TMB Sales Policy - Tmb.com

TMB Sales PolicyEntertainment Production and StagingTechnologyTMB sells at discounted prices to companieswho are investing in entertainment productionand staging technology to generate directprofit, as a primary part of their business,through either resale or rental. This includesrental companies, dealers and OEMs.TMB quotes entertainment production andstaging technology at full published listprices to all others, including clubs, theatres,individuals, as well as religious, educational andpublic institutions. Wherever possible we referall such customers to our TMB dealers.

Audio Snake CableMulti-pair 24 AWG stranded oxygen free bare copper, Polypropyleneinsulated, each pair individually shielded and PVC jacketed, withoverall PVC or TPE jacket.Part Number PC12PRT PC20PRP PC58PRTNo. of Pairs 12 20 58Weight 178 lb/mft 300 lb/mft 790 lb/mftConductorsSize and Stranding24 AWG 7 strands 32 AWGMaterialBare annealed oxygen free copperMaterialPolypropyleneWall Thickness .008” nom. .010” nom.Insulation Diameter.044” nom.Color CodeEach pair black with white, pair jackets gray with number identification printed in blackink (1- ONE..)Lay Length1 1/2” nom. LHLPair Assembly ShieldAluminum/polyester tapeDrain24 AWG 7/32 tinned copper drain wireMaterial White polyvinyl chloride Gray polyvinyl chloridePair Jacket Wall Thickness .011” nom. .015” nom.Diameter .107” nom. .123” nom.CableAssemblyLay LengthFillersSeparator3 Pairs - 5” RHL,9 Pairs - 7” LHL9” 15”Black PVC as required.001” Paper tape applied helically• Cable is RoHS compliant• TMB UK and Canada cable assemblies RoHS compliant• TMB US cable assemblies RoHS compliant by request

Part Number PC12PRT PC20PRP PC58PRTNo. of Pairs 12 20 58JacketMarkingsListingsElectricalSpecificationsMaterialFlame retardant andsunlight resistant matte60°C PVCMatte ThermoplasticelastomerFlame retardant andsunlight resistant matte60°C PVCOverall Diameter 0.535” 0.755” 1.205”ColorTypeLegendUnderwritersLaboratoriesAdditional CertificationsCapacitance @ 1 kHzCharacteristicImpedanceResistance @ 20° CVelocity of PropagationTMB PROCABLE PC12PRT24 AWG CERTIFIED ETP12CHANNEL PROFESSIONALLOW-CAPACITANCEBALANCED CABLEBlackSurface printing in white inkTMB PROCABLE PC20PRP24 AWG CERTIFIED OFC 20CHANNEL PROFESSIONALLOW-CAPACITANCEBALANCED CABLETMB PROCABLE PC58PRP24 AWG CERTIFIED OFC 58CHANNEL PROFESSIONALLOW-CAPACITANCEBALANCED CABLEListed National Electric Code type CL2 for use in accordance with NEC articles 640,520, and 725 for audio and sound recording equipment for general use without conduitexcept in risers and plenums.UL listed to meet CSA C22.2 No. 0.3-M-1985 Vertical Flame Test - Cables in Cable Trays”flame test denoted as “FT4”27 pF/ft. Between25 pF/ft. Between conductorsconductors45 pF/ft. Conductor to45 pF/ft. Conductor to shieldshield55 ohms nom. 60 ohms nom.24.5 ohms/1000 ft.66% nom.LITPCASNKA4-122712

Console StandsThe Go-Anywhere, All-Purpose Standsfor Sound and Lighting Consoles• A real time-saver and back-saver.• More stable, improved design.• Can safely tilt and supportconsoles up to 1,760 lbs.• Heavy-duty, lightweightaluminium construction.• Easy to carry, collapsible design.Fitted black skirt kitavailable separatelySpecificationsCapacity 1,760 lbs 800 kgWeight 29 lbs 13 kgHeight 28.5” 724 mmLength 48.875” 1,241 mmWidth 36” 914 mmLITEZTILTA4-030812

Microphone CablePCMIC202 conductors 20AWG stranded bare copper, polyethylene insulated, overall braidshielded, PVC jacketed microphone cable.1. Conductor1.1 AWG Size and Stranding: 20 AWG 41 strands 36 AWG1.2 Material: Bare annealed copper2. Insulation2.1 Material: Polyethylene2.2 Wall Thickness: .020” nominal2.3 Diameter: .078” +/- .002”3. Color Code3.1 Code: Black and white4. Assembly4.1 Lay Length: 2 1/2” maximum left hand4.2 Fillers: PVC as required5. Shield5.1 Material: Bare annealed copper braid5.2 Coverage: 85% nominal6. Jacket6.1 Material: Matte finish polyvinyl chloride, color as specified6.2 Colors: Black, blue, and red6.3 Wall Thickness: .040” nominal6.4 Diameter: .260 +/- .005”7. Markings7.1 Type: Surface printing in white ink7.2 Legend: PROCABLE AUDIO PROFESSIONAL BRAIDED SHIELD BALANCEDMICROPHONE CABLE, MADE IN USA8. Electrical Specifications8.1 Capacitance Between Conductors: 21 pF/ft @ 1 kHz8.2 Capacitance Conductor to Shield: 37 pF/ft @ 1 kHz8.3 Characteristic Impedance: 70 ohms @ 1 MHz8.4 Resistance at 20C: 10.3 ohms/1000 ft.9. Physical9.1 Weight per 1000’: 50lbs.9.2 Stock Length - Black: 500’, 1000’ plastic spool in box. 2500’ plywood spool.9.3 Stock Length - Colors: 1000’ plywood spool• Cable is RoHS compliant• TMB UK and Canada cable assemblies RoHS compliant• TMB US cable assemblies RoHS compliant by requestLITPCAMICA4-122712

PS176 Audio SnakeMASS Connectors• Outstanding multipin connector reliability.• Rugged metal shell protects against moisture and physical abuse.• Heavy-duty dust cap. Inline version includes strain relief.• Hermaphroditic design means reduced inventory of parts.• Every connector has equal number of pins and sockets. Only one model ofchassis and inline connector for each end without the usual male/femaleconnector designations.• Inline and chassis mount versions are fully compatible with all other176-pin hermaphroditic MASS connectors in the industry.

PS176 Audio SnakeConnectors1.70 WITH DUST CAP IN PLACE.25 1.301.14Ø .281THRU4 PLSØ .25Ø 2.875Ø 3.00SASH CHAIN 8” LONG2.652 2 PLS3.25 2 PLS2.652 2 PLSRecommended Panel Cutout3.684.32 WITH DUST CAP IN PLACEMATERIALS AND FINISHESØ 2.501.94SASH CHAIN 8” LONGØ 3.02ContactsInsulatorsO-Rings and SealsShells and CoversChain and HardwareCopper alloy, hard gold perMIL-G-45204, over nickelper QQ-N-290Thermoplastic ElastomerThermoplastic ElastomerAluminum alloy, hard blackanodized per MIL-A-8625Stainless steelMECHANICAL DATAOperating TemperatureContactsContact RetentionConnector Engagementand Separation ForcesPolorization-40 deg C to +105 deg C-40 deg F to +221 deg F20 ga. solder type20 lbs. minimum50 lbs. maximumHermaphroditicELECTRICAL DATAContact RatingOperating VoltageInsulation ResistanceContact Resistance7.5 Amps500 VDC or 400 VAC RMSmaximum2500 MOhm minimum6 mOhm maximumLITPS176A4-052912

Microphone CableEconomical, Professional-Grade Mic Cable2 conductors 24 AWG stranded bare copper,polypropylene insulated, overall serveshielded, PVC jacketed microphone cable.Available fully assembled in retail packagingwith Neutrik ® or generic XLR connectors.SPECIFICATIONSPart numberWDPMIC24AWG Size andConductor Stranding24 AWG 16 strands 36 AWGMaterial Bare annealed copperMaterial PolypropyleneInsulationWall Thickness 0.013” nom.Diameter 0.050” +/- 0.002”Color Code Blue paired with redAssemblyLay Length 1 3/4” maximum left handFillersJute as requiredShieldMaterial Bare annealed copper serveCoverage 95% nom.MaterialMatte black finish polyvinylchlorideJacketWall Thickness 0.055” nom.Diameter 0.230” +/- 0.005”TypeSurface printing in white ink(blue on white jacket)MarkingsLegendSTARCABLE WDPMIC2424 AWG PROFESSIONALLOW CAPACITANCE 1 PAIRMICROPHONE CABLECapacitance21 pF/ft @ 1 kHz BetweenConductorsElectrical37 pF/ft @ 1 kHz Conductor toShieldCharacteristicImpedance70 ohms @ 1 MHzResistance 23 ohms/1000 ft. at 20°CPhysicalWeight 31 lbs. per 1000’Stock Length5000’ plywood spoolLITSTARMICA4-122712

PORTABLE DATA ANDCOLOR CHANGER CABLESHigh quality, economical data cables designed for entertainment industryapplications. Specifications ETL verified for DMX data transmission.WDP222TWDP224TWDPCCT• Flexible construction.• Durable, flame retardant matte black PVC jacket.• Foamed Polyethylene insulation for optimum data transmission.• 22AWG twisted data pair, tinned copper.• 14AWG power pair pair, tinned copper. (WDPCCT)• 22AWG drain wire, tinned copper. (N/A WDPCCT)• Aluminum/mylar shield on data pair, 100% coverage.• Fully tested.• Cable is RoHS compliant• TMB UK and Canada cable assemblies RoHS compliant• TMB US cable assemblies RoHS compliant by request

SPECIFICATIONSConductorsInsulationMaterialWDP222T16/0.2mm [22AWG] strandedtinned copperWDP224T16/0.2mm [22AWG] strandedtinned copperCopper Resistance 34.9 Ohm / km Nom. 34.9 Ohm / km Nom.MaterialFoamed polyethylene, colorcoded pairs Red/BlueFoamed polyethylene, colorcoded pairs Red/Blue, White/GreenWall Thickness 0.415mm [0.016”] 0.415mm [0.016”]Overall Diameter 1.8mm [0.0702”] 1.8mm [0.0702”]Tensile Strength25mm/min.Elongation 25mm/min.Dielectric Constant[1mHz]Dissipation Factor[1mHz]11mpa IEC811-1-111mpa IEC811-1-1500% IEC811-1-1 500% IEC811-1-12.31 IEC250 2.31 IEC2500.0005 IEC250 0.0005 IEC250Working Voltage 30 30Test Voltage 500 500AssemblyShieldDrainJacketPhysicalMaterialWall ThicknessTensile StrengthElongationSpecific GravityShore ‘A’ HardnessThermal Stability2 cores [1 twisted pair] cabledwith cotton fillersOverall polyester film wrapAluminum/mylar foil lapped, 100% coverage16/0.2mm [22AWG] stranded tinned copper4 cores [2 twisted pairs] cabledwith cotton fillersOverall polyester film wrapSoft Polyvinylchloride, matte black [RAL 9005], pressure extruded0.90mm +/- 0.05mm[0.035”+/-0.002”]1.30mm +/- 0.05mm[0.0507” +/- 0.002”]11.7 n/sqmm Nom. @ break320% Nom. @ break1.35 +/- 0.04 g/cc61 @ 15 seconds60 min. @ 200° COxygen Index 23%Overall Diameter5.2mm +/- 0.2mm [0.203” +/-0.0079”]8.3mm +/- 0.2mm [0.324” +/-0.0079”]Weight 36 kg/km [24.2 lb/1000’] Approx. 84 kg/km [56.5 lb/1000’] Approx.Temperature -40° C to +80° C -40° C to +80° CConductorsInsulationShieldJacketPhysicalElectricalData Pair19/0.16mm[22AWG] strandedtinned copperWDPCCTPower Pair19/0.36mm[14AWG] strandedtinned copperMaterial PE compound FR−PE compoundOverallDiameter2.3 mm nom. 2.3 mm nom.Color Code Green / Red Black / WhiteMaterialColorWall ThicknessMarkingOverallDiameterWeightBend RadiusTemperatureFlame TestDC LoopResistanceCapacitanceImpedanceAttenuationVoltage RateAluminum foil,metal face in,100% coverage.NoneFR−PVCBlack0.8 mm nom.DATAPLEX WDPCCT DIGITALSCROLLER CABLE VW-1 CE 05181METER 1036800/141020110.0 Ω/Km max.@ 20° C40 pF/m nom.120 Ω nom. @ 1MHz.0.57 dB/100m @100 KHz max.0.83 dB/100m @200 KHz max.1.30 dB/100m @500 KHz max.2.20 dB/100m @1 Mhz max.7.5 mm nom.85 Kg/Km nom.72 mm min.-20° C to +70° CUL 1581 VW−123.0 Ω/Km max.@ 20° C300 Vrms.ElectricalCharacteristicImpedance76.3 Ohm @ 250 mHz 99.4 Ohm @ 250 mHzDC Resistance 1.0758 Ohm / 100m 1.0863 Ohm / 100mAttenuation - 35.1 db Near End 8.0 db Near EndMutualCapacitance57.7 pF Conductor to Shield 38.0 pF Conductor to ShieldSTANDARDS CE directive 72/23 EEC, IEC332 Part 1LITDATAPLEXA4-122712

CUSTOM UNDERWATER CABLES CONFIGUREDFOR YOUR SPECIFIC APPLICATION.• As used by the world's top water shows• Precision electrical and physical properties• Cables can be designed for the installation's specific water chemistry• Composite, data, video, fiber, power – including extended length GFCI runs• Can be UL Listed in accordance to UL Subject 83 and NEC Article 680• Environmentally Safe – Nontoxic – Recyclable• Temperature rated to 90°C• Cable is RoHS compliant• TMB UK and Canada cable assemblies RoHS compliant• TMB US cable assemblies RoHS compliant by request

PART NUMBER PCAQ103** PCAQ122S** PCAQ128** PCAQ163** PCAQ224UL**APPLICATIONDESCRIPTIONPower cable designed for longGFCI runs1 Pair + 1 conductor 10 AWG(6 mm 2 ) stranded bare copper,TPR insulated, pair foil andbraid shielded, overall TPRjacketed underwater lightingcable.Power cable designed for longGFCI runs2 conductor 12 AWG (4 mm 2 )stranded bare copper, TPRinsulated, overall foil andbraid shielded, TPR jacketedunderwater lighting cable.Low voltage power cable Fixture cable DMX cable8 conductor 12 AWG (4 mm 2 )stranded bare copper, TPRinsulated, unshielded, overallTPR jacketed under waterlighting cable3 conductor 16 AWG (1.5 mm 2 )stranded bare copper, TPRinsulated, unshielded, overallTPR jacketed under waterlighting cable2 pair 22 AWG (0.34 mm 2 )stranded tinned copper, foamHDPE insulated, cabled withKevlar strength member,overall shielded and TPRjacket, 110 Ohm impedance.CHEMICALRESISTANCEDesigned to withstand constant submersion in water with various chemical compositions per customer specifications.MaterialCustom Thermoplastic elastomer (TPR)Wall Thickness 0.095” (2.41 mm) nom. 0.095” (2.41 mm) nom. 0.095” (2.41 mm) nom. 0.060” (1.52 mm) nom. 0.040” (1 mm) nom.JACKETDiameterColor0.865” (21.97 mm) +/- 0.015”(0.38 mm)0.580” (14.73 mm) +/- 0.015”(0.38 mm)0.805” (20.45 mm) 0.395” (10.03 mm) 0.320” (8.13 mm) nom.BlackINSULATIONMaterialCustom Thermoplasticelastomer (TPR)Custom Thermoplasticelastomer (TPR)Custom Thermoplasticelastomer (TPR)Custom Thermoplasticelastomer (TPR)Custom foam high densitypolyethyleneWall thickness 0.045” (1.14 mm) nom. 0.045” (1.14 mm) nom. 0.045” (1.14 mm) nom. 0.030” (0.76 mm) nom. 0.016” (0.41 mm) nom.Diameter 0.214” (5.44 mm) Nom. 0.181” (4.6 mm) nom. 0.183” (4.65 mm) nom. 0.123” (3.12 mm) nom. 0.064” (1.63 mm) nom.COLOR CODEBlack and White pair, greensingle conductorBlack and WhiteBlack, White, Red, Green,Orange, Blue (ICEA method1 K-1)Black, White, GreenBlack/White, Red/GreenCONDUCTORSPAIRASSEMBLYSHIELDCABLE ASSEMBLYMARKINGSSize /Stranding10 AWG (6 mm 2 ), 105 strand30 AWG12 AWG (4 mm 2 ) 65 strands30 AWG12 AWG (4 mm 2 ) 65 strands30 AWG16 AWG (1.5 mm 2 ) 26 strands30 AWG22 AWG (0.34 mm 2 ) 19 strands34 AWGMaterial Bare annealed copper Bare annealed copper Bare annealed copper Bare annealed copper Tin plated annealed copperLay Length 4” (101 mm) nominal left hand 1.5” (38 mm) nominal left handFillersNon-hygroscopicpolypropyleneType Individual pair shields Overall OverallInner LayerDrainOuter LayerAluminum/polyester tapeapplied with aluminum sideout and 25% overlap, 100%coverage12 AWG (4 mm 2 ) 65/30 tinnedcopper36 AWG tinned copper braid,90% coverageAluminum/polyester tapeapplied with aluminum sideout and 25% overlap, 100%coverage14 AWG (2.5 mm 2 ) 41/30tinned copper36 AWG tinned copper braid,90% coverageAluminum/polyester tapeapplied with aluminum sideout and 20% overlap, 100%coverage22 AWG (0.34 mm 2 ) 19 strands34 AWG tinned copper36 AWG tin plated annealedcopper braid, 75% coverageLay Length 10” (254 mm) nominal left hand 4” (101 mm) nominal left hand 9” (229 mm) nominal left hand 2.5” (64 mm) nominal left hand 3” (76 mm) nominal left handFillersBinderTypeLegend0.001” (0.03 mm) clearpolyester tape applied with25% overlapPer customer requirementsTMB PCAQ122S** 2/C 12AWG SEW (UL) 105C (-40C)SHIELDED 600V E179657Non-Hygroscopic polypropylene0.001” (0.03 mm) clearpolyester tape applied with25% overlapIndent print8/C 12 AWG SEW 105C(-40C) 600V E179657 and anycustomer specified markings0.001” (0.03 mm) clearpolyester tape applied with25% overlapTMB PCAQ163** 3/C 16AWG SEW 105C (-40C) 600VE179657Fibrilated polyproylene ininterstices, plus 1500DKevlar strength member in 1interstice.Per customer requirementsSTANDARDSELECTRICAL SPECIFICATIONSUL (Underwriters Laboratories) Listed NEC type SEW shielded flexible cordCapacitance at 1 kHz between conductorsConductor to ShieldCharacteristic ImpedanceInductanceDCR at 20°C13 pF/ft. nom.27 pF/ft. nom110 Ohms @ 1 MHz0.16 uH/ft. nom.15.5 Ohms max.Velocity of Propagation76% nom.Note: ProAqua submersible cables are designed for your specific applications. Part numbers and specs above are examples only, designed for specific projects. Toensure reliability, jacket materials must be precisely matched to intended water chemistryBenign chemicals – natural or otherwise – can erode conventional cables. ProAqua cables are fabricated specifically for wet or fully submersed environments and areresistant to moisture ingress as well as deterioration due to specific water chemistry. TMB offers cables for a wide range of submersible applications, from fresh water tohigh durability marine environment cabling.LITPROAQUAA4-051612

Advanced Matte Black JacketCompound for UltimateProtectionFlexible ConstructionResists Kinking Yet HandlesWell In All ConditionsNumbered ConductorsCorrespond To IndustryStandard 6-CircuitConnector Contact NumberingPC18x1.5, PC18x2.5, and PC12/19Higher quality cable developed specifically forthe distribution of six 1K or 2K lighting circuits inperformance lighting applications. Proven to handlewell in all conditions and withstand many years ofheavy, on-the-road use.

SPECIFICATIONSPC18X1.5 PC18X2.5 PC12/19CROSSSECTION18 x 1.5 mm 2 (16 AWG) 18 x 2.5 mm 2 (14 AWG) 19 x 4 mm 2 (12 AWG)CORES Flexible Plain Copper, as per IEC 228 CL5 Bare Annealed copperINSULATIONASSEMBLYJACKETPVC thermoplastic compound, self extinguishing.17 x black conductors + 1 ground conductor. Coressequentially numbered with white ink every 25 mm.Configuration of cores corresponds to industry standard 19-pin connector contacts.Flame retardant to IEC332-3, CE 20-22 11Working Voltage: 300/500vTest Voltage: 2500vContra-helical lay-up around a central PVC filler.Talc between outer jacket and cores for easy stripping.Matte black pressure extruded PVC thermoplastic compound,self extinguishing. Interstices filled to reduce movement andtwisting of cores.Flame retardant to IEC332-3, CE 20-22 11 Excellent resistenceto most organic and inorganic chemicals.Grey PVC thermoplasticcompound. Conductorssequentially numberedwith white ink every 2”.Numbering to correspondwith ProSeries, KC andSocapex 19-pin contactnumbering.Planetary layup around apolypropylene core. Corestalc coated for flexibility andeasy stripping.Pressure-extruded blackthermoplastic compound(proprietary).MARKINGS18x1.5MM2 300/500V70 DEGREE C CE TMBPROCABLE [indent print]18x2.5MM2 300/500V70 DEGREE C CE TMBPROCABLE [indent print]E... Style 2586 105C 600VAWM 19 COND ...AWG - cAWM I/II A 105C 600V FT1TMB PROCABLEAPPROVALS In accordance with harmonisation standards, CE73/23EEC Per UL 758 and UL 1581STRANDING 30 / 0.25 mm [30/30 AWG] 50 / 0.25 mm [50/30 AWG] 65 / 0.25 mm [65/30 AWG]INSULATIONNOM. WALLJACKETNOM. WALLOUTSIDEDIAMETER0.64 mm [0.025”] .032”2.55 mm [0.1”] .079”16.08 mm [0.627”] 18.5 mm [0.721”] .95”WEIGHT 485 Kg/Km [326 lbs./mft] 800 Kg/Km [538 lbs./mft] 760lbs./mftTEMPERATUREBEND RADIUSPortable usage: minus 5° C / plus 70° CInstallation usage: minus 30° C / plus 70° CPortable usage: 13 x O.D.Installation usage: 7.5 x O.D.----LITPROCABLEA4-062107

