sun vials

82SAMPLE PREPColor Code ID SystemTitan 2’s color-codeID System permitseasy identification ofmembrane type andporosity. Our uniquesealing ring is codedfor membrane type(i.e., Nylon, PTFE, PVDF,etc.) and porosity(i.e., 0.45µm, 0.2µm,5.0µm, etc.) for instantvisual verification.The Titan Systemgoes beyond the filteritself and includesour re-usable, rigid,transparent, colorcodedcontainers.Now maintain aproper inventory ofthe filter you need at amoments glance.Titan2 FILTERS ARE QUALITY MONITORED FOR:● Low UV Extractable for Superior Results in Spectrophotometric orHPLC Procedures● All Critical Filter Specifications are Tested and Confirmed for Bubble Point,Burst Pressure, Membrane Retention/Exclusion, Flow Rate, UV Extractables● Retention Samples Kept for Six Months on All Lot Production Permits SUN-SRito Validate and Assist in Solving YOUR Problem● Actual HPLC Performance and Reproducibility Validation by a Standard TestMixture Runw w w. S U N - S R i . c o m | 1 . 8 0 0 . 5 2 2 . 8 4 2 5COLOR CODEDLight GreenCellulose Acetate 0.20µmTransp. OrangeCellulose Acetate 0.45µmOrangeGlass Microfiber 1.2µmAmberGlass Microfiber 0.7µmDark PurpleGlass Microfiber 3.1µmLight PurpleNylon 0.20µmTransp. GreenNylon 0.45µmWhiteNylon 0.45µm no prefilterOpaque Med. YellowNylon 1.5µmPinkNylon 5.0µmRoyal BluePolypropylene 0.20µmDk. GrayPolyEther Sulfone 0.20µmOrange-YellowPolyEther Sulfone 0.45µmTransp. BluePTFE 0.20µmTransp. YellowPTFE 0.45µmNavy BluePTFE 1.0µmRedPVDF 0.45µmGraniteReg. Cellulose 0.20µmBLACKPVDF 0.2µmLight BrownReg. Cellulose 0.45µm