116TECHNICAL INFORMATIONTerms and ConditionsCopyright © 2008 SUN-SRi. All rights reserved.This catalog, including any portion hereof, may not be reproduced inany manner whatsoever without the prior express, written consent ofSUN-SRi or its parent company.The information presented in this catalog is, to the best of ourknowledge, correct and accurate at the time of publication, butis not guaranteed to be so. SUN-SRi and its affiliates assume noresponsibility in this respect, and reserve the right to change productspecifications without notice.Terms and Conditions of SaleGeneralAll orders are accepted and executed by SUN-SRi pursuant to SUN-SRi terms and conditions of sale in effect at the time the order isplaced and accepted by SUN-SRi. The terms and conditions of saleare only as stated herein and constitute the complete agreementbetween the parties.Modification of TermsThe Agreement may not be altered, supplemented, or amendedunless set forth in a written agreement signed by both the Purchaserand SUN-SRi or its parent company. Any addition to or deviation fromthese Terms and Conditions of Sale, including by the use of any otherdocument(s), shall only be binding upon SUN-SRi if expressly agreedto by an authorized representative or agent of SUN-SRi in writing.QuotationsOrders are not binding until accepted by SUN-SRI. SUN-SRi reservesthe right to refuse the Purchaser’s acceptance of a quotation unlessit is accepted during the period stated for the quotation. SUN-SRireserves the right to modify or withdraw a quotation at its reasonablediscretion.s and DiscountsThe s published in this catalog are those in effect on the date ofpublication and are subject to alteration without notice. All s andcurrency transactions are in US dollars.New AccountsSUN-SRi reserves the right to extend or deny credit to any Purchaserat its sole discretion. A commercial bank and several financialreferences may be required for the purpose of establishing a creditaccount. Products will not be delivered prior to the completion ofcredit verification and account authorization.Special PackingA charge is made when it is necessary to dispatch goods in cratesor cases, but this amount will be credited in full on the return, withinone month, of the crates or cases in good condition carriage paid. Nocharge is made for any other form of packing and no credit will beallowed for its return.DeliveryUnless otherwise agreed by the parties, goods are delivered ExWorks (Incoterms 2000) Rockwood, TN, U.S.A. s are exclusive of anyshipping and handling fees, duty, insurance, taxes, and VAT, whichthe Purchaser agrees to pay. The Purchaser shall be obliged tocooperate in the delivery of the Products ordered and to take receiptof same. SUN-SRi may retain any goods refused or not accepted bythe Purchaser at the latter party’s disposal for account and at therisk of the Purchaser.All delivery times shall be approximate, except if a fixed timeof delivery has been specifically agreed to in writing by SUN-SRi inwhich case a delay in the delivery shall solely entitle the Purchaserto cancel, without costs, the order for the goods not delivered. Otherdelivery terms may incur additional charges.Any times quoted for dispatch, delivery, repair, or replacement areto be treated as estimates only and SUN-SRi and its affiliates shall notbe liable in any way whatsoever for failure to dispatch, deliver, repair,or replace within such time.Loss or Damage in TransitClear receipts should be given only if goods have been examined,as an unqualified signature may react to the disadvantage of thePurchaser if the consignment should become the subject of a claim.In the event of short delivery or damage in transit, it is essential thatSUN-SRi’s dispatching depot be advised within two days of receiptof goods.The following details should be sent in writing to SUN-SRi:Advice note numberCarrier’s nameCondition of packageDate of consignment receivedExtent of damage or shortageIn the event of non-delivery, SUN-SRi’s dispatching depot should beadvised within seven (7) days of the date of invoice. SUN-SRi and itsaffiliates will not be responsible for goods lost or damaged in transitunless the above conditions are observed.PaymentWhere credit has been approved by SUN-SRi, unless otherwise agreedby SUN-SRi in writing, payment is due within 30 days following thedate of invoice. s are net and are not subject to any early paymentdiscount or settlement terms.The Purchaser may not claim any set-off against SUN-SRi or itsaffiliates. In the event payment is not made when due, SUN-SRi