device was added to system %s. ↑ 

23003 CRITICAL A device was removed from system %s. ↑ 

24003 CRITICAL A Voltage/Fan/Temperature is operating 

out of specification on %s 

25003 CRITICAL The computer was recently reconnected 

to the network on %s 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

Remarks

TRAP-TYPE/ 

Alarm type 

sniAOLProcessorTemperature 

Critical 

The processor temperature is 

out of specification. 

sniAOLProcessor0MissingCri 

tical 

The processor P0 was 

removed from the computer. 

sniAOLProcessor1MissingCri 

tical 

The processor P1 was 

removed from the computer. 

sniAOLVoltage_FanCritical 

A Voltage/Fan is operating out 

of specification. 

sniAOLVoltageCritical 

A Voltage is operating out of 

specification. 

sniAOLFanCritical 

A Fan is operating out of 


sniAOLFan_TemperatureCriti 

cal 

A Fan/Temperature is 


sniAOLVoltage_Temperature 

Critical 

A Voltage/Temperature is 


sniAOLNICSMBusSlotCritical 

NIC with Capelookout has 

been plugged into a PCI slot 

without SMBus connection. 

sniAOLPresencePongCritical 

Received a presence pong 

reply. 

sniAOLHardwareMonitorCriti 

cal 

Hardware Monitor has 

detected an external event. 

sniAOL1_5VGTLVoltageCriti 

cal 

+1.5 GTL Voltage is out of 


sniAOLCPUCoreVoltageCriti 

cal 

CPU Core Voltage is out of 


sniAOL3_3VStandbyCritical 

+3.3V Standby Voltage is out 

of specification. 


Specific 

Level of 

importance 



variable) 

26003 CRITICAL The processor temperature is out of 

specification on %s 

28003 CRITICAL The processor P0 was removed from the 

computer on %s 

29003 CRITICAL The processor P1 was removed from the 

computer on %s 

30003 CRITICAL A Voltage/Fan is operating out of 


31003 CRITICAL A Voltage is operating out of 


32003 CRITICAL A Fan is operating out of specification on 

%s 

33003 CRITICAL A Fan/Temperature is operating out of 


34003 CRITICAL A Voltage/Temperature is operating out 

of specification on %s 

35003 CRITICAL NIC with Capelookout has been plugged 

into a PCI slot without SMBus 

connection on %s 

36003 CRITICAL Received a presence pong reply on %s ↑ 

37003 CRITICAL Hardware Monitor has detected an 

external event on %s 

38003 CRITICAL +1.5 GTL Voltage is out of specification 

on %s 

39003 CRITICAL CPU Core Voltage is out of specification 

on %s 

40003 CRITICAL +3.3V Standby Voltage is out of 



↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

Remarks 

45

46 


TRAP-TYPE/ 

Alarm type 

sniAOL5VoltageCritical 

+5V Voltage is out of 


sniAOLHardwareMonitorInter 

nalTemperatureCritical 

Hardware Monitor Internal 

Temperature is out of 


sniAOLCPUDiodeSensorCriti 

cal 

CPU Diode Sensor is 


sniAOLCPUFanCritical 

CPU Fan is operating out of 


sniAOLChassisFanCritical 

Chassis Fan is operating out of 


sniAOL12VoltageCritical 

+12V is operating out of 


sniAOL3_3VoltageCritical 

+3.3V is operating out of 


sniAOLCPUDiodeCritical 

Open/Short has occurred in the 

CPU Diode Sensor. 

sniAOL2_5VoltageCritical 

+2.5V is operating out of 


sniAOLAmbientTemperature 

Critical 

Ambient temperature is out of 


sniAOLRemoteTemperatureC 

ritical 

Remote Temperature is out of 


sniAOLUndockEventCritical 

Surprised undock event (no 

information is available). 

sniFreeSystemDiskSpaceOK 

Free hard disk space on system 

disk is sufficient. 

sniFreeSystemDiskSpaceWarn 

ing 


disk is low. 

sniFreeSystemDiskSpaceError 


disk is extremely low. 


Specific 

Level of 

importance 

41003 CRITICAL +5V Voltage is out of specification on %s ↑ 

42003 CRITICAL Hardware Monitor Internal Temperature 

is out of specification on %s 

43003 CRITICAL CPU Diode Sensor is operating out of 


44003 CRITICAL CPU Fan is operating out of specification 

on %s 

45003 CRITICAL Chassis Fan is operating out of 


46003 CRITICAL +12V is operating out of specification on 

%s 

47003 CRITICAL +3.3V is operating out of specification on 

%s 

48003 CRITICAL Open/Short has occurred in the CPU 

Diode Sensor on %s 

49003 CRITICAL +2.5V is operating out of specification on 

%s 

50003 CRITICAL Ambient temperature is out of 


51003 CRITICAL Remote Temperature is out of 


52003 CRITICAL Surprised undock event (no information 

is available) on %s 


IONAL 



variable) 

Free hard disk space on system disk is 

sufficient on %s. 

56002 MINOR Free hard disk space on system disk is 

low on %s. 

56003 CRITICAL Free hard disk space on system disk is 

extremely low on %s. 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

Remarks

TRAP-TYPE/ 

Alarm type 

sniLeaseExpirationOK 

The lease contract has not yet 

expired or no expiration date 

has been set. 

sniLeaseExpirationWarning 

The lease contract will expire 

soon. 

sniLeaseExpirationError 

The lease contract has expired. 

sniProcessorChangeOK 

No processor change 

determined. 

sniProcessorChangeWarning 

A processor has also been 

installed or replaced. 

sniProcessorChangeError 

A processor has been 

removed. 


IONAL 

B.15 DPT-SCSI-MIB (dptscsi.mib) 

The lease contract has not yet expired or 

no expiration date has been set on %s. 

57002 MINOR The lease contract will expire soon on 

%s. 

57003 CRITICAL The lease contract has expired on %s. ↑ 


IONAL 

No processor change determined on %s. 

58002 MINOR A processor has also been installed or 

replaced on %s. 

58003 CRITICAL A processor has been removed on %s. 

B.15 DPT-SCSI-MIB (dptscsi.mib) 

Traps from Adaptec's I2O-based RAID Card. Refer to the RAID controller manual for details. 

TRAP-TYPE/ 

Alarm type 

dptHbaTemperatureVeryHigh 

Trap 

Very high temperature on 

controller 

dptArrayStatusChangeFailedT 

rap 

Array failed 

dptHbaVoltageChangeTrap 

5V Voltage outside range on 

controller 

dptHbaTemperatureHighTrap 

High temperature on controller 

dptHbaEccRAMErrorUncorre 

ctableTrap 

Controller detected an ECC 

RAM error that could not be 

corrected 

dptArrayStatusChangeDegrad 

edTrap 

Array degraded 

dptDevReqSenseSeriousError 

Trap 

Serious: Request sense data 

received. 


Specific 

table: ADAPTECDURALINK-MIB Trap (ENTERPRISE : enterprises.1597) 

Specific 

Level of 

importance 

Level of 

importance 



variable) 



variable) 

400 CRITICAL Very high temperature on controller %d 

401 CRITICAL Array failed on Controller %d Bus %d ID 

%d LUN %d. 

300 MAJOR 5V Voltage status is now %d on 

controller %d 

301 MINOR High temperature on controller %d 

302 MAJOR Uncorrectable ECC error found on 

controller %d 

303 MAJOR Array on Controller %d Bus %d ID %d 

LUN %d running degraded. 

304 MAJOR Serious: Request sense data for controller 

%d Bus %d ID %d LUN %d. 

↑ 

↑ 

Remarks 

Remarks 

47

48 


TRAP-TYPE/ 

Alarm type 

dptDevArrayDataInconsistenc 

yTrap 

Array data inconsistency 

found. 

dptHbaErrorTrap 

controller error found. 

dptDevFailedTrap 

Unprotected drive has failed. 

dptDevSmartFailedTrap 

SMART failure reported. 

dptHbaAuxVoltageChangeTrap 

Auxiliary voltage outside 

range on controller 

dptHbaVoltageChange2Trap 

5V Voltage outside range on 

controller 

dptHbaAuxVoltageChange2Tr 

ap 

Auxiliary voltage outside 

range on controller 

dptHbaEccRAMErrorCorrecte 

dTrap 

ECC RAM Error detected and 

corrected. 

dptDevBlockReassignedTrap 

Disk block was reassigned 

dptDevReqSenseErrorTrap 

Warning: request sense data 

received. 

dptHbaVoltageNormalTrap 

Normal 5V voltage on 

controller 

dptHbaTemperatureNormalTr 

ap 

Normal temperature on 

controller 

dptHbaEccRAMErrorNotFou 

ndTrap 

ECC RAM Error detected but 

not found on correction. 

dptDevStatusChangedTrap 

Device status change 

dptDevReqSenseTrap 

Request sense received from 

controller. 

dptArrayChangeTrap 

Array change. 

dptBatteryChangeTrap 

Battery status change. 

dptHbaAuxVoltageNormalTrap 

Normal auxiliary voltage on 

controller 


Specific 

Level of 

importance 

305 MAJOR Array Data Inconsistency: Controller %d 

Bus %d ID %d LUN %d. 

306 MAJOR controller %d reported a non-SCSI related 

error. 

307 MAJOR Drive failure on controller %d Bus %d 

ID %d LUN %d. 

308 MAJOR SMART failure on controller %d Bus %d 

ID %d LUN %d reported. 

309 MAJOR An auxiliary voltage status is now %d on 

controller %d 

310 MAJOR 5V Voltage status is now %s on controller 

%d 

311 MAJOR An auxiliary voltage status is now %s on 

controller %d 

200 MINOR Correctable ECC RAM Error detected on 

controller %d 

201 MINOR Block %d reassigned: Controller %d Bus 

%d ID %d LUN %d 

202 MINOR Warning: Request sense data for 

controller %d Bus %d ID %d LUN %d. 

100 INFORMAT 

IONAL 

101 INFORMAT 

IONAL 

102 INFORMAT 

IONAL 

103 INFORMAT 

IONAL 

104 INFORMAT 

IONAL 

105 INFORMAT 

IONAL 

106 INFORMAT 

IONAL 

107 INFORMAT 

IONAL 



variable) 

Normal 5V voltage restored on controller 

%d 

Normal temperature restored on 

controller %d 

ECC RAM Error detected at %d on 

controller %d, but not found. 

Device status on Controller %d Bus %d ID 

%d LUN %d : %d. 

Request sense data for controller %d Bus 

%d ID %d LUN %d. 

Array change on controller %d Bus %d 

ID %d LUN %d. 

Battery status is now %d on controller 

%d. 

Normal auxiliary voltage restored on 

controller %d 

Remarks

TRAP-TYPE/ 

Alarm type 

dptHbaNoSparesTrap 

No hot spares detected on 

controller 

dptDevStatusChanged2Trap 

Device status change 

dptBatteryChange2Trap 

Battery status change. 

dptOtherTrap 

Controller generated an event 

108 INFORMAT 

IONAL 

109 INFORMAT 

IONAL 

110 INFORMAT 

IONAL 

14 INFORMAT 

IONAL 

No available hot spares were detected 

during a scan on controller %d 

B.16 MYLEXRAID-MIB (Mlxraid.mib) 

Device status on Controller %d Bus %d 

ID %d LUN %d : %s. 

Battery status is now %s on controller 

%d. 

Controller generated event: %s 

B.16 MYLEXRAID-MIB (Mlxraid.mib) 



B.17 MYLEXRAID-FJ-MIB (Mlxraidfj.mib) 



B.18 FASTTRAK-MIB (promisev1.mib) 

Traps from Promise IDE RAID Adapter. Refer to the RAID controller(RAID 

Manager(FastCheckMonitor)) manual for details. 

TRAP-TYPE/ 

Alarm type 

trpUnknown 

Unknown - possibly new 

driver error code 

trpEccError 

ECC Error on Disk 

LBA 

trpDiskDown 

Disk Down 

trpDiskOffline 

Disk Offline 

trpDiskPlugin 

Disk Plugin 

trpAryBadSector 

Array had BadSector 

at LBA 


Specific 

table: FASTTRAK-MIB Trap (ENTERPRISE : enterprises.7933.2.12) 

Specific 

Level of 

importance 

Level of 

importance 

1 INFORMAT 

IONAL 



variable) 

Unknown 

2 CRITICAL ECC Error on Disk 

3 MAJOR Disk Set Down by Driver 

4 MAJOR Disk %d of array %d set offline by driver. 

Description: %d 

5 MINOR New Disk Plugged In 

6 INFORMAT 

IONAL 



variable) 

Bad sector encountered 

Remarks 

Remarks 

49

50 


TRAP-TYPE/ 

Alarm type 

trpRebuildStart 

Rebuild Started Array 

disk 

trpSyncStart 

Synchronization Started, 

Array 

trpRetryDisk 

Retry Disk Task, disk 

lba 

trpArrayOffline 

Array Offline 

trpArrayCritical 

Array Critical 

trpArrayRebuildComplete 

Rebuild Completed, Array 

, disk 

trpArraySyncComplete 

Sync Completed, array 

 

trpMediaError 

Array , disk 

has Media Error at LBA 

, cmd=, 

status= 

trpReserveSectorError 

Reserved Sector Error, Disk 

lba 

trpRebuildAborted 

Rebuild Aborted, Array 

, disk , percent 

 

trpSyncAborted 

Synchronization Aborted, 

array , percent 

 

trpECCFixFail 

ECC Fix Failed 

trpSyncCompError 

Sync Compare Error, Array 

, LBA= 

trpSwapBoxPowerDown 

Swap Box Power Down, 

channel , msl 

trpSwapBoxPowerUp 

Swap Box Power Up, channel 

, msl 

trpSwapBoxBadSwap 

Swap Box, Bad Swap, channel 

, msl 

trpSwapBoxOverTemp 

Swap Box, Over Temp, 

channel , msl , 

Temp , C 


Specific 

Level of 

importance 

7 INFORMAT 

IONAL 

8 INFORMAT 

IONAL 


Synchronization Started 

9 MINOR Retry Disk Task 

10 MAJOR Array Offline 

11 CRITICAL Array Critical 

12 INFORMAT 

IONAL 

13 INFORMAT 

IONAL 

Rebuild Completed 

Synchronization Completed 

14 CRITICAL Media Error on Disk 

15 MINOR Reserved Sector Error 

16 CRITICAL Rebuild Aborted 

17 CRITICAL Sync. Aborted 

18 CRITICAL ECC Fix Failed 

19 MINOR Sync. Compare Error 

20 INFORMAT 

IONAL 

21 INFORMAT 

IONAL 



variable) 

Swap Box Power Down 

Swap Box Power Up 

22 MINOR Swap Box, Bad Swap 

23 MINOR Swap Box Over Temp 

Remarks

TRAP-TYPE/ 

Alarm type 

trpSwapBoxFanStopped 

Swap Box Fan Stop, channel 

, msl , RPM= 

 

trpSwapBox12VOutOfRange 

Swap Box, 12V Out of Range, 


12V= 


Swap Box, 5V Out of Range, 


5V= 


Specific 

Level of 

importance 

24 MINOR Swap Box Fan Stop 

25 MINOR 12V Out of Range 

26 MINOR 5V Out of Range 



variable) 

B.18 FASTTRAK-MIB (promisev1.mib) 

Remarks 

51

52 


B.19 PROMISE-UNIFIED-MIB (promiseraid.mib) 

Traps from Promise FastTrak SATA RAID Adapter. For message details, refer to the RAID controller 

(RAID Manager (PAM: Promise Array Management)) manual. 

