sun vials

SUN VIALS31Closures for 10-425 Screw Thread Vials• High quality polypropylene open top closures fit all SUN-SRi 10-425 screwthread vials• Molded flange allows these vials to be suspended from the cap for use in Shimadzuand Hitachi autosamplers• Pre-assembled septa reduce the risk of contamination during sample preparation• Pre-slit septum allow for vacuum release in applications where more than half of thevial contents will be removed• Integral septum cap is an economical choice for routine HPLC applications• Caps with bonded septa resist dislodging during injection when using largediameter blunt needles• Solid top cap is suitable for sample storage• Closures are shipped in sealed polybags to prevent contamination during transportCatalog No. Description Cap color Septum Pre-slit Thickness Qty503 014 Flanged Cap black Red PTFE/White Silicone No 0.060” 100/PK500 067 Flanged Cap Black Tan PTFE/White Silicone No 0.060” 100/PK501 067 Flanged Cap Black Tan PTFE/White Silicone No 0.060” 1000/CS500 063 Flanged Cap Black Tan PTFE/White Silicone Yes 0.060” 100/PK500 561 Flanged Cap Black Bonded Red PTFE/White Silicone No 0.040” 100/PK500 362 Flanged Cap Black Bonded Red PTFE/White Silicone Yes 0.040” 100/PK500 398 Flanged Cap Black Bonded White Virgin PTFE No 0.010” 100/PK501 357 Integral Septum Cap Natural Integral Polypropylene No 0.005” 100/PK501 358 Solid Top Urethane Cap White PTFE/PE Foam Liner No 0.040” 100/PK10mm Caps with Inserted Septa 500 398500 357 501 358w w w. S U N - S R i . c o m | 1 . 8 0 0 . 5 2 2 . 8 4 2 5