shallbe entitled to claim, without any notice of default being required andwithout prejudice to any further rights it may have, interest at thelesser of: a rate of one and a half percent (11/2%) per month or atthe highest interest rate allowed by law. Purchaser shall be liable forall costs of collection.Special OrdersAll orders for non-standard products or package quantities notincluded in current SUN-SRi Company catalogs and literature areconsidered to be special orders and will be handled on a case bycase basis at the discretion of SUN-SRi.Manufacture and DesignSUN-SRi reserves the right to discontinue the manufacture of, or tochange or modify the design or construction of the products sold,without incurring any obligation to Purchaser. All photographs,illustrations, descriptions, specifications, drawings, and particulars ofweights and dimensions issued by SUN-SRi are approximate only,and are intended only to present a general idea of the goods to whichthey refer and shall not form part of a contract.Patent IndemnityIf a product furnished to Purchaser becomes or, in SUN-SRi’sopinion, may become the subject of any claim, suit or proceeding forinfringement of any United States patent, SUN-SRi may at its optionand expense (i) obtain for Purchaser the right to use, lease or sellthe product, (ii) replace the product, (iii) modify the product, or (iv)remove the product and refund the purchase paid by Purchaser lessa reasonable amount for use, damage or obsolescence. SUN-SRi andits affiliates will not be liable for any infringement arising from thecombination of products or from the use of a product in a processSUN-SRi’s total liability to Purchaser will not, under anycircumstances exceed the purchase paid for the allegedly infringingproduct. Purchaser agrees, at its expense, to protect and defendSUN-SRi against any claim of patent infringement arising fromcompliance with Purchaser’s designs, specifications or instructionsand to hold SUN-SRi harmless from damages, costs and expensesattributable to any such claim.Applicable Law and VenueThis Agreement shall be governed in accordance with the laws ofthe State of Delaware (USA) without reference to any conflict of lawprovisions. Unless the parties agree otherwise, the state and federalcourts located in Pennsylvania shall have exclusive jurisdiction overall disputes hereunder. The parties agree the UN Convention onContracts for the International Sale of Goods (CISG) shall not applyto the sale of goods hereunder. No failure or delay by SUN-SRi inexercising any right, power or privilege hereunder will operate asa waiver thereof nor will any single or partial exercise of any right,power or privilege hereunder preclude further exercise of the sameright, power or privilege. In the event any provision or any part orportion of any provision of these Terms and Conditions shall be heldto be invalid, void or otherwise unenforceable, such holding shall notaffect the remaining part or portions of that provision, or any otherprovision hereof.Compliance with Law and Export Regulations.You agree to comply with all applicable local, federal, state, county,and municipal statutes, laws, regulations, codes, standards,ordinances and orders and to the laws of the United States.Declarations, fees and taxes resulting from resale or export of theseproducts are the sole responsibility of the Purchaser. If the productsare to be exported, the quoted shipping dates are subject to receiptof all export documents and authorizations. Unless otherwise statedin writing, the s quoted are based on packing for domestic shipment,regardless of ultimate destination. Purchaser agrees to provideSUN-SRi in writing with the ultimate destination and the identity ofthe end-user prior to shipment and shall comply with all applicablelaws and regulations in the transfer, export or re-export of product(s)obtained from SUN-SRi.WarrantySUN-SRi warrants its products to be materially free of defects inworkmanship and material for one year (12 months) from the date ofpurchase. For parts or components not of the SUN-SRi’s manufacture,SUN-SRi will give the Purchaser a warranty equivalent to the warranty(if any) that SUN-SRi may have received from the supplier of suchparts or components in respect thereof but not to impose on SUN-SRior its affiliates a liability greater than that imposed on it by the 12-month warranty period set forth herein.SUN-SRi does not warrant any products for any specific purposeand products are not intended for in-vivo use. It is the responsibility of thePurchaser to assure