TRAP-TYPE/ 

Alarm type 

trpDiskOffline 

Disk offline 

trpDiskPlugin 

New disk plugged in 

trpDiskMediaError 

Media error on disk 

trpDiskSMARTFail 

SMART error on disk 

trpDiskAccessRetry 

Disk retry 

trpDiskECCError 

Disk ECC Error 

trpDiskTimeOut 

Disk timed out 

trpDiskBadSector 

Bad sector on array 

trpArrayMediaError 

Array Media Error 

trpArrayOffline 

Array offline 

trpArrayCritical 

Array critical 

trpArrayCreate 

Array creation 

trpArrayDelete 

Array deletion 

trpArrayRebuildStart 


trpArrayAutoRebuildStart 


trpArrayRebuildAborted 

Rebuild aborted on array 

trpArrayRebuildPaused 

Rebuild paused on array 

trpArrayRebuildResumed 

Rebuild resumed on array 

trpArrayRebuildCompleted 

Rebuild successfully 

completed 

trpArrayRebuildFailed 

Rebuild failed 

trpArraySyncStarted 

Synchronization started on 

array 

table: PROMISE-UNIFIED-MIB Trap (ENTERPRISE : enterprises.7933.2.12) 

Specific 

Level of 

importance 

1 CRITICAL Disk Offline: %s 

2 INFORMAT 

IONAL 



variable) 

New Disk Plugged In: %s 

3 MAJOR Disk Media Error: %s 

4 MAJOR Disk SMART Fail: %s 

5 INFORMAT 

IONAL 

Retry Disk Access: %s 

6 MAJOR ECC Error on Disk: %s 

7 MAJOR Disk Time Out: %s 

8 CRITICAL Bad sector encountered on array:%s 

9 CRITICAL Array has a read/write error: %s 

10 CRITICAL Array offline: %s 

11 MAJOR Array critical: %s 

12 INFORMAT 

IONAL 

Create array: %s 

13 MAJOR Delete array: %s 

14 INFORMAT 

IONAL 

15 INFORMAT 

IONAL 

Rebuild started on array: %s 

Automatic Rebuild started on array: %s 

16 MAJOR Rebuild aborted on array: %s 

17 MAJOR Rebuild paused on array: %s 

18 INFORMAT 

IONAL 

19 INFORMAT 

IONAL 

20 INFORMAT 

IONAL 

21 INFORMAT 

IONAL 

Rebuild resumed on array: %s 

Rebuild completed on array: %s 

Rebuild failed on array: %s 

Synchronization started on array: %s 

Remarks

TRAP-TYPE/ 

Alarm type 

trpArraySyncAborted 

Synchronization aborted on 

array 

trpArraySyncPaused 

Synchronization paused on 

array 

trpArraySyncResumed 

Synchronization resumed on 

array 

trpArraySyncCompleted 

Synchronization successfully 

completed on array 

trpArraySyncFailed 

Synchronization failed on 

array 

trpSyncComparisonError 

Synchronization comparison 

error on array 

trpSwapBoxOverTemp 

Temperature is too high for 

enclosure 

trpSwapBoxFanStop 

Fan stopped for enclosure 


5V over/under threshold for 

enclosure 


12V over/under threshold for 

enclosure 

trpSwapBoxPowerUp 

Enclosure power on 

trpSwapBoxPowerDown 

Enclosure power off 

trpUnknown 

Unknown - possibly new 

driver error code 

trpBatteryTempOutOfRange 

Battery Temperature Out of 

Range 

trpBatteryUnstableTemp 

Battery Temperature Unstable 

trpBatteryVoltOfRange 

Battery Voltage Out of Range 

trpBatteryUnstableVolt 

Battery Voltage Unstable 

trpBatteryCommError 

Battery Communication Error 

trpBatteryBecomeNormal 

Battery Communication Error 

trpWriteModeChange 

Write Mode Change/Toggle 

22 INFORMAT 

IONAL 

23 INFORMAT 

IONAL 

24 INFORMAT 

IONAL 

25 INFORMAT 

IONAL 

B.19 PROMISE-UNIFIED-MIB (promiseraid.mib) 


Specific 

Level of 

importance 

Synchronization aborted on array: %s 

Synchronization paused on array: %s 

Synchronization resumed on array: %s 

Synchronization completed on array: %s 

26 CRITICAL Synchronization failed on array: %s 

27 CRITICAL Synchronization comparison error on 

array: %s 

28 MAJOR Swap Box Over Temp on enclosure: %s 

29 MAJOR Swap Box Fan Stop: %s 

30 MAJOR 5V Out of Range for array: %s 

31 MAJOR 12V Out of Range for array: %s 

32 INFORMAT 

IONAL 

33 INFORMAT 

IONAL 

34 INFORMAT 

IONAL 

Swap Box Power On: %s 

Swap Box Power Off: %s 

Unknown 

35 MAJOR The battery's temperature is out of range 

36 MAJOR The battery's temperature is unstable 

37 MAJOR The battery's voltage is out of range 

38 MAJOR The battery's voltage is unstable 

39 MAJOR There is a communication error in the 

battery 

40 INFORMAT 

IONAL 

41 INFORMAT 

IONAL 



variable) 

The battery status becomes normal 

Write Mode state changed 

Remarks 

53

54 


TRAP-TYPE/ 

Alarm type 

trpDiskErrorFix 

Disk error fixed 

trpMediaPatrolStart 

Media Patrol 

trpMediaPatrolStop 

Media Patrol 

trpMediaPatrolAbort 

Media Patrol 

trpMediaPatrolComplete 

Media Patrol 

trpMediaPatrolPause 

Media Patrol 

trpMediaPatrolResume 

Media Patrol 

42 INFORMAT 

IONAL 

43 INFORMAT 

IONAL 

44 INFORMAT 

IONAL 

Disk error fixed by entity 

Media patrol started 

Media patrol stopped 

45 CRITICAL Media patrol aborted 

46 INFORMAT 

IONAL 

47 INFORMAT 

IONAL 

48 INFORMAT 

IONAL 

Media patrol completed 

Media patrol paused 

Media patrol resumed 

B.20 RAID-Adapter-MIB (megaraid.mib) 

Traps from MegaRAID SCSI 320-2. For message details, refer to the RAID controller (RAID Manager 

(GAM: Global Array Manager)) manual. 

TRAP-TYPE/ 

Alarm type 

rtConfigUpdated 

RAID Trap: Configuration 

Updated 

rtPhysicalDriveStateChange 

RAID Trap: Physical Drive 

State Change 

rtLogicalDriveStateChange 

RAID Trap: Logical Drive 

State Change 

rtInitializeStarted 

RAID Trap: Initialize Started 

rtInitializeCompleted 

RAID Trap: Initialize 

Completed 

rtInitializeAborted 

RAID Trap: Initialize Aborted 

rtInitializeFailed 

RAID Trap: Initialize Failed 

rtCheckConsistencyStarted 

RAID Trap: Check 

Consistency Started 

rtCheckConsistencyCompleted 


Consistency Completed 


Specific 

table: RAID-Adapter-MIB Trap (ENTERPRISE : enterprises.16.1.1.200) 

Specific 

Level of 

importance 

Level of 

importance 

9001 INFORMAT 

IONAL 

9002 INFORMAT 

IONAL 

9003 INFORMAT 

IONAL 

9004 INFORMAT 

IONAL 

9005 INFORMAT 

IONAL 

9006 INFORMAT 

IONAL 

9007 INFORMAT 

IONAL 

9008 INFORMAT 

IONAL 

9009 INFORMAT 

IONAL 



variable) 



variable) 

Host Adapter-%d: A New Configuration 

has been written. 

Adapter-%d, Channel-%d, Target-%d: 

Drive State Changed from %s to %s. 

Adapter-%d, Logical Drive-%d: State 

Changed from %s to %s. 

Adapter-%d, Logical Drive-%d: 

Initialization Started. 


Initialization Completed Successfully. 


Initialization Aborted by User. 


Initialization Failed. 

Adapter-%d, Logical Drive-%d: Check 

Consistency Started. 


Consistency Completed. No 

Inconsistencies Found. 

Remarks 

Remarks

TRAP-TYPE/ 

Alarm type 

rtCheckConsistencyAborted 


Consistency Aborted 

rtConsistencyCorrected 


Consistency Corrected 

rtCheckConsistencyFailed 


Consistency Failed 

rtReconstructionStarted 

RAID Trap: Reconstruction 

Started 

rtReconstructionCompleted 


Completed 

rtReconstructionFailed 


Failed 

rtPredictiveFailuresExceeded 


Failure Prediction Threshold 

Exceeded 

rtPredictiveFailuresFalse 


Predictive Failures [FALSE] 

rtCheckConditionStatus 


Check Conditions 

rtNewDriveInserted 

RAID Trap: New Drive 

Inserted 

rtBatteryMissing 

RAID Trap: Battery Missing 

rtBatteryVolatageLow 

RAID Trap: Battery Voltage 

Low 

rtBatteryTemperatureHigh 

RAID Trap: Battery 

Temperature High 

table: RAID-Adapter-MIB Trap (ENTERPRISE : enterprises.16.1.1.200) 

Specific 

Level of 

importance 

9010 INFORMAT 

IONAL 

9011 INFORMAT 

IONAL 

9012 INFORMAT 

IONAL 

9013 INFORMAT 

IONAL 

9014 INFORMAT 

IONAL 

9015 INFORMAT 

IONAL 

9016 INFORMAT 

IONAL 

9017 INFORMAT 

IONAL 

9018 INFORMAT 

IONAL 

9019 INFORMAT 

IONAL 

9020 INFORMAT 

IONAL 

9021 INFORMAT 

IONAL 

9022 INFORMAT 

IONAL 



variable) 


Consistency Aborted by User. 


Consistency Operation Completed. 

Inconsistencies have been Cured. 


Consistency Failed. 


Reconstruction Started. 


Reconstruction Completed Successfully. 


Reconstruction Failed. 


Reported Predictive Failure. (Failure 

Threshold Exceeded) Drive Identification 

String = %s Sense Key = 0x%x, ASC = 

0x%x, ASCQ = 0x%x. 


Reported Predictive Failure. (Failure 

Prediction Threshold Exceeded 

[FALSE]) Drive Identification String = 

%s Sense Key = 0x%x, ASC = 0x%x, 

ASCQ = 0x%x. 


Command Completed with Sense_Key- 

0x%x ASC-0x%x ASCQ-0x%x. 


New Device Inserted. 

Adapter-%d: Battery Module is missing. 

Adapter-%d: Battery Module Voltage is 

Low. 

Adapter-%d: Battery Module 

Temperature Exceeded Danger 

Threshold. 

B.20 RAID-Adapter-MIB (megaraid.mib) 

Remarks 

55

56 


B.21 UPSMAN (Upsman.mib) 

Traps from NetpowerView F. Refer to the NetpowerView F manual for details. 

TRAP-TYPE/ 

Alarm type 

communicationLost 

UPS: Communication failure 

upsOverload 

UPS: UPS overload 

upsTurnedOff 

UPS: Switching off 

communicationEstablished 

UPS: Communication 

established 

powerRestored 

UPS: power restored 

upsOnBattery 

UPS: On battery 

testStarted 

UPS: Test started 

testCompleted 

UPS: Test completed 

upsBatteryLow 

UPS: Battery Low 

upsShutdownImminent 

UPS: Shutdown Imminent 

upsmanStarted 

UPS: UpsMan service started 

upsmanTrapInputBad 

UPS: Abnormal input 

condition 

upsmanTrapOutputOverloadR 

emoved 

UPS: Overload Removed 

table: UPSMAN trap (ENTERPRISE : enterprises.1356) 

Specific 

Level of 

importance 



variable) 

1 CRITICAL Communication with the UPS has been 

lost. 

2 CRITICAL The UPS has sensed a load greater than 

100 percent of its rated capacity. 

3 MAJOR The UPS is being switched off by a 

management station. 

4 INFORMAT 

IONAL 

5 INFORMAT 

IONAL 

Communication with the UPS has been 

established. 

Normal power has been restored to the 

UPS. 

6 MAJOR The UPS system has switched to battery 

backup power. 

7 INFORMAT 

IONAL 

8 INFORMAT 

IONAL 

Remarks 


communication 

between the agent and 

UPS. 

UPS output overload 

has occurred. 

UPS output is 

switched off. 

Communication 

between the agent 

and UPS has been reestablished. 

UPS power voltage 

has returned to within 

the specification 

range. 

UPS is running on 

backup power. 

This trap will be sent 

in the one minute 

period until the UPS 

has stopped or 

running on backup 

power is stopped. 

UPS test has been started. This signals the start 

of UPS test. 

UPS test has been completed. This signals the end 

of UPS test. 

9 MAJOR UPS Battery Low. The battery capacity 

is low. 

Refer to 

upsBatteryStatus. The 

repeat value depends 

on 

upsConfigIntervalTra 

pTime. 

10 INFORMAT 

IONAL 

11 INFORMAT 

IONAL 

UPS Shutdown Imminent. Signals there is one 

minute to server 

shutdown. 

UpsMan service started. Start service. 

12 MAJOR Abnormal input condition UPS power voltage is 

beyond the 

specification range. 

13 INFORMAT 

IONAL 

Overload Removed UPS output overload 

has removed.

TRAP-TYPE/ 

Alarm type 

upsmanTrapBatteryBad 

UPS: Bad battery 

upsmanTrapTempBad 

UPS: Bad temperature 

upsmanTrapTempBadRemoved 

UPS: Bad temperatureRemove 

upsmanTrapFatalFault 

UPS: Fatal fault 

B.22 UPS-MIB (RFC1628.mib) 

Traps from NetpowerView F. Refer to the NetpowerView F manual for details. 

TRAP-TYPE/ 

Alarm type 

upsTrapOnBattery 

UPS on Battery 

upsTrapTestCompleted 

UPS Test Completed 

upsTrapAlarmEntryAdded 

UPS Alarm Entry Added 

upsTrapAlarmEntryRemoved 

UPS Alarm Entry Removed 

table: UPSMAN trap (ENTERPRISE : enterprises.1356) 

Specific 

B.22 UPS-MIB (RFC1628.mib) 

14 MAJOR Bad battery Battery replacement 

necessary. 

15 MAJOR Bad temperature Temperature is 

beyond the 

specification range. It 

is not necessary to 

identify the place 

where the 

temperature error 

occurred. 

For details about the 

content of 

temperature errors, 

refer to 

upsAlarmTempBadD 

etail. 

16 INFORMAT 

IONAL 

Bad temperatureRemove Temperature has 

returned to within the 

specification range. 

17 CRITICAL Fatal fault UPS fatal fault 

occurred. 

This appears when a 

fatal fault that makes 

running on backup 

power impossible has 

occurred in the UPS. 

table: UPS-MIB Trap (ENTERPRISE : mib2.33.2) 

Specific 

Level of 

importance 

Level of 

importance 



variable) 

1 CRITICAL The UPS is on battery power since %d 

seconds 

2 INFORMAT 

IONAL 

3 INFORMAT 

IONAL 

4 INFORMAT 

IONAL 



variable) 

This trap is sent upon completion of a 

UPS diagnostic test. 

This trap is sent each time an alarm is 

inserted into to the alarm table. It is sent 

on the insertion of all alarms except for 

upsAlarmOnBattery and 

upsAlarmTestInProgress. 

This trap is sent each time an alarm is 

removed from the alarm table. It is sent 

on the removal of all alarms except for 

upsAlarmTestInProgress. 

Remarks 

Remarks 

57

58 


B.23 PowerNet-MIB (powernet.mib) 

Traps from APC UPS Web card. Refer to the APC UPS manual for details. 

TRAP-TYPE/ 

Alarm type 

communicationLost 

APC UPS: Communication 

failure 

upsOverload 

APC UPS: UPS overload 

upsDiagnosticsFailed 

APC UPS: Failed self-test 

upsDischarged 

APC UPS: batteries are 

discharged 

upsOnBattery 

APC UPS: On battery 

smartBoostOn 

APC UPS: SmartBoost 

lowBattery 

APC UPS: Low battery 

communicationEstablished 


established 

powerRestored 

APC UPS: Utility restored 

upsDiagnosticsPassed 

APC UPS: Passed self-test 

returnFromLowBattery 

APC UPS: Battery normal 

upsTurnedOff 

APC UPS: Switching off 

upsSleeping 

APC UPS: Going to sleep 

upsWokeUp 

APC UPS: Wake up 

upsRebootStarted 

APC UPS: Starting reboot 

upsDipSwitchChanged 

APC UPS: DIP switch altered 

upsBatteryNeedsReplacement 

APC UPS: UPS batteries 

needs replacement 

contactFault 

APC M-UPS: Contact fault 

contactFaultResolved 

APC M-UPS: Contact normal 

hardwareFailureBypass 

APC UPS: On bypass due to 

internal fault 

table: PowerNet-MIB Trap (ENTERPRISE : enterprises.318) 

Specific 

Level of 

importance 



variable) 

1 CRITICAL Communication lost between the agent 

and the UPS. 

2 CRITICAL The UPS has sensed a load greater than 

100 percent of its rated capacity. 

3 CRITICAL The UPS has failed its internal self-test. 

4 CRITICAL The UPS batteries are discharged. 

5 MAJOR The UPS is now providing battery 

backup power. 

6 MINOR The UPS has enabled SmartBoost. 

7 CRITICAL The UPS system's batteries are low and 

will soon be exhausted. 

8 INFORMAT 

IONAL 

9 INFORMAT 

IONAL 

10 INFORMAT 

IONAL 

11 INFORMAT 

IONAL 

Communication established between the 

agent and the UPS. 

Normal power has been restored to the 

UPS. 

The UPS has passed its internal self-test. 

The UPS has returned from a low battery 

condition. 

12 MAJOR The UPS is being switched off by a 

management station. 

13 MAJOR The UPS is going into sleep mode. 

14 INFORMAT 

IONAL 

The UPS has returned from sleep mode. 

15 MAJOR The UPS has started its reboot sequence. 

16 MINOR The DIP switch settings on the UPS have 

been changed. 

17 CRITICAL The UPS batteries require immediate 

replacement. 

18 CRITICAL A Measure-UPS contact closure has 

faulted. 

19 INFORMAT 

IONAL 

A Measure-UPS contact closure has 

returned to it's default state. 

20 CRITICAL The UPS is on bypass due to an internal 

fault. 

Remarks

TRAP-TYPE/ 

Alarm type 

softwareBypass 

APC UPS: On bypass by user 

via software or panel 

switchedBypass 

APC UPS: On bypass initiated 

by user 

returnFromBypass 

APC UPS: UPS has returned 

from bypass 

bypassPowerSupplyFailure 

APC UPS: Base module 

bypass power supply needs 

repair 

baseFanFailure 

APC UPS: Base module fan 

needs repair 

batteryPackCommLost 


lost with battery packs 

batteryPackCommEstablished 


established with battery packs 

calibrationStart 

APC UPS: Calibration 

initiated 

restartAgent 

APC SNMP Agent: Agent 

restarting 

upsTurnedOn 

APC UPS: A UPS is turned 

on. 

smartAvrReducing 

APC UPS: Smart-AVR 

reducing 

codeAuthenticationDone 

APC CODE: Authentication 

on agent code image is done. 

upsOverloadCleared 

APC UPS: Overload cleared. 

smartBoostOff 

APC UPS: Smartboost off. 

smartAvrReducingOff 

APC UPS: Smart-AVR 

reducing off 

upsBatteryReplaced 

APC UPS: Bad battery 

replaced 

calibrationEnd 

APC UPS: Calibration end 

dischargeCleared 

APC UPS: Discharge cleared. 


Specific 

Level of 

importance 

21 MINOR UPS put on bypass by user via software 

or front UPS panel. 

22 MINOR UPS put on bypass by user. 

23 INFORMAT 

IONAL 

The UPS has returned from bypass mode. 

24 CRITICAL The base module bypass power supply 

needs repair. 

25 CRITICAL The base module fan needs repair. 

26 MINOR Communication lost with external battery 

packs, check battery signal cable. 

27 INFORMAT 

IONAL 

28 INFORMAT 

IONAL 

29 INFORMAT 

IONAL 

30 INFORMAT 

IONAL 

Communication established with external 

battery packs. 