Premium Head-To-Ballast assemblies featuringProCable ® HMI cables with Link LKH Connectorsfor ultimate durability and reliable performance.Guaranteed by the industryleader in cable assembly service.Head-To-BallastCablesPart numbers for HMI fixtures by manufacturerManufacturerWattageMale ConnectorMil. SpecFemale ConnectorMil. SpecCable 25 foot 50 footArri575 w1.2 Kw2.5 Kw4 Kw6 Kw12 Kw18 Kw06-24-2-PSCW-P21P006-24-2-PSCW-P21P006-24-2-PSC0-P29P006-24-2-PSC0-P29P001-28-22-PSC0-P29P001-28A-9-PSC0-P36P001-28A-9-PSC0-P36P001-24-2-SSCW-P21P001-24-2-SSCW-P21P001-24-2-SSC0-P29P001-24-2-SSC0-P29P006-28-22-SSC0-P29P006-28A-9-SSC0-P36P006-28A-9-SSC0-P36P0PC167TPC167TPC147TPC127TPC4282123TPC44166TPC44166TZHBARR57525ZHBARR120025ZHBARR250025ZHBARR4K25ZHBARR6K25ZHBARR12K25ZHBARR18K25ZHBARR57550ZHBARR120050ZHBARR250050ZHBARR4K50ZHBARR6K50ZHBARR12K50ZHBARR18K50Cinemills575 w1.2 Kw2.5 Kw4 Kw6 Kw12 Kw18 Kw06-24-2-PSCZ-P21P006-24-2-PSCW-P21P006-24-2-PSC0-P29P006-24-11-PSC0-P29P006-32-68-PSC0-P36P006-28-10-PSC0-P36P006-28-10-PSC0-P36P001-24-2-SSCZ-P21P001-24-2-SSCW-P21P001-24-2-SSC0-P29P001-24-11-SSC0-P29P001-32-68-SSC0-P36P001-28-10-SSC0-P36P001-28-10-SSC0-P36P0PC167TPC167TPC147TPC83126TPC44166TPC4282123TPC4282123TZHBCMC57525ZHBCMC120025ZHBCMC250025ZHBCMC4K25ZHBCMC6K25ZHBCMC12K25ZHBCMC18K25ZHBCMC57550ZHBCMC120050ZHBCMC250050ZHBCMC4K50ZHBCMC6K50ZHBCMC12K50ZHBCMC18K50Desisti575 w1.2 Kw2.5 Kw4 Kw6 Kw12 Kw18 Kw06-24-2-PSCZ-P21P006-24-2-PSCW-P21P006-24-2-PSC0-P29P006-24-2-PSC0-P29P006-32-68-PSC0-P36P006-32-68-PSC0-P36P006-32-68-PSC0-P36P001-24-2-SSCZ-P21P001-24-2-SSCW-P21P001-24-2-SSC0-P29P001-24-11-SSC0-P29P001-32-68-SSC0-P36P001-32-68-SSC0-P36P001-32-68-SSC0-P36P0PC167TPC167TPC147TPC83126TPC44166TPC44166TPC44166TZHBDES57525ZHBDES120025ZHBDES250025ZHBDES4K25ZHBDES6K25ZHBDES12K25ZHBDES18K25ZHBDES57550ZHBDES120050ZHBDES250050ZHBDES4K50ZHBDES6K50ZHBDES12K50ZHBDES18K50Filmgear575 w1.2 Kw2.5 Kw4 Kw6 Kw12 Kw18 Kw06-24-2-PSCW-P21P006-24-2-PSCW-P21P006-24-2-PSC0-P29P006-24-2-PSC0-P29P001-28-22-PSC0-P29P001-28A-9-PSC0-P36P001-28A-9-PSC0-P36P001-24-2-SSCW-P21P001-24-2-SSCW-P21P001-24-2-SSC0-P29P001-24-2-SSC0-P29P006-28-22-SSC0-P29P006-28A-9-SSC0-P36P006-28A-9-SSC0-P36P0PC167TPC167TPC147TPC127TPC4282123TPC44166TPC44166TZHBFIL57525ZHBFIL120025ZHBFIL250025ZHBFIL4K25ZHBFIL6K25ZHBFIL12K25ZHBFIL18K25ZHBFIL57550ZHBFIL120050ZHBFIL250050ZHBFIL4K50ZHBFIL6K50ZHBFIL12K50ZHBFIL18K50Lee1.2 Kw2.5 Kw6 Kw12 Kw06-20-15-PSC0-P21P006-20-15-PSC0-P21P006-24-2-PSC0-P29P006-24-2-PSC0-P29P001-20-15-SSC0-P21P001-20-15-SSC0-P21P001-24-11-SSC0-P29P001-24-11-SSC0-P29P0PC167TPC147TPC83126TPC83126TZHBLEE120025ZHBLEE250025ZHBLEE6K25ZHBLEE12K25ZHBLEE120050ZHBLEE250050ZHBLEE6K50ZHBLEE12K50LTM575 w1.2 Kw2.5 Kw4 Kw6 Kw12 Kw18 Kw06-20-15-PSC0-P21P006-20-15-PSC0-P21P006-24-2-PSC0-P29P006-24-2-PSC0-P29P006-28A-9-PSC0-P36P006-28A-9-PSC0-P36P006-28A-9-PSC0-P36P001-20-15-SSC0-P21P001-20-15-SSC0-P21P001-24-11-SSC0-P29P001-24-11-SSC0-P29P001-28A-9-SSC0-P36P001-28A-9-SSC0-P36P001-28A-9-SSC0-P36P0PC167TPC167TPC147TPC83126TPC44166TPC44166TPC44166TZHBLTM57525ZHBLTM120025ZHBLTM250025ZHBLTM4K25ZHBLTM6K25ZHBLTM12K25ZHBLTM18K25ZHBLTM57550ZHBLTM120050ZHBLTM250050ZHBLTM4K50ZHBLTM6K50ZHBLTM12K50ZHBLTM18K50MoleRichardson575 w1.2 Kw2.5 Kw4 Kw6 Kw12 Kw18 Kw06-24-2 PSCZ-P21P006-24-2-PSCW-P21P006-24-2-PSC0-P29P006-24-2-PSC0-P29P006-32-68-PSC0-P36P006-28-10-PSC0-P36P006-28-10-PSC0-P36P001-24-2-SSCZ-P21P001-24-2-SSCW-P21P001-24-2-SSC0-P29P001-24-11-SSC0-P29P001-32-68-SSC0-P36P001-28-10-SSC0-P36P001-28-10-SSC0-P36P0PC167TPC167TPC127TPC83126TPC44166TPC4282123TPC4282123TZHBMOL57525ZHBMOL120025ZHBMOL250025ZHBMOL4K25ZHBMOL6K25ZHBMOL12K25ZHBMOL18K25ZHBMOL57550ZHBMOL120050ZHBMOL250050ZHBMOL4K50ZHBMOL6K50ZHBMOL12K50ZHBMOL18K50Strand575 w1.2 Kw2.5 Kw4 Kw6 Kw06-24-2-PSCZ-P21P006-24-2-PSCW-P21P006-24-2-PSC0-P29P006-24-2-PSC0-P29P006-32-68-PSC0-P36P001-24-2-SSCZ-P21P001-24-2-SSCW-P21P001-24-2-SSC0-P29P001-24-11-SSC0-P29P001-32-68-SSC0-P36P0PC167TPC167TPC147TPC83126TPC44166TZHBSTR57525ZHBSTR120025ZHBSTR250025ZHBSTR4K25ZHBSTR6K25ZHBSTR57550ZHBSTR120050ZHBSTR250050ZHBSTR4K50ZHBSTR6K50• Cable is RoHS compliant• TMB UK and Canada cableassemblies RoHS compliant• TMB US cable assembliesRoHS compliant by requestSunray575 w1.2 Kw2.5 Kw4 Kw6 Kw12 Kw18 Kw06-24-2-PSCZ-P21P006-24-2-PSCW-P21P006-24-2-PSC0-P29P006-24-2-PSC0-P29P006-28A-9-PSC0-P36P006-28-10-PSC0-P36P006-28-10-PSC0-P36P001-24-2-SSCZ-P21P001-24-2-SSCW-P21P001-24-2-SSC0-P29P001-24-11-SSC0-P29P001-28A-9-SSC0-P36P001-28-10-SSC0-P36P001-28-10-SSC0-P36P0PC167TPC147TPC147TPC83126TPC44166TPC4282123TPC4282123TZHBSUN57525ZHBSUN120025ZHBSUN250025ZHBSUN4K25ZHBSUN6K25ZHBSUN12K25ZHBSUN18K25ZHBSUN57550ZHBSUN120050ZHBSUN250050ZHBSUN4K50ZHBSUN6K50ZHBSUN12K50ZHBSUN18K50Other configurations available for applications not listed.

Head-To-Ballast Cable SpecificationsPC167T PC147T PC127TDescription7x1.5mm 2 Stranded AWM 20904 FlexibleControl Cable7x2.5mm 2 Stranded AWM 20904 FlexibleControl Cable7x4mm 2 Stranded AWM 20904 Flexible ControlCableConstructionSeven bare copper TPE insulated conductors twisted with an overall TPE jacket.ApprovalsUL Style 20328, CSA I/II AConductors 1.5mm 2 (16 AWG) Bare annealed copper 2.5mm 2 (14 AWG) Bare annealed copper 4mm 2 (12 AWG) Bare annealed copperStranding 26/30 41/30 65/30Insulation MaterialPVCInsulation Thickness 0.81mm (0.032”) Nom. 0.81mm (0.032”) Nom. 0.81mm (0.032”) Nom.Insulated Conductor Dia. 3.073mm (0.121”) Nom. 3.68mm (0.145”) Nom. 4.60mm (0.181”) Nom.Color CodeAll conductors gray with numbers printed in black inkLay Length 152mm (6.00”) Nom. 152mm (6.00”) Nom. 203mm (8.00”) Nom.Lay Up7 around central polypropylene fillerSeparator0.025mm (0.001”) paper tapeJacket MaterialTPEJacket Thickness 1.78mm (0.070”) Nom. 1.78mm (0.070”) Nom. 1.78mm (0.070”) Nom.Overall Diameter 14.35mm (0.565”) Nom. 16.38mm (0.645”) Nom. 19.25mm (0.758”) Nom.ColorBlackMarkingIndent print: E177740 16-7 105°C (-40°C)600V RU AWM STYLE 20328 cRU AWM I/II A105°C 600V FT2 CEIndent print: E177740 14-7 105°C (-40°C)600V RU AWM STYLE 20328 cRU AWM I/II A105°C 600V FT2 CEIndent print: E177740 12-7 105°C (-40°C)600V RU AWM STYLE 20328 cRU AWM I/II A105°C 600V FT2 CEWeight 253 Kg / Km (170 lb. / Mft) Nom. 437.4 Kg / Km (294 lb. / Mft) Nom. 571.3 Kg / Km (384 lb. / Mft) Nom.Temperature Rating105° C Max.Operating Voltage600V Max.PC83126T PC44166T PC4282123TDescriptionConstructionApprovalsApplicationConductorsStrandingInsulation MaterialInsulation ThicknessInsulated Conductor Dia.Number of Conductors3x10mm 2 & 6x4mm 2 Stranded AWM 20904Flexible Control CableThree 10mm 2 and six 4mm 2 bare copper TPEinsulated conductors cabled with fillers and anoverall TPE jacket.600V Portable Oil Resistant Flexible ControlCable10mm 2 (8 AWG) and 4mm 2 (12 AWG) BareCopper10mm 2 : 7x19 / 294mm 2 : 65/3010mm 2 : 0.062” Nom.4mm 2 : 0.047” Nom.10mm 2 : 0.289” Nom.4mm 2 : 0.186” Nom.10mm 2 : 34mm 2 : 64x25mm 2 & 6x1.5mm 2 Stranded AWM 20904Flexible Control CableFour 25mm 2 and six 1.5mm 2 bare copper TPEinsulated conductors cabled with fillers and anoverall TPE jacket.UL Subject 758 Style 20904, CSA 22.2 No. 210, CE600V Portable Oil Resistant Flexible Control600V Flexible CableCable25mm 2 (4 AWG) and 1.5mm 2 (16 AWG) BareCopper25mm 2 : 7x19 / 0.0177”1.5mm 2 : 26/3025mm 2 : 0.062” Nom.1.5mm 2 : 0.031” Nom.25mm 2 : 0.383” Nom.1.5mm 2 : 0.120” Nom.25mm 2 : 41.5mm 2 : 6TPE2x25mm 2 & 2x10mm 2 & 3x4mm 2 StrandedAWM 20904 Flexible Control CableTwo 25mm 2 , two 10mm 2 and three 4mm 2 barecopper TPE insulated conductors cabled withfillers and an overall TPE jacket.25mm 2 (4 AWG), 10mm 2 (8 AWG) and 4mm 2(12 AWG) Bare Copper25mm 2 : 7x60 / 3010mm 2 : 7x19 / 294mm 2 : 65/3025mm 2 : 0.062” Nom.10mm 2 : 0.062” Nom.4mm 2 : 0.047” Nom.25mm 2 : 0.378” Nom.10mm 2 : 0.289” Nom.4mm 2 : 0.186” Nom.25mm 2 : 210mm 2 : 24mm 2 : 3Lay Length 254mm (10.00”) Nom. 305mm (12.00”) Nom. 305mm (12.00”) Nom.Filler TypePolypropyleneSeparator / Wrap Paper Tissue Paper Tissue Paper Tissue / Binder ThreadJacket MaterialTPEJacket Thickness 2.92mm (0.115”) Nom. 2.92mm (0.115”) Nom. 2.92mm (0.115”) Nom.Overall Diameter 27.43mm (1.080”) Nom. 29.97mm (1.180”) Nom. 28.34mm (1.116”) Nom.MarkingIndent print: E177740 8-3 & 12-6 105C(-40C)600V RU AWM STYLE 20904 CSA 222479AWM A/B II 105C 600V FT2 CEIndent print: E177740 4-4 & 16-6 105C(-40C)600V RU AWM STYLE 20904 CSA 222479AWM A/B II 105C 600V FT2 CEIndent print: E177740 4-2 & 8-2 & 12-3 105C(-40C) 600V RU AWM STYLE 20904CSA 222479 AWM II A/B 105C 600V FT2 CEWeight 988.2 Kg / Km (664.2 lb. / Mft) Nom. 1584.5 Kg / Km (1065.0 lb. / Mft) Nom. 1284 Kg / Km (863.0 lb. / Mft) Nom.Flame RatingUL/CSA Horizontal Flame TestTemperature Rating-40° C to 105° COperating VoltageDC Resistance per Conductor @ 20° C10mm 2 : 0.61 Ohms / 1M’4mm 2 : 1.59 Ohms / 1M’300V RMS Max.25mm 2 : 0.25 Ohms / 1M’1.5mm 2 : 4.00 Ohms / 1M’25mm 2 : 0.25 Ohms / 1M’10mm 2 : 0.61 Ohms / 1M’4mm 2 : 1.59 Ohms / 1M’LITPCHBASSYA4-052213

Moulded 19-PinAssembliesProSeries 19-pin connectors now available in overmould assemblies!Rugged ProMolded assemblies offer maintenance-freeperformance and long service life.The ProSeries connector insert is solderedby TMB’s technical staff. Heatshrink tubingis applied over all connections. A strainrelief is tightly crimped to the cable jacket.A polypropylene inner mould fullyencapsulates the connections and strainrelief.• Improved strain and flex relief.• Eliminate broken terminations and pushed pins.• No more broken backshells.• Greater pull strength.• Moisture and water resistant.• Easy to handle – quick connect and disconnect.• Interfaces with all conventional 19-pin six-circuitconnectors.• Industrial-strength durability – perfect fortouring, studios, theatres and more.• Long-term reliability – excellent return oninvestment.• Five year warranty.A Santoprene overmould is applied overthe entire assembly including the maleconnector locking ring.Components InsideLITPROMOLDEDA4-052312

CAT5e SNAKE CABLESFlexible, portable CAT5e Snake Cables designedfor the harshest conditions.Individual SF/UTP,ISO/IEC11801 compliant,100 Ohm, 24 AWG, CAT5ecables with PU jackets.PCCAT5ET4X 4-channel• Manufactured with TMB’s ‘ruggedized’ technology, evolving from therigors of Rock & Roll concert touring since 1983.• Endures constant hand-coiling and twisting, all weather conditionsindoors and outdoors, and mechanical abuse of all kinds.• 4-channel version available.• Each channel (or “universe”) can also be wired for DMX or CommLink.• Custom snakes with a variety of connectors in any configuration.Made to order - Rush Service Normal.X-Series XLRDurable RJ-45Backshell

CAT5e SNAKE SPECIFICATIONSOverall Assembly SpecificationsPart NumberPCCAT5ET4XOverall JacketMaterialColourMarkingOverall DiameterUV and Oil resistant FR-PVC flexible compoundBlackTMB PROPLEX PCCAT5ET4X 24 AWG 4 - CHANNEL SF/UTP CAT5E SNAKE CABLE18.7 mm nom.Temperature RangeWeightDuring installation: -5 to +60 Deg.COperational: -25 to +70 Deg.C320 kg/km, nom.Flame Test UL 1581 VW-1, IEC 60332.1Min. Bend Radius120 mmIndividual Cable Physical SpecificationsIndividual Cable Electrical SpecificationsConductorsInsulationNumber of Pairs 4Colour CodeAssemblyShieldsMaterialColourMarkingOuter DiameterComplianceJacketStranded TC, 7x0.2 mm (24 AWG)PE, 1 mm nom. O.D.Blue x White, Orange x White, Green x White,Brown x WhiteThe four pairs are cabled together withAramid and glass fiber strength members andtape wrapped.Polyester-aluminum foil, providing 100%coverage.Tinned copper braid, providing 80% coverage.FR-PU compound.BlackPer request.7.1 mm nom.RoHSDC ResistanceImpedanceAttenuation(Maximum values)NEXT : Near-EndCrosstalk LossCapacitanceVoltage ratingDielectric strengthInsulation ResistanceVelocity of PropagationPropagation DelayDifferential Delay SkewCapacitance UnbalanceResistance UnbalanceReturn Loss96 Ohm/km, max. @ 20C100 ± 15 Ohm @ 1-100 MHz2.5 dB/100m max. @ 1 MHz4.9 dB/100m max. @ 4 MHz7.8 dB/100m max. @ 10 MHz9.9 dB/100m max. @ 16 MHz11.1 dB/100m max. @ 20 MHz14.1 dB/100m max. @ 31.25 MHz20.4 dB/100m max. @ 62.5 MHz26.4 dB/100m max. @ 100 MHz65 dB min. @ 1 MHz56 dB min. @ 4 MHz50 dB min. @ 10 MHz47 dB min. @ 16 MHz46 dB min. @ 20 MHz43 dB min. @ 31.25 MHz38 dB min. @ 62.5 MHz35 dB min. @ 100 MHz46 pF/m230 V rms700 Volts AC / 1 minute5000 MOhm•km min.Solid insulation: 68% nom.Cellular Insulation: 75% nom.570 nS/100m max @ 1 MHz545 nS/100m max @ 10 MHz537 nS/100m max @ 100 MHz35 nS/100 m max @ 1-100 MHz3.2 pF/m max. @ 1 kHz (wire to ground)2% max. @ 20C20 dB/100 m min. @ 1 MHz25 dB/100 m min. @ 16 MHz20.7 dB/100 m min. @ 62.5 MHz19 dB/100 m min. @ 100.0 MHzLITPXCAT5ESNKA4-052213

DATA CABLE CROSS-REFERENCECable Description Cross-referencePC244TInstallation DMX Cable - 2 pair, 0.25mm 2 (24 AWG) data cable withindividually shielded pairs, CM CMH.Belden 9729DMXPC244TPPC224TPlenum installation DMX cable - 2 pair, 0.25mm 2 (24 AWG) data cablewith individually shielded pairs, CMP.Installation (indoor/outdoor) / medium duty portable DMX cable - 2pair, 0.34mm 2 (22 AWG) data cable with overall shielded pairs, CL2 FT1,UV and fungus resistant.Extra heavy-duty portable (indoor/outdoor) DMX cable - 2 pair,0.34mm 2 (22 AWG) data cable with overall shielded pairs.Installation RFU cable - 4 pair, 0.25mm 2 (24 AWG) data cable withindividually shielded pairs, CM CMH.Plenum installation RFU cable - 4 pair, 0.25mm 2 (24 AWG) data cablewith individually shielded pairs, CMP.Installation / portable (indoor/outdoor) medium duty RFU cable - 3pair, 0.34mm 2 (22AWG) data cable with overall shielded pairs, CL2 FT1,UV and fungus resistant.CAT5 SFTP requirements. Extra heavy-duty portable patch cable - 4pair, 0.14mm 2 (26 AWG), 100 Ohm SFTP round cable, overall doubleshield, jacketed in black UV resistant Polyurethane. Designed to the IEC61156 and TIA/EIA 568-B CAT5 requirements. Meets all CAT5 horizontalspecs up to 85 meters; all CAT5 horizontal specs except attenuation up to100 meters.CAT5E SFTP requirements. Extra heavy-duty portable patch cable- 4 pair, 0.25mm 2 (24 AWG), 100 Ohm SFTP round patch cable, doubleshielded with kevlar reinforcement strands, jacketed in black UV resistantPolyurethane. Designed to the ISO / IEC 11801 CAT5E requirements.Meets all CAT5 horizontal specs up to 75 meters; all CAT5 horizontalspecs except attenuation up to 100 meters.CAT5E UTP requirements. Extra heavy-duty portable patch cable- 4 pair, 0.25mm 2 (24 AWG), 100 Ohm UTP round cable, assembledwith kevlar reinforcement strands, jacketed in Black UV resistantPolyurethane. Designed to the IEC 61156-6 and TIA/EIA 568-B.2 CAT5Erequirements. Meets all CAT5 horizontal specs up to 85 meters; all CAT5horizontal specs except attenuation up to 100 meters.Belden 89729Belden 9829 is similar but only 24AWG and with no UV/fungus resistance(Belden is not for outdoor installation).PC224PNo ComparisonPC248TBelden 9728RFUPC248TPPC226TBelden 89728Belden 9830 is similar but only 24AWG and with no UV/fungus resistance(Belden is not for outdoor installation).CAT5PCCAT5PNo ComparisonCAT5EPCCAT5EPPCCAT5EUTPPNo ComparisonNo ComparisonETC UnisonLink PowerPCLP1PTPCLP1PTPInstallation with non-metallic conduit - 1 pair, 1.5 mm 2 (16 AWG)twisted with 0.34mm 2 (22 AWG) ground, CL3 FT1.Plenum installation - 1 pair, 1.5 mm 2 (16 AWG) twisted with 0.34mm 2(22 AWG) ground, CL3P FT1.Belden 8471 + 22AWG THHNPlenum rated equivalent to Belden8471 + 22AWG plenum conductor.ETC UnisonLink +DisplayPCLP2PTPCLP2PTPInstallation plus LCD display panel - 2 pair, 1.5 mm 2 (16 AWG) twistedwith 2.5mm 2 (14 AWG) ground, CL3 FT1.Plenum installation plus LCD display panel - 2 pair, 1.5 mm 2 (16 AWG)twisted with 2.5mm 2 (14 AWG) ground, CL3P FT1.2X Belden 8471 + 14 AWG THHNPlenum rated equivalent to 2X Belden8471 + 14AWG plenum conductor.LITPPXXREFA4-052312

CABLES FORSYSTEMSPC244TCableApplicationInstallation DMX Cable - 2 pair, 0.25mm 2 (24 AWG) data cable with individually shielded pairs, CM CMH.DMXPC244TPPC224TPC224PPlenum installation DMX cable - 2 pair, 0.25mm 2 (24 AWG) data cable with individually shielded pairs, CMP.Installation (indoor/outdoor) / medium duty portable DMX cable - 2 pair, 0.34mm 2 (22 AWG) data cablewith overall shielded pairs, CL2 FT1, UV and fungus resistant.Extra heavy-duty portable (indoor/outdoor) DMX cable - 2 pair, 0.34mm 2 (22 AWG) data cable with overallshielded pairs.PC248TInstallation RFU cable - 4 pair, 0.25mm 2 (24 AWG) data cable with individually shielded pairs, CM CMH.RFUETC LinkCAT5CAT5EETC UnisonLink PowerPC248TPPC226TPC248TPC248TPPC226TPCCAT5PPCCAT5EPPCCAT5EUTPPPCLP1PTPCLP1PTPPlenum installation RFU cable - 4 pair, 0.25mm 2 (24 AWG) data cable with individually shielded pairs, CMP.Installation / portable (indoor/outdoor) medium duty RFU cable - 3 pair, 0.34mm 2 (22AWG) data cable withoverall shielded pairs, CL2 FT1, UV and fungus resistant.Installation RFU cable - 4 pair, 0.25mm 2 (24 AWG) data cable with individually shielded pairs, CM CMH.Plenum installation RFU cable - 4 pair, 0.25mm 2 (24 AWG) data cable with individually shielded pairs, CMP.Installation / portable (indoor/outdoor) medium duty RFU cable - 3 pair, 0.34mm 2 (22AWG) data cable withoverall shielded pairs, CL2 FT1, UV and fungus resistant.CAT5 SFTP requirements. Extra heavy-duty portable patch cable - 4 pair, 0.14mm 2 (26 AWG), 100 OhmSFTP round cable, overall double shield, jacketed in black UV resistant Polyurethane. Designed to the IEC61156 and TIA/EIA 568-B CAT5 requirements. Meets all CAT5 horizontal specs up to 85 meters; all CAT5horizontal specs except attenuation up to 100 meters.CAT5E SFTP requirements. Extra heavy-duty portable patch cable - 4 pair, 0.25mm 2 (24 AWG), 100 OhmSFTP round patch cable, double shielded with kevlar reinforcement strands, jacketed in black UV resistantPolyurethane. Designed to the ISO / IEC 11801 CAT5E requirements. Meets all CAT5 horizontal specs up to75 meters; all CAT5 horizontal specs except attenuation up to 100 meters.CAT5E UTP requirements. Extra heavy-duty portable patch cable - 4 pair, 0.25mm 2 (24 AWG), 100 OhmUTP round cable, assembled with kevlar reinforcement strands, jacketed in Black UV resistant Polyurethane.Designed to the IEC 61156-6 and TIA/EIA 568-B.2 CAT5E requirements. Meets all CAT5 horizontal specs up to85 meters; all CAT5 horizontal specs except attenuation up to 100 meters.Installation with non-metallic conduit - 1 pair, 1.5 mm 2 (16 AWG) twisted with 0.34mm 2 (22 AWG) ground,CL3 FT1.Plenum installation - 1 pair, 1.5 mm 2 (16 AWG) twisted with 0.34mm 2 (22 AWG) ground, CL3P FT1.ETC UnisonLink +DisplayPCLP2PTPCLP2PTPInstallation plus LCD display panel - 2 pair, 1.5 mm 2 (16 AWG) twisted with 2.5mm 2 (14 AWG) ground, CL3FT1.Plenum installation plus LCD display panel - 2 pair, 1.5 mm 2 (16 AWG) twisted with 2.5mm 2 (14 AWG)ground, CL3P FT1.LITPPXXETC-052312