that the product is suitable for the intended use.EXCEPT AS EXPRESSLY SET FORTH IN THESE TERMS ANDCONDITIONS, SUN-SRi DISCLAIMS ALL WARRANTIES,EXPRESS, IMPLIED OR STATUTORY, SUCH AS WARRANTIESOF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULARPURPOSE. SUN-SRi DISCLAIMS ALL WARRANTIES REGARDING ANYANCILLARY SERVICES RENDERED. IN NO EVENT DOES SUN-SRiMAKE ANY WARRANTY OF ITS PRODUCT FOR USE IN LIFE SUPPORTEQUIPMENT.LIMITATION OF DAMAGES.IN NO EVENT SHALL SUN-SRi OR ITS AFFILIATES BE LIABLE, INCONTRACT, TORT, STRICT LIABILITY, LAWS RELATING TO THEPROTECTION OF THE ENVIRONMENT, OR UNDER ANY OTHER LEGALTHEORY, FOR INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIALDAMAGES, REGARDLESS OF WHETHER IT WAS INFORMEDABOUT THE POSSIBILITY OF SUCH DAMAGES, AND IN NO EVENTSHALL SUN-SRi’S LIABILITY EXCEED AN AMOUNT EQUAL TO THESALES .Defective MerchandiseSUN-SRi will repair or replace, at SUN-SRi’s option, any defects, whichunder proper use, appear in the goods within the Warranty period setforth herein and which arise solely from faulty design, materials orworkmanship; provided that no complaints shall be admissible unlesssubmitted in writing to SUN-SRi within five (5) days after the timeof discovery of the defect or after the time the defect should havebeen discovered, whichever time comes first, it being understood thatthe Purchaser shall take reasonable care to discover any defect ofwhatever nature as soon as possible after taking delivery.Product ReturnsGoods may not be returned except for justified warranty claims.Any such returns must be authorized by SUN-SRi in advance bythe issuance of a Returned Materials Authorization (RMA) numberfrom SUN-SRi. Unauthorized returns will be refused. The RMAnumber must be prominently displayed on the outermost shippingcontainer when product is returned. SUN-SRi must receive goodsapproved for return within 30 (thirty) days of the issuance of the RMAauthorizationA handling charge of not more than 20 percent of the invoicevalue of the returned goods may be assessed where it is establishedthat the reason for the return is not through any error on the partof SUN-SRi. SUN-SRi reserves the right to refuse the return ofany product that has been used with infectious, microbiological,or radioactive substances or other materials that may be deemedhazardous to the employees of SUN-SRi.w w w. S U N - S R i . c o m | 1 . 8 0 0 . 5 2 2 . 8 4 2 5
ALPHABETICAL INDEX117Aluminum Crimp CapsPage No.8mm 4011mm 6, 9, 1320mm 43, 44Crimp Top VialsPage No.8mm Microsampling 4011mm Standard Opening 811mm Wide Opening 3, 11StepVial 11mm 2Dry Vials 11mm 10PTFE 11mm 11DissolutionPage No.Flasks 99Filter Tips 100SunFlo Filters 99Testing Cannulae 98Vessels 98FiltrationPage No.Centrifugal Filters 92Disk Filters 93TITAN2 Syringe Filters 82 to 90Hot Shot Filtration System 91GC Injection Port SeptaPage No.ChromSeal 109 to 111SUN Ultra 108General GlasswarePage No.Culture Tubes 105Plastic Transfer & Pasteur Pipets 104Volumetric Flasks 102Volumetric Pipets 102 to 103Inserts forPage No.8x40 Shell Vials 3815x45mm 4mL Vials 34Standard Opening Vials 8, 21StepVial Crimp 2StepVial11 Screw 16Wide Opening Snap/Crimp Vials 4,12Wide Opening 9mm Screw Thread Vials 26Wide Opening 10-425 Screw Thread Vials 30KitsPage No.8-425 Standard Opening Screw Thread 249-425 Plastic Vial 26Kits (Con’t)Page No.9-425 StepVial ll 1910-425 Wide Opening Screw Thread 3313-425, 15x45mm 4mL Vial 37Headspace Crimp Round Bottom 47Headspace Crimp Flat Bottom 48Headspace Magnetic Crimp & Screw 49Shell Vials 8x40mm 38Shell Vials 12x32mm 39Shell Vials 15x45mm 39Snap/Crimp Vial Kits 11mm 7Standard Opening Crimp 11mm 10Ultra High Recovery Vials 55VOA 57WebSeal Micro Plate Kits 64Wide Opening Crimp 11mm 14Micro Plates & CoversPage No.MicroMat CLR 65MicroMat Covers & Strips 66Micro Plates 68, 69Plate+ Glass Coated Micro Plate 67WebSeal Vial, Plate & Mat Kits 64WebSeal PTFE/Silicone Covers 65Microsampling VialsPage No.8mm Microsampling 40Shell VialsPage No.Shell Vials 8x40mm 38Shell Vials 12x32mm 39Shell Vials 15x45mm 39Screw CapsPage No.Empty 8-425 Thread 23Empty 9-425 Thread 18, 27Empty 10-425 Thread 32Empty 13-425 Thread 36Empty High Recovery Vial Caps 548-425 Thread Assembled 229-425 StepVial ll Thread Assembled 179-425 Thread Assembled 2810-425 Thread Assembled 3113-425 Thread Assembled 3518-425 Thread Assembled - Headspace 46High Recovery Vial Caps Assembled 5424-400 for VOA Vials 56Solid Top for Storage Vials 58Phenolic Caps for Culture Tubes 105w w w. S U N - S R i . c o m | 1 . 8 0 0 . 5 2 2 . 8 4 2 5
Change language