A battery run time calibration test has 

been initiated. 

Agent restarting as commanded by 

manager. 

A UPS is turned on. 

31 MINOR The UPS has enabled Smart-AVR voltage 

reduction. 

32 INFORMAT 

IONAL 



variable) 

Authentication on agent code image is 

done. 

33 MINOR The overload condition has been cleared. 

34 MINOR The UPS has returned from smartboost. 

35 MINOR The UPS has returned from Smart-AVR 

voltage reduction. 

36 MINOR The UPS has returned from a bad battery 

fault. 

37 MINOR The UPS has finished calibrating 

38 MINOR The UPS discharge condition has been 

cleared. 


Remarks 

59

60 


TRAP-TYPE/ 

Alarm type 

gracefullShutdown 

APC UPS: A gracefull 

shutdown has been initiated. 

outletOn 

APC PDU: State change. 

outletOff 


outletReboot 


configChangeSNMP 

APC: State change. 

configChangeOutlet 


accessViolationConsole 

APC: Access violation. 

accessViolationHTTP 

APC: Access violation. 

passwordChange 

APC: Password change. 

badVoltage 

APC UPS: Bad output voltage. 

badVoltageCleared 

APC UPS: The bad voltage 

output condition has been 

cleared. 

chargerFailure 

APC UPS: The battery charger 

has failed. 

chargerFailureCleared 

APC UPS: The battery charger 

failure condition has been 

cleared. 

batteryOverTemperature 

APC UPS: The battery 

temperature threshold has 

been violated. 

batteryOverTemperatureClear 

ed 

APC UPS: The battery over 

temperature has been cleared. 

smartRelayFault 

APC UPS: SmartBoost(TM) 

or SmartTrim(TM) relay fault. 

smartRelayFaultCleared 

APC UPS: SmartBoost(TM) 

or SmartTrim(TM) relay fault 

has been cleared. 

humidityThresholdViolation1 

APC UPS: Probe 1 humidity 

threshold violated. 


Specific 

Level of 

importance 

39 MINOR A gracefull shutdown has been initiated. 

41 WARNING An OUTLET has been turned on 

42 WARNING An OUTLET has turned off. 

43 WARNING An OUTLET has rebooted. 

44 WARNING The SNMP configuration has been 

changed. 

45 WARNING An outlet configuration has been 

changed. 

46 WARNING Three unsuccessful logins have been 

attempted. 

47 WARNING An unsuccessful attempt to login via 

HTTP. 

48 WARNING Someone has changed the password on 

the PDU. 

49 WARNING The output voltage is not within 

acceptable range. 

50 INFORMAT 

IONAL 

The output voltage has returned to an 

acceptable level. 

51 WARNING The battery charger has failed. 

52 INFORMAT 

IONAL 

The battery charger failure condition has 

been cleared. 

53 WARNING The battery temperature threshold has 

been violated. 

54 INFORMAT 

IONAL 

The battery over temperature has been 

cleared. 

55 WARNING SmartBoost(TM) or SmartTrim(TM) 

relay fault. 

56 INFORMAT 

IONAL 



variable) 

SmartBoost(TM) or SmartTrim(TM) 

relay fault has been cleared. 

57 WARNING Probe 1 humidity threshold violated. 

Remarks

TRAP-TYPE/ 

Alarm type 

humidityThresholdViolationCl 

eared1 

APC MEASURE-UPS: A 

humidity threshold violation 

has been cleared on probe 1. 

temperatureThresholdViolatio 

n1 



been violated on probe 1. 


nCleared1 


temperature threshold 

violation has been cleared on 

probe 1. 

humidityThresholdViolation2 


humidity threshold has been 

violated on probe 2. 

humidityThresholdViolationCl 

eared2 


humiditythreshold violation 

has been cleared on probe 2. 


n2 



been violated on probe 2. 


nCleared2 


temperature threshold 

violation has been cleared on 

probe 2. 

mupsCommunicationEstablish 

ed 

APC MUPS: Communication 

established with the Measure- 

UPS 

mupsCommunicationLost 

APC MUPS: MUPS 

Communication failure 

batteryIncrease 

APC UPS: The number of 

batteries has increased. 

batteryDecrease 


batteries has decreased. 

powerModuleIncrease 


power modules has increased. 


Specific 

Level of 

importance 

58 INFORMAT 

IONAL 

A humidity threshold violation has been 

cleared on probe 1. 

59 CRITICAL A temperature threshold has been 


60 MINOR A temperature threshold violation has 

been cleared on probe 1. 

61 CRITICAL A humidity threshold has been violated 

on probe 2. 

62 INFORMAT 

IONAL 

A humidity threshold violation has been 

cleared on probe 2. 

63 CRITICAL A temperature threshold has been 


64 INFORMAT 

IONAL 

65 INFORMAT 

IONAL 

A tempreature threshold violation has 

been cleared on probe 2. 

Communication established between the 

agent and the MUPS. 

66 CRITICAL Communication lost between the agent 

and the MUPS. 

67 INFORMAT 

IONAL 

68 INFORMAT 

IONAL 

69 INFORMAT 

IONAL 



variable) 

The number of batteries has increased. 

The number of batteries has decreased. 

The number of power modules has 

increased. 


Remarks 

61

62 


TRAP-TYPE/ 

Alarm type 

powerModuleDecrease 


power modules has decreased. 

intelligenceModuleInserted 

APC UPS: An intelligence 

module has been inserted. 

intelligenceModuleRemoved 

APC UPS: An intelligence 

module has been removed. 

rintelligenceModuleInserted 

APC UPS: A redundant 

intelligence module has been 

inserted. 

rintelligenceModuleRemoved 

APC UPS: An redundant 

intelligence module has been 

removed. 

extBatteryFrameIncease 

APC UPS: An external battery 

frame has been added. 

extBatteryFrameDecrease 

APC UPS: An external battery 

frame has been removed. 

abnormalCondition 

APC UPS: An abnormal 

condition has been detected. 

abnormalConditionCleared 

APC UPS: An abnormal 

condition has been cleared. 

deviceStatusChange 

APC : The status of the device 

being monitored has changed. 

noBatteries 

APC UPS: No batteries 

attached. 

noBatteriesCleared 

APC UPS: The no batteries 

attached condition has been 

cleared. 

userAdded 

APC: A new user has been 

added. 

userDeleted 

APC: A user has been deleted. 

userModified 

APC: A user has been 

modified. 

msvmCommunicationEstablis 

hed 

APC: Communications with 

the MasterSwitch VM has 

been established. 


Specific 

Level of 

importance 

70 INFORMAT 

IONAL 

71 INFORMAT 

IONAL 

72 INFORMAT 

IONAL 

73 INFORMAT 

IONAL 

74 INFORMAT 

IONAL 

75 INFORMAT 

IONAL 

76 INFORMAT 

IONAL 

The number of power modules has 

decreased. 

An intelligence module has been 

inserted. 

An intelligence module has been 

removed. 

A redundant intelligence module has 

been inserted. 

An redundant intelligence module has 

been removed. 

An external battery frame has been 

added. 

An external battery frame has been 

removed. 

77 MAJOR An abnormal condition has been 

detected. 

78 INFORMAT 

IONAL 

79 INFORMAT 

IONAL 

An abnormal condition has been cleared. 

The status of the device being monitored 

has changed. 

80 WARNING The UPS has no batteries attached. 

81 INFORMAT 

IONAL 

82 INFORMAT 

IONAL 

83 INFORMAT 

IONAL 

84 INFORMAT 

IONAL 

85 INFORMAT 

IONAL 



variable) 

The UPS's batteries have been attached. 

A new user has been added. 

A user has been deleted. 

A user has been modified. 

Communications with the MasterSwitch 

VM has been established. 

Remarks

TRAP-TYPE/ 

Alarm type 

msvmCommunicationLost 


the MasterSwitch VM has 

been lost. 

msvmOverload 

APC: The MasterSwitch VM 

is near or at an overload 

condition. 

msvmOverloadCleared 

APC: The overload condition 

on the MasterSwitch VM has 

been cleared. 

msvmOutletOn 

APC: An outlet on the 

MasterSwitch VM has turned 

on. 

msvmOutletOff 


MasterSwitch VM has turned 

off. 

msvmDeviceConfigChange 

APC: A device configuration 

change has been made on a 

MasterSwitch VM. 

msvmOutletConfigChange 

APC: An outlet configuration 


MasterSwitch VM. 

msvmLowLoad 


has violated the low load 

threshold. 

msvmLowLoadCleared 

APC: The low load condition 


been cleared. 

msvmNearOverload 


is near or at an overload 

condition. 

msvmNearOverloadCleared 

APC: The overload condition 


been cleared. 

msvmPowerSupplyStatusCha 

nge 

APC: The power supply status 

of the MasterSwitch VM has 

changed. 

mspCommunicationEstablished 


the MasterSwitch plus has 



Specific 

Level of 

importance 

86 INFORMAT 

IONAL 

87 INFORMAT 

IONAL 

88 INFORMAT 

IONAL 

89 INFORMAT 

IONAL 

90 INFORMAT 

IONAL 

91 INFORMAT 

IONAL 

92 INFORMAT 

IONAL 

93 INFORMAT 

IONAL 

94 INFORMAT 

IONAL 

95 INFORMAT 

IONAL 

96 INFORMAT 

IONAL 

97 INFORMAT 

IONAL 

98 INFORMAT 

IONAL 



variable) 


VM has been lost. 

The MasterSwitchVM is near or at an 

overload condition. 

The overload condition on the 

MasterSwitch VM has been cleared. 

An outlet on the MasterSwitch VM has 

turned on. 

An outlet on the MasterSwitch VM has 

turned off. 

A device configuration change has been 

made on a MasterSwitch VM. 

An outlet configuration change has been 

made on a MasterSwitch VM. 

The MasterSwitch VM has violated the 

low load threshold. 

The low load condition on the 


The MasterSwitchVM is near or at an 


The overload condition on the 


The power supply status of the 

MasterSwitch VM has changed. 


plus has been established. 


Remarks 

63

64 


TRAP-TYPE/ 

Alarm type 

mspCommunicationLost 


the MasterSwitch plus has 

been lost. 

mspOutletOn 


MasterSwitch plus has turned 

on. 

mspOutletOff 


MasterSwitch plus has turned 

off. 

mspDeviceConfigChange 



MasterSwitch plus. 

mspOutletConfigChange 

APC: An outlet configuration 


MasterSwitch plus. 

rsSourceSwitched 

APC Redundant Switch: The 

Redundant Switch has 

switched source. 

rsLostRedundancy 

APC Redundant Switch: The 

Redundant Switch has lost 

redundancy. 

rsRedundancyRestored 

APC Redundant Switch: 

Redundancy has been restored 

to the Redundant Switch . 

rsConfigChange 

APC: A configuration change 

has been made on a Redundant 

Switch. 

rsCommunicationEstablished 


the Redundant Switch has 


rsCommunicationLost 


the Redundant Switch has 

been lost. 

dcCommunicationEstablished 


the DC power plant has been 

established. 

dcCommunicationLost 


the DC power plant has been 

lost. 


Specific 

Level of 

importance 

99 INFORMAT 

IONAL 

100 INFORMAT 

IONAL 

101 INFORMAT 

IONAL 

102 INFORMAT 

IONAL 

103 INFORMAT 

IONAL 

104 INFORMAT 

IONAL 


plus has been lost. 

An outlet on the MasterSwitch plus has 

turned on. 

An outlet on the MasterSwitch plus has 

turned off. 


made on a MasterSwitch plus. 

An outlet configuration change has been 

made on a MasterSwitch plus. 

The Redundant Switch has switched 

source. 

105 MAJOR The Redundant Switch has has lost 

redundancy. 

106 INFORMAT 

IONAL 

107 INFORMAT 

IONAL 

108 INFORMAT 

IONAL 

Redundancy has been restored to the 

Redundant Switch. 

A configuration change has been made 

on a Redundant Switch. 

Communications with the Redundant 

Switch has been established. 

109 CRITICAL Communications with the Redundant 

Switch has been lost. 

110 INFORMAT 

IONAL 



variable) 

Communications with the DC power 

plant has been established. 

111 CRITICAL Communications with the DC power 

plant has been lost. 

Remarks

TRAP-TYPE/ 

Alarm type 

dcActivePINChanged 

APC: The active PIN on the 

DC controller has been 

changed. 

dcMajorAlarm 

APC: A Major alarm is active 

in the DC power plant. 

dcMajorAlarmCleared 

APC: A Major alarm is no 

longer active in the DC power 

plant. 

dcMinorAlarm 

APC: A Minor alarm is active 

in the DC power plant. 

dcMinorAlarmCleared 

APC: A Minor alarm is no 


plant. 

dcOutputRelayOn 

APC: An output relay has 

gone on. 

dcOutputRelayOff 

APC: An output relay has 

gone off. 

dcInputRelayOn 

APC: An input relay has gone 

on. 

dcInputRelayOff 

APC: An input relay has gone 

off. 

logicPowerSuppliesIncreased 


system power supplies has 

increased. 

logicPowerSuppliesDecreased 


system power supplies has 

decreased. 

externalSwitchGearClosed 

APC UPS: External Switch 

Gear closed. 

externalSwitchGearOpened 

APC UPS: External Switch 

Gear opened. 

generalDeviceEvent 

APC Device event 

atsSourceSwitched 

APC Automatic Transfer 

Switch: The ATS has switched 

source 


Specific 

Level of 

importance 

112 INFORMAT 

IONAL 

The active PIN on the DC controller has 

been changed. 

113 CRITICAL A Major alarm is active in the DC power 

plant. 

114 INFORMAT 

IONAL 

115 INFORMAT 

IONAL 

116 INFORMAT 

IONAL 

117 INFORMAT 

IONAL 

118 INFORMAT 

IONAL 

119 INFORMAT 

IONAL 

120 INFORMAT 

IONAL 

121 INFORMAT 

IONAL 

122 INFORMAT 

IONAL 

123 INFORMAT 

IONAL 

124 INFORMAT 

IONAL 

125 INFORMAT 

IONAL 

126 INFORMAT 

IONAL 



variable) 

A Major alarm is no longer active in the 

DC power plant. 

A Minor alarm is active in the DC power 

plant. 

A Minor alarm is no longer active in the 

DC power plant. 

An output relay has gone on in the DC 

power plant. 

An output relay has gone off in the DC 

power plant. 

An input relay has gone on in the DC 

power plant. 

An input relay has gone off in the DC 

power plant. 

The number of system power supplies 

has increased. 

The number of system power supplies 

has decreased. 

External Switch Gear closed. 

External Switch Gear opened. 

APC Device event. 

The Automatic Transfer Switch has 

switched source. 


Remarks 

65

66 


TRAP-TYPE/ 

Alarm type 

atsLostRedundancy 


Switch: The ATS has lost 

redundancy. 

atsRedundancyRestored 


Switch: Redundancy has been 

restored. 

atsConfigChange 


Switch: ATS configuration 

changed. 

atsCommunicationEstablished 


Switch: Communications 

established. 

atsCommunicationLost 


Switch: Communications lost. 

atsOverCurrent 


Switch: Output Current 

exceeded threshold. 

atsOverCurrentCleared 


Switch: Output Current below 

threshold. 

atsPowerSupplyFailure 


Switch: The ATS Power 

Supply has failed. 

atsPowerSupplyFailureCleared 


Switch: Power Supply Failure 

Cleared. 

dcMainsFailAlarm 

APC: A Mains Fail alarm is 

active in the DC power plant. 

dcMainsFailAlarmCleared 

APC: Mains Fail alarm is no 


plant. 

dcFanFailAlarm 

APC: A Fan Fail alarm is 


dcFanFailAlarmCleared 

APC: A Fan Fail alarm is no 


plant. 

dcRectifierOvertempAlarm 

APC: Rect. Overtemp alarm is 

active in the power plant. 


Specific 

Level of 

importance 

127 MAJOR The Automatic Transfer Switch has has 

lost redundancy. 

128 INFORMAT 

IONAL 

129 INFORMAT 

IONAL 

130 INFORMAT 

IONAL 

Redundancy has been restored to the 

Automatic Transfer Switch. 

A configuration change has been made 

on a Automatic Transfer Switch. 

Communications with the Automatic 

Transfer Switch has been established. 

131 MAJOR Communications with the Automatic 

Transfer Switch has been lost. 

132 MAJOR Output Current has exceeded Threshold. 

133 INFORMAT 

IONAL 

Output Current has returned below 

threshold. 

134 MAJOR The Automatic Transfer Switch Power 

Supply has failed. 

135 INFORMAT 

IONAL 

The Automatic Transfer Switch Power 

Supply Failure Cleared. 

136 WARNING A Mains Fail alarm is active in the DC 

power plant. 

137 INFORMAT 

IONAL 

Mains Fail alarm is no longer active in 

the DC power plant. 

138 WARNING A Fan Fail alarm is active in the DC 

power plant. 

139 INFORMAT 

IONAL 



variable) 

A Fan Fail alarm is no longer active in 


140 WARNING Rect. Overtemp alarm is active in the 

power plant. 

Remarks

TRAP-TYPE/ 

Alarm type 

dcRectifierOvertempAlarmCl 

eared 

APC: Rect. Overtmp alarm is 

no longer active in the power 

plant. 

dcCurrentLimitAlarm 

APC: A Current Limit alarm is 


dcCurrentLimitAlarmCleared 

APC: Current Limit alarm is 


plant. 

dcRectifierFailAlarm 

APC: A Rect. Fail alarm is 


dcRectifierFailAlarmCleared 

APC: Rect. Fail alarm is no 

longer active in the power 

plant. 

dcMultRectFailAlarm 

APC: Multiple Rect. Fail 

alarm is active in the power 

plant. 

dcMultRectFailAlarmCleared 

APC: Mult Rect Fail alarm is 

no longer active in the 

powerplant. 

dcBatteryBreakerAlarm 

APC: Batt. Breaker alarm is 


dcBatteryBreakerAlarmCleared 

APC: Batt. Breaker alarm is 


plant. 

dcRectifierOVPAlarm 

APC: A Rect. OVP alarm is 


dcRectifierOVPAlarmCleared 

APC: A Rect. OVP alarm is no 

longer active in the power 

plant. 

dcLVDImminentAlarm 

APC: A LVD Imminent alarm 

is active in the power plant. 

dcLVDImminentAlarmCleared 

APC: A LVD Imminent alarm 

is no longer active in the 

power plant. 

dcFuseCBAlarm 

APC: A Fuse/CB alarm alarm 

is active in the DC power 

plant. 