CABLES FORGENERAL:PCLP2PT- PROPLEX UNISON MULTIPURPOSE CABLE: 2-pair - for the distribution of Echelon link power and auxiliary power for remotedevices such as interfaces and LCD panels. The integral drain wire is especially useful in installations with non-metallic conduit.2-16 AWG (1.5mm2) pairs and 1-14 AWG (2.5mm2) ground conductor in a durable PVC jacket.PCLP2PTP - As above but meets UL Standard 13, NEC Article 725 for Plenum Applications.PCLP1PT- PROPLEX UNISON LINK POWER CABLE: 1-pair - for the distribution of Echelon link power. The integral drain wire isespecially useful in installations with non-metallic conduit.1-16 AWG (1.5mm2) pair and 1-22 AWG (0.34mm2) ground conductor in a durable PVC jacket.PCLP1PTP - As above but meets UL Standard 13, NEC Article 725 for Plenum Applications.TESTING:• UL Type CL3 in accordance with NEC article 725 for class 3 power limited circuits.• Plenum Cables - NFPA 262 Smoke and Flame Test.ConductorsInsulationAssemblyJacketPhysicalMarkings16 AWG (1.5mm 2 ) Conductors:Tinned, annealedcopper, stranded[26/30]16 AWGConductors:300 volt PVCBlack/White, Red/BlueNom. Wall: 0.023”(0.58 mm)Nom. Dia.: 0.105”(2.7 mm)Standard CablesPlenum CablesPCLP2PT PCLP1PT PCLP2PTP PCLP1PTP14 AWG (2.5 mm 2 )Conductor: Tinned,annealed copper,stranded [41/30]14 AWG Conductor:300 volt PVCGreenNom. Wall: 0.023”(0.58 mm)Nom. Dia.: 0.120”(3.05 mm)2 pairs - 16 AWG conductors and 1 - 14AWG conductor cabled with fillersBlack PVCUV and fungus resistantNom. wall: 0.040” (1.02 mm)Outside Diameter: 0.490” (12.5 mm) Nom.Weight: 130 lbs. per 1,000 ft.(194Kg per 1,000 m)Indent Print: *PROPLEX PCLP2PT*UNISON MULTIPURPOSE CABLE CL3(UL) E177741 FT116 AWG (1.5mm 2 ) Conductors:Tinned, annealedcopper, stranded[26/30]16 AWGConductors:300 volt PVCBlack/WhiteNom. Wall: 0.023”(0.58 mm)Nom. Dia.: 0.105”(2.7 mm)22 AWG (0.34mm 2 ) Conductor:Tinned, annealedcopper stranded[7/30]22 AWG Conductor:300 volt PVCGreenNom. Wall: 0.010”(0.25 mm)Nom. Dia.: 0.050”(1.27 mm)1 pair - 16 AWG conductors and 1 - 22AWG conductor cabled with fillersBlack PVCUV and fungus resistantNom. wall: 0.032” (0.81 mm)Outside Diameter: 0.275” (7 mm) Nom.Weight: 55 lbs. per 1,000 ft.(82Kg per 1,000 m)Indent Print: *PROPLEX PCLP1PT*UNISON LINK POWER CABLE CL3 (UL)E177741 FT116 AWG (1.5mm 2 ) Conductors:Tinned, annealedcopper, stranded[26/30]16 AWGConductors:300 volt LS PlenumPVCBlack/White, Red/BlueNom. Wall: 0.010”(0.25 mm)Nom. Dia.: 0.079”(2 mm)14 AWG (2.5mm 2 ) Conductor:Tinned, annealedcopper, stranded[19/0.0147]14 AWG Conductor:300 volt LS PlenumPVCGreenNom. Wall: 0.012”(0.30 mm)Nom. Dia.: 0.095”(2.41 mm)2 pairs - 16 AWG conductors and 1 - 14AWG conductor cabled with no fillers.6 twists per foot (min.) 2” lay (max.)White LS Plenum PVCNom. wall: 0.021” (0.53 mm)Outside Diameter: 0.315” (8 mm) Nom.Weight: 66 lbs. per 1,000 ft.(98Kg per 1,000 m) approx.Surface Print: PROPLEX PCLP2PTPUNISON MULTIPURPOSE CABLE16/2PR + 14/1 E57497 CL3P 14 AWG(UL) MADE IN USA RoHS COMPLIANT16 AWG (1.5mm 2 ) Conductors:Tinned, annealedcopper, stranded[26/30]16 AWGConductors: 300volt LS PlenumPVCBlack/WhiteNom. Wall: 0.010”(0.25 mm)Nom. Dia.: 0.079”(2 mm)22 AWG (0.34mm 2 ) Conductor:Tinned, annealedcopper stranded[7/30]22 AWG Conductor:300 volt LS PlenumPVCGreenNom. Wall: 0.008”(0.20 mm)Nom. Dia.: 0.046”(1.17 mm)1 pair - 16 AWG conductors and 1 - 22AWG conductor cabled with no fillers.6 twists per foot (min.) 2” lay (max.)White LS Plenum PVCNom. wall: 0.021” (0.53 mm)Outside Diameter: 0.198” (5 mm) Nom.Weight: 30 lbs. per 1,000 ft.(45Kg per 1,000 m) approx.Surface Print: PROPLEX PCLP1PTPUNISON LINK POWER CABLE 16/2 +22/1 E118871 CMP/CL3P 16 AWG (UL)c(UL) MADE IN USA RoHS COMPLIANTTemperature 60° C (-20° C) 60° C (-20° C) 60° C (-20° C) 60° C (-20° C)OperatingVoltage300 V RMS Max. per NEC Article 725 300 V RMS Max. per NEC Article 725 300 V RMS Max. per NEC Article 725 300 V RMS Max. per NEC Article 725Capacitance32 pF/ft. Nom. Between Conductors @1 KHz32 pF/ft. Nom. Between Conductors @1 KHz28.1 pF/ft Nom. Between Conductors @1 KHzImpedance 80 Ohms 100 Ohms 66 Ohms 57 OhmsInductance 0.144 uH/ft. Nom. 0.216 uH/ft. Nom. 0.19 uH/ft. Nom. 0.19 uH/ft. Nom.DC Resistance4.15 Ohms/1Mft Max. per 16ga Conductor@ 20° C4.15 Ohms/1Mft Max. per 16ga Conductor@ 20° C4.35 Ohms/1Mft Max. per 16ga Conductor@ 20° C32.4 pF/ft Nom. Between Conductors @1 KHz4.35 Ohms/1Mft Max. per 16ga Conductor@ 20° CVelocity ofPropagation53% 53% 55% 55%Bend Radius 2.5” (65 mm) Minimum 1.5” (38 mm) Minimum 3.25” (83 mm) Minimum 2.0” (50.8 mm) MinimumPull Tension 115 lbs. (52 Kg) Maximum 45 lbs. (20 Kg) Maximum 123 lbs. (55.8 Kg) Maximum 66 lbs. (29.9 Kg) MaximumLITPPXUNISONA4-112712

PCCAT5EPCAT5e SFTP EthernetPatch CablePCCAT5EP2XDual CAT5e SFTPFigure Eight CablePCCAT5EUTPPCAT5e Ultra-Patch UTPEthernet CableFinally! Ethernet patch cables designed to withstand the extreme conditionsof the real world. Available as fully assembled patch cables, in standardand custom lengths, with your choice of four heavy-duty RJ-45 connectors.Panel-mount connectors also available for a complete OEM Ethernet wiringsolution.Durable RJ-45Backshell

General InformationPCCAT5EPCAT5E SFTP ETHERNETPATCH CABLEPCCAT5EP2XCAT5E SFTPFIGURE EIGHT CABLEA 4 pair, 24 AWG, 100 Ohm SFTP round patch cable, designed to the ISO/ IEC 11801 Category 5e requirements. The cable contains 4 twisted pairs,cabled, double shielded with kevlar reinforcement strands, jacketed in blackUV resistant Polyurethane. Designed for fixed or portable applications in harshenvironments.Two PCCAT5EP cables extruded together like a zip cord. Eliminates the needfor banding two ethernet cables together.PCCAT5EUTPP A 4 pair, 24 AWG, 100 Ohm UTP round cable, designed to the IEC 61156-6and TIA/EIA 568-B.2 CAT5 requirements. The cable contains 4 twisted pairs,CAT5E ULTRA-PATCH cabled, assembled with kevlar reinforcement strands, jacketed in Black UVUTP ETHERNET CABLE resistant Polyurethane.Attenuation db/100m nom.772 KHz 1 MHz 4 MHz 10 MHz 16 MHz 20 MHz 31.25 MHz 62.5 MHz 100 MHzPCCAT5EP 2.7 3.15 6.45 9.9 12.3 13.8 17.7 25.6 33PCCAT5EP2X 2.7 3.15 6.45 9.9 12.3 13.8 17.7 25.6 33PCCAT5EUTPP 2.5 4.9 7.8 9.9 11.1 14.1 20.4 26.4N.E.X.T (Near-End Crosstalk Loss) db min.772 KHz 1 MHz 4 MHz 10 MHz 16 MHz 20 MHz 31.25 MHz 62.5 MHz 100 MHzPCCAT5EP 64 62 53 47 44 42 40 35 32PCCAT5EP2X 64 62 53 47 44 42 40 35 32PCCAT5EUTPP 65 56 50 47 46 43 38 35Reeling CapabilityIn the core level, under the shields, are 4 pairs and 6 strength members, 3 white and 3 yellow.Two central strength members perform “tension relief” function. The other four are twistedaround the pairs, each pair is wrapped in a strength member to perform “pair structureholding” function. The reason for two types of strength members; each one has a differentprolongation constant, one positive, the other negative, so on average the length of thestrength members is constant and equal to the wire length.To install this cable for reeling purposes the following guidelines arestated.• Minimum reel core diameter is 10 cm.• Minimum tension used during reeling and un-reeling process.• Terminate the cable with plugs before reeling initiated.• Cable length per reel is less than 90 meter.

ConductorsInsulationGeneral SpecificationsPCCAT5EP PCCAT5EP2X PCCAT5EUTPP24 AWG (0.25 mm 2 ) tinned copper, 7x0.20 mmColor coded 568-B, Linear Low Density Polyethylene,Nom. Dia. 0.039” (1 mm)24 AWG (0.25 mm 2 ) tinned copper,7x0.20 mmColor coded 568-B, solid PO, Nom.Dia. 0.038” (0.97 mm)AssemblyPairs cabled with Kevlar strength members and separation tape wrapped.ShieldsInner: Aluminum mylar 100% coverage.Outer: tinned copper braid, 80%NoneJacket Black, special PUR compound. Black, special PUR compound.Weight 40 lbs. / mft (59 KG/Km) 73.9 lbs. / mft (110 KG/Km) 30 Lbs. / mft (44 KG/Km)Outside Diameter0.28” (7.1 mm) nom.0.53” x 0.26” (13.5 x 6.5 mm)± 0.15” (0.4 mm)0.244” (6.2 mm) nom.Minimum Bend RadiusDuring Installation67.5 mm (9 x O.D.) 45 mmMinimum Bend RadiusDuring Operation37.5 mm (5 x O.D.) 45 mmMinimum Flexes toFailurePasses IEC 61156-6 requirements.Temperature RatingComplianceInstallation: -5 to +60 Deg. COperational: -25 to +70 Deg. CRoHSInstallation: -5 to +60 Deg. COperational: -25 to +70 Deg. CElectrical SpecificationsPCCAT5EP PCCAT5EP2X PCCAT5EUTPPVoltage Rating 230 VMS 230 VMSSpark Test (testedduring production)3 KVVelocity of Propagation 67% nom. 68% nom.Impedance 100 +/-15 Ohms 1-100 MHz 100 +/-15 Ohms 1-100 MHzPropogation Delay(100MHz)5.2 ns/m max. @ 100 MHz570ns/100m max @ 1 MHz545ns/100m max @ 10 MHz537ns/100m max @ 100 MHzDelay Skew 20 ns/100 m max. @ 1-100 MHz 35ns/100m max @ 1-100 MHzDielectric Strength VAC/1min - 700V/min VAC/1min - 700V/minCapacitance 46 pF/m nom. @1 KHz pair 46 pF/mLCL43 dB min. @ 64 KHzResistance Unbalance 3% max @ 20 deg. C 2% max @ 20 degree CCapacitanceUnbalance3.4 pF/m max. @1KHz (wire to ground)3.2 pF/m max. @1KHz (wire toground)Insulation Resistance 150 M Ohm Min. 5000 M Ohm / Km Min.Return Loss(100 MHz)23 db/100m min @ 1-20 MHz20 db/100 m min. @ 1 MHz25 db/100 m min. @ 16 MHz20.7 db/100 m min. @ 62.5 MHz19 db/100 m min. @ 100 MHzDC Resistance 96 Ohms/Km @ 20 deg. C 96 Ohms/Km @ 20 deg. C

Jacket Compound SpecificationHalogen Free Flame Retardant PolyetherbasedPolyurethane, Glossy finish.Excellent Hydrolysis resistance.High microbial resistance.UV resistant. High flexibility.Jacket Testing ResultsTest Test Method ResultDensity DIN 53479 1.15g/cubic cmTensile strength DIN 53504 40 nom. N/sqmmTensile strength after 42 days, H2O 80°C DIN 53504 30 N/sqmmUltimate elongation DIN 53504 550 nom. % min.20% modulus DIN 53504 3.2 N/sqmm100% modulus DIN 53504 5.5 N/sqmm300% modulus DIN 53504 12 N/sqmmTear strength DIN 53515 60 N/mmHardness shore A DIN 53505 87Hardness shore D DIN 53505 36Melt index- MVR ISO 1133 30-60 cubic cm/10 minBrittle point DIN 53513 minus 45°CAbrasion Loss DIN 53516 40 cubic mmCompresion set (23°C) 70h DIN 53517 30%Compresion set (70°C) 24h DIN 53517 50%PUR Jacket Chemical Resistance Chart - Organic SubstancesMedium Temperature Concentration ReactionAcetic AcidAcetoneAstm Fuel AAstm Fuel BAstm Fuel CAstm Oil 1Astm Oil 2Astm Oil 3BenzeneButanolButyle AcetateCitric AcidCutting OilCyclohexanolDibutylphthalateDiesel OilDiesel OilDiethyletherDiethylprestoneDimethylformamideEthyl AlcoholEthylacetateEthyletherGlycerinGlycolGlysantin / Water 1:1Glysantin / Water 1:1Hydraulic OilIsopropanolIsopropyl AlcoholKerosineMachine OilMethanolMethyl AlcoholMethylen ChlorideMethylethylketoneMineral OilOlive OilParaffin OilSiccinic Acid, Aqu.Vegetable Oil And FatsRoom TempRoom TempRoom TempRoom TempRoom Temp80°C80°C80°CRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom Temp80°CRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom Temp80°CRoom TempRoom TempRoom TempRoom Temp20%40%4%10%18%3%6%40%5%40%5%100%40%2%12%100%3%10%100%45%cold saturatedslightpoornilnilnil to slightnilnilnilpoorpoorpoorslightnil to slightslightslightnil to slightnilnil to slightnil to slightsoluableslightpoorslightnilnilslightslightslightslightslightnilnil to slightslightslightno resistancepoornilnilnil to slightnil to slightnilPUR Jacket Chemical Resistance Chart - Inorganic SubstancesMedium Temperature Concentration ReactionAcetic AcidAcetic Acid 3NAluminium Chloride, Aqu.Ammonia, Aqu.AnilineBarium SaltsBoric AcidCalcium ChlorideCalcium NitrateChromium Salts, Aqu.Copper Salts, Aqu.Fe Chloride, Aqu. 5%Hydrochloric Acid 20%Hydrogen PeroxideHydrogen SulphideMagnesium Salts, Aqu.MercuryMercury Salts, Aqu.Nickel Salts, Aqu.Nitric AcidPhosphoric AcidPotassium Carbonate, Aqu. (Potash)Potassium ChloridePotassium Dichromate, Aqu.Potassium IodiePotassium Nitrate,Aqu.Potassium PermanganatePotassium Sulphate, Aqu.Sea WaterSilver Salts, Aqu.Sodium Bicarbonate, Aqu. (Soda)Sodium Chloride, Aqu.Sodium Chloride Solution, Conc.Sodium Hydroxide Solution 1NSodium Thiosulphate, Aqu.SulphurSulphur DioxideSulphuric Acid 20%TolueneWaterWaterWaterRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom Temp40°CRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom TempRoom Temp100°CRoom Temp80°C20%5%10%cold saturated100%cold saturatedcold saturatedcold saturatedcold saturated20%3%cold saturated100%cold saturatedcold saturated20%50%cold saturated100%100%35%nil to slightpoornilnilno resistancenil to slightnil to slightnil to slightnil to slightnil to slightnil to slightslightnil to slightnil to slightnil to slightnil to slightnil to slightnil to slightnil to slightno resistancenil to slightnil to slightnil to slightslightnil to slightnil to slightnil to slightnil to slightnilnil to slightslightnil to slightnilslightnil to slightnil to slightslightslightpoorpoornilnil to slightKey:Nil: Resistance over a prolonged period.Nil to slight: After a certain time appreciable differences are noticible.Slight: Conditionally resistant.Poor: Short term contact possible under certain conditions.No resistance: Pronounced attackLITPPXCAT5EA3-052312

Rock & Roll TacticalFibre Optic CableThe World’s Most Durable Fibre Optic Cable – More thanMilitary Tactical, this Is “Rock & Roll Tactical”!Protect your critical show data with rugged ProPlex Fibre. Designed byTMB, the world leader in entertainment and staging cabling, ProPlex Fibre isbuilt to be the world’s most durable fibre cable. This “Rock & Roll Tactical”cable features double cut-proof military-grade jackets, reinforced with 100%coverage, galvanized steel armouring. Additionally, the internal fibres areprotected with a heavy coating of Kevlar Aramid Fibres. For the ultimate inreliability and protection of critical show data in the entertainment and staging markets, the cablesprovide maximum impact, crush and cut resistance in a flexible easy-to-coil, kink-free design.The standard ProPlex Fibre cable, in stock, available for immediate shipment, features OM3 multi-mode,TAC4, four fibre, quad configuration. Single-mode and other configurations are available by specialorder.ProPlex Fibre Cable AssembliesAlso in stock at TMB are ready-made ProPlex Fibre assemblies, available for immediate shipment. Stockassemblies feature Neutrik OpticalCON Quad connectors, complete with protective caps.Standard stock assembly lengths are: 1.5, 5, 30 and 150 metres. The 150 metre assemblies are suppliedon a professional-grade cable reel, in a durable travel case. All other stock lengths are supplied in aprotective Cordura carrying bag.Other assembly lengths, cables and connector types are available by special order.Neutrik OpticalCON(standard on TMB FibreOptic cable assemblies)• 4 PC optical channels for optimized point-to-point LCinter-connectivity.• Ruggedized, durable all-metal housing.• Spring-loaded push-pull locking mechanism forexcellent cable retention.• OpticalCON protection covers standard on TMB FibreOptic cable assemblies and ProPlex Devices.Reel and rugged travel case standard with assembliesover 30 metres.Length Case Size Reel Size Reel Weight5-100M20x16x12 in. 19.1x15x11.2 in. 10.3 lb508x406x305 mm 485x380x285 mm 4.7 kg101-150M23x19x13 in. 21.8x17.6x12.2 in. 11.9 lb584x483x330 mm 554x445x310 mm 5.4 kg151-300M29x24x11 in. 28x22.8x9.9 in. 30.6 lb737x610x280 mm 710x580x250 mm 13.9 kg

Design and MaterialsBuffer Material Polyester ElastomerBuffer Diameter 900 µmColor code Per TIA/EIA 598-CStrength Elements Aramid YarnsInner Jacket Material PUArmoringServed Galvanized Steel WireOuter Jacket Material PUOuter Diameter 8.5 mm nom.Weight94 kg/kmOuter Jacket Color BlackMarkingTBAStandardsApplicable Standards IEC 60794InstallationGuidelines as per IEC60794-1-1 Annex APerformanceMax. Tensile Strength -Short TermMax. Tensile Strength -Long TermImpact ResistanceImpact ResistanceMax. Crush Resistance2500 N1500 N2.2 N•m100 cycles1100 N/cmMin. Bend Radius for Installation 85 mmMin. Bend Radius for Operation 65 mmRepeated Bending2000 cyclesMax. Operating Temperature +85 °CMin. Operating Temperature -55 °CMax. Storage Temperature +85 °CMin. Storage Temperature -55 °CUV resistanceYesWaterblockingYesFiber SpecificationsISO/IEC 11801 Performance Category OM3 (1)Attenuation (2) , Loose Tube CablesAttenuation (2) , Tight Buffer and Semi-Tight Cables@ 850 nm@ 1300 nm@ 850 nm@ 1300 nm≤ 2.8 dB/km≤ 0.9 dB/km≤ 3.2 dB/km≤ 1.0 dB/kmOFL Bandwidth (3) @ 850 nm ≥ 200 MHz●km@ 1300 nm ≥ 600 MHz●kmEfffective Modal Bandwidth @ 850nm≥ 2000 MHz●kmSupported Ethernet Link Lengths (max.)@ 850 nm (1000BASE-SX)1GbE (4) 970 m (7)@ 1300 nm (1000BASE-LX) 550 m (7)(5)@ 850 nm (10GBASE-SR) 300 m10GbE@ 1300 nm (10GBASE-LX4)300 m40/100 GbE (6) @ 850 nm (40/100 GBASE-SR4/10) 100 mNumerical Aperture 0.20 ± 0.015Core Diameter50 ± 2.5 μmCladding Diameter125 ± 1 μmCore Non Circularity ≤ 4 %Cladding Non-Circularity ≤ 0.7 %Core/Cladding Offset≤ 1.5 μmCoating Diameter (Un-dyed)245 ± 10 μmProof-Test Level0.7 GN/m21. As per IEC 60793-2-10 type A1a.2 and TIA 492AAAC2. For attenuation values of fibers in tactical cables (Product Description TAC-...),3. As per IEC 60794-1-41 and TIA/EIA 455-2044. Per IEEE 802.3z, assuming the requirements of the Standard and associateddocuments are met5. Per IEEE 802.3ae, assuming the requirements of the Standard andassociated documents are met6. Per IEEE 802.3ba, assuming the requirements of the Standard andassociated documents are met7. Calculated per the IEEE 1GbE link modelNeutrik OpticalCON Protective Covers• OpticalCon covers standard on fibre optic assemblies and applicable ProPlex “Blue Boxes”.• Rugged sealing covers fully protect fibre contacts from dust and dirt.• When Line and Chassis connectors are mated, covers also mate to prevent any contamination.© TMB 2012 All Rights Reserved - LITPPXFIBREA4-112712

ProPlex PC224TProPlex PC244TDesigned for maximum ease of installation.Specifications Guaranteed.When data transmission is critical, there is only one option.• Cable is RoHS compliant• TMB UK and Canada cable assemblies RoHS compliant• TMB US cable assemblies RoHS compliant by request

PC224T, PC224TW, PC226T: CL2 UL-Listed low capacitance data cable, overall foil and braid shielding with drain wire. UV andfungus resistant. Fully rated for installations, yet easy handling for light-duty portable applications.PC244T: CM CMH C(UL) 1581-Listed low capacitance data cable, individually shielded pairs and drain wires. UV resistant. Designedfor super easy pulling and stripping in permanent installations. Color coded foil shielding for easy reference.PC244TP: CMP C(UL) 444-Listed low capacitance data cable, individually shielded pairs and drain wires. Plenum-rated.TESTING: All ProPlex data cables are tested to specification as follows: Hi Pot, Continuity, Impedance and Capacitance.PC224T PC224TW PC226T PC244T PC244TPConductors 22 AWG [0.34 mm 2 ] Tinned, annealed copper stranded 19 x 3424 AWG [0.25 mm 2 ] Tinned, annealed copper stranded7 x 32Insulation60° C, 300 Volt, foam HDPE.Nom. wall: 0.016” [0.41 mm]Nom. Diameter: 0.064” [1.63 mm]60° C, 300 Volt, foamHDPE.Nom. wall: 0.019” [0.48mm]Nom. Diameter: 0.062”[1.57 mm]300 Volt, FEP.Nom. wall: 0.010” [0.25mm]Nom. Diameter: 0.044”[1.18 mm]Colour CodeBlack/White,Red/GreenBlack/White,Red/Green,Blue/OrangeBlack/White paired withsilver shield.Black/Red paired with redshield.Black/White pairedRed/Green pairedAssemblyShieldPairs cabled with Kevlar strength member and fillers.Inner: Aluminium / mylar, 100% coverage with drain wire.Outer: Tinned copper braid, 75% coverage.Pairs cabled with individual shields, drain wires, fillersand clear polyester binder.Aluminium / mylar, 100% coverage with drain wire.Drain 22 AWG [0.34 mm 2 ] Tinned, annealed copper stranded 19 x 34.24 AWG [0.25 mm 2 ] Tinned, annealed copper stranded7 x 32JacketPVCNom. wall: 0.040” [1 mm]Tensile strength: 1,500 psiConstruction for easy strippingPVCNom. wall: 0.035” [0.89mm]Construction for easystrippingPlenum PVCNom. wall: 0.018” [0.46mm]Construction for easystrippingJacket Colour Black White Black Grey WhitePhysicalOutside diameter: 0.32” [8.13 mm] nom.Weight: 58 lbs. per 1,000 ft. [82.6 Kg/Km]Outside diameter: 0.33”[8.38 mm] nom.Weight: 63 lbs. per1,000 ft. [89.8 Kg/Km]Outside diameter: 0.315”[8 mm] nom.Weight: 28 lbs. per 1,000ft. [39.9 Kg/Km]Outside diameter: 0.191”[4.85 mm] nom.Weight: 21 lbs. per 1,000ft. [29.2 Kg/Km]Temperature Plus 60° C, minus 20° C Plus 60° C, minus 20° CConductivity15.5 Ohms (max.) @ 20° C24.0 Ohms (max.) @20° C27.2 Ohms (max.) @20° CCharacteristicImpedance110 Ohms @ 1 MHz 100 Ohms @ 1 MHz 71 Ohms @ 1 MHzCapacitance13 pf/ft. nom. conductor-to-conductor27 pf/ft. nom. conductor-to-shield12.5 pf/ft. nom.conductor-to-conductor41 pf/ft. nom. conductorto-shield20.4 pf/ft. nom.conductor-to-conductor37.5 pf/ft. nom.conductor-to-shieldInductance 0.16 uH / ft. nom. 0.125 uH / ft. nom. •Bend Radius 1.6” [40.6 mm]min. 1.7” [43.2 mm]min. 1.6” [40.6 mm] min. 1.6” [40.6 mm] min.Pull Tension 24 lbs. [10.8 Kg] max. 36 lbs. [16.3 Kg] max. 14 lbs. [6.4 Kg] max. 14 lbs. [6.4 Kg] max.LITPROPLEXTA4-061113

“P” series data cables are built to survive the toughestconditions, yet handle and coil well, again and again and again.They have been exhaustively developed, tested and re-tested.When data transmission is critical, there is only one option.• Cable is RoHS compliant• TMB UK and Canada cable assemblies RoHS compliant• TMB US cable assemblies RoHS compliant by request

