INSTRUCTIONS FOR USE - Whirlpool Professional

DRAINING RESIDUAL WATERDraining Residual WaterResidual water should be removed:• before moving a washing machine (relocation),• when installing in areas prone to frost and• before removing the filter.1.Before emptying the residual water, switch theappliance off and unplug it from the mains socket. Makesure that the water has cooled before draining.2.Turn the slot through 180° by means of a coin, so thatthe dot points to the open lock. The cover bends downto the floor.3.Remove the hose, place a low container underneath andpull the cap from the hose.4.Drain the residual water until no more flows out. Thenclose the residual water emptying hose.5.Put the hose in the cover, fold the cover up and close thecover using a coin. The dot points to the closed lock.6.Pour about 1 l of water into the detergent dispenser toreactivate the ecosystem. You must also plug the mainsplug back into the socket-outlet.7.Now you can fill the washing machine and run thedesired programme.2/535