Specific 

Level of 

importance 

141 INFORMAT 

IONAL 

Rect. Overtmp alarm is no longer active 

in the power plant. 

142 WARNING A Current Limit alarm is active in the 

power plant. 

143 INFORMAT 

IONAL 

Current Limit alarm is no longer active in 

the power plant. 

144 WARNING A Rect. Fail alarm is active in the power 

plant. 

145 INFORMAT 

IONAL 

Rect. Fail alarm is no longer active in the 

power plant. 

146 WARNING Multiple Rect. Fail alarm is active in the 

powerplant. 

147 INFORMAT 

IONAL 

Mult Rect Fail alarm is no longer active 

in the powerplant. 

148 WARNING Batt. Breaker alarm is active in the power 

plant. 

149 INFORMAT 

IONAL 

Batt. Breaker alarm is no longer active in 


150 WARNING A Rect. OVP alarm is active in the power 

plant. 

151 INFORMAT 

IONAL 

A Rect. OVP alarm is no longer active in 


152 WARNING A LVD Imminent alarm is active in the 

powerplant. 

153 INFORMAT 

IONAL 



variable) 

A LVD Imminent alarm is no longer 

active in the powerplant. 

154 WARNING A Fuse/CB alarm is active in the DC 

power plant. 


Remarks 

67

68 


TRAP-TYPE/ 

Alarm type 

dcFuseCBAlarmCleared 

APC: A Fuse/CB alarm is no 


plant. 

dcBatteryTestFail 

APC: A Battery Test failed in 


dcTemperatureAlarm 

APC: A Temperature alarm is 


dcTemperatureAlarmCleared 

APC: A Temperature alarm is 


plant. 

dcHumidityAlarm 

APC: A Humidity alarm is 


dcHumidityAlarmCleared 

APC: A Humidity alarm is no 


plant. 

dcBBCommunicationEstablis 

hed 

APC: Power plant bridging 

board communications 

established. 

dcBBCommunicationLost 

APC: Power plant bridging 

board communications lost. 

iemHighTempThresholdViolat 

ion 

APC IEM: High temperature 

threshold violation. 

iemHighTempThresholdViolat 

ionCleared 

APC IEM: High temperature 

threshold violation cleared. 

iemLowTempThresholdViolat 

ion 

APC IEM: Low temperature 


iemLowTempThresholdViolat 

ionCleared 

APC IEM: Low temperature 


iemHighHumidThresholdViol 

ation 

APC IEM: High humidity 


iemHighHumidThresholdViol 

ationCleared 

APC IEM: High humidity 



Specific 

Level of 

importance 

155 INFORMAT 

IONAL 

A Fuse/CB alarm is no longer active in 


156 WARNING A Battery Test failed in the DC power 

plant. 

157 WARNING A Temperature alarm is active in the 

power plant. 

158 INFORMAT 

IONAL 

A Temperature alarm is no longer active 

in the power plant. 

159 WARNING A Humidity alarm is active in the DC 

power plant. 

160 INFORMAT 

IONAL 

161 INFORMAT 

IONAL 

A Humidity alarm is no longer active in 


Power plant bridging board 

communications established. 

162 MAJOR Power plant bridging board 

communications lost. 

163 MAJOR High temperature threshold violation. 

164 INFORMAT 

IONAL 

High temperature threshold violation has 

been cleared. 

165 MAJOR Low temperature threshold violation. 

166 INFORMAT 

IONAL 

Low temperature threshold violation has 

been cleared. 

167 MAJOR High humidity threshold violation. 

168 INFORMAT 

IONAL 



variable) 

High humidity threshold violation has 

been cleared. 

Remarks

TRAP-TYPE/ 

Alarm type 

iemLowHumidThresholdViola 

tion 

APC IEM: Low humidity 


iemLowHumidThresholdViola 

tionCleared 

APC IEM: Low humidity 


iemProbeDisconnected 

APC IEM: Probe 

disconnected. 

iemProbeConnected 

APC IEM: Probe Connected. 

iemContactFault 

APC IEM: Contact fault. 

iemContactFaultCleared 

APC IEM: Contact fault. 

iemRelayFault 

APC IEM: Output relay fault. 

iemRelayFaultCleared 

APC IEM: Output relay fault 

condition cleared. 

bmBatManCommEstab 

BatMan : Communications 

Established. 

bmBatManCommLost 

BatMan : Communications 

Lost. 

bmBatManKneeAlarm 

BatMan : Knee Alarm 

Detected. 

bmBatManKneeAlarmCleared 

BatMan : Knee Alarm 

Cleared. 

bmBatManChargerAlarm 

BatMan : Charger Alarm 

Detected. 

bmBatManChargerAlarmClea 

red 

BatMan : Charger Alarm 

Cleared. 

bmBatManBatteryAlarm 

BatMan : Battery Alarm 

Detected. 

bmBatManBatteryAlarmClear 

ed 

BatMan : Battery Alarm 

Cleared. 

bmBatManEnvironmentAlarm 

BatMan : Environment Alarm 

Detected. 


Specific 

Level of 

importance 

169 MAJOR Low humidity threshold violation. 

170 INFORMAT 

IONAL 

Low humidity threshold violation has 

been cleared. 

171 WARNING Probe has been disconnected. 

172 INFORMAT 

IONAL 

Probe has been connected. 

173 MAJOR Contact fault. 

174 INFORMAT 

IONAL 

Contact fault cleared. 

175 MAJOR Output relay has faulted. 

176 INFORMAT 

IONAL 

177 INFORMAT 

IONAL 

Output relay fault cleared. 

Communications Established. 

178 MAJOR Communications Lost. 

179 MAJOR Knee Alarm Detected. 

180 INFORMAT 

IONAL 

Knee Alarm Cleared. 

181 WARNING Charger Alarm Detected. 

182 INFORMAT 

IONAL 

Charger Alarm Cleared. 

183 WARNING Battery Alarm Detected. 

184 INFORMAT 

IONAL 



variable) 

Battery Alarm Cleared. 

185 WARNING Environment Alarm Detected. 


Remarks 

69

70 


TRAP-TYPE/ 

Alarm type 

bmBatManEnvironmentAlarm 

Cleared 

BatMan : Environment Alarm 

Cleared. 

bmBatManMaintenanceAlarm 

BatMan : Maintenance Due 

Alarm Detected. 

bmBatManMaintenanceAlarm 

Cleared 

BatMan : Maintenance Due 

Alarm Cleared. 

pduCommunicationEstablished 

APC PDU: Communication 

Established. 

pduCommunicationLost 

APC PDU: Communication 

Lost. 

pduUtilityLineUndervoltage 

APC PDU: Utility Line 

Undervoltage. 

pduUtilityLineUndervoltageCl 

eared 


Undervoltage Cleared. 

pduUtilityLineOvervoltage 


Overvoltage. 

pduUtilityLineOvervoltageCle 

ared 


Overvoltage Cleared. 

pduGroundOvercurrent 

APC PDU: Ground 

Overcurrent. 

pduGroundOvercurrentCleared 

APC PDU: Ground 

Overcurrent Cleared. 

pduCircuitPanelInputUndervo 

ltage 

APC PDU: Circuit Panel Input 

Undervoltage. 

pduCircuitPanelInputUndervo 

ltageCleared 


Undervoltage Cleared. 

pduCircuitPanelInputOvervolt 

age 


Overvoltage. 

pduCircuitPanelInputOvervolt 

ageCleared 


Overvoltage Cleared. 


Specific 

Level of 

importance 

186 INFORMAT 

IONAL 

187 INFORMAT 

IONAL 

188 INFORMAT 

IONAL 

189 INFORMAT 

IONAL 

Environment Alarm Cleared. 

Maintenance Due Alarm Detected. 

Maintenance Due Alarm Cleared. 

Communication Established. 

190 MAJOR Communication Lost. 

191 MAJOR Utility Line Undervoltage. 

192 INFORMAT 

IONAL 

Utility Line Undervoltage Cleared. 

193 MAJOR Utility Line Overvoltage. 

194 INFORMAT 

IONAL 

Utility Line Overvoltage Cleared. 

195 MAJOR Ground Overcurrent. 

196 INFORMAT 

IONAL 

Ground Overcurrent Cleared. 

197 MAJOR Circuit Panel Input Undervoltage. 

198 INFORMAT 

IONAL 

Circuit Panel Input Undervoltage 

Cleared. 

199 MAJOR Circuit Panel Input Overvoltage. 

200 INFORMAT 

IONAL 



variable) 

Circuit Panel Input Overvoltage Cleared. 

Remarks

TRAP-TYPE/ 

Alarm type 

pduCircuitPanelInputUndercu 

rrent 


Undercurrent. 

pduCircuitPanelInputUndercu 

rrentCleared 


Undercurrent Cleared. 

pduCircuitPanelInputOvercurr 

ent 


Overcurrent. 

pduCircuitPanelInputOvercurr 

entCleared 



pduCircuitPanelFrequencyOut 

OfRange 


Frequency Out Of Range. 

pduCircuitPanelFrequencyOut 

ofRangeCleared 


Frequency No Longer Out Of 

Range. 

pduCircuitPanelNeutralOverc 

urrent 


Neutral Overcurrent. 

pduCircuitPanelNeutralOverc 

urrentCleared 


Neutral Overcurrent Cleared. 

pduSystemOff 

APC PDU: System Off. 

pduOnBatteryMode 

APC PDU: On Battery Mode. 

pduMaintenanceBypassMode 

APC PDU: Maintenance 

Bypass Mode. 

pduAtypicalBypassMode 

APC PDU: Atypical Bypass 

Mode. 

pduNoPanelFeedMode 

APC PDU: No Panel Feed 

Mode. 

pduUpsOperationMode 

APC PDU: Ups Operation 

Mode. 

pduForcedBypassMode 

APC PDU: Forced Bypass 

Mode. 


Specific 

Level of 

importance 

201 MAJOR Circuit Panel Input Undercurrent. 

202 INFORMAT 

IONAL 

Circuit Panel Input Undercurrent 

Cleared. 

203 MAJOR Circuit Panel Input Overcurrent. 

204 INFORMAT 

IONAL 

Circuit Panel Input Overcurrent Cleared. 

205 MAJOR Circuit Panel Input Frequency Out Of 

Range. 

206 INFORMAT 

IONAL 

Circuit Panel Input Frequency No Longer 

Out Of Range. 

207 MAJOR Circuit Panel Input Neutral Overcurrent. 

208 INFORMAT 

IONAL 

209 MAJOR PDU System Off. 

Circuit Panel Input Neutral Overcurrent 

Cleared. 

210 MAJOR PDU is in On Battery Mode. 

211 INFORMAT 

IONAL 

PDU is in Maintenance Bypass Mode. 

212 WARNING PDU is in Atypical Bypass Mode. 

213 MAJOR PDU is in No Panel Feed Mode. 

214 INFORMAT 

IONAL 



variable) 

PDU is in Ups Operation Mode. 

215 WARNING PDU is in Forced Bypass Mode. 


Remarks 

71

72 


TRAP-TYPE/ 

Alarm type 

pduInputTransformerOverTem 

perature 

APC PDU: Input Transformer 

Over Temperature. 

pduInputTransformerOverTem 

peratureCleared 

APC PDU: Input Transformer 

Over Temperature Cleared. 

pduUPSInputVoltageLost 

APC PDU: UPS Input Voltage 

phase-N Lost. 

pduUPSInputVoltageRestored 

APC PDU: UPS Input Voltage 

phase-N Restored. 

pduContactFault 

APC PDU: Contact Abnormal. 

pduContactFaultCleared 

APC PDU: Contact Normal. 

rmPDUUndercurrent 

APC RM PDU: Undercurrent. 

rmPDUUndercurrentCleared 

APC RM PDU: Undercurrent 

Cleared. 

rmPDUOvercurrent 

APC RM PDU: Overcurrent. 

rmPDUOvercurrentCleared 

APC RM PDU: Overcurrent 

Cleared. 

rmPDUOverload 

APC RM PDU: Overload. 

rmPDUOverloadCleared 

APC RM PDU: Overload 

Cleared. 

rmPDUCommunicationEstabli 

shed 

APC RM PDU: 


rmPDUCommunicationLost 

APC RM PDU: 

Communication Lost. 

emsCommunicationEstablished 

APC EMS: Communication 

Established. 

emsCommunicationLost 

APC EMS: Communication 

Lost. 

emsProbeConnected 

APC EMS: Probe Connected. 

emsProbeDisconnected 

APC EMS: Probe 

Disconnected. 


Specific 

Level of 

importance 

216 MAJOR Input Transformer Over Temperature. 

217 INFORMAT 

IONAL 

Input Transformer Over Temperature 

Cleared. 

218 MAJOR UPS Input Voltage phase-N Lost. 

219 INFORMAT 

IONAL 

UPS Input Voltage phase-N Restored. 

220 MAJOR Contact Abnormal. 

221 INFORMAT 

IONAL 

Contact Normal. 

222 MAJOR Undercurrent. 

223 INFORMAT 

IONAL 

Undercurrent Cleared. 

224 MAJOR Overcurrent. 

225 INFORMAT 

IONAL 

226 MAJOR Overload. 

227 INFORMAT 

IONAL 

228 INFORMAT 

IONAL 


Overload Cleared. 



230 INFORMAT 

IONAL 



232 INFORMAT 

IONAL 

Probe Connected. 

233 MAJOR Probe Disconnected. 



variable) 

Remarks

TRAP-TYPE/ 

Alarm type 

emsSensorConnected 

APC EMS: Sensor Connected. 

emsSensorDisconnected 

APC EMS: Sensor 

Disconnected. 

emsSensorFault 

APC EMS: Sensor Fault. 

emsSensorFaultCleared 

APC EMS: Sensor Fault 

Cleared. 

emsBeaconConnected 

APC EMS: Beacon 

Connected. 

emsBeaconDisconnected 

APC EMS: Beacon 

Disconnected. 

emsBeaconOn 

APC EMS: Beacon On. 

emsBeaconOff 

APC EMS: Beacon Off. 

emsMajorAlarm 

APC EMS: Major Alarm. 

emsMajorAlarmCleared 

APC EMS: Major Alarm 

Cleared. 

emsMinorAlarm 

APC EMS: Minor Alarm. 

emsMinorAlarmCleared 

APC EMS: Minor Alarm 

Cleared. 

emsOutletStateAbnormal 

APC EMS: Outlet has changed 

to its abnormal state. 

emsOutletStateNormal 

APC EMS: Outlet has changed 

to its normal state. 

emsInputContactStateAbnorm 

al 

APC EMS: Input contact has 

changed to its abnormal state. 

emsInputContactStateNormal 

APC EMS: Input contact has 

changed to its normal state. 

emsOutputRelayStateAbnorm 

al 

APC EMS: Output Relay has 


emsOutputRelayStateNormal 

APC EMS: Output Relay has 



Specific 

Level of 

importance 

234 INFORMAT 

IONAL 

Sensor Connected. 

235 MAJOR Sensor Disconnected. 

236 MAJOR Sensor Fault. 

237 INFORMAT 

IONAL 

238 INFORMAT 

IONAL 

Sensor Fault Cleared. 

Beacon Connected. 

239 MAJOR Beacon Disconnected. 

240 INFORMAT 

IONAL 

241 INFORMAT 

IONAL 

Beacon On. 

Beacon Off. 

242 MAJOR Major Alarm. 

243 INFORMAT 

IONAL 

Major Alarm Cleared. 

244 MAJOR Minor Alarm. 

245 INFORMAT 

IONAL 

Minor Alarm Cleared. 

246 WARNING Outlet has changed to its abnormal state. 

247 INFORMAT 

IONAL 

Outlet has changed to its normal state. 

248 WARNING Input contact has changed to its abnormal 

state. 

249 INFORMAT 

IONAL 

Input contact has changed to its normal 

state. 

250 WARNING Output Relay has changed to its 

abnormal state. 

251 INFORMAT 

IONAL 



variable) 

Output Relay has changed to its normal 

state. 


Remarks 

73

74 


TRAP-TYPE/ 

Alarm type 

emsDeviceConfigChange 


change on a EMS. 

envHighTempThresholdViolat 

ion 

APC ENV: High temperature 


envHighTempThresholdViolat 

ionCleared 

APC ENV: High temperature 


envLowTempThresholdViolati 

on 

APC ENV: Low temperature 


envLowTempThresholdViolati 

onCleared 

APC ENV: Low temperature 


envHighHumidityThresholdVi 

olation 

APC ENV: High humidity 


envHighHumidityThresholdVi 

olationCleared 

APC ENV: High humidity 


envLowHumidityThresholdVi 

olation 

APC ENV: Low humidity 


envLowHumidityThresholdVi 

olationCleared 

APC ENV: Low humidity 


rPDUCommunicationEstablis 

hed 

APC Rack PDU: 

Communication established. 

rPDUCommunicationLost 

APC Rack PDU: 

Communication lost. 

rPDUOutletOn 

APC Switched Rack PDU: An 

outlet has turned on. 

rPDUOutletOff 

APC Switched Rack PDU: An 

outlet has turned off. 

rPDUDeviceConfigChange 

APC Rack PDU: Device 

configuration change made. 


Specific 

Level of 

importance 

252 INFORMAT 

IONAL 


made on a EMS. 