PC222P, PC224P: Extra-rugged, flexible data cables, double-shielded, low capacitance. Suitable for MIDI, DMX512, RS485/RS422 and other formats in portable applications.PCCCT: Rugged, flexible combination power and control cable for color changers.TESTING: All ProPlex data cables are tested to specifation as follows: Hi Pot, Continuity, Impedance, and Capacitance.PC222P PC224P PCCCTConductors 22 AWG [0.34 mm 2 ] Tinned, annealed copper stranded 19 x 34Data pair: 22 AWG [0.34 mm 2 ] Tinned,annealed copper stranded 19 x 34Power: 14 AWG [2.5 mm 2 ] Tinned,annealed copper stranded 41 x 30Insulation200° C, 300 Volt FEP.Nom. wall: 0.015” [0.38 mm]Min. wall: 0.013” [0.33 mm]80° C, 300 Volt PolypropyleneData pair:Nom. wall: 0.012” [0.30 mm]Min. wall: 0.008” [0.20 mm]Power:Nom. wall: 0.012” [0.30 mm]Min. wall: 0.009 [0.23 mm]Color Code Black/White Black/White, Red/GreenData pair: Red/GreenPower: Black/WhiteAssemblyShieldDrainJacketPairs cabled with Kevlar strength memberInner: Aluminum / mylar, 100% coverageOuter: Tinned copper braid, 85% coverageNoneBlack polyurethaneNom. wall: 0.060” [1.52 mm]Elongation: 550%Tensile strength: 5,000 psiHigh pressure extrusionPower singles cabled around shieldeddata pair w/drain wireAluminum / mylar around 22 AWG pair,aluminum in, 100% coverage22 AWG [0.34 mm 2 ] Tinned, annealedcopper stranded 19 x 34Black PVCNom. wall: 0.040” [1 mm]Elongation: 300%Tensile strength: 2,000 psiPhysicalOutside diameter: 0.215”[5.46 mm] nom.Weight: 29 lbs. per 1,000 ft.[41.3 Kg/Km]Outside diameter: 0.285” [7.24mm] nom.Weight: 45 lbs. per 1,000 ft.[64 Kg/Km]Outside diameter: 0.290” [7.37 mm] nom.Weight: 73 lbs. per 1,000 ft. [104 Kg/Km]Temperature Plus 105° C, minus 40° C Plus 90° C, minus 20° CConductivity14.5 Ohms (max.) per 1,000 ft. @ 25° CData pair: 15.5 Ohms (max.) per 1,000 ft@ 20° CPower: 2.75 Ohms per 1,000 ft @ 20° Cnom.CharacteristicImpedance80 Ohms 110 Ohms Data pair: 60 OhmsCapacitance22pf / ft. nom. cond.-to-cond.41pf / ft. nom. cond.-to-shield13pf / ft. nom. cond.-to-cond.25pf / ft. nom. cond.-to-shieldData pair: 25pf nom. cond.-to-cond,44pf nom. cond.-to-shieldInductance 0.32 uH / ft. nom. 0.31 uH / ft. nom. •Bend Radius 1.3” minimum 1.75” minimum •LITPROPLEXPA4-112712

Figure-8 PowerData CablePCCAT5EP3X2.03x2.0 mm 2 Power + CAT5e DataUnique figure-8 configuration allows easy termination anddurable, long-lasting power/data breakout.Ethernet . . . and Power!DMX . . . and Power!Line Audio . . . and Power!Coms . . . and Power!Use EtherCONs andProPlex Sneak Snake forup to 4 Universes of DMX. . . and Power!ProPlex PowerData PCCAT5EP3X2.0 eliminates the need for bandingdata and power cables together. The cable comprises CAT5e data and3x2.0 mm 2 power, combined in a single figure-8 configuration – likea zip cord. The figure 8 configuration reduces electronic interferencebetween power and data lines and also breaks out easily, without theinconvenient sleeving necessary when power and data conductorsare combined under one jacket. The verified CAT5e data cablecomponent contains four twisted pairs of 24 AWG stranded coresin an SF/UTP structure with foam insulation, Kevlar strengtheningmembers, with foil and braid shielding. The power cable componentcontains three 2.0 mm 2 XLPE-insulated cores. Both cables arejacketed with a UV-resistant FRPVC compound. PCCAT5EP3X2.0complies with IEC 61156-6 and EIA/TIA 568B.2 work area cablestandards, plus European Directive 2002/95/EC (RoHS).Power and data cables can beeasily split to any length.TMB recommends point of split bereinforced with glue-filled shrink.

1. Detailed description1.1. CAT5e data, twisted pairs1.1.1. Colour code table:Blue X WhiteOrange X WhiteGreen X WhiteBrown X WhiteTable 1 – Table Transmission 1 – Transmission performance performance (per each (per cable) each cable)Cat. CablesCAT5e Work Area CablesIEC 61156-6 Ed. 2IEC EIA/TIA 61156-6 568-B.2 Ed. 2EIA/TIA 568-B.21.4. Outer jacket:1.4.1. Material: UV resistant FR-PVCcompound1.4.2. OD per each cable: 8.3 mm ± 0.2mm.1.4.3. Overall dimensions: 17.3 X 8.6 ±0.4 mm1.1.2. Core material: Bare copper.1.4.4. Colour: Black or per request.1.1.3. Core OD: 7x0.203 mm nom.2. Electrical characteristics – data section1.1.4. Insulation material: Foam PO.2.1. Pair mutual capacitance: 57 [pF/m]1.1.5. Over insulation OD: 0.99 mm nom.TELDOR Cables & Systems Eng.2.2.Dept.Pair characteristic impedance: 100 ± 15 [Ω]1.1.6. Dielectric strength: 700 Vrms/min.Cable Design Technical Specification 2.3. Transmission performance (see table 1)1.2. Data cable assembly3. Flame test: Design to comply with IEC 60332.11.2.1. Structure: 4 pairs together withand UL1581 VW-13x14/41 + [4x2x24/7AWG SF/UTP] Cat. 5eCable DescriptionKevlar strength members.4. Environmental: Per IEC 61156-6 and ISO/IEC1.2.2. Shields: Overall aluminum Durable foil 100% work area 11801 composite cableCable coverage P/N and TC braid 65% min. 98TMB64xxx5. RoHS compliance: 2002/95/ECcoverage.Date: 17 Aug 2010 Edition:1.0 6. Installation Eng.: and Jacob operational Ben Ary considerations:1.3. 3x2.0 mm 2 Power cable assembly6.1. Min bending radius: 70 mm (small axis)1.3.1. 2.3.5. Cores: structure: Bare copper 3 conductors 2.0 mm 2cabled together and wrapped with non-woven6.2. Cable weight: 195 Kg/km [131.01.3.2. separation Insulation: tape. XLPE compound 1000Vlbs/1000ft]2.4. Outer rated jacket:6.3. Working temperature range: -30°C to +1.3.3. 2.4.1. OD: Material: 3.0 mm UV (0.11") resistant FR-PVC compound 70°C1.3.4. 2.4.2. Colour OD per code: each Brown, cable: 8.6 Blue, mm Green/ ± 0.2 mm. 6.4. Max. Tensile force (short term): 190 N.2.4.3. Yellow Over all (other dimensions: available) [17.3X8.6] ± 0.4 mm1.3.5. 2.4.4. Core Color: structure: Black or 3 per cores request. cabled3. Electrical together characteristics and filled – with data filling section3.1. Pair mutual compound. capacitance: 57 [pF/m]3.2. Pair characteristic impedance: 100 ± 15 [Ω]3.3. Transmission performance (see table 1)Freq.MHzAttenuation20%Attenuation50% (26AWGPS NEXT LossdBNEXT LossdBRLdBPS ELFEXTdBELFEXTdB(24AWG andlower)dB/100m20 o Cand higher)dB/100m20 o CTypical Standard Typical Standard Typical Standard Typical Standard Typical Standard Typical Standard Typical Standardvalue. Value value. Value value. Value value. Value value. Value value. Value value. Value1 2.4 2.5 3.1 3.2 68.3 62.3 71.3 65.3 22 20 64 61 67 644 4.8 4.9 5.8 6 59.3 53.3 62.3 56.3 25 23 52 49 55 5210 7.6 7.8 9.2 9.5 53.3 47.3 56.3 50.3 28 25 44 41 47 4420 10.8 11.1 13.1 13.5 48.8 42.8 51.8 45.8 28 25 38 35 41 3830 13.4 13.8 16.2 16.8 46.1 40.1 49.1 43.1 27 23.8 35 31.5 38 34.560 19.4 20 23.5 24.2 41.6 35.6 44.6 38.6 24 21.1 28 25.4 31 28.4100 25.5 26.4 31 32 38.3 32.3 41.3 35.3 22 18.8 24 21 27 24150 32.1 N/A 38.9 N/A 36.2 N/A 39.2 N/A 21 N/A 17.5 N/A 20.5 N/A250 43 N/A 52 N/A 32.1 N/A 35.1 N/A 20 N/A 13.1 N/A 16.1 N/A300 48 N/A 57.8 N/A 31.2 N/A 34.2 N/A 19 N/A 11.5 N/A 14.5 N/A350 52.5 N/A 63.3 N/A 30.1 N/A 33.1 N/A 19 N/A 10.1 N/A 13.1 N/ALITPPXPOWERDATAA4-040413

Carry multiple DMX512 universes over a single CAT5e cable!Custom Break-in and Break-out assemblies easily convert four DMX lines to a singleNeutrik etherCON connector. The snake itself is just a single ProPlex CAT5e cable!• Future forward – the cable is an off-the-shelf ProPlex CAT5e cable with etherCON connectors.Use it for GigaBit Ethernet if you no longer need it for DMX.• Economical – no expensive specialised connectors.• Tough – road-proven ProPlex and Neutrikcomponents.• Hermaphroditic – No wrong end at FOH.• Available in 2-, 3-, and 4-universe versions(see back). All utilize the same ProPlexCAT5e cable.• Standard tail length 1.5 metre, custom lengthsavailable by request.• Can be used in conjunction with a ProPlexCAT5e Snake for more universes or a hybridDMX / Ethernet solution.• “Sneak” multiple DMX universes overeconomical CAT5e cable!

Standard 4-Universe Sneak Snake• Utilizes the shield of the ProPlex CAT5e cable to carry the common pin of all four universes• Requires the use of a shielded CAT5e cable such as ProPlex PCCAT5EP and shielded RJ45 connectorsPair Wire ColorRJ45PositionFunction1White/Orange 1 Data 1 +Orange 2 Data 1 -2White/Green 3 Data 2 +Green 6 Data 2 -3Blue 4 Data 3 +White/Blue 5 Data 3 -4White/Brown 7 Data 4 +Brown 8 Data 4 -Shield/DrainCommon pinsof all data pairsAlternative Sneak Snake configurations also available2- and 3-universe versions offer fewer universes but deliver unprecedented flexibility in cabling DMX over CAT5. In addition torunning two or three universes to FOH over an ultra-tough ProPlex CAT5e cable, the break-in and break-out assemblies can beutilized with other cabling options:Premise wiring – Lecture halls, ballrooms, and corporate buildings. Run your console over CAT5 or CAT5e premise wiring! Useany UTP CAT5 cable to get from a wall jack in one room to control DMX devices in another room. (Make sure that the circuitsare patched directly to each other in the patchbay and not to any Ethernet equipment. Lengths of 1,000ft are possible. Inpractical terms, a maximum length of 500ft/150Meters is recommended.)Emergency backup cable – We all know the danger of heavy vehicles near FOH snakes. Even a ProPlex cable can succumb to abulldozer. Since the cable is a reasonably priced single ProPlex CAT5e, you can afford to have a spare. Or if you’re really in apinch, you could go to the nearest office supply store and find something to get you through the show.3-Universe Version• The common pins of allthree universes are bussedover pins 7-8 of the RJ45• Can be used with CAT5UTP cablePair Wire ColorRJ45PositionFunction1White/Orange 1 Data 1 +Orange 2 Data 1 -2White/Green 3 Data 2 +Green 6 Data 2 -3Blue 4 Data 3 +White/Blue 5 Data 3 -4White/Brown 7 Common pinsBrown 8 of all data pairsShield/Drain unused2-Universe Version• Data over the first two pairs. Eachpair has a discrete common lead.• Fully compliant with USITT/ESTAstandard practice for DMX512 overCAT5• Can be used with CAT5 UTP cablePair Wire ColorRJ45PositionFunction1White/Orange 1 Data 1 +Orange 2 Data 1 -2White/Green 3 Data 2 +Green 6 Data 2 -3Blue 4 UnusedWhite/Blue 5 Unused4White/Brown 7 Data 1 CommonBrown 8 Data 2 CommonShield/drain unusedLITPPXSNEAKA4-053112

Portable MulticablesThe economical solution for professional 6-circuit applications.Conforms to EU harmonized standards.WDP18X1.5WDP18X2.5GENERALFlexible 18 core multicable for distribution of six “1K” or “2K”lighting circuits.CROSS SECTION 18 x 1.5 mm2 (16 AWG) 18 x 2.5 mm2 (14 AWG)CORESFlexible Plain Copper, as per IEC 228 CL5STRANDING 30 / 0.25 mm [30/30 AWG] 50 / 0.25 mm [50/30 AWG]INSULATIONASSEMBLYJACKETPVC thermoplastic compound, self extinguishing. 17 x blackconductors + 1 ground conductor. Cores sequentially numberedwith white ink every 25 mm. Configuration of cores corresponds toindustry standard 19-pin connector contacts.Nominal wall thickness: 0.64 mm [0.025”]Flame retardant to IEC332-3, CE 20-22 11Working Voltage: 300/500vTest Voltage: 2500vContra-helical lay-up around a central PVC filler.Talc between outer jacket and cores for easy stripping.Matte black pressure extruded PVC thermoplastic compound, selfextinguishing. Interstices filled to reduce movement and twisting ofcores Excellent resistence to most organic and inorganic chemicals.Nominal wall thickness: 2.55 mm [0.1”]Flame retardant to IEC332-3, CE 20-22 11MARKING18x1.5MM2 300/500V 70 DEGREEC CE STARCABLE [indent print]18x2.5MM2 300/500V 70 DEGREEC CE STARCABLE [indent print]OUTSIDEDIAMETER16.05 mm [0.632”] Nominal 18.1 mm [0.713”] NominalWEIGHT 485 Kg/Km [326 lbs./mft] 800 Kg/Km [538 lbs./mft]TEMPERATUREBEND RADIUSAPPROVALSPortable usage: minus 5° C / plus 70° CInstallation usage: minus 30° C / plus 70° CPortable usage: 13 x O.D.Installation usage: 7.5 x O.D.In accordance with harmonisation standards, CE73/23EECThe data produced in this document is not binding and can be varied as a consequence of modification and / or improvementdeemed necessary by tmb.LITSTARCABLEA4-060512

19-PIN CONNECTORSInline connector shown with PG-29 glandstylestrain relief threaded into backshell.• Fully compatible with Socapex “419” and other industry-standard 6-circuit connectors• Rugged die-cast aluminum backshell and machined aluminum locking ring• Non-conductive black anodized finish• Hard gold-plated contacts• Integral compression-type strain relief handles a wide range of cable sizes• Threaded backshell also accepts standard PG-29 gland-type strain relief• Extended ground contacts allow make first, break last operationSocapex is a registered trademark of its owner.

19-PIN CONNECTORSNumber of Contacts 19Contacts ConfigurationPart Number Description Unit WeightKC19CF Panel Female 0.10 KgKC19CM Panel Male 0.14 KgKC19LF Line Female 0.20 KgKC19LM Line Male 0.24 KgRated Current / Voltage20A 250VACOperating Limit Voltage (v.)400VACRated Voltage (v.)1500VACInsulation Resistance (MΩ Min.) 2000Contact Resistance (MΩ Max.) 3Operating TemperatureTerminal Wear-40 to +85° C5000+ ConnectionsLITKC19A4-040612

19-PinConnectors• Compression strain relief with available inserts for all cable configurations,including break-out.• Fully compatible with Veam “VSC” and Socapex “419” connectors.• Extra-rugged, machined aluminium insert and backshell.• Hard gold-anodized contacts available in solder & crimp versions withextended ground contacts standard.• Durable, scratch-resistant black anodized finish.• Highest level of quality and workmanship.Veam “VSC” and Socapex “419” are registered trademarks of their respective owners.

SPECIFICATIONSNumber of Contacts 19Rated Current / Voltage 20A / 250VACOperating Voltage Limit 400VACRated Voltage1500VACInsulation Resistance 2000 MΩ Min.Contact Resistance 2 mΩ Max.Operating Temperature -40 to +85° CTerminal Wear5000+ connectionsIP RatingIP67 When MatedStrain Relief Bushing Compatibility18x1.5mm 2 Multi-Cable17mmProCable PC161818x2.5mm 2 Multi-Cable23mmProCable PC1414ProCable PC1419ProCable PC121428.9mm ProCable PC1214SEOProCable PC1219ProCable PC101412/3 SJO X 6Break-out14/3 SJO X 649.5mm(1.949”)1 1/4” NPT52mm(2.047”)59.5mm(2.343”)53.5mm(2.106”)80.5mm(3.169”)27mm(1.063”)LITPS19A4-052912

7-Pin Connectors• Fully compatible with other industry-standard 7-pin motor connectors.• Rugged die-cast aluminum backshell and machined aluminum locking ring.• Non-conductive black anodized finish.• Hard gold-plated contacts.• Integral compression-type strain relief handles a wide range of cable sizes.• Extended ground contacts allow make first, break last operation.

7-Pin ConnectorsKC07LFKC07LMKC07CFDimensions in MMNumber of ContactsContacts Configuration6x16AWG + 1x12AWGPart Number Description Unit WeightKC07CF Panel Female TBDKC07LF Line Female TBDKC07LM Line Male TBDRated Current / Voltage6x25A+1x50A 250VOperating Limit Voltage (AC. V. rms)250VACRated Voltage (AC. V. rms) 1 minute2000VACInsulation Resistance (MΩ Min.) at DC 500V 2000Contact Resistance (MΩ Min.) at DC 1A 3Operating TemperatureTouch TensionPressureTerminal Wear-40 to +85° C2 Kg1800 VAC/MIN5000+ ConnectionsLITKC07A4-051812

Durable RJ45 backshell!For entertainment and industrial hard use.Prevalent use of RJ45 connectors in thestage world has created the need for aroad-worthy RJ connector. The patentedProShell converts a conventional RJ45connector into a robust connectorsolution capable of repeated connectionswhile maintaining mechanical andelectrical integrity. The only solutionavailable that doesn’t require specializedconnectors at both ends, the ProShell canbe used with standard hardware.Available PackagingPart Number DescriptionPRJ0-BK/2 Dealer Pack, Black (Pk/2 Shell)PRJ0-BK/2T Dealer Pack, Black (Pk/2 Shell/Cap)PRJ0-BK/10 Bulk Dealer Pack, Black (Pk/10 Shell)PRJ0-BK/10T Bulk Dealer Pack, Black (Pk/10 Shell/Cap)PRJ0-BK/100 OEM Pack, Black (Pk/100 Shell)PRJ0-BKCAP/25 OEM Pack, Black (Pk/25 Cap)Features:• Fits standard attachable RJ45 connectors• Strain relief holds cable securely• Protects RJ45 locking mechanism (latch)from breaking off• Profile fits high-density hubs and switches.Will not block adjacent ports• Ergonomic design for easy handling• Label indent fits standard size label foreasy marking• Color coded; available in all resistor colors• Completely removable and reusable• Shaped to easily pull longer cables throughnested cables• Optional cap protects contacts whenlonger cables are dragged during coilingFrom TMB. Supplying industry professionals worldwide with “ruggedized” technology since 1983!US Patent: 7,431,604 B2

Dimensions in inchesLITPROSHELLA4-052912

LITARNOLDA4-030712

Real-Time Media CompositingPandoras Box Version 5

Real-Time Media CompositingPandoras Box Version 5You’ve got the skills.We’ve got the tools.Pandoras Box Version 5 is the new and highly anticipated next step inthe evolution of the Pandoras Box product family. The award winningreal-time Video Processing and showcontrol system has been furtherextended to fully cover the entire workflow from the project conceptionto the final realisation. One idea. One system. One successfulproduction.Product HighlightsNEWVideo Export & RecordingThe video export offers users to greatly improve their workflow and exportentire scenes as HD video while having the flexibility of a real-timeediting system. For live video ingest, you can now record & capture fromany live input source up to 2K/HD.NEWAeon FX EngineThe dynamic shader effects engine enables users to create andcombine an almost unlimited number of effects. Alleffects and animations are automatically synchronizedacross the system network.NEWFireFly 3D Particle SystemFireFly allows for the creation of elaborate real-time particleeffects in a true interactive 3D compositing space. Variousemitters can be setup and applied with forces such as Wind & Gravity.NEWQUAD HD OutputScreenshot of the Pandors Box Editor InterfaceVersion 5 is more than just a collection of powerful new features.It is the beginnning of a new era in the field of real-time mediacompositing. coolux Pandoras Box Version 5 is taking the userexperience to a new level of creativity. We at coolux want ourcustomers to share our passion for technology that frees creativity fromtechnological limitations.The new QUAD Server and QUAD Player workstations offerusers up to four independent HD DVI outputs with built-in EDIDManagement.NEWASIO Multi-Channel AudioThe Pandoras Box Manager Software now supports ASIO audiointerfaces and offers synchronized multi-channel audio playback.EROS RAMAZOTTI TOUR 2010 - Video Design by Olivier Goulet

Version 5 Key FeaturesUsing coolux Pandoras Box Version 5 will help you maximiseyour project workflow efficency and enables you to combine amaximum of creative possibilities with great reliability. Onesystem from start to finish.The new features make it possible to stay within the cooluxPandoras Box user interface from the first stages of content creationright up to the final production display. One idea can progressthrough all the necessary production stages whilstensuring maximum compatibility and effectiveness.NEWConsole Mode & Advanced PatchingWith the new dynamic layer structures, users can now easily addmore parameters and effects to any layer. In order to facilitatethe control, users may start Pandoras Box in a dedicated ConsoleMode or simply create and extend the DMX library from within theinterface. This means that any parameter can now be individuallypatched.NEWDirect Content InterfaceIt is now possible to select, move, rotate and scale contentdirectly within the Preview interface. This allows faster editing andintuitive layer composition.Project Workflow End-To-EndDesign PhaseProduction PhaseContentCreationTechnicalSpecificationShowSetupShowEditorManager/Manager / WDServer / PlayerContent Finishing,Control & PlayoutNEWLive-Input RecordingMedia-Net Configuration ExamplePandoras Box Version 5 closes the gap between the designand production phase, resulting in a perfectly aligned workflowenvironment.Pandoras Box servers now make it possible to record live-video fromany HD SDI or DVI source directly to HD MPEG. (DirectShow Inputsare also supported.)NEWLayer FlexibilityIt is now possible to re-structure individual layers easily per drag &drop. This way the rendering order can be instantly re-ordered andorganized according to your project setup. Arranging your layerstructures has never been easier.NEWUnlimited Graphics & Source RoutingCreate and add any number of graphic layers depending on yourproject needs. Make use of the new efficient source routing to routeany video layer sources to any other layer.

Touch Free ControlAirScanIR-Laser Multi-TouchMotion controlled user interfaces add a new dimension to interactivemultimedia display and presentation solutions. The coolux AirScansystem combined with the Widget Designer PRO allows for touchfree interactivity. They offer the opportunity to interact with digitalcontent in ways not possible with traditional displays.The AirScan control interfacesallow for custom design andintegration of interactive displaysthat let users navigate menu basedmultimedia presentations in anyenvironment.As part of a Pandoras Box Playbacksolution Full HD video presentationscan be controlled from anydistance and projected onto anysized screen with no mouse orpointing device required.Advanced Motion StabilizingThe built-in motion stabilizer allows these advanced inputdevices to be used on large scale displays by offering highspeed processing and damping of the sensor motion data.Dynamic Gesture Menu ProgrammingWidget Designer PRO allows thedesigner to set up unlimitedmenu page configurations,allowing the interactivedisplay to be easilycustomized.The Widget DesignerPRO interface requiresno special programmingskill and is quicklyset up.Large Scale Scanning RangeTouch free solutions can be set up and integrated for variousapplications. AirScan can be used at distances of up to10 m / 30ft. It features up to 24 Multi-Touch points.AirScan setup asmulti-touch interface

Touch Free ControlAirBarAirBar FeaturesThe AirBar system is based on a measuring infrared light curtain.The unit provides min/max and hole detection for further controlprocessing.A single system consists of a transmitter and receiver bar and connectsto Widget Designer PRO via an RS232 interface.With a minimum pitch of 5mm AirBars offer high resolutionmotion data that can be linked to one or more Pandoras Boxplayback systems for mouse, layer or parameter movements.Please feel free to contact coolux orone of our partners for further questionsand let us know how you wouldlike to implement AirBar solutions inyour projects.Two systems can be combined forexample to locate individual intersectionsfor mouse movements andbutton control.By measuring the distance betweentwo intersections distance and anglevalues can be retrieved to control.2D or 3D video rotation and scaleparameters.AirBartransmitter& receiverwith 5mmLED pitchIn the example shown a possiblescenario could be:• X&Y motion controls layer positioning• X distance controls layer scaling• Y distance control layer rotationFor two axis and multitouch control multiple systems can be combined.With Widget Designer PRO all settings can be configured andchanged per page, which offers an outstanding flexibility insetups for interactive menus.The maximum length per sender/receiver pair is 3200mm and up to 4pairs with up to 512 beams can be processed at once.AirBar allows the designer to use multiple sender/receiver pairs toretrieve X&Y input coordinates that can be assigned to any deviceparameter within the Pandoras Box control architecture.Single sender and receiver pairs can be set up for single axis controland distance measuring. This allows AirBar to control the motion andscaling at the same time.Individual gestures like left, right, up or down motion can be assignedto run customizable scripts and controls.The possibilities are countless.Single axis control with a vertical AirBar for horizontal motion.

