INSTRUCTIONS FOR USE - Whirlpool Professional

INSTALLATIONRemove the transit bolts1.Slacken the four bolts with the spanner supplied.2.Unscrew the bolt by hand.3.Grip the bolt and remove it through the large aperture.4.Seal the resulting holes using the plastic caps supplied.To do this, insert the caps in the wide part of the holein the direction of the arrow and push them into thenarrow groove until they click into place.5.Keep the transit bolts for future use.• Whenever the appliance is transported, the transit boltsmust be refitted:1.Raise the plastic covers with a screwdriver, slide themin the opposite direction of the arrow and remove.2.Insert the transit bolts in the reverse order.