253 MAJOR High temperature threshold violation. 

254 INFORMAT 

IONAL 

High temperature threshold violation 

cleared. 

255 MAJOR Low temperature threshold violation. 

256 INFORMAT 

IONAL 

Low temperature threshold violation 

cleared. 

257 MAJOR High humidity threshold violation. 

258 INFORMAT 

IONAL 

High humidity threshold violation 

cleared. 

259 MAJOR Low humidity threshold violation. 

260 INFORMAT 

IONAL 

266 INFORMAT 

IONAL 

Low humidity threshold violation 

cleared. 

Communication with a Rack PDU 

established. 

267 MAJOR Communication with a Rack PDU has 

been lost. 

268 INFORMAT 

IONAL 

269 INFORMAT 

IONAL 

270 INFORMAT 

IONAL 



variable) 

An outlet on a Switched Rack PDU has 

turned on. 

An outlet on a Switched Rack PDU has 

turned off. 

Device configuration change has been 

made on a Rack PDU. 

Remarks

TRAP-TYPE/ 

Alarm type 

rPDUOutletConfigChange 

APC Switched Rack PDU: 

Outlet configuration change 

made. 

rPDULowLoad 

APC Rack PDU: Violation of 

low load threshold. 

rPDULowLoadCleared 

APC Rack PDU: Low load 

condition cleared. 

rPDUNearOverload 

APC Rack PDU: Near an 


rPDUNearOverloadCleared 

APC Rack PDU: Near 

overload condition has 

cleared. 

rPDUOverload 

APC Rack PDU: Overload 

condition. 

rPDUOverloadCleared 

APC Rack PDU: Overload 

condition has cleared. 

rPDUPowerSupply1Fail 

APC Rack PDU: Power 

Supply 1 is in FAIL state. 

rPDUPowerSupply1Ok 


Supply 1 is operating 

normally. 

rPDUPowerSupply2Fail 


Supply 2 is in FAIL state. 

rPDUPowerSupply2Ok 


Supply 2 is operating 

normally. 

rPDUPhaseConfigChange 

APC Rack PDU: Phase 

configuration change made. 

rPDUCancelPendingCommand 

APC Switched Rack PDU: 

Cancel Pending Command 

made. 

aruAlinkCommunicationEstab 

lished 

APC ARU: Communication 

Established. 

aruAlinkCommunicationLost 

APC ARU: Communication 

Lost. 

aruFanFail 

APC ARU: Fan Fail. 


Specific 

Level of 

importance 

271 INFORMAT 

IONAL 

Outlet configuration change has been 

made on a Switched Rack PDU. 

272 WARNING A Rack PDU has violated the low load 

threshold. 

273 INFORMAT 

IONAL 

The low load condition on a Rack PDU 

has been cleared. 

274 WARNING A Rack PDU is near an overload 

condition. 

275 INFORMAT 

IONAL 

Rack PDU near overload condition has 

cleared. 

276 MAJOR A Rack PDU is in an overload condition. 

277 INFORMAT 

IONAL 

The overload condition on a Rack PDU 

has cleared. 

278 MAJOR Power Supply 1 on Rack PDU is in FAIL 

state. 

279 INFORMAT 

IONAL 

Power Supply 1 on Rack PDU is 

operating normally. 

280 MAJOR Power Supply 2 on Rack PDU is in FAIL 

state. 

281 INFORMAT 

IONAL 

282 INFORMAT 

IONAL 

283 INFORMAT 

IONAL 

284 INFORMAT 

IONAL 

Power Supply 2 on Rack PDU is 

operating normally. 

Phase configuration change has been 

made on a Rack PDU. 

A Cancel Pending Command has been 

made on a Switched Rack PDU. 



286 MAJOR Fan Fail. 



variable) 


Remarks 

75

76 


TRAP-TYPE/ 

Alarm type 

aruFanFailCleared 

APC ARU: Fan Fail Cleared. 

aruSmokeAlarm 

APC ARU: Smoke Alarm. 

aruSmokeAlarmCleared 

APC ARU: Smoke Alarm 

Cleared. 

aruHighTemperatureAlarm 

APC ARU: High Temperature 

Alarm. 

aruHighTemperatureAlarmCle 

ared 

APC ARU: High Temperature 

Alarm Cleared. 

aruExhaustTemperatureAlarm 

APC ARU: Exhaust 

Temperature Alarm. 

aruExhaustTemperatureAlarm 

Cleared 

APC ARU: Exhaust 

Temperature Alarm Cleared. 

envAlinkCommunicationEsta 

blished 

APC ENV: Communication 

Established. 

envAlinkCommunicationLost 

APC ENV: Communication 

Lost. 

emsAlinkPowerOverload 

APC EMS: Alink Power 

Overload. 

emsAlinkPowerOverloadClear 

ed 

APC EMS: Alink Power 

Overload Cleared. 

upsOutletGroupTurnedOn 

APC UPS: Outlet Group 

turned on. 

upsOutletGroupTurnedOff 

APC UPS: Outlet Group 

turned off. 

smwCriticalCondition 

APC Symmetra MW UPS: A 

critical condition has been 

detected. 

smwCriticalConditionCleared 


critical condition has been 

cleared. 

smwWarningCondition 


warning condition has been 

detected. 


Specific 

Level of 

importance 

287 INFORMAT 

IONAL 

Fan Fail Cleared. 

288 MAJOR Smoke Alarm. 

289 INFORMAT 

IONAL 

Smoke Alarm Cleared. 

290 MAJOR High Temperature Alarm. 

291 INFORMAT 

IONAL 

High Temperature Alarm Cleared. 

292 MAJOR Exhaust Temperature Alarm. 

293 INFORMAT 

IONAL 

294 INFORMAT 

IONAL 

Exhaust Temperature Alarm Cleared. 



296 MAJOR Alink Power Overload. 

297 INFORMAT 

IONAL 

298 INFORMAT 

IONAL 

Alink Power Overload Cleared. 

Outlet Group turned on 

299 WARNING Outlet Group turned off. 

300 MAJOR A critical condition has been detected. 

301 INFORMAT 

IONAL 



variable) 

A critical condition has been cleared. 

302 WARNING A warning condition has been detected. 

Remarks

TRAP-TYPE/ 

Alarm type 

smwWarningConditionCleared 


warning condition has been 

cleared. 

smwInformationalCondition 

APC Symmetra MW UPS: 

Informational condition 

detected. 

smwInformationalConditionCl 

eared 

APC Symmetra MW UPS: 

Informational condition 

cleared. 

airCriticalCondition 

APC Air: A critical condition 

was detected. 

airCriticalConditionCleared 

APC Air: A critical condition 

was cleared. 

airWarningCondition 

APC Air: A warning condition 

was detected. 

airWarningConditionCleared 

APC Air: A warning condition 

was cleared. 

airInformationalCondition 

APC Air: Informational 

condition detected. 

airInformationalConditionCle 

ared 

APC Air: Informational 

condition was cleared. 

xPDUThreePhaseInputVoltage 

Alarm 

APC PDU: Main input voltage 

out-of-range alarm. 

xPDUThreePhaseInputVoltage 

Normal 

APC PDU: Main input voltage 

back in range. 

xPDUThreePhaseBypassVolta 

geAlarm 

APC PDU: Bypass input 

voltage out-of-range alarm. 

xPDUThreePhaseBypassVolta 

geNormal 

APC PDU: Bypass input 

voltage back in range. 

xPDUThreePhaseOutputVolta 

geAlarm 

APC PDU: Output voltage 



Specific 

Level of 

importance 

303 INFORMAT 

IONAL 

304 INFORMAT 

IONAL 

305 INFORMAT 

IONAL 

A warning condition has been cleared. 

An informational condition has been 

detected. 

An informational condition has been 

cleared. 

306 MAJOR A critical condition was detected. 

307 INFORMAT 

IONAL 

A critical condition was cleared. 

308 WARNING A warning condition was detected. 

309 INFORMAT 

IONAL 

310 INFORMAT 

IONAL 

311 INFORMAT 

IONAL 

A warning condition was cleared. 

An informational condition was detected. 

An informational condition was cleared. 

312 MAJOR Input voltage is out-of-range. 

313 INFORMAT 

IONAL 

Input voltage in range. 

314 MAJOR Bypass input voltage is out-of-range. 

315 INFORMAT 

IONAL 



variable) 

Bypass input voltage in range. 

316 MAJOR Output voltage is out-of-range. 


Remarks 

77

78 


TRAP-TYPE/ 

Alarm type 

xPDUThreePhaseOutputVolta 

geNormal 

APC PDU: Output voltage 


xPDUThreePhaseOutputCurre 

ntAlarm 

APC PDU: Output (load) 

current out-of-range alarm. 

xPDUThreePhaseOutputCurre 

ntNormal 

APC PDU: Output (load) 

current back in range. 

xPDUOutputFrequencyAlarm 

APC PDU: Output frequency 


xPDUOutputFrequencyNormal 

APC PDU: Output frequency 


xPDUSystemGroundCurrentA 

larm 

APC PDU: Earth ground 

current over range alarm. 

xPDUSystemGroundCurrentN 

ormal 

APC PDU: Earth ground 


xPDUInputContactStateAbnor 

mal 

APC PDU: Input contact has 


xPDUInputContactStateNorm 

al 

APC PDU: Input contact has 


xPDUOutputRelayStateAbnor 

mal 

APC PDU: Output Relay has 


xPDUOutputRelayStateNorm 

al 

APC PDU: Output Relay has 


xPDUCoolingFanAlarm 

APC PDU: Cooling fan failure 

alarm. 

xPDUCoolingFanAlarmClear 

ed 

APC PDU: Cooling fan alarm 

cleared. 

xPDUTransformerTempAlarm 

APC PDU: Isolation 

transformer over temperature 

alarm. 


Specific 

Level of 

importance 

317 INFORMAT 

IONAL 

Output voltage in range. 

318 MAJOR Output current is out-of-range. 

319 INFORMAT 

IONAL 

Output current in range. 

320 MAJOR Output frequency is out-of-range. 

321 INFORMAT 

IONAL 

Output frequency in range. 

322 MAJOR Earth ground current is over limit. 

323 INFORMAT 

IONAL 

Earth ground current in range. 

324 WARNING Input contact has changed to its abnormal 

state. 

325 INFORMAT 

IONAL 

Input contact has changed to its normal 

state. 

326 WARNING Output Relay has changed to its 

abnormal state. 

327 INFORMAT 

IONAL 

Output Relay has changed to its normal 

state. 

328 MAJOR Cooling fan failure. 

329 INFORMAT 

IONAL 



variable) 

Cooling fan alarm cleared. 

330 MAJOR Transformer temp alarm. 

Remarks

TRAP-TYPE/ 

Alarm type 

xPDUTransformerTempAlarm 

Cleared 

APC PDU: Isolation 

transformer over temperature 

alarm cleared. 

xPDUBranchCurrentAlarm 

APC PDU: Branch circuit 

current out-of-range alarm. 

xPDUBranchCurrentNormal 

APC PDU: Branch circuit 


xPDUBreakerChangeEvent 

APC PDU: Breaker/switch 

change event. 

xPDUInternalCommError 

APC PDU: Internal 

communication error. 

xPDUInternalCommEstablish 

ed 

APC PDU: Internal 


xPDUSystemStateAlarm 

APC PDU: System state alarm. 

xPDUSystemStateNormal 

APC PDU: System state 

returned to normal. 

xPDUEpoTestMode 

APC PDU: Emergency Power 

Off (EPO) in test mode. 

xPDUEpoArmed 

APC PDU: Emergency Power 

Off (EPO) enabled. 

xPDUFuseBlownAlarm 

APC PDU: Check fuse alarm. 

xPDUFuseBlownAlarmCleared 

APC PDU: Check fuse alarm 

cleared. 

xPDUBreakerPositionAlarm 

APC PDU: Breaker position 

alarm. 

xPDUBreakerPositionAlarmC 

leared 

APC PDU: Breaker position 

alarm cleared. 


Specific 

Level of 

importance 

331 INFORMAT 

IONAL 

Transformer temp alarm cleared. 

332 MAJOR Branch circuit current is out-of-range. 

333 INFORMAT 

IONAL 

334 INFORMAT 

IONAL 

Branch circuit current in range. 

Breaker/switch change event. 

335 MAJOR Internal communication error. 

336 INFORMAT 

IONAL 


337 WARNING PDU state alarm. 

338 INFORMAT 

IONAL 

PDU state normal. 

339 WARNING EPO disabled. 

340 INFORMAT 

IONAL 

EPO armed. 

341 MAJOR Fuse detected opened. 

342 INFORMAT 

IONAL 

Fuse alarm cleared. 

343 MAJOR Breaker position alarm. 

344 INFORMAT 

IONAL 



variable) 

Breaker alarm cleared. 


Remarks 

79

80 


B.24 Alert-Definition-Originator-MIB (F5emt2o.mib) 

Traps from Fujitsu LDSM. Refer to the LDSM manual for details. 

TRAP-TYPE/ 

Alarm type 

ldsmTrap-Monitored 

LDSM Monitored Event 

ldsmTrap-Informational 

LDSM Informational Event 

ldsmTrap-Recovered 

LDSM Recovered Event 

ldsmTrap-NonCritical 

LDSM NonCritical Event 

ldsmTrap-Critical 

LDSM Critical Event 

ldsmTrap-NonRecoverable 

LDSM NonRecoverable Event 

table: Alert-Definition-Originator-MIB Trap (ENTERPRISE : enterprises.211.4.1.4.6) 

Specific 

Level of 

importance 

1 INFORMAT 

IONAL 

2 INFORMAT 

IONAL 

4 INFORMAT 

IONAL 

8 INFORMAT 

IONAL 

16 INFORMAT 

IONAL 

32 INFORMAT 

IONAL 

B.25 LDSM-MIB (ldsm.mib) 



variable) 

LDSM has reported: %s %s %s %s 







TRAP-TYPE/ 

Alarm type 

ldsmOKTrap 

Intel LANDeskÆ Server 

Manager has reported a status 

OK event. 

ldsmInformationalTrap 



Informational event. 

ldsmWarningTrap 



Warning event. 

dsmCriticalTrap 



Critical event. 

table: LDSM-MIB Trap (ENTERPRISE : enterprises343.2.5.1.3) 

Specific 

Level of 

importance 

1 INFORMAT 

IONAL 

2 INFORMAT 

IONAL 



variable) 

Intel LANDeskÆ Server Manager has 

reported: The computer's status is %s. 

Intel LANDeskÆ Server Manager has 


3 MINOR Intel LANDeskÆ Server Manager has 


4 CRITICAL Intel LANDeskÆ Server Manager has 


Remarks 

Remarks

B.26 LDCM-MIB (Ldcm.mib) 


TRAP-TYPE/ 

Alarm type 

ldcmUnknownTrap 

IntelÆ LANDeskÆ Client 

Manager has reported an 

Unknown event. 

ldcmInfoTrap 


Manager has reported an 

Informational event. 

ldcmOkTrap 


Manager has reported a 

severity OK event. 

ldcmWarningTrap 



severity Warning event. 

ldcmCriticalTrap 



severity Critical event. 

ldcmFatalTrap 



severity Fatal event. 

table: LDCM-MIB Trap (ENTERPRISE : enterprises343.2.5.1.2) 

Specific 

Level of 

importance 

1 INFORMAT 

IONAL 

2 INFORMAT 

IONAL 

3 INFORMAT 

IONAL 



variable) 

Client Manager has reported an event on 

the computer %s: %s 





4 MINOR Client Manager has reported an event on 


5 CRITICAL Client Manager has reported an event on 


6 CRITICAL Client Manager has reported an event on 


B.26 LDCM-MIB (Ldcm.mib) 

Remarks 

81

82 


B.27 FUJITSU-SERVERVISOR-MIB (Servervi.mib) 

Traps from Fujitsu Severvisor. Refer to the Servervisor manual for details. 

TRAP-TYPE/ 

Alarm type 

svisorTrapType 

Servervisor Event 

table: FUJITSU-SERVERVISOR-MIB Trap (ENTERPRISE : enterprises.211.4.36.1.1.1) 

Specific 

Level of 

importance 

32 INFORMAT 

IONAL 

B.28 RFC1157 (RFC1157.mib) 

Traps from RFC1157. Refer to the RFC1157 manual for details. 

TRAP-TYPE/ 

Alarm type 

rfc1157ColdStart 

Cold start 

rfc1157WarmStart 

Warm start 

rfc1157LinkDown 

Link down 

rfc1157LinkUp 

Link up 

rfc1157AuthenticationFailure 

Authentication failure 

rfc1157EGPNeighborLost 

EGP neighbor lost 

B.29 ROMPILOT-MIB (ROMPILOT.MIB) 

Traps from ROM PILOT (phoenix BIOS). 

TRAP-TYPE/ 

Alarm type 

rpWarmResetTrap 

RomPilot Warm Reset Trap. 

rpColdResetTrap 

RomPilot Cold Reset Trap. 

rpDiagResetTrap 

RomPilot Diagnostic Reset 

Trap. 



variable) 

Servervisor has reported: %s 

table: RFC1157(Microsoft) Trap (ENTERPRISE : enterprises.311.1.1.3.1.x) 

Specific 

Level of 

importance 



variable) 

Remarks 

Remarks 

0 MINOR Station reinitialized. SNMP service started. 

0 MINOR Station reinitialized. SNMP service 

restarted. 

0 CRITICAL Communication link failed at the station 

%d. 

0 MINOR Communication link restored at the 

station %d. 

Interface failed. 

Interface restored. 

0 MINOR Unauthorized message received. An SNMP request 

packet was received 

from an unauthorized 

community. 

0 MAJOR Neighboring station down. 

table: ROMPILOT-MIB Trap (ENTERPRISE : enterprises.2487) 

Specific 

Level of 

importance 

257 INFORMAT 

IONAL 

258 INFORMAT 

IONAL 



variable) 

RomPilot machine %s with MAC 

address %m has performed a warm reset 

and is running the BIOS POST. 


address %m has performed a cold reset 

and is running the BIOS POST. 