Real-Time Content CreationPandoras Box EditorYou’ve got the skills.We’ve got the tools.The Pandoras Box Editor is a state of the art 2D/3D contentediting and compositing system. It combines a great range ofnew features that make it an extremely powerful tool forinteractive content production.This software only solution is an advanced real-time rendering systemthat combines non-linear editing and 3D compositing tools.The Editor is ideally suited for use in the show, broadcast or installationsector. Using the Editor in conjunction with other cooluxproducts will help you boost your content workflowefficiency.All Pandoras Box systems share a unique user-interface thatallows a fast editing and project workflow.NEWVideo ExportThe Editor features an integrated 3D geometry editing system. Frameaccurate rendering is combined with FluidFrametechnology to allow for a reliable mixed framerate support. Users canexport their media as either 2K/Full HD video or image sequences.NEWAeon FX EngineThe new coolux effects engine offers users a truly dynamicand comprehensive shader effects system supporting customFX creation. With the support of modern graphics hardwareacceleration, all effects can be pre-viewed in real-time.NEWFireFly 3D Particle SystemScreenshot of the Pandors Box Editor InterfaceCreate mind blowing motion graphics with the help of the FireFlyParticle System. Each emitter supports individual 3D geometry andindependent video textures. You can even add physical forces like wind& gravity and control the animation over the particle life time.Mando Diao Tour – Video Design by LOOP LIGHT

Real-Time Content CreationPandoras Box EditorSoftware FeaturesThe Pandoras Box Editor enables designers and contentcreators alike to harness the creative powers of the awardwinning Pandoras Box product family without the need tobuy any additional hardware processors.This software only solution is perfect for creating stunning Full HDcontent in real-time. Fast, efficient,creative. The Pandoras Box Editoris a versatile design tool for users aiming to create high definitioncontent in a 3D environment.Unique User InterfaceThe Editor shares a unique view based user-interface with all PandorasBox products that allows for a fast configuration and an efficientprogramming workflow.Detailed Features• 3D Layer Composition• Video Export & Recording• Multi-Channel ASIO AudioAeon FX EngineScreenshot of the Pandors Box Editor InterfaceUnlimited EffectsThe Editor effects engine enables users to create and use an almostunlimited number of effects that can be freely combined. Exporteffects as an MPEG file and re-integrate them into the timeline to createeven more effects within effects.3D GeometryAll media and effects can be arranged and animated in a true 3Dcomposition space. Each layer supports 3D geometry (.x files) foradvanced UV Mapping. Create dynamic effects and cameramovements for stunning motion graphics.• Dynamic FX Engine• Keying, Masking• Motion Effects• Texture Effects• Geometry Effects• Compositing• Custom FX Support• Layer and Texture Blending• 3D Camera Parameter• Independent Viewpoint and Target• Field of view and Aspect Ratio• Lens Shift X&Y OffsetFireFly 3D Particle System• Dynamic 3D Particle Systems• Layer independent emitter settings• Emitter based Texture & Object• Point, Line, Ring, Sphere Area Emitter• Physical Force System: Gravity & Wind• Animation over particle life time

Real-Time Show ControlPandoras Box ManagerDirect. Intuitive. Fast.The Pandoras Box Manager re-defines real-time editingand playback control. This standalone software allowssynchronization and remote control of all Pandoras Boxmedia playback products via network.The built-in sequences and cue based timeline interfaceenables you to control Pandoras Box Servers, Players as wellas interfacing with all kinds of external controllers via TCP/IP, Serial RS232/422, SMPTE, DMX, Art-Net, analog and digitalindustrial sensors.The Manager acts as both, a remote file manager and a master, synchronizingany connected client system with sub-frameaccuracy for demanding applications.Similar to standard compositing and non-linear editing softwaresolutions, the project orientated user-interface is quick and easy tolearn.All Pandoras Box systems share a unique user-interface thatallows a fast configuration and programming workflow. Theinterface is context-sensitive and optimized for live applications.The system is open for multiple input protocols and offers an easyand direct access to all controls. Individual view layouts allow youto arrange the interface the way you want by creating new tabs andviews that can be stored and recalled on the fly.NEWVideo Export & RecordingThe video export offers users to greatly improve their workflow andexport entire scenes as HD video while having the flexibility of areal-time editing system. For live video ingest, you can now record &capture from any live input source up to 2K/HD.NEWASIO Multi-Channel AudioScreenshot of the Pandors Box Manager InterfaceThe Version 5 Manager now supports all common ASIO sound cardsand offers audio and video playback synchronization to the audioclock.MACBETH - Kennedy Center Washington

Real-Time Show ControlPandoras Box ManagerSoftware Key FeaturesAll Manager systems provide timeline editing with the PandorasBox Media-Net synchronization and remote file management.TheManager connects to any Pandoras Box Server or Player via networkand provides remote control as well as automatic file spreading to allconnected playback clients.Full ControlLike all Pandoras Box products you may choose from one of the manyprotocols to control the system. You may use the powerful featuresof the built-in timeline or connect a DMX console to get full access toall parameters. TCP/IP, SMPTE, RS232/422, Art-Net, DMX512, MA-Net,SACN, MSC are currently supported.GENOME – THE SECRET OF LIFE – System Design by Michel HelsonDepending on the budget, size and complexity of your project,Pandoras Box Manager is available in three versions.Pandoras Box Manager PRO• Unlimited timelines• 32 Multi-Channel ASIO Audio Tracks• New Fader Board and Jog Shuttle ControllerPandoras Box Manager STD• 8 independent timelines• 16 Multi-Channel ASIO Audio Tracks• New Jog Shuttle ControllerHyundai product presentation at Salon Mondial 2010 - courtesy of LOOP LIGHTIntegrated Fader board ControllerFor intuitive live editing Pandoras Box Manager ships with an external JogShuttle Controller (STD & PRO versions) and an additional Fader Board tocontrol up to 8 timelines simultaneously (PRO version only).A 19” Workstation is available upon request.Pandoras Box Manager LT• Software-only• Two independent timelines• 8 Multi-Channel ASIO Audio TracksOptional AccessoriesNEWFader Board and Jog Shuttle ControllerNEW• 19” Workstation with optional ASIO sound cards• Dual HD-SDI input board for Workstation• Dual DVI input board for Workstation• DMX Link In USB interface• DMX Link Out USB interface• SMPTE Link, USB Timecode input or output interface

Compact Software SolutionPandoras Box PlayerPowerful. Visionary. Flexible.Pandoras Box Player systems offer ideal, cost-effective softwaresolutions for professionals with multi-media requirements. Upto 4 video-layers and unlimited graphic-layers are available tobe programmed and arranged quickly and easily.Several easy-to-use dynamic effects as well as FULL HD playback turnthe Player into a powerful tool for creative projection and design.Pandoras Box Player can be setup as a standalone playbackdevice, network playback client or in console mode for direct DMXControl.Either flat or shaped projections can be set up with multiplePlayers. Each output can be blended and warped independently tomatch any number of geometrical shapes.No matter what your particular project specifications might be, thehighly cost effective coolux Pandoras Box Player systems will perfectlyfit your individual requirements.Choose between the NEW Player LT, STD or PRO. AllPandoras Box systems share a unique user-interface thatallows a fast configuration and programming workflow.All Pandoras Box Player systems feature:Synchronized PlaybackNetwork based adaptive frame synchronization allows multiple systemsto run in sync. An optional SMPTE Link Interface canbe used to sync to external sources.Keystone CorrectionPandoras Box PRO Players come with the patented keystonealgorithm that enables you to correct for off-angle distortionsaccurately on the fly.SoftedgeBlending ExampleSoftedge Blending and WarpingSTAR TREK THE TOUR - courtesy of Delicate Productions

Compact Software SolutionPandoras Box PlayerKey FeaturesAvailable as software-only the Pandoras Box Player solution is theperfect companion for small budget projects, digital signage applications,corporate meetings and architectural installations such as bars,clubs and museums.Full HD Output ConfigurationAs the HD format has become the standard for large scaleprojection, all Pandoras Box Player systems support highdefinition video playback and output configuration.Direct ControlLike with all Pandoras Box products, you may choose one out ofthe large number of available protocols to control the system. Youcan use the powerful features of the built-in timeline or connecta DMX console to get full access to all parameters via industrystandard protocols: TCP/IP, SMPTE, MSC, Art-Net, SACN, MA-NET,DMX512 and many more.NEWDual License SupportUse two dongles in a single PC system to double up youroutput and layer count.Video FormatsThe Windows XP/7 based system deals with most DirectShowbased video codecs including Quicktime. For optimum performance ahighdefinition Mpeg Video Engine is included with every Player.An optional HD Mpeg Encoder is also available for direct mediaconversion.VERTIGO - ZurichPandoras Box Player PRO• 4 Video Layers• Unlimited Graphic Layers• Patented real-time Keystone• 4 Dynamic FX per Layer and OutputSIEMENS MEDICAL - fischerandfriendsReal-Time EffectsWith a large number of new visual effects including variouskeying filters accessible to every layer and output, videocomposition is brought to a new level of creative possibilities.The dynamic effects engine allows assigning multiple fx per layer.Fx chains can be created via drag & drop or being remote controlledindividually via Art-Net / DMX512 Matrix Output. The built-in DMXMatrix rendering allows the creation of customized applications,where LED or lighting fixtures are required to be used as pixels forgiant video surfaces.Pandoras Box Player STD• 2 Video Layers• Unlimited Graphic layers• 2 Dynamic FX per Layer and OutputPandoras Box Player LT• Single Video Layer playback• Unlimited Graphic Layers• Softedge and WarpingOptional Accessories• DMX Link• SMPTE Link

Compact Hardware SolutionNEWPandoras Box DUAL and QUAD PlayerFollowing the huge success of the original coolux Pandoras BoxPlayer, the new QUAD and DUAL Player hardware systems combinethe versatility of the software only solution with multiple outputsand industry leading graphics power. Both the QUAD and the DUALPlayer are perfectly suited for permanent installations and high definitionmultimedia displays.NEW Multiple Outputs andpowerful featuresPandoras Box Player systems offer ideal, cost-effectivesolutions for professionals with multi-media requirements.Up to 8 video-layers and unlimited graphic-layers are available tobe programmed and arranged quickly and easily. Several easy-tocontroleffects as well as FULL HD playback turn the QUAD and DUALPlayer systems into a powerful tool for creative projections, designand installation projects.Softedge Blending and WarpingUp to four outputs can be setup from one system for either flat orshaped projections. Each output can be blended and warped independentlyto match any number of geometrical shapes.Output CorrectionEach output features multiple correction parameters forindividual output configurations. The dynamic FX systemallows for setting up individual color correction per output.NEWNEWAll Pandoras Box DUAL and QUAD Player systems feature:Synchronized FULL HD PlaybackPandoras Box unique Network based adaptive frame synchronizationallows multiple systems to run automatically in sync. An optional SMPTELink Interface can be used to sync to external sources.DUAL Player• 2 IndependentFull HD Outputs• 4x Full HD PlaybackQUAD Player• 4 IndependentFull HD Outputs• EDID Management• 8x HD 720p PlaybackKeystone CorrectionPandoras Box QUAD and DUAL Players come with the patented keystonealgorithm that enables you to correct for off-angledistortions accurately on the fly.The highly cost effective coolux Pandoras Box Playersystems are a powerful and reliable solution for yourspecific project requirements. All Pandoras Box systems sharea unique user-interface that allows a fastconfiguration and programming workflow.US PAVILION SHANGHAI EXPO

Compact Hardware SolutionNEWPandoras Box DUAL and QUAD PlayerKey FeaturesBoth the Pandoras Box DUAL and the QUAD Player are perfect companionpieces for e.g. theatre projects, digital signageapplications, corporate meetings and architectural installations.These reliable hardware systems can also be used in bars, clubs andmuseums as part of long-term fixed installations.The additional outputs included in the QUAD and DUAL systemsmake it possible to create projects and displays that make use of multipleprojectors.Full ControlWith a large number of new visual effects, including advanced keyingfilters accessible to every layer, video composition is brought to anew level of creative possibilities.DMX Matrix OutputThe built-in DMX Matrix rendering allows the creation ofcustomized applications, where LED or lighting fixtures arerequired to be used as pixels for giant video surfaces. Like all PandorasBox products, you may choose one out of the large number ofavailable protocols to control the system.You can use the powerful features of the built-in timeline orconnect a DMX console to get full access to all parameters.Industry standard protocols support any external control via TCP/IP,SMPTE, MSC, SACN, MA-NET Art-Net and DMX512 and many more.MOBILE DOME – fournell ShowtechnikPandoras Box DUAL Player• Dual HD DVI Output • 4x Video Layers• Unlimited Graphic Layers • 2x FX per Layer• Full HD Playback• Blending & Warping• Optional Input BoardsPandoras Box QUAD Player• Quad HD DVI Output • 8x Video Layers• Unlimited Graphic Layers • 4x FX per Layer• Full HD Playback• Blending & Warping• EDID ManagementOptional Accessories• QUAD HD-SDI IN• SINGLE HD-SDI IN• SINGLE DVI IN• QUAD Composite IN• SMPTE Link• DUAL HD-SDI IN• DUAL DVI IN• SINGLE SD-SDI IN• DMX LinkOther input options available on request.Both the QUAD and the DUAL Player hardware systemsare perfectly suited for multi purpose use and installation basedprojects in particular.

Interactive SolutionsPandoras Box Sensor LinkInteractive Screen TrackingAs interactive applications and installations are getting more andmore popular, we are constantly developing new input interfaces tointeract with almost any input technology out there.With the Sensor Link we provide a unique highspeed sensorinterface that is designed for custom installations.Sensor Link allows you to interact with industrial encoders, distometersas well as analog potentiometers and contactclosures.Technical Features• 2x 12V industrial encoder inputswith internal or external reset (GPI)• 2x analog 10V inputs• 8x GPI contact closure inputs Output is TCP/IPat variable frequency between 50-1000HzThe internal sample rate reads incoming data at 7kHz toallow high resolution encoder inputs to be used foraccurate motion sensing.For example at Startrek the Tour, multiple devices were in use to createinteractive motion rides or sets to place the audience right in themiddle of the scene.STAR TREK THE TOUR - courtesy of Delicate Productions

Real-Time Media CompositingPandoras Box Server

Real-Time Media CompositingPandoras Box ServerCreative. Scalable. Reliable.The award winning Pandoras Box Server system offers the best highperformance link between projection and digital image compositing:A turnkey solution that perfectly unites state of the art renderingtechnology with intuitive media- and show control. A high-qualityserver featuring the most powerful render-engine offers real-timecompositing in 3D and allows for projection onto any shape and anysurface.Arrange videos and images freely, change colour, form andposition. Pandoras Box synchronizes all video & audio sources. Onsite3D rendering, composition and editing make Pandoras Box theperfect choice for any live event or multi-media show.Mercedes B-Class Launch - ChinaKeystone CorrectionThe Pandoras Box Servers come with a patented keystonealgorithm that enables you to correct for off-angle distortionsaccurately on the fly. This feature is especially useful for short setuptime or when programming moving projectors.Advanced WarpingThe built-in warping editor lets you create any custom shape withscalable free-form-deformers (FFD) that enable you to wrap almostany screen shape.Softedge BlendingScreenshot User InterfaceThe Softedge Blending feature works hand in hand with thebuilt-in warping technology. This way either flat or shapedprojections can be set up with multiple projectors. Each output canbe offset independently and features individual control of the blendsettings on each side of the output to allow both horizontal andvertical blend setups.BLUE PLANET SHANGHAI EXPO - courtesy of TRIAD

Pandoras Box Server SystemsDUAL Server• 2x DVI/VGA Output• 4x Full HD Playback• Optional Input BoardsThis server type is a powerful multi-purpose system that canbe used for projects in a large variety of markets including(but not limited to) the event-, theater-,broadcast-, touring- and/or installation sector.QUAD Server• 4x DVI Output• EDID Management• 8x Full HD Playback• Optional Input BoardsThe NEW QUAD Server systems are perfectfor projects that require multiple outputs.The QUAD’s great versatility in combination with theadditional inputs available makes it a great choice for largescale panoramic projections, interactive digitalsignage projects and fixed installations.BROADCAST Server• 2x 3G/HD SDI Output• 2x HD-SDI Input• Genlock/Framelock I/O• Optional Input BoardsNEWNEWAll Pandoras Box Servers are available in three versions,which can be equipped with different types of input boards,depending on your individual requirements.A complete content library with over 2000 files isincluded with every Pandoras Box Server.Pandoras Box SERVER PRO• Unlimited Video Layers• Unlimited Graphic Layers• FX & Particle Systems• 2 TB Redundant StoragePandoras Box SERVER STD• 16 Video Layers• Unlimited Graphic Layers• FX & Particle Systems• 1 TB Redundant StoragePandoras Box SERVER LT• 8 Video Layers• Unlimited Graphic Layers• FX & Particle Systems• 500 GB Redundant StorageOptional Accessories• DMX Link USB interface• SMPTE Link, USB Timecode input/output interfaceThe NEW BROADCAST Server offers broadcast professionalsa dual 3G/HD-SDI output solution. The BROADCAST Serverfeatures 2x low latency HD-SDI inputs.Along with its ability to offer subscanline-level synchronizationto external sync sources, the BROADCAST Server can be usedfor multi-system and multi-display applications.Specifications are subject to change.Video Input OptionsDual HD SDIThe HD SDI board supportsall common SD and HD SDIformats such as 1080i (50/60),1080p (25/30), 720p, Ntscand Pal standardsDual DVIDual Full HD 1920 x 1080DVI I/A input. The card canprocess either 1x DUAL LINKDVI input or 2 x SINGLE LINKDVI inputsMedia-Net Configuration Example

Real-Time Media CompositingPandoras Box ServerKey FeaturesOutput ConfigurationAll Pandoras Box Servers feature full HD playback and dual 2D & 3Dstereo output configurations. All video layers can be freely positionedonto any of the two outputs. Both DVI outputs can be set to a resolutionup to 2048x1080 at 60/50hz.Advanced Output SynchronizationThe new Pandoras Box Server Systems are the perfect choice when twoor more synchronized outputs are required. All video layers are internallysynced via the coolux proprietary Media-Net. Virtual Devices allow managementand control of any amount of servers as a single entity.Beyond HDAs the HD format has become the standard for large scale projection,all Pandoras Box Server Systems support high-definition videoplayback, with a maximum playback resolution of up to 4K. Thebuilt-in Media Encoder allows you to convert regular footage as wellas custom resolutions to the right format depending on your projectrequirements.Direct TV - FireFly LAFull ControlLike all Pandoras Box products you may choose from one of the manyprotocols to control the system. You may use the powerful features ofthe built-in timeline or connect a DMX console to get full access to allparameters. TCP/IP, SMPTE, RS232/422, Art-Net, DMX512, MA-Net, SACN,MSC are currently supported.FluidFrame TechnologyFluidFrame is a groundbreaking signal processing algorithm, offering asmooth cross-conversion that can take any input and outputframerate, supporting both interlaced and progressive sources and clips.3D Multi-Layer SystemWith a true 3D compositing environment, up to 32 video- and anunlimited set of graphic layers, Pandoras Box offers a great amount offlexibility for creative real-time media production.NEW Aeon FX Engine & FireFly 3D ParticleSystemDMX Matrix - Post Tower BonnLive Input SD/HD-SDI & DVI ProcessingOne of the key features of Pandoras Box Server Systems is the broadcastquality of the low-latency video and PC input options. Featuring both SDand HD-SDI inputs with as low as 2 frames of processing time, PandorasBox Server Systems come with a set of real-time de-interlacers to processinterlaced camera feeds at full framerate.The dynamic Version 5 shader effects engine enables users to create andcombine an almost unlimited number of effects. FireFlyallows for the creation of elaborate real-time particle effects in a trueinteractive 3D compositing space. Various emitters can be set up andapplied with forces such as Wind & Gravity.DMX Matrix OutputThe DMX Matrix rendering allows the creation of customizedapplications, where LED or lighting fixtures are required to be used aspixels for giant video surfaces.

NEWNEWNEWNEWNEWPlease look at our website www.coolux.comfor the latest Widget Designer updates.

STD PRO ULTInputFilterOutputAirBarAirScanAirScan Multi-PointArt-NetAudioBlack BoxButtonCamera TrackingClockColour PickerCom PortCom ASCII StreamCom Query StringCountdownCounterDMX Link InEmailEncoderEventsExcel ReaderFace TrackingFaderGPSiPhone RemoteJoystickKinectKinesysLabelMedia ControlMIDI In/Note CatchMotion DetectorMouseMulti-Touch Item/PanelOSCPhidgetsPingRandomRSSSensor LinkSequenceSerial Link GPISMSSpace NavigatorSMPTE LinkTextboxText ReaderTimaxTCPTCP ASCII/QueryTrackscanUDP/UDP ASCIIValueVariableWheelWIIXY PanelAdd RelativeAngle to PointDamping PredictionDamping TimedDeltaDynamic TriggerIFJitter ReduceMaxMinPolar>RectangularRange AsymmetricRangeMath Filter NodesABSACOSADDASINATANCeilingCOSDegree>RadiansDivideFloorLogModuloMultiplyPercentPower X^YRadians>DegreeRoundSINSQRTSubtractSUMTANText NodesCompare TextContains TextDate to TextLeading ZerosText CombinerAngular DisplayBar GraphCOM Port MessageCOM Port ASCII StreamDigital DisplayDMX Link OutFaderLabelMIDI Note On/OffMIDI RAW MessageMIDI ValueMousePagePB Device ControlPB Layer ControlPB Layer ShufflePB Sequence ControlPB Sequence SeekPB TextPB Text UnicodeScriptSerial LinkSMPTE Link SpeedTCP MessageTCP ASCII StreamTextboxUDP MessageUDP ASCII StreamValueVideo Player. Vol.Script Nodes:• Com Script• TCP Script• UDP Script• Phidget IR• Phidget RFID

THE CRITICAL LINK BETWEENYOUR CONSOLES AND YOURFIXTURES AND DIMMERS.• Automatically or manually switchesbetween two consoles with up tofour DMX universes each.• Buffers data for longer cable runs.• Tests moving lights and cables.• Diagnoses and displays DMX data.• Captures scenes from consoles forplayback in case of console failure.• Optically isolates consoles from therest of the system.• Peace of mind for criticalproduction applications.SAFETY BACKUP AND CONSOLE SWITCHING• Acts as a safety backup to the main console.• Records or creates up to 10 back-up looks from the mainconsole in seconds. 2048 channels each.• Automatically or manually accesses any or all of the backupin the event of a DMX failure.• Instantly switches between any two DMX consoles with upto four outputs each, with no cable swapping.DMX DATA BUFFERING• Buffers DMX data for extended cable runs.TESTING• Performs all standard DMX test routines (Transmit Some,One, All, Auto Fade One, Auto Fade All channels).• Displays DMX data as decimal, percentage or hex values.• Transparently reads and diagnoses DMX data packets; evenduring a show.• Tests cables through the entire system, including throughopto-splitters.• Tests multiple moving fixtures at any starting address in anyDMX universe using editable fixture libraries.• The DDL has nearly 200 moving fixtures in the PCDownloader fixture libraries.OPTO-ISOLATION• Incorporates opto-isolation on input and output groups toprevent ground loops and static problems.USER INTERFACE• 7 button keypad interface.• Front panel power and console select switches.• Backlit 16x2 character LCD.• Easy to see front panel LEDs display the user configurationand data status at a glance.• Switch selectable 115V/60HZ or 230V/50HZ operation.• User configurations and data memory are retained for over5 years by an internal lithium battery.Worldwide Exclusive DistributionLITDATALYNXA4-040512

DVI ParrotThe EDID Emulator byFeaturingParrot Trainer software• Unique new accessory for the video professional. Allows user-configurable EDID management.• Precise analysis and/or control of all EDID parameters via USB. “Trainer” software included –Mac or Windows.• Standard EDID library supplied or the user can capture and edit, or create their own EDID profilesfrom scratch.• Profiles can be permanently saved as computer files which can be copied, emailed, archived, etc.• Libraries can be imported and exported to share and manage EDID settings.• Trainer software supports multiple Parrots for devices with multiple outputs.• Accessible Mode button and RGB Status LED provide basic hardware control.• Dual-link DVI-I compatible for both high bandwidth digital and analog functionality.• DVI powered for spoofing & capture, USB powered for “training” – no additional PSU required.• Compatible with VESA EDID 1.3 and EDID Extensions EIA/CEA-861 (HDTV support etc.).• Rugged, compact device – only 1.1 inch cable insertion / panel depth.• Elegant and cost-effective solution for the real-world challenges faced bytoday’s video technicians.TOOLBARSTABBED INTERFACESELECTCONNECTEDPARROTSBASICSUMMARYVIEWDETAILEDTIMINGVIEWExclusively Distributed by TMB

DVI ParrotDimensions inInches [mm]LITDVIPARROTA4-081313

America’s Got Talent on NBC (FlexiFlex)Disclaimer: All pictures are of actual events at which RGB Lights products were displayed.They do not, in any way, constitute celebrity endorsement of the product.