259 MINOR RomPilot machine %s with MAC 

address %m has performed a diagnostic 

reset and is running the BIOS POST. 

Remarks

TRAP-TYPE/ 

Alarm type 

rpIDEResetTrap 

RomPilot IDE disk Reset 


rpBootTrap 

RomPilot OS Boot Trap. 

rpPostFtlErrorTrap 

RomPilot Fatal POST Error 


rpPostConErrorTrap 

RomPilot Conditional POST 

Error Trap. 

rpPostWarngTrap 



rpSecurityTrap 

RomPilot Security Breach 


rpNosUpTrap 

RomPilot OS Loaded Trap. 

rpCriticalTrap 

RomPilot Critical Trap. 

rpDisconnectTrap 

RomPilot Disconnect Trap. 

rpReconnectTrap 

RomPilot Reconnect Trap. 

rpPostWarningTrap 

RomPilot POST Warning 


rpPostConditionalTrap 



rpPostFatalTrap 

RomPilot Fatal POST Error 


table: ROMPILOT-MIB Trap (ENTERPRISE : enterprises.2487) 

Specific 

Level of 

importance 


address %m has performed an IDE disk 

reset and is running the BIOS POST. 

512 INFORMAT 

IONAL 


address %m is starting to boot its 

Operating System. 

769 MAJOR RomPilot machine %s with MAC 

address %m has detected a fatal error 

during BIOS POST. 


address %m has detected a conditional 

error during BIOS POST. 




1024 INFORMAT 

IONAL 

1280 INFORMAT 

IONAL 


address %m has loaded its Operating 

System. 


address %m has loaded its Operating 

System. 


address %m has sent a critical trap. 

1792 INFORMAT 

IONAL 

2048 INFORMAT 

IONAL 



variable) 


address %m has sent a disconnect trap 

and will end communications abruptly. 


address %m has sent a reconnect trap. 

This means that the RomPilot enabled 

machine is able to resume 

communications. 


address %m has detected a warning 






address %m has detected a fatal error 


B.29 ROMPILOT-MIB (ROMPILOT.MIB) 

Remarks 

83

84 


B.30 SW-MIB (fcswitch.mib) 

Traps from Fibre Channel Switch SN200. Refer to the SN200 manual for details. 

TRAP-TYPE/ 

Alarm type 

swFault 

Switch is faulty. 

swSensorScn 

A sensor (temperature, fan, 

etc.) changed its operational 

state. 

swFCPortScn 

A Fibre Channel Port changed 

its operational state. 

swEventTrap 

A firmware event has been 

logged 

swFabricWatchTrap 

Fabric Watch has generated an 

event 

swTrackChangesTrap 

Track changes has generated a 

trap 

table: SW-MIB Trap (ENTERPRISE : enterprises.1588.2.1.1.1) 

Specific 

Level of 

importance 

1 CRITICAL Faulty reason: %d 

2 INFORMAT 

IONAL 

3 INFORMAT 

IONAL 

4 INFORMAT 

IONAL 



variable) 

%s: is currently in state %d 

Port Index %d changed state to %d 

Event %d: %s (severity level %d) - %s 

5 MINOR Threshold %s in Class/Area %d at index 

%d has generated event %d with %d on 

%s. This event is %d 

6 INFORMAT 

IONAL 

B.31 ADAPTECDURALINK-MIB (duralink.mib) 

%s 

Remarks 

Traps from Duralink (Adaptec multiport adapter: 10Mbps/100Mbps multiport fast Ethernet network 

interface card). 

TRAP-TYPE/ 

Alarm type 

duralinkStatusTrap 

Port Status Changed 

duralinkPortUp 

Port Available 

duralinkPortDown 

Port Unavailable 

duralinkPortStandby 

Port acting as failover backup 

table: ADAPTECDURALINK-MIB Trap (ENTERPRISE : enterprises.1588.2.1.1.1) 

Specific 

Level of 

importance 

1 INFORMAT 

IONAL 

2 INFORMAT 

IONAL 



variable) 

Group %d Port %d port status is %d. 

Group %s Port %s is up. 

3 MAJOR Group %s Port %s is down. 

4 INFORMAT 

IONAL 

Group %s Port %s is acting as a failover 

backup. 

Remarks

B.32 TapeAlert-MIB (tapealrt.mib) 

Traps from a HP tape device. Refer to the Tape Device manual for details. 

TRAP-TYPE/ 

Alarm type 

tapeAlertTrap1 

HP TapeAlert #1 

































table: TapeAlert-MIB Trap (ENTERPRISE : enterprises.11.2.3.9.7.1) 

Specific 

Level of 

importance 



variable) 

1 MINOR Hba%d:Channel%d:ScsiID%d Tape 

Device Has Problems Reading Data 


Device Has Problems Writing Data 


Device Has Detected Read or Write Data 

Error 

4 CRITICAL Hba%d:Channel%d:ScsiID%d Tape 

Device Has Detected Faulty Media [%s] 


Device May Have Read Fault - Call 

Helpline 


Device May Have Write Fault - Call 

Helpline 


Device Has Detected Worn Out Media 

[%s] 

8 MINOR Hba%d:Channel%d:ScsiID%d Media 

Loaded In Tape Device Is Not Data 

Grade 


Device Attempted Backup to Write- 

Protected Tape 

10 INFORMAT 

IONAL 

11 INFORMAT 

IONAL 

12 INFORMAT 

IONAL 

Hba%d:Channel%d:ScsiID%d Tape 

Device Eject Attempted When Media 

Locked 


Device Attempted Backup/Restore To 

Cleaning Tape 

Hba%d:Channel%d:ScsiID%d Media 

Loaded In Tape Device Is Unsupported 

Type 


Device Has Detected Snapped Tape 


Device Has Detected Snapped Tape 


Device Has Memory Chip in Cartridge 

Failure [%s] 


Cartridge Ejected While Actively 

Writing/Reading 


Device Has Detected Read Only Media 


Remarks 

Tape Device monitor 


Not supported. 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

85

86 


TRAP-TYPE/ 

Alarm type 












































Specific 

Level of 

importance 


Device Has Detected Corrupted 

Directory On Tape 

19 INFORMAT 

IONAL 



variable) 


Device Has Detected Worn Out Media 

[%s] 


Device Needs Cleaning 


Device Requests Routine Cleaning 


Device Has Detected Worn Out Cleaning 

Cartridge 


Device Has Detected Invalid Cleaning 

Cartridge 


Device Requires Preventative 

Maintenance 


Device Has Hardware Fault - Reset Drive 


Device Has Hardware Fault - Call 

Helpline 


Device Has Host Interface Fault 


Device Has Eject Media Request 


Device Has Firmware Download Fault 


Device Humidity Specification Exceeded 


Device Temperature Specification 

Exceeded 


Device Voltage Specification Exceeded 


Device Predicted to Fail - Call Helpline 


Device May Have Hardware Fault - Run 

Diagnostics 


Device Has Autoloader Communications 

Fault 


Device Detects Stray Tape In Autoloader 


Device Has Autoloader Mechanism Fault 


Device Has Autoloader Door Open 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

Remarks

TRAP-TYPE/ 

Alarm type 














































Specific 

Level of 

importance 



variable) 

44 CRITICAL Hba%d:Channel%d:ScsiID%d 

Autoloader Has Hardware Fault - Call 

Helpline 

45 CRITICAL Hba%d:Channel%d:ScsiID%d 

Autoloader Cannot Operate Without 

Magazine 

46 MINOR Hba%d:Channel%d:ScsiID%d 

Autoloader Predicted to Fail - Call 

Helpline 

256 CRITICAL Hba%d:Channel%d:ScsiID%d Library 

Has Drive Communications Fault 

257 MINOR Hba%d:Channel%d:ScsiID%d Library 

Has Changer Mechanism Fault 


Has Hardware Fault - Reset Library 


Has Hardware Fault - Call Helpline 


May Have Hardware Fault - Run 

Diagnostics 


Has Host Interface Fault 


Predicted to Fail - Call Helpline 


Requires Preventative Maintenance 


Humidity Specification Exceeded 


Temperature Specification Exceeded 


Voltage Specification Exceeded 


Detects Stray Tape In Drive 


Has Problems Picking Cartridge from 

Slot 


Has Problems Placing Cartridge into Slot 


Has Problems Loading Cartridge into 

Drive 


Door is Open 


Has Mechanical Fault with Mailslot 


Cannot Operate Without Magazine 


Security Has Been Compromised 


↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

Remarks 

87

88 


TRAP-TYPE/ 

Alarm type 













275 INFORMAT 

IONAL 

276 INFORMAT 

IONAL 

277 INFORMAT 

IONAL 

B.33 IOMMIB (iommib.mib) 

Traps from Adaptec IOManager Storage Controllers. 

TRAP-TYPE/ 

Alarm type 

iomStorageControllerStateCha 

ngeI 

Informational Storage 

Controller State Change. 


ngeW 

Warning Storage Controller 

State Change. 


ngeC 

Critical Storage Controller 

State Change. 

iomBusPortStateChangeI 

Informational Bus Port State 

Change. 

iomBusPortStateChangeW 

Warning Bus Port State 

Change. 

iomBusPortStateChangeC 

Critical Bus Port State 

Change. 

iomStorageDeviceStateChang 

eI 

Informational Storage Device 

State Change. 


eW 

Warning Storage Device State 

Change. 


Specific 

Hba%d:Channel%d:ScsiID%d Library 

Security Mode Changed 


Manually Turned Offline 


Drive Turned Offline 


Has Problems Reading Barcode Labels 


Inventory is Inconsistent 

280 MINOR Hba%d:Channel%d:ScsiID%d Invalid 

Library Operation Attempted 

table: IOMMIB Trap (ENTERPRISE : enterprises.795.12.2) 

Specific 

Level of 

importance 

Level of 

importance 

1010 INFORMAT 

IONAL 



variable) 

The storage controller %d has changed 

state. 

1011 MAJOR The storage controller %d has changed 

state. 

1012 CRITICAL The storage controller %d has changed 

state. 

1020 INFORMAT 

IONAL 

The bus port %d has changed state. 

1021 MAJOR The bus port %d has changed state. 

1022 CRITICAL The bus port %d has changed state. 

1030 INFORMAT 

IONAL 



variable) 

The storage device %d has changed state. 

1031 MAJOR The storage device %d has changed state. 

↑ 

↑ 

↑ 

↑ 

↑ 

↑ 

Remarks 

Remarks

TRAP-TYPE/ 

Alarm type 


eC 

Critical Storage Device State 

Change. 

iomVolumeSetStateChangeI 

Informational Volume Set 

State Change. 

iomVolumeSetStateChangeW 

Warning Volume Set State 

Change. 

iomVolumeSetStateChangeC 

Critical Volume Set State 

Change. 

iomVolumeSetActivityChange 

I 

Informational Volume Set 

Activity Change. 


W 

Warning Volume Set Activity 

Change. 


C 

Critical Volume Set Activity 

Change. 

iomSpareStateChangeI 

Informational Spare State 

Change. 

iomSpareStateChangeW 

Warning Spare State Change. 

iomSpareStateChangeC 

Critical Spare State Change. 

iomEnclosureStateChangeI 

Informational Enclosure State 

Change. 

iomEnclosureStateChangeW 

Warning Enclosure State 

Change. 

iomEnclosureStateChangeC 

Critical Enclosure State 

Change. 

table: IOMMIB Trap (ENTERPRISE : enterprises.795.12.2) 

Specific 

Level of 

importance 

1032 CRITICAL The storage device %d has changed state. 

1040 INFORMAT 

IONAL 

The volume set %d has changed state. 

1041 MAJOR The volume set %d has changed state. 

1042 CRITICAL The volume set %d has changed state. 

1050 INFORMAT 

IONAL 

The volume set %d has changed activity. 

1051 MAJOR The volume set %d has changed activity. 

1052 CRITICAL The volume set %d has changed activity. 

1060 INFORMAT 

IONAL 

The spare %d has changed state. 

1061 MAJOR The spare %d has changed state. 

1062 CRITICAL The spare %d has changed state. 

1070 INFORMAT 

IONAL 



variable) 

A component in IOManager enclosure 

%d has changed state. 

1071 MAJOR A component in IOManager enclosure 


1072 CRITICAL A component in IOManager enclosure 


B.33 IOMMIB (iommib.mib) 

Remarks 

89

90 


B.34 BRIDGE-MIB (trap1493.mib) 

Traps from BRIDGE device. Refer to the RFC1493 for details. 

TRAP-TYPE/ 

Alarm type 

newRoot 

a new root of the Spanning 

True trap 

topologyChange 

topology changed trap 

B.35 RMON-MIB (trap1757.mib) 

Traps from remote network monitor. Refer to the RFC1757 for details. 

TRAP-TYPE/ 

Alarm type 

risingAlarm 

Rising Alarm Trap Sent From 

Rmon Manager that the 

monitor variables has crosses 

its rising threshold 

fallingAlarm 

Faling Alarm Trap Sent From 

Rmon Manager that the 

monitor variables has crosses 

its falling threshold 

B.36 INTEL-WFM-MIB (WFM.mib ) 

Traps from Wired for Management. 

TRAP-TYPE/ 

Alarm type 

wfmTempLowWarningOKWar 

n_LNC_GL 

Temp Low Warning (OK -> 

Warn) (LNC_GL) 

wfmTempOK_LNC_GH 

Temp OK (LNC_GH) 

table: BRIDGE-MIB Trap (ENTERPRISE : mib2.17) 

Specific 

Level of 

importance 

1 INFORMAT 

IONAL 

2 INFORMAT 

IONAL 



variable) 

A trap to inicated when a node has 

become a new root of the Spanning True. 

A trap to inicated when the topology has 

changed. 

table: RMON-MIB Trap (ENTERPRISE : mib2.16) 

Specific 

Level of 

importance 

1 INFORMAT 

IONAL 

2 INFORMAT 

IONAL 



variable) 

The vairable %x we are monitoring has 

occured a Rising Alarm, The alarmValue 

is %d which has crossed over the 

threshold %d within the timeInterval we 

defined in Alarm Table. Note: The 

infomration of this alarm can be get from 

alarm Table index %d and the alarm 

SampleType is %d. 

The vairable %x we are monitoring has 

occured a Falling Alarm, The alarmValue 

is %d which has crossed down the 

threshold %d within the timeInterval we 

defined in Alarm Table. Note: The 

infomration of this alarm can be get from 

alarm Table index %d and the alarm 

SampleType is %d. 

table: INTEL-WFM-MIB Trap (ENTERPRISE : enterprises.3183.1.1) 

Specific 

Level of 

importance 

65792 MAJOR %s 


IONAL 

%s 



variable) 

Remarks 

Remarks 

Remarks

TRAP-TYPE/ 

Alarm type 

wfmTempLowCriticalWarnCrit 

_LC_GL 

Temp Low Critical(Warn -> 

Crit) (LC_GL) 

wfmTempLowWarningCritWar 

n_LC_GH 

Temp Low Warning (Crit -> 

Warn) (LC_GH) 

wfmTempLowCriticalCritNonR 

ecover_LNR_GL 

Temp Low Critical(Crit -> 

NonRecover) (LNR_GL) 

wfmTempLowCriticalNonReco 

verCrit_LNR_GH 

Temp Low 

Critical(NonRecover -> Crit) 

(LNR_GH) 

wfmTempOK_UNC_GL 

Temp OK (UNC_GL) 

wfmTempHighWarningOKWar 

n_UNC_GH 

Temp High Warning (OK -> 

Warn) (UNC_GH) 

wfmTempHighWarningCritWar 

n_UC_GL 

Temp High Warning (Crit -> 

Warn) (UC_GL) 

wfmTempHighCriticalWarnCrit 

_UC_GH 

Temp High Critical(Warn -> 

Crit) (UC_GH) 

wfmTempHighCriticalNonReco 

verCrit_UNR_GL 

Temp High 


(UNR_GL) 

wfmTempHighCriticalCritNon 

Recover_UNR_GH 

Temp High Critical(Crit -> 

NonRecover) (UNR_GH) 

wfmTemperatureOk 

Temperature Ok 

wfmThermalTrip 

Thermal trip 

wfmTemperatureWarningCritic 

al 

Temperature High Critical -> 

Warning 

wfmTempOK_LNC_GL 

Temp OK (LNC_GL) 


Specific 

Level of 

importance 

65794 CRITICAL %s 





IONAL 

%s 







IONAL 

%s 


65929 MINOR %s 


IONAL 

%s 



variable) 


Remarks 

91

92 


TRAP-TYPE/ 

Alarm type 

wfmTempLowWarningOKWar 

n_LNC_GH 

Temp Low Warning (OK -> 

Warn) (LNC_GH) 

wfmTempLowWarningCritWar 

n_LC_GL 

Temp Low Warning (Crit -> 

Warn) (LC_GL) 

wfmTempLowCriticalWarnCrit 

_LC_GH 

Temp Low Critical(Warn -> 

Crit) (LC_GH) 

wfmTempLowCriticalNonReco 

verCrit_LNR_GL 

Temp Low 


(LNR_GL) 

wfmTempLowCriticalCritNonR 

ecover_LNR_GH 

Temp Low Critical(Crit -> 

NonRecover) (LNR_GH) 

wfmTempHighWarningOKWar 

n_UNC_GL 

Temp High Warning (OK -> 

Warn) (UNC_GL) 

wfmTempOK_UNC_GH 

Temp OK (UNC_GH) 

wfmTempHighCriticalWarnCrit 

_UC_GL 

Temp High Critical(Warn -> 

Crit) (UC_GL) 

wfmTempHighWarningCritWar 

n_UC_GH 

Temp High Warning (Crit -> 

Warn) (UC_GH) 

wfmTempHighCriticalCritNon 

Recover_UNR_GL 

Temp High Critical(Crit -> 

NonRecover) (UNR_GL) 

wfmTempHighCriticalNonReco 

verCrit_UNR_GH 

Temp High 


(UNR_GH) 

wfmMemorySingleBitError1 

Memory - Single Bit Error 1 

wfmVoltageLowWarningOKWa 

rn_LNC_GL 

Voltage Low - Warning (OK -> 

Warn) (LNC_GL) 

wfmVoltageOK_LNC_GH 

Voltage OK (LNC_GH) 


Specific 

Level of 

importance 








IONAL 

%s 






IONAL 

%s 

131328 MAJOR %s 


IONAL 

%s 



variable) 

Remarks

TRAP-TYPE/ 

Alarm type 

wfmVoltageLowCriticalWarnCr 

it_LC_GL 

Voltage Low - Critical(Warn -> 

Crit) (LC_GL) 

wfmVoltageLowNoLongerCriti 

cal_LC_GH 

Voltage Low - no longer Critical 

(LC_GH) 

wfmVoltageLowCriticalCritNo 

nRecover_LNR_GL 

Voltage Low - Critical(Crit -> 


wfmVoltageLowCriticalNonRe 

coverCrit_LNR_GH 

Voltage Low - 


(LNR_GH) 

wfmVoltageOK_UNC_GL 

Voltage OK (UNC_GL) 

wfmVoltageHighWarningOKW 

arn_UNC_GH 

Voltage High - Warning (OK -> 

Warn) (UNC_GH) 

wfmVoltageHighNoLongerCriti 

cal_UC_GL 

Voltage High - no longer 

Critical (UC_GL) 

wfmVoltageHighCriticalWarnC 

rit_UC_GH 

Voltage High - Critical(Warn -> 

Crit) (UC_GH) 

wfmVoltageHighCriticalNonRe 

coverCrit_UNR_GL 

Voltage High - 


(UNR_GL) 

wfmVoltageHighCriticalCritNo 

nRecover_UNR_GH 

Voltage High - Critical(Crit -> 

NonRecover) (UNR_GH) 

wfmVoltageLimitExceeded 

Voltage limit exceeded 



wfmVoltageOK_LNC_GL 

Voltage OK (LNC_GL) 



wfmVoltageLowWarningOKWa 

rn_LNC_GH 

Voltage Low - Warning (OK -> 

Warn) (LNC_GH) 


Specific 

Level of 

importance 



IONAL 

%s 




IONAL 

%s 

131335 MAJOR %s 


IONAL 

%s 






IONAL 


IONAL 


IONAL 

%s 

%s 

%s 

164097 MAJOR %s 



variable) 


Remarks 

93

94 


TRAP-TYPE/ 

Alarm type 



wfmVoltageLowNoLongerCriti 

cal_LC_GL 

Voltage Low - no longer Critical 

(LC_GL) 



wfmVoltageLowCriticalWarnCr 

it_LC_GH 

Voltage Low - Critical(Warn -> 

Crit) (LC_GH) 



wfmVoltageLowCriticalNonRe 

coverCrit_LNR_GL 

Voltage Low - 


(LNR_GL) 



wfmVoltageLowCriticalCritNo 

nRecover_LNR_GH 

Voltage Low - Critical(Crit -> 




wfmVoltageHighWarningOKW 

arn_UNC_GL 

Voltage High - Warning (OK -> 

Warn) (UNC_GL) 



wfmVoltageOK_UNC_GH 

Voltage OK (UNC_GH) 



wfmVoltageHighCriticalWarnC 

rit_UC_GL 

Voltage High - Critical(Warn -> 

Crit) (UC_GL) 



wfmVoltageHighNoLongerCriti 

cal_UC_GH 

Voltage High - no longer 

Critical (UC_GH) 




Specific 

Level of 

importance 


IONAL 


IONAL 


IONAL 

%s 

%s 

%s 



IONAL 

%s 



IONAL 

%s 



IONAL 

%s 

164102 MAJOR %s 


IONAL 


IONAL 


IONAL 

%s 

%s 

%s 



IONAL 


IONAL 


IONAL 

%s 

%s 

%s 



variable) 

Remarks

TRAP-TYPE/ 

Alarm type 

wfmVoltageHighCriticalCritNo 

nRecover_UNR_GL 

Voltage High - Critical(Crit -> 

NonRecover) (UNR_GL) 



wfmVoltageHighCriticalNonRe 

coverCrit_UNR_GH 

Voltage High - 


(UNR_GH) 



wfmFanPreFailOKWarn_LNC_ 

GL 

Fan Pre-Fail (OK -> Warn) 

(LNC_GL) 



wfmFanIsWorkingOK_LNC_GH 

Fan is working (OK) 

(LNC_GH) 



wfmFanFailedWarnCrit_LC_GL 

Fan Failed (Warn -> Crit) 

(LC_GL) 



wfmFanPreFailCritWarn_LC_ 

GH 

Fan Pre-Fail(Crit -> Warn) 

(LC_GH) 



wfmFanFailedCritNonRecover 

_LNR_GL 

Fan Failed (Crit -> 




wfmFanFailedNonRecoverCrit 

_LNR_GH 

Fan Failed (NonRecover -> 

Crit) (LNR_GH) 



wfmFanOK 

Fan OK 




Specific 

Level of 

importance 



IONAL 

%s 



IONAL 

%s 

262400 MAJOR %s 


IONAL 


IONAL 


IONAL 

%s 

%s 

%s 



IONAL 

%s 

262403 MAJOR %s 


IONAL 

%s 



IONAL 

%s 



IONAL 


IONAL 


IONAL 

%s 

%s 

%s 



variable) 


Remarks 

95

96 


TRAP-TYPE/ 

Alarm type 

wfmFanFailed 

Fan Failed 



wfmFanPredictiveFailureDeass 

erted 

Fan predictive failure 

deasserted 



wfmFanPredictiveFailureAssert 

ed 

Fan predictive failure asserted 



wfmFanRemoved 

Fan removed 



wfmFanRestoredreplaced 

Fan restored/replaced 



wfmFANSensorSpecificErrorR 

eported 

FAN Sensor specific Error 

reported 



wfmFanIsWorkingOK_LNC_GL 

Fan is working (OK) 

(LNC_GL) 



wfmFanPreFailOKWarn_LNC_ 

GH 

Fan Pre-Fail(OK -> Warn) 

(LNC_GH) 



wfmFanPreFailCritWarn_LC_ 

GL 

Fan Pre-Fail(Crit -> Warn) 

(LC_GL) 

wfmFanFailedWarnCrit_LC_GH 

Fan Failed (Warn -> Crit) 

(LC_GH) 

wfmFanFailedNonRecoverCrit 

_LNR_GL 

Fan Failed (NonRecover -> 

Crit) (LNR_GL) 


Specific 

Level of 

importance 



IONAL 

%s 

263168 MAJOR %s 


IONAL 

%s 

263169 MAJOR %s 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

295169 MAJOR %s 


IONAL 

%s 

295170 MAJOR %s 





variable) 

Remarks

TRAP-TYPE/ 

Alarm type 

wfmFanFailedCritNonRecover 

_LNR_GH 

Fan Failed (Crit -> 


wfmPhysicalIntrusionclosed 

Physical intrusion (closed) 

wfmPhysicalIntrusionopened 

Physical intrusion (opened) 

wfmChassisIntrusionopened 

Chassis Intrusion (opened) 

wfmDriveBayIntrusionopened 

DriveBay Intrusion (opened) 

wfmIOAreaIntrusionopened 

I/O area Intrusion (opened) 

wfmCPUAreaIntrusionopened 

CPU area Intrusion (opened) 

wfmLANLeashLostCableUnplu 

gged 

LAN Leash lost (Cable 

unplugged) 

wfmUnautorizedDockundock 

Unautorized dock/undock 

wfmFANAreaIntrusionopened 

FAN Area Intrusion (opened) 

wfmChassisIntrusion 

Chassis Intrusion 

wfmChassisIntrusionclosed 

Chassis Intrusion (closed) 

wfmDriveBayIntrusionclosed 

DriveBay Intrusion (closed) 

wfmIOAreaIntrusionclosed 

I/O area Intrusion (closed) 

wfmCPUAreaIntrusionclosed 

CPU area Intrusion (closed) 

wfmLANLeashReconnected 

LAN Leash reconnected 

wfmUnautorizedDockundock 

Unautorized dock/undock 

wfmFANAreaIntrusionclosed 

FAN Area Intrusion (closed) 

wfmSecureModeViolationAtte 

mptFrontPanelButtonReleased 

Secure mode violation attempt: 

front panel button released 


mptFrontPanelButtonPressed 


front panel button pressed 


mptFrontPanelButtonPressed 


front panel button pressed 


Specific 

Level of 

importance 



IONAL 

%s 

328449 MINOR %s 

356096 MINOR %s 

356097 MINOR %s 

356098 MAJOR %s 

356099 MAJOR %s 

356100 MAJOR %s 

356101 MAJOR %s 

356102 MINOR %s 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 



variable) 


Remarks 

97

98 


TRAP-TYPE/ 

Alarm type 


mptPrebootUSERPasswordWro 

ng 


Pre-boot USER password 

wrong 


mptPrebootSETUPPasswordWr 

ong 


Pre-boot SETUP password 

wrong 


mptPrebootNETWORKPasswo 

rdWrong 


Pre-boot NETWORK password 

wrong 


mptPrebootOTHERPasswordW 

rong 


Pre-boot OTHER password 

wrong 


mptOutofbandAccessPassword 

Wrong 


Out-of-band access password 

wrong 

wfmCPUPredictiveFailure 

CPU Predictive Failure 

wfmCPUInternalError 

CPU internal error 

wfmCPUThermalTripFailure 

CPU thermal trip failure 

wfmCPUFailedBuiltinSelftestD 

isabledFRB1 

CPU failed built-in selftest; 

disabled (FRB1) 

wfmCPUHungDuringPOSTDis 

abledFRB2 

CPU hung during POST; 

disabled (FRB2) 

wfmCPUStartupinitializationFa 

ilureDisabledFRB3 

CPU startup/initialization 

failure; disabled (FRB3) 

wfmCPUConfigurationError 

CPU configuration error 


Specific 

Level of 

importance 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 

%s 

%s 

%s 

%s 

%s 

459777 MAJOR %s 






487173 MAJOR %s 



variable) 

Remarks

TRAP-TYPE/ 

Alarm type 

wfmUncorrectableCPUcomplex 

Error 

Uncorrectable CPU-complex 

error 

wfmCPUPresenceDetected 

CPU presence detected 

wfmCPUDisabled 

CPU Disabled 

wfmCPUTerminatorPresenceD 

etected 

CPU terminator presence 

detected 

wfmCPUThrottledstart 

CPU throttled (start) 

wfmCpuClockUnthrottle 

CPU clock unthrottle 

wfmCPUFailedBISTDisabledF 

RB1 

CPU failed BIST; disabled 

(FRB1) 

wfmCPUDisabled 

CPU Disabled 

wfmCPUNotPresent 

CPU not present 

wfmCPUTerminatorNotDetected 

CPU terminator not detected 

wfmCPUThrottleEnd 

CPU throttle end 

wfmCPUEnabled 

CPU Enabled 

wfmPowerSupplyInserted 

Power supply inserted 

wfmPowerSupplyAuxDCPower 

Fail 

Power supply Aux/DC power 

fail 

wfmPowerSupplyPredictiveFail 

ure 

Power supply predictive failure 

wfmPowerSupplyInputLostAC 

DC 

Power supply input lost (AC/ 

DC) 

wfmPowerSupplyInputLostOrO 

utofrange 

Power supply input lost or outof-range 

wfmPowerSupplyInputOutofra 

ngeButPresent 

Power supply input out-ofrange, 

but present 


Specific 

Level of 

importance 



IONAL 


IONAL 


IONAL 

%s 

%s 

%s 

487178 MAJOR %s 


IONAL 

%s 



IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 

%s 

%s 

%s 

%s 

%s 

%s 








variable) 


Remarks 

99

100 


TRAP-TYPE/ 

Alarm type 

wfmPowerSupplyConfiguration 

Error 

Power supply configuration 

error 

wfmPowerSupplyRemoved 


wfmPowerUnitCriticalNumber 

OfPS 

Power unit critical number of 

PS 

wfmPowerUnitRedundancyReg 

ained 

Power unit redundancy regained 

wfmPowerUnitRedundancyLost 

Power unit redundancy lost 

wfmPowerUnitPowerOffPower 

Down 

Power Unit - Power Off / Power 

Down 

wfmPowerUnitPowerCycle 

Power Unit - Power cycle 

wfmPowerUnit240VAPowerDo 

wn 

Power Unit - 240 VA Power 

Down 

wfmInterlockPowerDown 

Interlock Power down 

wfmPowerUnitACLost 

Power unit - A/C lost 

wfmPowerUnitSoftPowerContr 

olFailure 

Power unit - Soft Power Control 

failure 

wfmPowerUnitFailure 

Power unit failure 

wfmPowerUnitPredictiveFailure 

Power unit predictive failure 

wfmPowerUnitPowerOn 

Power Unit - Power On 

wfmPowerUnit240VAPowerRe 

stored 

Power Unit - 240 VA Power 

restored 

wfmInterlockPowerRestored 

Interlock Power restored 

wfmPowerUnitPowerRestored 

Power unit - Power restored 

wfmPowerUnitOK 

Power unit OK 

wfmMultipleFanFailure 

Multiple fan failure 


Specific 

Level of 

importance 

552710 MAJOR %s 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 


618245 MAJOR %s 

618246 MAJOR %s 

618247 MAJOR %s 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 

%s 

%s 

%s 

%s 

%s 

%s 



variable) 

Remarks

TRAP-TYPE/ 

Alarm type 

wfmMemoryPDAEventModule 

Memory - PDA event Module 

wfmMemorySinglebitError 

Memory - Single-bit error 

wfmMemoryMultibitError 

Memory - Multi-bit error 

wfmMemoryParityError 

Memory - Parity error 

wfmMemoryScrubFailed 

Memory - scrub failed 

wfmMemoryDeviceDisabled 

Memory - device disabled 

wfmMemoryErrorLoggingLimi 

tReached 

Memory - error logging limit 

reached 

wfmMemoryPresenceDetected 

Memory - presence detected 

wfmMemoryConfigurationError 

Memory - configuration error 

wfmMemorySpare 

Memory - spare 

wfmMemoryDeviceDisabled 

Memory - device disabled 

wfmMemoryDeviceRemoved 

Memory - device removed 

wfmMemoryDeviceEnabled 

Memory - device enabled 

wfmHotswapCageRemoved 

Hotswap cage removed 

wfmHotswapCageInserted 

Hotswap cage inserted 

wfmPOSTMemoryResizedConf 

igChanged 

POST - Memory Resized/ 

Config changed 

wfmPOSTGenericError 

POST - Generic error 

wfmPOSTError 

POST - Error 

wfmPOSTSystemFirmwareHA 

NG 

POST - System Firmware 

HANG 

wfmPOSTSystemFirmwarePR 

OGRESS 

POST - System Firmware 

PROGRESS 

wfmCorrectableMemoryErrorL 

oggingDisabled 


logging disabled 


Specific 

Level of 

importance 


IONAL 

%s 

814848 MINOR %s 




IONAL 


IONAL 

%s 

%s 

814853 MAJOR %s 


IONAL 

%s 

814855 MAJOR %s 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 

%s 

%s 

%s 

%s 

%s 

%s 

945920 MAJOR %s 


IONAL 

%s 




IONAL 


IONAL 

%s 

%s 



variable) 


Remarks 

101

102 


TRAP-TYPE/ 

Alarm type 

wfmLoggingDisabledForErrorT 

ype 

Logging disabled for error type 

wfmEventLogCleared 

Event log cleared 

wfmAllEventLoggingDisabled 

All Event logging disabled 

wfmSELFull 

SEL full 

wfmSELAlmostFull 

SEL almost full 


ogging 


logging 


oggingEnabled 


logging enabled 

wfmLoggingEnabledForErrorT 

ype 

Logging enabled for error type 

wfmAllEventLoggingEnabled 

All Event logging enabled 

wfmWatchdogBIOSWatchdogR 

eset 

Watchdog: BIOS Watchdog 

Reset 

wfmWatchdogOSWatchdogRes 

et 

Watchdog: OS Watchdog Reset 

wfmWatchdogOSWatchdogShu 

tdown 

Watchdog: OS Watchdog 

Shutdown 

wfmWatchdogOSWatchdogPo 

werDown 

Watchdog: OS Watchdog Power 

Down 

wfmWatchdogOSWatchdogPo 

werCycle 

Watchdog: OS Watchdog Power 

Cycle 

wfmWatchdogOSWatchdogNM 

IDiagnosticInt 

Watchdog: OS Watchdog NMI/ 

Diagnostic Int. 

wfmWatchdogOSWatchdogStat 

usExpired 

Watchdog: OS Watchdog Status 

Expired 


Specific 

Level of 

importance 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 









variable) 

Remarks

TRAP-TYPE/ 

Alarm type 

wfmWatchdogOSWatchdogPret 

imeoutInterruptNonNMI 

Watchdog: OS Watchdog pretimeout 

Interrupt, non-NMI 

wfmUnspecifiedSystemEvent 

Unspecified system event 

wfmSystemReconfigured 

System reconfigured 

wfmSystemBootPOSTComplete 

System boot (POST complete) 

wfmUndeterminedSystemHard 

wareFailure 

Undetermined system hardware 

failure 

wfmEntryAddedToAuxiliaryLog 

Entry added to Auxiliary Log 

wfmEmergencyPowerOff 

Emergency PowerOff 

wfmTimestampClockSynchEve 

nt 

Timestamp Clock Synch event 

wfmSystemReconfigurationEve 

ntDetected 

System reconfiguration event 

detected 

wfmFrontPanelNMIDiagnosticI 

nterrupt 

Front Panel NMI / Diagnostic 

Interrupt 

wfmBusTimeout 

Bus timeout 

wfmIOChannelCheckNMI 

I/O channel check NMI 

wfmSoftwareNMI 

Software NMI 

wfmPCIPERR 

PCI PERR 

wfmPCISERR 

PCI SERR 

wfmEISAFailsafeTimerExpired 

EISA Failsafe timer expired 

wfmCorrectableBusError 

Correctable bus error 

wfmUncorrectableBusError 

Uncorrectable bus error 

wfmFatalNMIPort61hBit7 

Fatal NMI (Port 61h Bit 7) 

wfmPOWERButtonPressed 

POWER Button pressed 

wfmSLEEPButtonPressed 

SLEEP Button pressed 


Specific 

Level of 

importance 


IONAL 


IONAL 

%s 

%s 

1208064 MINOR %s 


IONAL 

%s 



IONAL 


IONAL 


IONAL 


IONAL 

%s 

Emergency PowerOff, if Server failed to 

boot Diagnostic System. Details: %s 

%s 

%s 












IONAL 


IONAL 

%s 

%s 



variable) 


Remarks 

103

104 


TRAP-TYPE/ 

Alarm type 

wfmRESETButtonPressed 

RESET Button pressed 

wfmFRULatchOpen 

FRU - latch open 

wfmFRUServiceRequested 

FRU - service requested 

wfmSCSIDuplexBoardHasBee 

nRemoved 

SCSI Duplex Board has been 

removed 

wfmSCSIDuplexBoardHasBee 

nInserted 

SCSI Duplex Board has been 

inserted 

wfmCacheProtocolAndParityEr 

ror 

Cache protocol and parity error 

wfmSoftPowerControlFailed 

Soft Power Control Failed 

wfmACPIHardwareFailure 

ACPI hardware failure 

wfmCableConnected 

Cable connected 

wfmCableDisconnected 

Cable disconnected 

wfmTerminatorAttached 

Terminator attached 

wfmTerminatorRemoved 

Terminator removed 

wfmSystemRebootedByPower 

Up 

System rebooted by PowerUp 

wfmSystemRebootedByHardRe 

set 

System rebooted by Hard Reset 

wfmSystemRebootedByWarmR 

eset 

System rebooted by Warm 

Reset 

wfmSystemRebootedToPXEBo 

ot 

System rebooted to PXE Boot 

wfmDiagnosticSystemBoot 

Diagnostic System boot 

wfmNoBootableMedia 

No bootable media 

wfmNonBootableDisketteLeftI 

nDrive 

Non bootable diskette left in 

drive 

wfmPXEServerNotFound 

PXE Server not found 


Specific 

Level of 

importance 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

Server boots to Diagnostic System. 