OverviewThe FlexiFlex line of LED displays provide full-motion video, graphics, messaging and lightingcapabilities in large format for both indoor and outdoor applications. The modular panels maybe used vertically, horizontally, singularly or as a multi-panel system creating a uniform androbust LED grid. The translucent LED domes present audiences a wide viewing angle and thelow-profile open grid structure allow for ultimate transparency.Flexible, rugged, lightweight and thin, FlexiFlex and FlexiFleXL can be draped, wrapped, hungand adapted to a variety of surfaces.Similar in nature to FlexiFlex, RigiFlex and RigiFleXL are created using a rigid mesh structure forpermanent, customized, or highly uniform applications.RGB Lights manufactures FlexiFlex panels in a variety of standard configurations and will customconfigure the shape, size or resolution to meet your specific needs. Using proven Philips ColorKinetics components, the FlexiFlex line of products combines quality, reliability and innovation.Corporate Meeting (RigiFlex)Trade Show (FlexiFlex)Outdoor Sporting Event (FlexiFlex)Large-Scale Arena Tour (FlexiFlex)

Products1) Maximum viewing angle depends on the lens chosen.

Product AdvantagesFlexible and Adaptable• Lightweight• No rigid framework required• Slim 1.25” depthScalable in Any Direction• Modular panels with easy buckle connector• Horizontal, vertical, diagonal, cylindrical, spiraland other creative layout capabilities• Uniform LED grids over large surfacesSnap-in gridDurable Indoor and Outdoor Applications• IP 66 Components (dry, wet & damp rated)• UL Listed LED Components• Tough aircraft cable constructionVideo Quality Output• Over 16 million additive RGB colors• Instantaneous refresh rate / no latencyComplete with LEDstrandsStandard Video Inputs• DVI, VGA, S-Video or CompositeRapid and Easy Deployment• Field serviceability• Quick connections• No sharp or protruding edges, preventing marring• Rolls or fan-folds for compact, easy shipping

Highlighted EventsAuto Show Display (RigiFlex)Studio Panels (FlexiFlex)Museum of Contemporary Art , Chicago (FlexiFlex)Detroit Auto Show (FlexiFlex)House of Blues, Chicago (FlexiFlex)Disclaimer: All pictures are of actual events at which RGB Lights products were displayed.They do not, in any way, constitute celebrity endorsement of the product.

Trade Show (FlexiFlex)Fashion Show (FlexiFlex)The Beastie Boys (FlexiFlex)The Metro, Chicago, IL (FlexiFlex)Corporate Meeting (RigiFlex)

ApplicationsVideo BannersBackdropsAdvertisingRoom DividersTent InteriorsHanging SignsWrap ColumnsMuseum (FlexiFlex)Scenic FlatsCeilingsSpeaker ScrimsTruss Borders or WrapsStage SkirtsSub-FloorsFabric StructuresHBC Building (iColor Flex)Mobile SignageTrade Show Displays3D ArraysCylindersChicago Symphony Orchestra (FlexiFlex)Disclaimer: All pictures are of actual events at which RGB Lights products were displayed.They do not, in any way, constitute celebrity endorsement of the product.

ConfigurationsOur experts can guide you in choosing the best combination of options for your unique project,utilizing interlocking panels in standard or customized sizes and shapes to create seamlessscreens, panels and other stage elements.Whether you are wrapping architectural features, building a concert-sized video surface ormarketing brands and products, FlexiFlex has a solution to fit your needs.Pitch/Resolution:FlexiFlex and RigiFlex areavailable in the followingpixel spacing:Nodes can be arranged in a straight grid or a diagonal pattern:• 35mm• 50mm• 71mm• 75mm• 100mm• 300mm• Custom PitchStraight Grid PatternDiagonal PatternLens CoverClear Flat LensClear Dome Lens (MX only)Frosted DomeSemi-Frosted Dome (LMX only)Skeleton ColorClear BlackWhite CustomNode ClipBlackWhiteClearCustomNode BaseBlackWhiteClearNode SizeFlexiFlex/RigiFlex (1 LED)FlaxiFleXL/RigiFleXL (6 LEDs)Strand WireBlackWhiteClear

System DiagramSystem SpecificationsTemperature Range: -4°F to 122°FHumidity Range:0 to 95%, non-condensing at 122°F (50°C)Power Input:100VAC – 240VAC auto ranging (50Hz – 60Hz)Power Factor Correction (PFC)Video Input:1024 x 768 DVI, VGA, S-Video or CompositeColors:16.7 millionViewing Angle: 149°Environmental:Panel IP 66 (dry, wet & damp rated)Power supply dry locationNetworking:Standard gigabit networkCertifications:UL / cUL / CE

LED DMX-controlled marquee lightingfor indoor and outdoor applications(Portable and Architectural)● RGB, warm white, and cool white A-type lamp bulbs with E27 screw base.● “Vampire-tap” IDT sockets for flexible lamp spacing on regular two-conductor wirecarrying signal and low-voltage power.● Each system custom-built to suit applications of all sizes.● Hand-held programmer for easy DMX addressing. Rugged rackmount power supply.● Instantly retrofits in existing festoon systems.● A unique look for indoor/outdoor lighting systems, low-resolution video, and more.IMS Universe Drive – Integrates DMX data and power for up to 170 IMS bulbs.(See specs.)

Bulb SpecificationsArchitecturalPortableWhite RGB White RGBLEDs 4 x Cree CLV6A-FKB 4 x Cree CLV6A-FKBLED Brightness 4 x 4500mcd 4 x 4500mcdCCTCool White 7000-9000K N/A 7000-9000K N/AWarm White 3000-3300K N/A 3000-3300K N/APower Consumption 1.8WScrew BaseE27Power Input36VDCData InputDMX (combined with power)DimensionsBulb Only (dia, height) 2” x 3.8” (50 x 96.25mm) 2.35” x 4.25” (60 x 108mm)Bulb + Socket (width, height) 2.1” x 5” (53 x 127.5mm) 2.35” x 5.5” (60 x 139.5mm)Field AddressableOptional remote hand-held bulb programmer (addresser)DMX Channels 1 3 (Red, Green, Blue) 1 3 (Red, Green, Blue)MaterialFrosted glass globe w/UV-resistant plastic collar Semi-transparent UL94 certified plastic globe w/and E27 metallic screw base 1 plastic collar and E27 metallic screw baseBulb ShapeA-type lampExterior ColorWhite1For outdoor installs apply a thin coat of silicone grease to bulb’s metal screw base before inserting in socket. Use rubber grommet (O-ring) supplied withIMS sockets for proper mating of bulb and socket.ElectricalPhysicalUniverse Drive SpecificationsOperating Voltages 90-260VACFrequency Tolerance 50-60HzPower Consumption 316WNumber of Outputs 2Output Voltage 36VDCOutput Amperage 8.5A across both outputs, 5A max on one outputMax. number of bulbsper Universe DriveInputsOutputsDimensionsColor170 across both outputs , 126 max on one output(e.g. if 126 on one output, only 44 on the other) 21 power input (Neutrik PowerCON 20A)1 DMX 5-pin input2 power/data string outputs (2-pole Neutrik SpeakON)1 DMX 5-pin thru17.25” x 3.5” x 10” (438 x 88 x 251mm)Blue2Max. total bulbs per Universe Drive is 170 depending on spacing and distance. Multiple strings may beused (not to exceed 170 bulbs per Drive). Please refer to tables below.Power InputDimensionsWeightBulb ConnectorHand ProgrammerSpecifications9VDC (battery oradapter)Recommended battery:Alkaline 9VDC/320mAh,high-current.9.2” x 4” x 1.5”(230 x 100 x 40mm)0.85 lbs. (0.38 kg)E27 Socketlead-incable [m]81530455060Max. lengths per string (typical using 12 AWG)WhiteRGB1mcenters0.5mcenters0.25mcenters1mcenters0.5mcenters0.25mcentersmax bulb number 76 101 137 55 75 100total length [m] 83 58 42 62 45 32.75max bulb number 70 91 113 50 70 95total length [m] 84 60 43 64 49.5 38.5max bulb number 62 71 81 45 58 65total length [m] 91 65 50 74 58.5 46max bulb number 50 57 61 38 45 50total length [m] 94 73 74 82 67 57.25max bulb number 35 45 56total length [m] 84 72 63.75max bulb number 42 44 49 35 40 49total length [m] 101 81.5 72 94 79.5 72String Cable SpecificationsConductorsJacketDimensionsListing2 x 12 AWG 65/30 bareannealed copperBlack; UV resistant andflame retardant PVC.375” x .210” (9.5mm x5.3mm)UL Listed type CL3Xfor outdoor and burialapplications. Rated 105deg C.LITIMSLEDA4-011013

System DiagramThis is a typical architectural system of 2 Universes of DMX with 340 RGB IMS Lamps and 2 IMS Universe Drives ** Max. total bulbs per Universe Drive is 170 depending on spacing and distance. Multiple strings may be used (not to exceed 170 bulbs per Drive).LITIMSSYSDIAGA4-012413

The Future of Lighting Control – Is Here Now!CRMX Nova represents the future of DMX & RDM distribution. CRMX stands for Cognitive Radio Multiplexer. It is the firstautomated and adaptive wireless technology specifically developed for the lighting industry. LumenRadio’s Nova products offer thisinnovation in rugged enclosures designed to meet the particular requirements of the entertainment and architectural markets.Key CRMX Nova innovations and advantages are:• Automated Cognitive Coexistence. CRMX wirelesstransmissions never disturb, or are disturbed by, other wirelessequipment. This fully automated feature offers unrivaled convenienceand peace of mind during operation.• Fidelity. The DMX frame output is identical to the frame input.• Error correction. Advanced algorithms recreate corrupt or lostradio packets.• Compliance. Non-compliant DMX is corrected to meet theDMX512-A standard.• Synchronization. Precision timing mechanism guaranteessynchronized frame delivery.• Latency. Industry best; 5ms even in multi-universe systems.• CRMX SuperNova - Free RDM controller and RDM Proxy 1 .Includes what you need to manage and monitor RDM systems.• Ethernet support 1 . Art-Net I & II, ETCNet 2 & 3, StrandShowNet, Streaming ACN (draft & final), Color Kinetics KiNet,and Pathport protocols are supported. CRMX Nova Flex also outputEthernet protocols.• Ease of use. One button takes care of all setup.• Ease of mounting. Multiple mounting options facilitate easyrigging or rack mounting.• Security. 128 bit encryption ensures no hacker interference.• Legacy support. Nova receivers are compatible with legacyW-DMX systems.• Upgradeable. Software and firmware readily available from ourdistributors or our website.• Support. 24/7 support from dedicated experts.The Flex(ible) Revolution – CRMX Nova FXCRMX Nova FX offer unparallelled flexibility:• Input any protocol - output any protocol. Transmit anyprotocol and receive any protocol. Transmit and output Art-Net.Transmit Streaming ACN and output ETCNet. You choose.• Configurable as transmitter or receiver. You can reconfigure a unitto any function you want, using SuperNova.The RDM evolution – CRMX TX2 RDM & RX RDMCRMX TX2 & RX RDM offer bi-directional RDM communicationwith SuperNova RDM controller. Remote configure, set DMXaddresses, monitor sensors, set warning levels, receive alarms from allRDM enabled units and much more with CRMX SuperNova. Ethernetprotocols are included in the TX2 units, which is converted to DMX.The ultimate DMX reliability – CRMX TX2, TX & RXCRMX TX2, TX & RX offer robust and reliable wireless DMXdistribution. Ethernet protocols are included in the TX2 units, which isconveted to DMX.Automated Cognitive Coexistence explained:Wireless DMX distribution systems operate on the samelicense free frequencies as W-LAN, ZigBee, Bluetooth,some wireless intercoms, etc. Interference between suchsystems has been a growing problem in the industrywith no available solution. CRMX is the first system tocontinuously scan the radio spectrum and dynamicallyadapt its frequency hopping patterns. This eliminatesinterference and maximizes performance of all radiosystems in the same radio frequency sphere. In short, it’sa smart radio that adapts.Fidelity, Error Correction and Synchronizationexplained:DMX/RDM fidelity and error correction ensures thatDMX/RDM frames retain the exact same content andproperties, including timing parameters, throughoutthe transmission process. Synchronization guaranteesthat the DMX frames are delivered by all receivers atexactly the same time regardless of their location and thepresence of other radio systems.RDM Controller explained:RDM, officially known as “ANSI/ESTA E1.20,Entertainment Technology - Remote DeviceManagement over USITT DMX512” is a bi-directionalextension of DMX that allows control and monitoringof RDM devices from an RDM Controller. CRMXRDM products ship with LumenRadio’s RDMController CRMX SuperNova, that allows easy setup,management, and monitoring of even the most complexRDM enabled system.CRMX, CRMX Nova, CRMX Outdoor and CRMX SuperNova are trademarks of LumenRadio. W-DMX is a trademark of Wireless Solution Sweden. CRMX is patent pending, CE and FCC approved.

CRMX Nova specificationswww.lumenradio.com/specsCRMX Nova FX RDM(Flex reconfigurable)CRMX Nova TX2 RDM(RDM transmitter)CRMX Nova RX RDM(RDM receiver)CRMX Nova TX2(DMX transmitter)CRMX Nova TX(DMX transmitter)CRMX Nova RX(DMX receiver)Model code (Order code) IN-RFX1 (800-3001) IN-RTX2 (800-2101) IN-RRX1 (800-2001) IN-DTX2 (800-1102) IN-DTX1 (800-1101) IN-DRX1 (800-1001)Supported protocolsUSITT DMX-512 (1986 & 1990) and DMX 512A Yes Yes Yes Yes Yes YesArt-Net I, II & 3, ETCNet 2 & 3, Strand ShowNet, Streaming ACN, Yes, input any protocol Yes, input any protocol No Yes, input any protocol No NoPathport, KiNet 1 & 2and output any protocolRDM ANSI E1.20 Yes Yes Yes No No NoWorks with CRMX SuperNova RDM Controller Yes Yes Yes Yes, configuration only No NoFirmware upgrade Ethernet Ethernet XLR Ethernet XLR XLRDMX interfaceNumber of universes supported 1 2 1 2 1 1Full DMX fidelity and frame integrity Yes Yes Yes Yes Yes YesError correction and packet recovery Yes Yes Yes Yes Yes YesFrame synchronization Less than 0.01 ms Less than 0.01 ms Less than 0.01 ms Less than 0.01 ms Less than 0.01 ms Less than 0.01 msEnd-to-end DMX latency Less than 5 ms Less than 5 ms Less than 5 ms Less than 5 ms Less than 5 ms Less than 5 msAuto sensing of DMX frame rate and size Yes Yes Yes Yes Yes YesSupported DMX frame rates0.8 – 7352 Hz Transmitter 0.8 – 7352 Hz 1 – 830 Hz 1 0.8 – 7352 Hz 0.8 – 7352 Hz 1 – 830 Hz 1mode / 1 – 830 Hz 1Receiver modeNumber of DMX channels supported 0 – 512 0 – 1024 0 – 512 0 – 1024 0 – 512 0 – 512Loss of DMX input behaviorDMX output will go intohigh impedance stateTimeout after 1.25s DMX driver will go intohigh impedance stateTimeout after 1.25s Timeout after 1.25s DMX driver will go intohigh impedance stateESD protected interfaces Yes Yes Yes Yes Yes YesW-DMX G2/G3/G4 Compatibility 2 Yes, in receive mode No Yes No No YesPowerHigh voltage input 85-264VAC / 47-70Hz /0.12A / 10W85-264VAC / 47-70Hz /0.25A / 22W85-264VAC / 47-70Hz /0.12A / 10W85-264VAC / 47-70Hz /0.25A / 22W85-264VAC / 47-70Hz /0.12A / 10W85-264VAC / 47-70Hz /0.12A / 10WLow voltage input 12VDC ±20% / 0.6A/ 7.5W12VDC ±20% / 1A / 12W 12VDC ±20% / 0.2A/ 2.5W12VDC ±20% / 1A / 12W 12VDC ±20% / 0.3A / 4W 12VDC ±20% / 0.2A/ 2.5WPower over Ethernet Yes Yes No Yes No NoTransient protected power inputs Yes Yes Yes Yes Yes YesRF characteristicsModes of operation Transmitter, Receiver Transmitter Receiver Transmitter Transmitter ReceiverAutomated Cognitive Coexistence Yes Yes Yes Yes Yes YesDynamic adaptive frequency hopping Yes Yes Yes Yes Yes YesRecoverable Radio Packet Error Rate 30% 30% 30% 30% 30% 30%Operational frequency range 2402-2480MHz 2402-2480MHz 2402-2480MHz 2402-2480MHz 2402-2480MHz 2402-2480MHzRF output in high power mode 300mW (25dBm) 3 300mW (25dBm) 3 300mW (25dBm) 3 300mW (25dBm) 3 300mW (25dBm) 3 N/ARF output in normal power mode 100mW (20dBm) 100mW (20dBm) 100mW (20dBm) 100mW (20dBm) 100mW (20dBm) N/ARF output in low power mode35mW (15dBm) or35mW (15dBm) or35mW (15dBm) or35mW (15dBm) or35mW (15dBm) orN/A10mW (10dBm)10mW (10dBm)10mW (10dBm)10mW (10dBm)10mW (10dBm)RF modulation GFSK GFSK GFSK GFSK GFSK GFSKSensitivity at 0.1% Packet Error Rate -96dBm -96dBm -96dBm -96dBm -96dBm -96dBmTested link range (Normal power mode usingUp to 1000m Up to 1000m Up to 1000m Up to 1000m Up to 1000m Up to 1000mstandard antennas in free line-of-sight)Recovery time upon loss of signal Less than 1s N/A Less than 1s N/A N/A Less than 1sApprovalsFCC: 15.247&68 Class B; Canada ICES 003 CE; EN 301 489-1; EN301 489-3; EN 300 328; SS-EN 61547:2009; EN 60 950; SRRC -China; ARIB STD-T66 - JapanYes Yes Yes Yes Yes YesWireless done right!EnvironmentOperating temperature range (ambient)-20°C to +50°C-4°F to 122°F-20°C to +50°C-4°F to 122°F-20°C to +50°C-4°F to 122°F-20°C to +50°C-4°F to 122°F-20°C to +50°C-4°F to 122°F-20°C to +50°C-4°F to 122°FHumidity 0-90% non-condensing 0-90% non-condensing 0-90% non-condensing 0-90% non-condensing 0-90% non-condensing 0-90% non-condensingPhysicalEnclosureDimensions ( W x H x D) excluding antennaAnodized extrudedaluminum110 x 44 x 160 mm4.3” x 1.7” x 6.3”Anodized extrudedaluminum220 x 44 x 125 mm8.6” x 1.7” x 4.9”Anodized extrudedaluminum110 x 44 x 160 mm4.3” x 1.7” x 6.3”Anodized extrudedaluminum220 x 44 x 125 mm8.6” x 1.7” x 4.9”Anodized extrudedaluminum110 x 44 x 160 mm4.3” x 1.7” x 6.3”Anodized extrudedaluminum110 x 44 x 160 mm4.3” x 1.7” x 6.3”Weight 0.8kg, 1.8lb 0.9kg, 2.0lb 0.7kg, 1.5lb 0.9kg, 2.0lb 0.7kg, 1.5lb 0.7kg, 1.5lbwww.lumenradio.comConnectorsAntenna connector RP-TNC male RP-TNC male RP-TNC male RP-TNC male RP-TNC male RP-TNC maleDMX connectors 1 XLR 5-pin female 2 XLR 5-pin male 1 XLR 5-pin female 2 XLR 5-pin male 1 XLR 5-pin male 1 XLR 5-pin femaleEthernet connectors 1 RJ45 1 Neutrik® EtherconRJ45DC inputPluggable terminal strip,Phoenix® MSTB 2.5Pluggable terminal strip,Phoenix® MSTB 2.5Pluggable terminal strip,Phoenix® MSTB 2.51 Neutrik® EtherconRJ45Pluggable terminal strip,Phoenix® MSTB 2.5Pluggable terminal strip,Phoenix® MSTB 2.5Pluggable terminal strip,Phoenix® MSTB 2.5AC input IEC 320-C14 Male IEC 320-C14 Male IEC 320-C14 Male IEC 320-C14 Male IEC 320-C14 Male IEC 320-C14 MaleSupplied accessoriesAC power cord, DCpower connector, 2dBiRP-TNC antennaAC power cord, DCpower connector, 2dBiRP-TNC antennasAC power cord, DCpower connector, 2dBiRP-TNC antennaAC power cord, DCpower connector, 2dBiRP-TNC antennasAC power cord, DCpower connector, 2dBiRP-TNC antennaAC power cord, DCpower connector, 2dBiRP-TNC antenna38SRRCARIB STD-T661 2Limited by the DMX512-A standard Compatible with W-DMX transmitters on the 2.4 GHz band3Allowed in North America onlyLITCRMXNOVAA4-082112

CRMX available as OEMCRMX represents the future of DMX & RDM distribution. CRMX stands for Cognitive Radio Multiplexer.It is the firstautomated and adaptive wireless technology specifically tailored for the lighting industry. CRMX is available onan OEM basis for manufacturers to integrate into fixtures, controllers, and any other DMX/RDM enabled device.Fixtures and controllers with CRMX OEM integrated will be fully compatible with other CRMX DMX/RDM productssuch as CRMX Nova and CRMX Outdoor . LumenRadio can also assist manufacturers in RDM-enabling any DMXdevices through the integration of CRMX OEM modules.Key CRMX innovations and advantages are:• Automated Cognitive Coexistence - CRMX wireless transmissions never disturb, or aredisturbed by, other wireless equipment. This fully automated feature offers unrivaledconvenience and peace of mind during operation.• Fidelity - The DMX frame output is identical to the frame input.• Error correction - Advanced algorithms recreate corrupt or Lost radio packets.• Compliance - Non-compliant DMX is corrected to meet the DMX512-A standard.• Synchronization - Precision timing mechanism guarantees synchronized frame delivery.• Latency - Industry best; below 5ms in multi-universe systems.• Compatible with CRMX SuperNova - All that is needed to manage and monitor RDMsystems.• Security - 128 bit encryption ensures no hacker interference.• Legacy support - CRMX receivers are compatible with legacy W -DMX systems.• Upgradeable - Software and firmware readily available from www.tmb.com/lumenradioor the LumenRadio website.CRMX OEM comes in five differentmodels:• OEM RX RDM• OEM FX DMX• OEM RX DMX• OEM TX DMX• CRMX DMX Receiver W-DMX footprintCognitivedual bandRDMDMXLITCRMXNOVA-082112Color coded PCBs provide easyidentification of OEM product linesAutomated Cognitive Coexistence explained:Wireless DMX distribution systems operate on the samelicense free frequencies as W-LAN, ZigBee, Bluetooth,some wireless intercoms, etc. Interference between suchsystems has been a growing problem in the industrywith no available solution. CRMX is the first system tocontinuously scan the radio spectrum and dynamicallyadapt its frequency hopping patterns. This eliminatesinterference and maximizes performance of all radiosystems in the same radio frequency sphere. In short, it’sa smart radio that adapts.Fidelity, Error Correction and Synchronizationexplained:DMX/RDM fidelity and error correction ensures thatDMX/RDM frames retain the exact same content andproperties, including timing parameters, throughoutthe transmission process. Synchronization guaranteesthat the DMX frames are delivered by all receivers atexactly the same time regardless of their location and thepresence of other radio systems.RDM Controller explained:RDM, officially known as “ANSI/ESTA E1.20,Entertainment Technology - Remote DeviceManagement over USITT DMX512” is a bi-directionalextension of DMX that allows control and monitoringof RDM devices from an RDM Controller. CRMXRDM products ship with LumenRadio’s RDMController CRMX SuperNova, that allows easy setup,management, and monitoring of even the most complexRDM enabled system.CRMX, CRMX Nova, CRMX Outdoor and CRMX SuperNova are trademarks of LumenRadio. W-DMX is a trademark of Wireless Solution Sweden. CRMX is patent pending, CE and FCC approved.

CRMX OEM specificationswww.lumenradio.com/specsCRMX OEM RX RDM CRMX OEM FX DMX CRMX OEM RX DMX CRMX OEM TX DMX CRMX DMX ReceiverW-DMX footprintModel code (Order code) OE-BRX1 (800-8005) OE-GFX1 (800-8006) OE-GRX1 (800-8001) OE-GTX1 (800-8002) OE-WDFP (800-8901)Supported protocolsUSITT DMX-512 (1986 & 1990) and DMX 512-A Yes Yes Yes Yes YesRDM ANSI E1.20 Yes No No No NoFirmware upgrade Multiple options Multiple options Multiple options Multiple Options Multiple optionsDMX interfaceNumber of universes supported 1 1 1 1 1Full DMX fidelity and frame integrity Yes Yes Yes Yes YesError correction and packet recovery Yes Yes Yes Yes YesFrame synchronization Less than 0.01 ms Less than 0.01 ms Less than 0.01 ms Less than 0.01 ms Less than 0.01 msEnd-to-end DMX latency Less than 5 ms Less than 5 ms Less than 5 ms Less than 5 ms Less than 5 msAuto sensing of DMX frame rate and frame size Yes Yes Yes Yes YesSupported DMX frame rates 1 - 830 Hz 1 1 - 830 Hz 1 /1 - 830 Hz 1 0.8 - 7352 Hz 1 - 830 Hz 10.8 - 7352 HzNumber of DMX channels supported 0 – 512 0 – 512 0 – 512 0 – 512 0 – 512Loss of DMX input behaviorDMX driver output will gointo high impedance stateDMX driver output will gointo high impedance stateTimeout after 1.25 sDMX driver output willgo into high impedancestate in receiving mode.Timeout after 1.25s intransmitting modeW-DMX G2/G3/G4 Compatibility 2 Yes Yes, in receive mode Yes No YesDMX driver output will gointo high impedance statePowerLow voltage input5VDC regulated or7-12VDC / 100mA max5VDC regulated or7-12VDC / 300mA max5VDC regulated or7-12VDC / 100mA max5VDC regulated or7-12VDC / 300mA max5VDC regulated or7-12VDC / 100mA maxRF characteristicsModes of operation Receiver Transmitter, Receiver Receiver Transmitter ReceiverAutomated Cognitive Coexistence Yes Yes Yes Yes YesDynamic adaptive frequency hopping Yes Yes Yes Yes YesRecoverable Radio Packet Error Rate 30% 30% 30% 30% 30%Operational frequency range 2402-2480MHz 2402-2480MHz 2402-2480MHz 2402-2480MHz 2402-2480MHzRF output in high power mode 300mW (25dBm) 3 300mW (25dBm) 3 N/A 300mW (25dBm) 3 N/ARF output in normal power mode 100mW (20dBm) 100mW (20dBm) N/A 100mW (20dBm) N/ARF output in low power mode35mW (15dBm) or35mW (15dBm) orN/A35mW (15dBm) orN/A10mW (10dBm)10mW (10dBm)10mW (10dBm)RF modulation GFSK GFSK GFSK GFSK GFSKSensitivity at 0.1% Packet Error Rate -96dBm -96dBm -96dBm -96dBm -96dBmLink range (Normal power mode using standardUp to 1000m Up to 1000m Up to 1000m Up to 1000m Up to 1000mantennas in urban area)Recovery time upon loss of signal Less than 1s Less than 1s Less than 1s N/A Less than 1sApprovalsFCC: 15.247&68 Class B; Canada ICES 003 CE; EN 301489-1; EN 301 489-3; EN 300 328; SS-EN 61547:2009; EN60 950; SRRC - China; ARIB STD-T66 - JapanYes Yes Yes Yes YesEnvironmentOperating temperature range (ambient)-20°C to +70°C-4°F to 158°F-20°C to +70°C-4°F to 158°F-20°C to +70°C-4°F to 158°F-20°C to +70°C-4°F to 158°F-20°C to +70°C-4°F to 158°FHumidity 0-90% non-condensing 0-90% non-condensing 0-90% non-condensing 0-90% non-condensing 0-90% non-condensingPhysicalDimensions ( W x H x D) excluding antenna27.5 x 12 x 65 mm1.1” x 0.47” x 2.6”27.5 x 12 x 65 mm1.1” x 0.47” x 2.6”27.5 x 12 x 65 mm1.1” x 0.47” x 2.6”27.5 x 12 x 65 mm1.1” x 0.47” x 2.6”46 x 12 x 82 mm1.8” x 0.47” x 3.2”Weight 10g, 0.02lb 10g, 0.02lb 10g, 0.02lb 10g, 0.02lb 10g, 0.02lbConnectorsAntenna connector MCX MCX MCX MCX MCXIntegral antenna option Yes Yes Yes Yes YesDC and data connectorStandard 2.54 x 2.54mm(0.1 x 0.1”) 2 x 10 positionheaderStandard 2.54 x 2.54mm(0.1 x 0.1”) 2 x 10 positionheaderStandard 2.54 x 2.54mm(0.1 x 0.1”) 2 x 10 positionheaderStandard 2.54 x 2.54mm(0.1 x 0.1”) 2 x 10 positionheaderStandard 2.54 x 2.54mm(0.1 x 0.1”) 2 x 5 positionheader1Limited by the DMX512-A Standard2Compatible with W-DMX transmitters on the 2.4 GHz band3Allowed in North America onlySRRCARIB STD-T6641LITCRMXOEMA4-082112

CRMX available as OEMCRMX represents the future of DMX & RDM distribution. CRMX stands for Cognitive Radio Multiplexer.It is the firstautomated and adaptive wireless technology specifically tailored for the lighting industry. CRMX is available onan OEM basis for manufacturers to integrate into fixtures, controllers, and any other DMX/RDM enabled device.Fixtures and controllers with CRMX OEM integrated will be fully compatible with other CRMX DMX/RDM productssuch as CRMX Nova and CRMX Outdoor . LumenRadio can also assist manufacturers in RDM-enabling any DMXdevices through the integration of CRMX OEM modules.Key CRMX innovations and advantages are:• Automated Cognitive Coexistence - CRMX wireless transmissions never disturb, or aredisturbed by, other wireless equipment. This fully automated feature offers unrivaledconvenience and peace of mind during operation.• Fidelity - The DMX frame output is identical to the frame input.• Error correction - Advanced algorithms recreate corrupt or Lost radio packets.• Compliance - Non-compliant DMX is corrected to meet the DMX512-A standard.• Synchronization - Precision timing mechanism guarantees synchronized frame delivery.• Latency - Industry best; below 5ms in multi-universe systems.• Compatible with CRMX SuperNova - All that is needed to manage and monitor RDMsystems.• Security - 128 bit encryption ensures no hacker interference.• Legacy support - CRMX receivers are compatible with legacy W -DMX systems.• Upgradeable - Software and firmware readily available from www.tmb.com/lumenradioor the LumenRadio website.CRMX OEM comes in five differentmodels:• OEM RX RDM• OEM FX DMX• OEM RX DMX• OEM TX DMX• CRMX DMX Receiver W-DMX footprintCognitivedual bandRDMDMXLITCRMXNOVA-082112Color coded PCBs provide easyidentification of OEM product linesAutomated Cognitive Coexistence explained:Wireless DMX distribution systems operate on the samelicense free frequencies as W-LAN, ZigBee, Bluetooth,some wireless intercoms, etc. Interference between suchsystems has been a growing problem in the industrywith no available solution. CRMX is the first system tocontinuously scan the radio spectrum and dynamicallyadapt its frequency hopping patterns. This eliminatesinterference and maximizes performance of all radiosystems in the same radio frequency sphere. In short, it’sa smart radio that adapts.Fidelity, Error Correction and Synchronizationexplained:DMX/RDM fidelity and error correction ensures thatDMX/RDM frames retain the exact same content andproperties, including timing parameters, throughoutthe transmission process. Synchronization guaranteesthat the DMX frames are delivered by all receivers atexactly the same time regardless of their location and thepresence of other radio systems.RDM Controller explained:RDM, officially known as “ANSI/ESTA E1.20,Entertainment Technology - Remote DeviceManagement over USITT DMX512” is a bi-directionalextension of DMX that allows control and monitoringof RDM devices from an RDM Controller. CRMXRDM products ship with LumenRadio’s RDMController CRMX SuperNova, that allows easy setup,management, and monitoring of even the most complexRDM enabled system.CRMX, CRMX Nova, CRMX Outdoor and CRMX SuperNova are trademarks of LumenRadio. W-DMX is a trademark of Wireless Solution Sweden. CRMX is patent pending, CE and FCC approved.

CRMX OEM specificationswww.lumenradio.com/specsCRMX OEM RX RDM CRMX OEM FX DMX CRMX OEM RX DMX CRMX OEM TX DMX CRMX DMX ReceiverW-DMX footprintModel code (Order code) OE-BRX1 (800-8005) OE-GFX1 (800-8006) OE-GRX1 (800-8001) OE-GTX1 (800-8002) OE-WDFP (800-8901)Supported protocolsUSITT DMX-512 (1986 & 1990) and DMX 512-A Yes Yes Yes Yes YesRDM ANSI E1.20 Yes No No No NoFirmware upgrade Multiple options Multiple options Multiple options Multiple Options Multiple optionsDMX interfaceNumber of universes supported 1 1 1 1 1Full DMX fidelity and frame integrity Yes Yes Yes Yes YesError correction and packet recovery Yes Yes Yes Yes YesFrame synchronization Less than 0.01 ms Less than 0.01 ms Less than 0.01 ms Less than 0.01 ms Less than 0.01 msEnd-to-end DMX latency Less than 5 ms Less than 5 ms Less than 5 ms Less than 5 ms Less than 5 msAuto sensing of DMX frame rate and frame size Yes Yes Yes Yes YesSupported DMX frame rates 1 - 830 Hz 1 1 - 830 Hz 1 /1 - 830 Hz 1 0.8 - 7352 Hz 1 - 830 Hz 10.8 - 7352 HzNumber of DMX channels supported 0 – 512 0 – 512 0 – 512 0 – 512 0 – 512Loss of DMX input behaviorDMX driver output will gointo high impedance stateDMX driver output will gointo high impedance stateTimeout after 1.25 sDMX driver output willgo into high impedancestate in receiving mode.Timeout after 1.25s intransmitting modeW-DMX G2/G3/G4 Compatibility 2 Yes Yes, in receive mode Yes No YesDMX driver output will gointo high impedance statePowerLow voltage input5VDC regulated or7-12VDC / 100mA max5VDC regulated or7-12VDC / 300mA max5VDC regulated or7-12VDC / 100mA max5VDC regulated or7-12VDC / 300mA max5VDC regulated or7-12VDC / 100mA maxRF characteristicsModes of operation Receiver Transmitter, Receiver Receiver Transmitter ReceiverAutomated Cognitive Coexistence Yes Yes Yes Yes YesDynamic adaptive frequency hopping Yes Yes Yes Yes YesRecoverable Radio Packet Error Rate 30% 30% 30% 30% 30%Operational frequency range 2402-2480MHz 2402-2480MHz 2402-2480MHz 2402-2480MHz 2402-2480MHzRF output in high power mode 300mW (25dBm) 3 300mW (25dBm) 3 N/A 300mW (25dBm) 3 N/ARF output in normal power mode 100mW (20dBm) 100mW (20dBm) N/A 100mW (20dBm) N/ARF output in low power mode35mW (15dBm) or35mW (15dBm) orN/A35mW (15dBm) orN/A10mW (10dBm)10mW (10dBm)10mW (10dBm)RF modulation GFSK GFSK GFSK GFSK GFSKSensitivity at 0.1% Packet Error Rate -96dBm -96dBm -96dBm -96dBm -96dBmLink range (Normal power mode using standardUp to 1000m Up to 1000m Up to 1000m Up to 1000m Up to 1000mantennas in urban area)Recovery time upon loss of signal Less than 1s Less than 1s Less than 1s N/A Less than 1sApprovalsFCC: 15.247&68 Class B; Canada ICES 003 CE; EN 301489-1; EN 301 489-3; EN 300 328; SS-EN 61547:2009; EN60 950; SRRC - China; ARIB STD-T66 - JapanYes Yes Yes Yes YesEnvironmentOperating temperature range (ambient)-20°C to +70°C-4°F to 158°F-20°C to +70°C-4°F to 158°F-20°C to +70°C-4°F to 158°F-20°C to +70°C-4°F to 158°F-20°C to +70°C-4°F to 158°FHumidity 0-90% non-condensing 0-90% non-condensing 0-90% non-condensing 0-90% non-condensing 0-90% non-condensingPhysicalDimensions ( W x H x D) excluding antenna27.5 x 12 x 65 mm1.1” x 0.47” x 2.6”27.5 x 12 x 65 mm1.1” x 0.47” x 2.6”27.5 x 12 x 65 mm1.1” x 0.47” x 2.6”27.5 x 12 x 65 mm1.1” x 0.47” x 2.6”46 x 12 x 82 mm1.8” x 0.47” x 3.2”Weight 10g, 0.02lb 10g, 0.02lb 10g, 0.02lb 10g, 0.02lb 10g, 0.02lbConnectorsAntenna connector MCX MCX MCX MCX MCXIntegral antenna option Yes Yes Yes Yes YesDC and data connectorStandard 2.54 x 2.54mm(0.1 x 0.1”) 2 x 10 positionheaderStandard 2.54 x 2.54mm(0.1 x 0.1”) 2 x 10 positionheaderStandard 2.54 x 2.54mm(0.1 x 0.1”) 2 x 10 positionheaderStandard 2.54 x 2.54mm(0.1 x 0.1”) 2 x 10 positionheaderStandard 2.54 x 2.54mm(0.1 x 0.1”) 2 x 5 positionheader1Limited by the DMX512-A Standard2Compatible with W-DMX transmitters on the 2.4 GHz band3Allowed in North America onlySRRCARIB STD-T6641LITCRMXOEMA4-082112

CRMX SuperNova – Management Software and RDM/DMX/DALI/Ethernet ControllerCRMX SuperNova is an RDM/DMX/DALI/Ethernet Controller that comes free of charge withLumenRadio’s CRMX Nova and CRMX Outdoor RDM products.Key innovations and advantages with CRMX SuperNova are:• Discovery - All connected RDM devices, wired or wireless, automatically report whatkind of equipment they are and what features they have.• Geographical view - Visualize your entire system setup and display signal strength forall RF devices.• Coexistence view - Monitor the radio spectrum in real time and identify your own andexternal traffic. Manage the spectrum with easy on-screen tools.• DMX map - Drag-and-drop GUI facilities easy DMX addressing for your entire RDMsystem.• Feedback - Get error messages, warnings, operational status, temperatures, fan speed,signal strength and more from all RDM enabled devices. Feedback is saved in a SQLdatabase and can be viewed in SuperNova. Logs and warnings can be e-mailed to youor sent to your smart phone.• Configuration - Link transmitters and receivers together at your convenience. Adjustoutput power of transmitters. Set Art-Net, Streaming ACN and other Ethernet protocolswithin the same user interface.• DMX/DALI/Ethernet Controller - CRMX SuperNova has a built-in controller capable ofgenerating DMX/DALI/Ethernet for test and setup.• Upgradeable - You can always download the latest versions of CRMX SuperNova fromwww.tmb.com/lumenradio or www.crmxnova.com.CRMX SuperNova is an RDM/DMX Controller thatcomes free of charge with LumenRadio’s RDMproducts.CRMX SuperNova is platform independent and canbe used on Windows, Mac OS X and GNU/Linuxsystems. Any Java enabled lighting console, laptopor Tablet PC can run SuperNova.Geographical view:Visualize your system, configure and monitor devices.

CRMX SuperNovaCoexistence view with cognitive dual band:View the entire wireless spectrum in real-time for both 2.4 GHz and 5.8 GHz bands. Your traffic is shown in green andother traffic is shown in orange.DMX Map:Use drag-and-drop to set DMX addresses for your RDM system.CRMX, CRMX Nova, CRMX Outdoor and CRMX SuperNova are trademarks of LumenRadio. CRMX is patent pending, CE and FCC approved.SuperNova is free of charge software that requires a customer provided computer and a CRMX RDM Transmitter for full functionality.LITSUPERNOVAA4-032612

Super-NovaExtremely brightAerial Effect light• Voltage: 230V 50 or 60 Hz (on request) or 50/60 Hz switchable version• Power Consumption: 2000W Cosφ ≥ 0.9• Weight: 147.5 lb. [67Kg]• Control Protocol: DMX 512• Total DMX channels required: 15 (18 for extended personality)• Stand-alone programmable via display in the base• 8/16 Bits Pan/Tilt Resolution• Max. Pan Angle: 540°• Max. Tilt Angle: 260°• Pan Speed: 540° in 3.2 Sec.• Tilt Speed: 260° in 2.9 Sec.• IP Rating: 43 (Weatherproof)• Type of Lamp: Osram HTI 1200W/D7/60• Average Lamp Life: 750 H• Lamp Luminous Flux: 200,000 Lumens• 5 individual lighting effects• Colours: 6 + White and CMY color mixing• Shutter + Dimmer + Strobe• Control and storage of angular position of each reflector• CW-CCW adjustable reflector rotation speed + stop• Beam aperture of each reflector: 38UK Exclusive DistributionLITNOVALIGHTA4-031213

North America and EU Exclusive Distribution by:

PRS Load Monitoring SystemPerformance Rigging Systems is committed to providing the entertainment industry with thesafest rigging products in the World through state of the art technology. Through the use ofleading edge technology, we are able to provide the entertainment industry the informationthey require, in real time, in order to make informed decisions in overhead lifting, thuskeeping crews, performers, and audience members safe. In the process, we have alsointegrated safety elements to protect the equipment being used which reduces costly repairsand down time. The PRS Load Monitoring System has been in development for the past sevenyears and with its successful release at InfoComm 2012, it is becoming known as the bestchoice in load monitoring.PER5/8LC3.25T - 5/8” 3.25-ton load cellPER3/4LC4.75T - 3/4” 4.75-ton load cell• Accurate to within 0.5% FSO (Full Scale Output)• Zero head room loss shackle load cell using a Crosby safety anchor shackle and anadvanced IP-67 rated load pin constructed entirely of stainless steel to ensure the rigors oftouring and outdoor festivals.• Provides the production crew, in real time, the actual load being carried by each individualhoist preventing accidental over load.• Wireless data transmission provided by Bluetooth technology navigates the 2.4GHzspectrum over 79 channels up to 300ft (100M)• Wired data transmission provided by Ethernet, simply connect your laptop to a repeater boxand instantly monitor loads. Add a ProPlex GBS to network the PRS load monitoring systemand take your load monitoring to a whole new level of unlimited monitoring.• The PC software provides a graphical display of each repeater box, records and displaysactual and peak load readings, alerts the user of over load and under load (both visual andauditable), engages the E-Stop to qualified hoist controllers, and allows users to export theload data into an excel spreadsheet for the show log book.• Networking your PRS load monitoring system via Ethernet provides the user withunprecedented monitoring features and limitless number of active load cells.PERREPEATERBOX - Repeater BoxSafety is of vital importance to everyone involved in the entertainment industry. The missionof Performance Rigging Systems is to provide a range of equipment that will be robust, highlyaccurate, versatile and efficient, while exceeding even the most stringent modern safetystandards. Our equipment will help provide the information to make more informed decisions.Performance Rigging Systems is your partner in Safety.

Bluetooth SetupEthernet Setup

Summary of FeaturesLoad Cell System ComparisonMaximum Number MonitorPRS Elion Kinesys Motion Lab Broadweigh< 50 50-100 unlimitedTransmissionWiFi 2.4 GHz WiFi 5.0 GHzWired Radio Frequency BluetoothData Connection4-pin XLR5-pin XLR6-pin XLR7-pin TajimiPower SupplyBattery Universal Power USBSafety Rating5 to 1 7 to 110 to 1 Head Room LossNo Loss< 4” > 6” Outdoor RatingIP-65 IP-67Accuracy (FSO*)2% 1% 0.50% *FSO: Full Scale OutputLITPRSA4-090413

A high intensity discharge lamp in a modified ETC SourceFour PAR body. Extremely bright, daylight output in aconvenient, attractive package. The output of an HMI fixturewith the field quality and versatility of the Source Four PAR.Source Four PAR is a registered trademark of Electronic Theatre Controls.

SPECIFICATIONSLight SourceColor TemperatureOptical SystemCoolingBallast TypeOperating VoltagePower FactorPowerPAR 575 Auto Re-strikeTECHNICAL575W single ended metal halide source with GX9,5 base and LCL=65mm. Applicable lamps includeMSR575/2, HSR575/2, MSD575 and HSD575.7200° K with MSR575/2 or HSR575/2.6000° K with MSD575 or HSD575.Parabolic reflector with a faceted surface in combination with interchangeable beam shaping lenses.Convection cooled lamphouse, fan cooled ballast.Electronic switch-mode power supply.Autosensing 90-265V AC, 47-65 Hz0.99 - Auto CorrectingPower Consumption 690 VA (3A @ 230V)Max. Surface Temp.Max. Ambient Temp.IP RatingMountingOperating AngleFinishAccessories170° C35° CIP20Standard 12.5 mm hole on top of yoke for clamp mountingUnrestrictedMatte black finish standard. Custom finishes are available for a reasonable surcharge and lead time.PowerPAR 575 is supplied with a set of four lenses, a colour frame, and a 4-leaf rotatable barndoor.Additional accessories are available including top-hats, half-hats, eggcrate louvres and various mountinghardware.PHOTOMETRICLensTypeVNSP(clear)NSP(stipple)Angle Intensity Multiplier 10’ 20’ 30’ 40’ 50’ 60’Foot Beam Foot Beam Foot Beam Foot Beam Foot Beam FootBeamBeamCand. Dia. Cand. Dia. Cand. Dia. Cand. Dia. Cand. Dia. Cand.CandelaFieldFieldFieldFieldFieldField Field LuxLuxLuxLuxLuxLuxDia.Dia.Dia.Dia.Dia.11°0.2 7520 2 1880 4 836 6 470 8 301 10 209 1275200020° 0.36 80945 3.6 20236 7.2 8994 10.8 5059 14.4 3238 18 2248 21.613°0.23 6160 2.3 1540 4.6 684 6.9 385 9.2 246 11.5 171 13.861600023° 0.41 66306 4.1 16576 8.2 7367 12.3 4144 16.4 2652 20.5 1842 24.6BeamDia.FieldDia.MFL(8-row)15° x 20°0.31 x 0.37 356035600023° x 30° 0.41 x 0.56 383203.1 x3.74.1 x5.689095806.2 x7.48.2 x11.239642589.3 x11.112.3 x16.8223239512.4 x14.816.4 x22.4142153315.5 x18.520.5 x2899106418.6 x22.224.6 x33.6WFL(12-row)18° x 28°0.32 x 0.52 152015200035° x 45° 0.62 x 0.84 163613.2 x5.26.2 x8.438040906.4 x10.412.4 x16.816918189.6 x15.618.6 x25.295102312.8 x20.824.8 x33.66165416 x2631 x424245419.2 x31.237.2 x50.4To calculate intensity in footcandles at any given distance, divide the candela number by the throw squared.To calculate beam or field diameter, multiply the “Beam” or “Field” multiplier by the throw.LITPWPR575A4-051612

SAFETY• Make sure that no mains cables rest in contact with fixture body.• Yoke of fixture may be mounted to a lighting bar, hook clamp, TV spud, or any non-flammable surface using an M10 bolt.• The mounting bolt and hand nut may be used to adjust and maintain fixture position. Tighten firmly when position is correct.• Replace lamp if cracked or thermally deformed.• Replace mesh screen if damaged or missing.• Make sure that lamp can spin freely after fitting the retaining ring.• Fixture is not rated for and must not be used in environments containing flammable or explosive materials.• A safety cable must always be used to secure fixture to supporting framework.• When barn doors are used, a safety cable must always be looped from the barn door frame to the fixture.• When connecting to mains power supply, make sure that the fixture is properly earthed and that the supply is at the rated voltage for the lampand observe the correct polarity.• Maximum rated ambient temperature is 45° C.• Maximum rated voltage is 250 volts.• Nominal frequency is 50/60 Hertz.COMMON LAMP TYPESLAMP REPLACEMENT• Disconnect fixture from power supply and allow to cool.• Lift cap retainer and remove cap.• Disconnect lampholder or wires from lamp.• Remove lamp retaining ring by squeezing bent ends together and lifting ring away.• Remove old lamp and replace with new lamp.• Refit lamp retaining ring below dimples, making sure lamp can rotate freely.• Reconnect lampholder or wires.• Refit cap making sure that wires and lamp adjuster allow free movement of lamp.• Connect to power and re-focus as necessary.WARNING - Disconnect from power before re-lamping.CAUTION - Lamp may be very hot.Lamp Type Voltage Wattage Fuse SizeCP60 / 61 / 62 230V 1000W 5 AmpCP86 / 87 / 88 230V 500W 3 AmpFFN / FFP / FFR / FFS 120V 1000W 8 AmpDYS (with Raylite Reflector) 120V 600W 5 Amp500PAR64 120V 500W 4 Amp4552 28V 250W 10 Amp4559 / Q4559 28V 600W 25 AmpLampholder and wiring configuration varies.DIMENSIONS (in millimetres)A B C D E F G H IPAR 64 425 260 470 356 222 241 203 254 78PAR 64 Short 280 260 337 368 235 254 203 254 78PAR 64 Floor Can 280 260 340 369 240 254 203 254 78PAR 56 368 235 400 305 197 216 166 227 65PAR 56 Short 260 230 295 305 191 221 166 227 65PAR 56 Floor Can 266 230 310 320 206 229 166 227 65PAR 36 350 170 370 248 156 141 110 164 N/APAR 36 Short 230 170 258 240 158 146 110 164 N/ALITPRCNCEA4-052212

Linear 4-Lite also availableCOMPACT, LIGHTWEIGHT, POWERFUL, DURABLE!• Powerful output in a compact, lightweight package• Heavy-duty aluminum construction with baked enamel finish• Positive locking yoke• Improved ventilation for extended lamp life• Individually adjustable lamp banks• Fits all major brands of color changers• Stock and custom wiring configurations available

ProCan 8-LitePart No. PR8LITEFor use with PAR 36 lampsProCan 4-LitePart No. PR4LITEFor use with PAR 36 lampsStandard wiring configurations include:• Unwired• Series wiring for DWE 120V lampsStandard wiring configurations include:• Unwired• Series wiring for DWE 120V lamps• Series wiring for 28V ACL lampsConnector configurations include:• Bare pigtails• Pigtails with 15A Duraplug connectors• Pigtails with 16A CEEform connectors• Pigtails with Schuko connectors• Custom configurationsShipping dimensions (HxWxD) 85 x 52 x 14cm [33.5 x 20.5 x 5.5”]Shipping weight 11.5 Kg [25.4 lbs.] unwiredConnector configurations include:• Bare pigtails• Pigtails with 15A Duraplug connectors• Pigtails with 16A CEEform connectors• Pigtails with Schuko connectors• Custom configurationsShipping dimensions (HxWxD) 52 x 52 x 14cm [20.5 x 20.5 x 5.5”]Shipping weight 7.9 Kg [17.4 lbs.] unwiredProCan 20-LitePart No. PR20LITEWFor use with MR16 lampsProCan 2-LitePart No. PR2LITEFor use with PAR 36 lampsStandard wiring configurations include:• Unwired• Series wiring for DWE 120V lampsConnector configurations include:• Bare pigtails• Pigtails with 15A Duraplug connectors• Pigtails with 16A CEEform connectors• Pigtails with Schuko connectors• Custom configurationsShipping dimensions (2 pack)(HxWxD) 52 x 52 x 16cm[20.5 x 20.5 x 6.25”]Shipping weight (2 pack) 6 Kg [13.2 lbs.] unwiredStandard wiring configurations include:• Wired with 1 series circuit of 20 lamps for 240V systems.100 Watt max. lamps.Connector configurations include:• Bare pigtail• Pigtail with 15A Duraplug connector• Pigtail with 16A CEEform connector• Pigtail with Schuko connector• Custom configurationsShipping dimensions (HxWxD) 52 x 52 x 14cm [20.5 x 20.5 x 5.5”]Shipping weight 7.9 Kg [17.4 lbs.] wiredLITBLINDERSA4-030113

DIMENSIONS in millmetresA B C D E F G H IPAR 36 350 170 370 248 154 156 141 110 164PAR 36 Short 230 170 258 240 168 158 146 110 164PAR 30 225 130 250 195 145 125 125 95 127PAR 30 Floor Can 225 130 310 210 155 155 135 95 127PAR 20 159 86 184 140 121 89 95 64 83PAR 20 Short 133 86 152 140 121 89 95 64 83PAR 20 Floor Can 180 86 210 160 130 129 108 64 83PAR 16 146 76 159 114 102 76 79 54 73PAR 16 Short 114 76 127 114 102 76 79 54 73LITPRMINIPARA4-052212

Powerful Variable Speed Professional Fanwith Remote for DMX or Manual ControlProFan is a powerful and versatile fan designed for avariety of professional applications: Studios, Theatres,Theme Parks, Touring, Photographic and more. ProFanis perfect for filling large areas with smoke and haze,creating special wind effects, blowing confetti, snow orbubbles, cooling performers and general ventilation.ProFan: The versatilevortex machine!11” deep-pitch blades maximize thevolume of the air moved with eachrevolution.Special grille design spirals the airstream for greater impact over greaterdistances.• Improved Back Pack remotecontrol with DMX and ManualModes.• Versatile yoke for floor mount,stand mount, or overheadrigging.• 100-240VAC power input.• Powerful, concentrated air flow.• Compact. Rugged. Lightweight.The cylindrical air duct encompassingthe blades creates a narrow, focused“beam” of air.The combination of deep-pitch blades,spiral grille, and focused-air ductcreates a powerful vortex for a varietyof effects.