Details: %s 

%s 

%s 

%s 



variable) 

Remarks

TRAP-TYPE/ 

Alarm type 

wfmInvalidBootSector 

Invalid boot sector 

wfmTimeoutWaitingForUserSel 

ectionOfBootSource 

Timeout waiting for user 

selection of boot source 

wfmABootCompleted 

A: Boot completed 

wfmCBootCompleted 

C: Boot completed 

wfmPXEBootCompleted 

PXE Boot completed 

wfmDiagnosticBootCompleted 

Diagnostic Boot completed 

wfmCDROMBootCompleted 

CD-ROM Boot completed 

wfmROMBootCompleted 

ROM Boot completed 

wfmBootCompletedBootDevic 

eNotSpecified 

Boot completed - boot device 

not specified 

wfmStopDuringOSLoadInitiali 

zation 

Stop during OS load / 

initialization 

wfmRuntimeStop 

Run-time Stop 

wfmPCIHotPlugSlotFaultAsser 

ted 

PCI Hot Plug Slot fault asserted 

wfmPCIHotPlugSlotIdentifyAs 

serted 

PCI Hot Plug Slot identify 

asserted 

wfmPCIHotPlugSlotDeviceInst 

alled 

PCI Hot Plug Slot Device 

installed 

wfmPCIHotPlugSlotReadyFor 

DeviceInstallation 

PCI Hot Plug Slot ready for 

device installation 

wfmPCIHotPlugSlotReadyFor 

DeviceRemoval 

PCI Hot Plug Slot ready for 

device removal 

wfmPCIHotPlugSlotPoweredOff 

PCI Hot Plug Slot powered off 


Specific 

Level of 

importance 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

2125568 MAJOR %s 

2125569 MAJOR %s 

2191104 MAJOR %s 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 

%s 

%s 

%s 

%s 

%s 



variable) 


Remarks 

105

106 


TRAP-TYPE/ 

Alarm type 

wfmPCIHotPlugSlotRemovalR 

equest 

PCI Hot Plug Slot removal 

request 

wfmPCIHotPlugSlotInterlockA 

ssertedlatchNotClosed PCI Hot 

Plug Slot Interlock asserted 

(latch not closed) 

wfmPCIHotPlugSlotDisabled 

PCI Hot Plug Slot disabled 

wfmPCIHotPlugSlotHoldsSpar 

eDevice 

PCI Hot Plug Slot holds spare 

device 

wfmPCIHotPlugSlotFaultDeass 

erted 

PCI Hot Plug Slot fault 

deasserted 

wfmPCIHotPlugSlotIdentifyDe 

asserted 

PCI Hot Plug Slot identify 

deasserted 

wfmPCIHotPlugSlotDeviceRe 

moved 

PCI Hot Plug Slot Device 

removed 

wfmPCIHotPlugSlotPoweredOn 

PCI Hot Plug Slot powered on 

wfmPCIHotPlugSlotEnabled 

PCI Hot Plug Slot enabled 

wfmACPIPowerStateWorkingS 

0G0 

ACPI Power State: working 

(S0/G0) 

wfmACPIPowerStateSleepingS1 

ACPI Power State: sleeping 

(S1) 



(S2) 



(S3) 

wfmACPIPowerStateSleepingS 

4SuspendToDisk 

ACPI Power State: sleeping (S4 

- Suspend to disk) 


5SoftOff 


- soft off) 


Specific 

Level of 

importance 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 



variable) 

Remarks

TRAP-TYPE/ 

Alarm type 


4S5 


(S4/S5) 

wfmACPIPowerStateSleepingG 

7MechanicalOff 

ACPI Power State: sleeping (G7 

- mechanical off) 


1S2S3 


(S1/S2/S3) 

wfmACPIPowerStateSleepingG1 


(G1) 


5ByOverrride 


- by overrride) 

wfmACPIPowerStateLegacyO 

NState 

ACPI Power State: Legacy ON 

State 

wfmACPIPowerStateLegacyOF 

FState 

ACPI Power State: Legacy OFF 

State 

wfmACPIPowerStateUnknown 

ACPI Power State: unknown 

wfmACPIPowerStateUnknown 

ACPI Power State: unknown) 

wfmACPIPowerDown 

ACPI Power down 

wfmWatchdogTimerExpired 

Watchdog: Timer Expired 

wfmWatchdogHardReset 

Watchdog: Hard Reset 

wfmWatchdogPowerDown 

Watchdog: Power Down 

wfmWatchdogPowerCycle 

Watchdog: Power Cycle 

wfmWatchdogHardwareWatchd 

ogExpired 

Watchdog: Hardware Watchdog 

expired 

wfmWatchdogTimerInterrupt 

Watchdog: Timer Interrupt 

wfmSystemEventlogAboveWar 

ningLevel 

System Eventlog above warning 

level 


Specific 

Level of 

importance 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 








IONAL 

%s 



variable) 


Remarks 

107

108 


TRAP-TYPE/ 

Alarm type 

wfmSELAlmostFilledUp 

SEL almost filled up 

wfmLANHeartbeatLost 

LAN Heartbeat lost 

wfmLANHeartbeat 

LAN Heartbeat 

wfmSensorAccessDegraded 

Sensor access degraded 

wfmControllerAccessDegraded 

OrUnavailable 

Controller access degraded or 

unavailable 

wfmManagementControllerOffl 

ine 

Management Controller off-line 

wfmManagementControllerUna 

vailable 

Management Controller 

unavailable 

wfmBatteryLowpredictiveFailu 

re 

Battery low (predictive failure) 

wfmBatteryFailed 

Battery failed 

wfmBatteryPresenceDetected 

Battery presence detected 

wfmSESSIONActivated 

SESSION activated 

wfmSESSIONDeactivated 

SESSION De-activated 

wfmHWChangeDetected 

HW change detected 

wfmFWOrSWChangeDetected 

FW or SW change detected 

wfmHWIncompatibilityDetected 

HW incompatibility detected 

wfmFWOrSWIncompatibilityD 

etected 

FW or SW incompatibility 

detected 

wfmInvalidunsupportedHWVer 

sionDetected 

Invalid/unsupported HW 

version detected 

wfmInvalidunsupportedFWOrS 

WVersionDetected 

Invalid/unsupported FW or SW 

version detected 

wfmHWChangeSuccessful 

HW change successful 


Specific 

Level of 

importance 


IONAL 


IONAL 


IONAL 

%s 

%s 

%s 

2649856 MINOR %s 

2649857 MAJOR %s 

2649858 MAJOR %s 


2715392 MINOR %s 

2715393 MAJOR %s 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 



variable) 

Remarks

TRAP-TYPE/ 

Alarm type 

wfmFWOrSWChangeSuccessf 

ul 

FW or SW change successful 

wfmHWChangeFailed 

HW change failed 

wfmFWOrSWChangeFailed 

FW or SW change failed 

wfmOEMEventlogEntryC0 

OEM Eventlog Entry (C0) 

wfmOEMEventlogEntryC1Stat 

eDeAsserted 

OEM Eventlog Entry (C1): 

State DeAsserted 


eAsserted 


State Asserted 






eDeAsserted 


State DeAsserted 


eAsserted 


State Asserted 











wfmRSBS2ConsecutiveIllegal 

RemoteManagementLogins 

RSB S2: Consecutive illegal 

remote management logins 

wfmRSBS2RemoteManagemen 

tUserLogin 

RSB S2: Remote management 

user login 


tUserLogout 


user logout 


Specific 

Level of 

importance 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

v 

%s 

%s 

%s 

%s 

%s 

%s 

%s 



variable) 


Remarks 

109

110 


TRAP-TYPE/ 

Alarm type 


tUserAutologout 


user auto-logout 


tUserConnectionLost 


user connection lost 


tUserDialbackFailed 


user dialback failed 

wfmRSBS2IntegratedRemoteA 

ssistantConfigurationResetToD 

efaults 

RSB S2: Integrated Remote 

Assistant configuration reset to 

defaults 

wfmRemoteMgrLoginFailed 

Remote mgr login failed 

wfmRSBS2RemoteinitiatedCtrl 

AltDel 

RSB S2: Remote-initiated 

 

wfmRemoteMgrLogoutFailed 

Remote mgr logout failed 

wfmRSBS2RemoteinitiatedRes 

et 

RSB S2: Remote-initiated reset 

wfmRSBS2RemoteinitiatedPo 

werCycle 


power cycle 


werDown 


power down 


werUp 


power up 

wfmRSBS2AutomaticPowerSh 

utdownDueToCriticalCondition 

RSB S2: Automatic power 

shutdown due to critical 

condition 

wfmRSBS2FrontPanelPowerD 

own 

RSB S2: Front panel power 

down 


Specific 

Level of 

importance 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 



variable) 

Remarks

TRAP-TYPE/ 

Alarm type 

wfmRSBS2AutomaticGraceful 

Shutdown 

RSB S2: Automatic graceful 

shutdown 

wfmRSBS2RemoteinitiatedGra 

cefulShutdown 


graceful shutdown 


tUserPageModemError 


user page: Modem error 


tUserPageNoConnection 


user page: No connection 


tUserTAPPageNoIDPrompt 


user TAP page: No ID= prompt 


tUserTAPPageNoMessageGoah 

ead 


user TAP page: No message goahead 


tUserTAPPageMessageNotAcc 

epted 


user TAP page: Message not 

accepted 

wfmRSBS2RemoteManagement 

UserEmailNotificationFailed 


user Email notification failed 

wfmRSBS2RemoteCtrlCardMe 

moryDiagStarted 

RSB S2: Remote Ctrl. Card 

Memory diag. started 


moryDiagStoppedOK 


Memory diag. stopped OK 


moryDiagStoppedByUser 


Memory diag. stopped by user 


moryDiagStoppedWithError 


Memory diag. stopped with 

Error 


Specific 

Level of 

importance 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 



variable) 


Remarks 

111

112 


TRAP-TYPE/ 

Alarm type 

wfmRSBS2RemoteCtrlCardSta 

rted 


Started 

wfmRSBS2RemoteCtrlCardInt 

ernalError 


Internal error 

wfmRSBS2RemoteCtrlCardFir 

mwareUpdated 


Firmware updated 

wfmRSBS2RemoteCtrlCardBat 

teryLow 


Battery low 


teryDisconnected 


Battery disconnected 

wfmRSBS2RemoteCtrlCardCo 

nfigSetToDefault 


Config set to default 

wfmRSBS2RemoteCtrlCardIP 

AddressChanged 

RSB S2: Remote Ctrl. Card IP 

Address Changed 


teryDefective 


Battery Defective 


teryTooOld 


Battery Too Old 

wfmRSBS2RemoteCtrlCardCer 

tificateExpiresInDays 


Certificate Expires in Days 

wfmFSCRompilotError 

FSC: Rompilot error 

wfmNoMemIdentInfo 

No memory module ident info 

wfmFSCNonFSCMemoryMod 

uleDetected 

FSC: Non FSC memory module 

detected 

wfmFSCMemoryModuleRepla 

ced 

FSC: Memory module replaced 


Specific 

Level of 

importance 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 


IONAL 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

%s 

14774177 MAJOR %s 



variable) 

Remarks

TRAP-TYPE/ 

Alarm type 

wfmFSCSystemPoweredOnRea 

son 

FSCSystem powered on reason 

wfmFSCNoUsableCPU 

FSC: No usable CPU 

wfmFSCSystemConfigurationD 

ataError 

FSC: System configuration 

Data error 

wfmFSCResourceConflict 

FSC: Resource Conflict 

wfmFSCIRQNotConfigured 

FSC: IRQ not configured 

wfmFSCDeviceNodeAllocation 

Error 

FSC: Device node allocation 

error 

wfmFSCExpansionROMSlotN 

otInitialized 

FSC: Expansion ROM Slot not 

initialized 

wfmFSCFanONRunning 

FSC: Fan ON, running 

wfmFSCFanFailed 

FSC: Fan failed 

wfmFSCFanPrefailure 

FSC: Fan pre-failure 

wfmFSCRedundantFanFailed 

FSC: Redundant fan failed 

wfmFSCFanNotManageable 

FSC: Fan not manageable 

wfmFSCFanNotInstalled 

FSC: Fan not installed 

wfmFSCPowerSupplyNotPrese 

nt 

FSC: Power supply not present 

wfmFSCPowerSupplyOK 

FSC: Power supply OK 

wfmFSCPowerSupplyFailed 

FSC: Power supply Failed 

wfmFSCPowerSupplyACFail 

FSC: Power supply AC fail 

wfmFSCPowerSupplyDCFail 

FSC: Power supply DC fail 

wfmFSCPowerSupplyCritTemp 

FSC: Power supply Crit. Temp. 

wfmFSCPowerSupplyNotMana 

geable 

FSC: Power supply not 

manageable 


Specific 

Level of 

importance 


IONAL 

%s 


14970624 MAJOR %s 

14970785 MAJOR %s 

14970786 MAJOR %s 

14970787 MAJOR %s 

14970788 MAJOR %s 


IONAL 

%s 


15101698 MAJOR %s 

15101699 MAJOR %s 


IONAL 


IONAL 


IONAL 


IONAL 

%s 

%s 

%s 

%s 

15232770 MAJOR %s 


15232772 MAJOR %s 

15232773 MAJOR %s 


IONAL 

%s 



variable) 


Remarks 

113

114 


TRAP-TYPE/ 

Alarm type 

wfmFSCPowerSupplyRedunda 

ncyPresent 

FSC: Power supply redundancy 

present 

wfmFSCPowerSupplyRedunda 

ncyLost 

FSC: Power supply redundancy 

lost 

B.37 EM4513-MIB (unicorn-trap.mib) 

Trap from EM4513-MIB. 

TRAP-TYPE/ 

Alarm type 

swTemperatureOverHeatTrap 

Temperature over heat 


Specific 


IONAL 

%s 

15331072 MAJOR %s 

table: EM4513-MIB Trap (ENTERPRISE : enterprises.259.6.10.39) 

Specific 

Level of 

importance 

Level of 

importance 



variable) 



variable) 

1 CRITICAL Temperature in chasis is too high. 

Remarks 

Remarks

B.38 NET-SNMP-MIB (net-snmp.mib) 

Traps from Linux Net-SNMP. 

TRAP-TYPE/ 

Alarm type 

nsNotifyStart 

The agent has started running. 

nsNotifyShutdown 

The agent is in the process of 

being shut down. 

nsNotifyRestart 

The agent has been restarted. 

table: NET-SNMP-MIB Trap (ENTERPRISE : enterprises.8072.4) 

Specific 

Level of 

importance 

1 INFORMAT 

IONAL 

2 INFORMAT 

IONAL 

3 INFORMAT 

IONAL 



variable) 

An indication that the agent has started 

running. 

An indication that the agent is in the 

process of being shut down. 

An indication that the agent has been 

restarted. 

B.38 NET-SNMP-MIB (net-snmp.mib) 

Remarks 

115


116

ServerView V3.60 

Trap List 

B7FH-3141-01ENZ0-00 

Issued on 

Issued by 

July, 2005 

FUJITSU LIMITED 

The contents of this manual may be revised without prior notice. 

Fujitsu assumes no liability for damages to third party copyrights or other rights 

arising from the use of any information in this manual. 

No part of this manual may be reproduced in any form without the prior written 

permission of Fujitsu.

Serverview Trap List

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?