DIMENSIONSSPECIFICATIONSPowerModesOne-TouchTurbo FunctionAir VolumeWind SpeedDimensionsWeight100-240VAC, 1200W (max)DMX and Manual0-3500RPM within 5 sec.1700CBM/HR0-60KM/HR variable19 x 22 x 18 (in.) / 480 x 560x 460 (mm)27.6 lb. / 12.5 kgBack Pack Controller (detailed below).Can be detached and extended up to 60ft /20m from ProFan with a 3-Pin XLR cable.BACK PACK CONTROLLERXLR 3-pin maleconnector toProFanLCD DisplayDMX512input &outputXLR 5-pinconnectorsInputDMX / ManualMode selectorswitchOutputIn Manual Modethe DMX512output connectortransmits thespeed setting onaddress 1.Manually control a bank ofProFans by setting the first unit toManual Mode and all sebsequentunits to DMX Mode address 1.Slide Fader Control:1. Set DMX address in DMX Mode2. Fan Speed in Manual ModeButton for settingaddress in DMXMode or bumpto full speed inManual ModeLITPROFANA4-101811

ProPlex GBS — GigaBit Ethernet SwitchesPPGBS010R - RackMount 10 port, no fibre, unmanagedPPGBS010RM - RackMount 10 port, no fibre, managedPPGBS109R - RackMount 10 port, single fibre, unmanagedPPGBS109RM - RackMount 10 port, single fibre, managedPPGBS208R - RackMount 10 port, dual fibre, unmanagedPPGBS208RM - RackMount 10 port, dual fibre, managedPPGBS008P - PortableMount8 port, no fibre, unmanagedPPGBS107P - PortableMount8 port, single fibre, unmanagedPPGBS2104P - GBS Mini switch,4 port, single fibre, unmanagedPPGBS208R - 2U RackMount 28 port, dual fibre, unmanagedPPGBS208RM - 2U RackMount 28 port, dual fibre, managedPPGBS028R - 2U RackMount 28 port, no fibre, unmanagedPPGBS028RM - 2U RackMount 28 port, no fibre, managedProPlex Opto-SplittersPPDDS285 - 2x8 RackMount splitter, 2x5-pin IN / 8x5-pin OUTPPDDS283 - 2x8 RackMount splitter, 2x3-pin IN / 8x3-pin OUTPPDDS2853 - 2x8 RackMount splitter, 1x5-pin + 1x3-pin IN / 4x5-pin + 4x3-pin OUTPPDDS285RR -2x8 RackMount RDM splitter, 2x5-pin IN / 8x5-pin OUTPPDDS145MD - Opto-Splitter MiniDMX-only, 1x5-pin IN / 5x5-pinOUTPPDDS145MR - Opto-Splitter MiniRDM, 1x5-pin IN / 1x5-pin THRU /4x5-pin OUTPPDDS155PRW - Opto-SplitterMini RDM Wireless, 1x5-pin IN /1x5-pin THRU / 4x5-pin OUTPPDDS2105RR - 2x10 RackMount RDM splitter, 2x5-pin IN /2x5-pin THRU /10x5-pin OUT© TMB 2012 All Rights Reserved - LITPPXDEVOVA4-101312

ProPlex IQ — Ethernet-DMX ConvertersPPIQA815RD - IQ One 8, 8-way RackMount DMX-Ethernet converter, 1 EtherCONPPIQA845RD - ProPlex IQ One 8 4, 8-way DMX-Ethernet RackMount converter, 4EtherCONPPIQA845RDO - ProPlex IQ One 8 Optical, 8-way DMX-Ethernet RackMountconverter, 3 EtherCON, 1 OpticalCONPPIQA415RD - IQ One 4, 4-way RackMount DMX-Ethernet converter, 1 EtherCONPPIQA415MD - IQ One Mini,4-way DMX-Ethernet converter,1 EtherCONProPlex FibrePCF5B - ProPlex Fibre 5-way OpticalCON QUAD breakout boxComing Soon!ProPlex RMT — Remote Media TransceiversPPRMTDT8R - DVI Transmitter, 8-way RackMountPPRMTDT4R - DVI Transmitter, 4-way RackMountPPRMTDR4P - DVI Receiver,4-way PortableMountPPRMTDR8R - DVI Receiver, 8-way RackMountPPRMTDR4R - DVI Receiver, 4-way RackMountPPRMTS2 - Dual-core passivesplitter, 1 IN, 4 OUT

Built for the Road!Gigabit Ethernet switches designed for portable entertainment production. Rugged!Reconfigurable! Managed and Unmanaged RackMount units, and UnmanagedPortableMount units.RackMount units are fully populated with movable port modules. Multiple combinationsof auto-switching ports can be moved between front and rear panels for practical, gigspecificwiring.Now available withPower overEthernetGBS 2U 28-Way• 28 ports: Up to 28 EtherCON; or 26 + 2OpticalCON. Locking PowerCON main.• Features modular, reconfigurable panels.Connectors can be added, removed, andswapped front to back.• ProPlex “Blue Box” rugged tour-ready 2URackMount.• High-quality switch suitable for all gigabit networkapplications including video transfer.• Reconfigurable! Any combination of RackMount unit’s dataport modules can be moved between front and rear panels.• Fibre connectivity option via one or two heavy-dutyOpticalCON QUAD connectors.• Gigabit Ethernet ports: 7 to 28 auto-switching with tourgradeEtherCON connectors.• Internal components shock-mounted for reliability.• Compatible with a wide range of entertainment-specificprotocols, including HippoNet, ACN, ArtNet, CobraNet,ETCNet, Ethersound, and MA-Net.• Variable power input, 90-260 VAC, 50-60 Hz withPowerCON connector.• PortableMount and Mini come standard with pre-drilled,removable yoke for a variety of convenient mountingoptions.GBSPortableMountWorldwide Exclusive Distribution

Available ConfigurationsCopperOnlyCopperOnly w/PoESingle Fibrew/CopperSingle Fibrew/Copperw/PoEDual Fibrew/CopperDual Fibrew/Copperw/PoE2U RackMount 28-portManagedUnmanaged1U RackMount 10-portManagedUnmanagedPortableMount 8-portUnmanagedDimensionsModel Dimensions in inches [mm] WeightGBS 2U RackMountUnit 19” x 3.5” x 18.5” [482 x 89 x 470] 25 lbs [11.34 Kg]Packaged 22.75” x 7.25” x 21.75” [578 x 184.2 x 552.5] 29 lbs [13.15 Kg]GBS 1U RackMountUnit 19” x 1.75” x 19” [482 x 44.5 x 482] 14 lbs [6.35 Kg]Packaged 22.75” x 5.75” x 21.75” [578 x 146 x 552.5] 17 lbs [7.71 Kg]GBS PortableMountUnit 7.5” x 5.06” x 12” [190.5 x 128.6 x 304.8] 12 lbs [5.44 Kg]Packaged 12” x 8.5” x 16.5” [304.8 x 215.9 x 419.1] 15 lbs [6.8 Kg]GBS PortableMountLITPPXGBSA4-100413

Built for the Road!Ethernet-DMXBidirectional ConvertersIQ One 4IQ One 8IQ One 4 MiniNow availablewithRackMount and PortableMount bidirectional Ethernet-DMX converters. IQOne 4 and IQ One 8 convert between Ethernet and 4 or 8 universes of DMX,respectively. The IQ One 8 Optical provides bidirectional Ethernet to DMX viaNeutrik OpticalCON connector. Featuring web interfaces as well as front-panelcontrols, IQ One products are rugged, intuitive, and quick to configure.• Merging and Ethernet protocol conversion of DMX data (sACN/ArtNet).• Intuitive, simple web interface or front panel control of all basic functions.• All Neutrik connectors: Locking PowerCON, EtherCON, XLR.• Fibre optic version with OpticalCON connector available!• Four or eight DMX universes.• ProPlex “Blue Box” rugged, tour-ready enclosures:RackMount and PortableMount.Worldwide Exclusive Distribution

Technical SpecificationsModel:ProPlex IQONE 4ProPlex IQONE 8ProPlex IQONE 8 4ProPlex IQONE 8 OpticalProPlex IQONE MiniPart Number PPIQA415RD PPIQA815RD PPIQA845RD PPIQA845RDO PRIQA415MDEthernet Ports 1 1 4 3 1DMX Ports 4 8 8 8 4DMX ConnectorsDMX Port IsolationEthernet ConnectorEthernet TypeNetwork ProtocolsAdditional FeaturesNeutrik XLR5 Female (NC5FAV)Optical, up to 1000VNeutrik EtherCON RJ4510/100 Base-TArtNet, sACN (E1.31)HTP merging; scene storage (using OctoNet)Optical Connector N/A N/A N/ANeutrikNO4FDW-RN/APowerPowerConsumptionCoolingOperating Temp.85V-265V, 50-60 Hz10W 10W 10W 25W 10WConvection-20º to +40º COperating Humidity 10-85%Unit Dimensions(WxHxD)19 x 1.75 x 8 in(482 x 44 x 203mm)19 x 1.75 x 8 in(482 x 44 x 203mm)19 x 1.75 x 8 in(482 x 44 x 203mm)19 x 1.75 x 8 in(482 x 44 x 203mm)7.25 x 3 x 8.74 in(186 x 76 x 222mm)Unit Weight(unpacked)5 lbs (2.3 kg) 5 lbs (2.3 kg) 5 lbs (2.3 kg) 6 lbs (2.7 kg) 4.7 lbs (2.1 kg)Packed Dimensions(WxHxD)20.5 x 3.5 x 10.6in(522 x 89 x 269mm)20.5 x 3.5 x 10.6in(522 x 89 x 269mm)20.5 x 3.5 x 10.6in(522 x 89 x 269mm)20.5 x 3.5 x 10.6in(522 x 89 x 269mm)11.8 x 4.2 x 9.4 in(300 x 106 x 240mm)Shipping Weight 5.6 lbs (2.6 kg) 5.6 lbs (2.6 kg) 5.6 lbs (2.6 kg) 6.6 lbs (3 kg) 5 lbs (2.3 kg)© TMB 2012 ALL RIGHTS RESERVED - LITPPXIQONEA4-100413

Opto-SplittersDMX512 optically isolatedsplitter/repeatersHigh-performance, tour-grade signal management solutions!• Shock-mounted circuitry. Designed for extreme conditions and temperatures.• ProPlex “Blue Box” enclosures – RackMount and PortableMount Mini.• Neutrik connectors: Locking PowerCON mains and XLR.• Designed and built for working professionals in entertainment production.Opto-Splitter 2x8• Two DMX512 inputs individually switchable to up to 8 outputs.• DMX regeneration feature ensures compatibility between DMX devices.• Available with all 5-pin XLR connectors or as a 3/5-pin combo unit.• NEW! 2x8 RDM now available with RDM defeat switch on each input!Opto-Splitter 2x10 RDM• Two DMX512 inputs, each with DMX Thru, individually switchable to up to 10 isolated outputs.• Full RDM functionality. RDM defeat switch on each input!Opto-Splitter Mini• One DMX input, 4 or 5 isolated outputs; DMX Thru onRDM models.• Compact, durable Mini “Blue Box” tour-ready enclosure.• For desktop use, or optional yoke for truss mounting.• RackMount kits available, for single or double units.• Full RDM functionality depending on model.• NEW! Now available: DMX-only, RDM, and RDM withLumenRadio Wireless!Worldwide Exclusive Distribution

Technical SpecificationsModel Opto-Splitter 2x8 Opto-Splitter 2x10 RDM Opto-Splitter Mini RDMPart Number PPDDS285 PPDDS2105RR PPDS145MRDMX Inputs 2 XLR5 Male 2 XLR5 Male (back panel) 1 XLR5 MaleDMX Outputs8 XLR5 Female10 Isolated + 2 Thru XLR5Female4 isolated + 1 Thru XLR5FemaleDMX Signal DMX-512ARDMNoYes, individually defeatable foreach input.YesAdditional FeaturesRDM disable switch for eachinput. DMX Termination switchfor each input.DMX Termination SwitchSignal DelayREGENERATION mode:50μsecTHRU mode: < 0.1μsec2μsec (half-bit)2μsec (half-bit)In/Out/Out Isolation Optical to 1000VPower 100-230 VAC, 50-60 Hz (consumption 15W)Mains ConnectorFuseCoolingOperatingTemperatureNeutrik powerCON NAC3MPA2A, 250VConvection-4º to +104º F (-20º to +40º C)Operating Humidity 10 - 85%Unit Dimensions(WxHxD)19 x 1.75 x 3.94 in(482.6 x 44.5 x 100 mm)19 x 1.75 x 8 in(482.6 x 44.5 x 203 mm)7.32 x 3 x 8.74 in(186 x 76 x 222 mm)Unit Weight (unpacked) 3.3 lbs (1.5 kg) 5.5 lbs (2.5 kg) 4.7 lbs (2.1 kg)Packed Dimensions(WxHxD)20.5 x 3.3 x 7.25 in(521 x 84.5 x 184 mm)20.5 x 3.5 x 10.6 in(522 x 89 x 269 mm)11.8 x 4.2 x 9.4 in(300 x 106 x 240 mm)Shipping Weight 3.7 lbs (1.7 kg) 6 lbs (2.7 kg) 5 lbs (2 kg)LITPPDEVOPTOA4-090612

Rock & Roll TacticalFibre Optic CableThe World’s Most Durable Fibre Optic Cable – More thanMilitary Tactical, this Is “Rock & Roll Tactical”!Protect your critical show data with rugged ProPlex Fibre. Designed byTMB, the world leader in entertainment and staging cabling, ProPlex Fibre isbuilt to be the world’s most durable fibre cable. This “Rock & Roll Tactical”cable features double cut-proof military-grade jackets, reinforced with 100%coverage, galvanized steel armouring. Additionally, the internal fibres areprotected with a heavy coating of Kevlar Aramid Fibres. For the ultimate inreliability and protection of critical show data in the entertainment and staging markets, the cablesprovide maximum impact, crush and cut resistance in a flexible easy-to-coil, kink-free design.The standard ProPlex Fibre cable, in stock, available for immediate shipment, features OM3 multi-mode,TAC4, four fibre, quad configuration. Single-mode and other configurations are available by specialorder.ProPlex Fibre Cable AssembliesAlso in stock at TMB are ready-made ProPlex Fibre assemblies, available for immediate shipment. Stockassemblies feature Neutrik OpticalCON Quad connectors, complete with protective caps.Standard stock assembly lengths are: 1.5, 5, 30 and 150 metres. The 150 metre assemblies are suppliedon a professional-grade cable reel, in a durable travel case. All other stock lengths are supplied in aprotective Cordura carrying bag.Other assembly lengths, cables and connector types are available by special order.Neutrik OpticalCON(standard on TMB FibreOptic cable assemblies)• 4 PC optical channels for optimized point-to-point LCinter-connectivity.• Ruggedized, durable all-metal housing.• Spring-loaded push-pull locking mechanism forexcellent cable retention.• OpticalCON protection covers standard on TMB FibreOptic cable assemblies and ProPlex Devices.Reel and rugged travel case standard with assembliesover 30 metres.Length Case Size Reel Size Reel Weight5-100M20x16x12 in. 19.1x15x11.2 in. 10.3 lb508x406x305 mm 485x380x285 mm 4.7 kg101-150M23x19x13 in. 21.8x17.6x12.2 in. 11.9 lb584x483x330 mm 554x445x310 mm 5.4 kg151-300M29x24x11 in. 28x22.8x9.9 in. 30.6 lb737x610x280 mm 710x580x250 mm 13.9 kg

Design and MaterialsBuffer Material Polyester ElastomerBuffer Diameter 900 µmColor code Per TIA/EIA 598-CStrength Elements Aramid YarnsInner Jacket Material PUArmoringServed Galvanized Steel WireOuter Jacket Material PUOuter Diameter 8.5 mm nom.Weight94 kg/kmOuter Jacket Color BlackMarkingTBAStandardsApplicable Standards IEC 60794InstallationGuidelines as per IEC60794-1-1 Annex APerformanceMax. Tensile Strength -Short TermMax. Tensile Strength -Long TermImpact ResistanceImpact ResistanceMax. Crush Resistance2500 N1500 N2.2 N•m100 cycles1100 N/cmMin. Bend Radius for Installation 85 mmMin. Bend Radius for Operation 65 mmRepeated Bending2000 cyclesMax. Operating Temperature +85 °CMin. Operating Temperature -55 °CMax. Storage Temperature +85 °CMin. Storage Temperature -55 °CUV resistanceYesWaterblockingYesFiber SpecificationsISO/IEC 11801 Performance Category OM3 (1)Attenuation (2) , Loose Tube CablesAttenuation (2) , Tight Buffer and Semi-Tight Cables@ 850 nm@ 1300 nm@ 850 nm@ 1300 nm≤ 2.8 dB/km≤ 0.9 dB/km≤ 3.2 dB/km≤ 1.0 dB/kmOFL Bandwidth (3) @ 850 nm ≥ 200 MHz●km@ 1300 nm ≥ 600 MHz●kmEfffective Modal Bandwidth @ 850nm≥ 2000 MHz●kmSupported Ethernet Link Lengths (max.)@ 850 nm (1000BASE-SX)1GbE (4) 970 m (7)@ 1300 nm (1000BASE-LX) 550 m (7)(5)@ 850 nm (10GBASE-SR) 300 m10GbE@ 1300 nm (10GBASE-LX4)300 m40/100 GbE (6) @ 850 nm (40/100 GBASE-SR4/10) 100 mNumerical Aperture 0.20 ± 0.015Core Diameter50 ± 2.5 μmCladding Diameter125 ± 1 μmCore Non Circularity ≤ 4 %Cladding Non-Circularity ≤ 0.7 %Core/Cladding Offset≤ 1.5 μmCoating Diameter (Un-dyed)245 ± 10 μmProof-Test Level0.7 GN/m21. As per IEC 60793-2-10 type A1a.2 and TIA 492AAAC2. For attenuation values of fibers in tactical cables (Product Description TAC-...),3. As per IEC 60794-1-41 and TIA/EIA 455-2044. Per IEEE 802.3z, assuming the requirements of the Standard and associateddocuments are met5. Per IEEE 802.3ae, assuming the requirements of the Standard andassociated documents are met6. Per IEEE 802.3ba, assuming the requirements of the Standard andassociated documents are met7. Calculated per the IEEE 1GbE link modelNeutrik OpticalCON Protective Covers• OpticalCon covers standard on fibre optic assemblies and applicable ProPlex “Blue Boxes”.• Rugged sealing covers fully protect fibre contacts from dust and dirt.• When Line and Chassis connectors are mated, covers also mate to prevent any contamination.© TMB 2012 All Rights Reserved - LITPPXFIBREA4-112712

HOT PATCH POWER DISTRIBUTION SYSTEMSConvenient patchable power distribution anddimming combined in one portable rack!Available in 24- and 48-way systems.YOUR WHOLE SHOW IN ONE RACK!HPS-48Rugged Amptown Flight CaseHPS-24ETC SmartPack CEdimmer packs.ProPlex ® 2x8 DMXsplitter.Branch breakers foreach dimmer pack.Indicator lights letyou know at a glanceif the input power isconnected correctlybefore energisingdimmers.Breakers for nondimmedpatchedchannels and auxoutputs.Auxiliary 1- and 3-phaseconnectors with breakers.Multi-function power monitor.

HOT PATCH POWER DISTRIBUTION SYSTEMSCompletely self-contained dimming and power distribution systemutilising Wieland connectors and patch cables to facilitate patching ofdimmed and non-dimmed circuits to 6-circuit output connectors.All components are securely mounted in a road-ready ATA flight case.HPS-48ETC SmartPacks withWieland output connectors.48 Channels @ 1200W.Integrated lamp test facility.Just patch to this jack tocheck lamp continuity.ETC SmartPacks withWieland output connectors.24 Channels @ 1200W.HPS-24Non-dimmed hot patchcircuits. Patch moving lightsto the same multicore asdimmed channels.400 Amp 3-phase Powerlock mains inlet with feed through.125 Amp 3-phase pinand sleeve mains inlet.ProSeries® 6-circuit output connectorswith Wieland patching inputs.YOUR WHOLE SHOW IN ONE RACK!LITPPCEHPSA4-052912

Rack mounted power distribution with optional dimming anddata distribution. Custom-configured in ATA flight cases to yourspecifications from a complete range of panels and components.• Meticulous craftsmanship.• Finest components.• Years of trouble-free service.ProPower CE RMD systems can be configuredwith ETC ® SmartPack dimmer packs and ProPlex ®Data Distribution Devices. A unique combinationof power and data distribution with dimming!ETC SmartPackDimmersProPlex DataDistribution DevicesOutput panels witha wide variety ofconnector optionsMain and branchbreaker panelsMains input andpass through panelswith a wide varietyof connector andamperage optionsYOUR WHOLE SHOW IN ONE RACK!

MAIN BREAKER PANELS6-63SWDM • [6U] 63A 3-phase MCCBEL VT/VS SW Main Breaker with multifunctionpower monitor.6-400SWDM • [6U] 400A 3-phaseMCCB EL VT/VS SW Main Breakerwith multi-function power monitor.6-400SWDMRCD • [6U] 400A 3-phaseMCCB EL VT/VS SW Main Breakerwith Residual Current Device and multifunctionpower monitor.6-125SWDM • [6U] 125A 3-phaseMCCB EL VT/VS SW Main Breakerwith multi-function power monitor.OUTPUT PANELS3-PS613 • [3U] 6x13A Outlets. Use with3-AB613-1P.3-PS616 • [3U] 6x16A 2P&E 1-phaseOutlets. Use with 3-AB613-1P.3-PS31315 • [3U] 3x13A and 3x15AOutlets. Use with 3-AB31315-1P.6-PS363 • [6U] 3x63A 2P&E 1-phaseOutlets. Use with 3-AB363-1P.3-PS21632 • [3U] 2x32A and 2x16A2P&E 1-phase Outlets. Use with3-AB21632-1P.3-SCH616 • [3U] 6x16A Schuko Outlets.Use with 3-AB616-1P.6-PS363-3 • [6U] 3x63A 3PN&E 3-phaseOutlets. Use with 3-AB363-3P.3-PS21632-3 • [3U] 2x32A and 2x16A3PN&E 3-phase Outlets. Use with3-AB21632-3P.3-619B • [3U] 1x19-Pin ProSeries®6-circuit connector with indicator lights.Use with 3-AB620-1P.3-PS432 • [3U] 4x32A 2P&E 1-phaseOutlets. Use with 3-AB432-1P.3-619A • [3U] 2x19-Pin ProSeries®6-circuit connectors with indicatorlights. Use with 3-AB1220-1P.6-PS1125 • [6U] 1x125A 2P&E 1-phaseOutlet. Use with 3-AB1125-1P.3-PS432-3 • [3U] 4x32A 3PN&E 3-phaseOutlets. Use with 3-AB432-3P.3-619 • [3U] 3x19-Pin ProSeries®6-circuit connectors with indicatorlights. Use with 3-AB1820-1P.6-PS1125-3 • [6U] 1x125A 3PN&E3-phase Outlet. Use with 3-AB1125-3P.

OUTPUT BREAKER PANELS3-AB31315-1P • [3U] 3x13A and 3x15A1-phase MCB.3-AB613-1P • [3U] 6x13A 1-phase MCB.3-AB616-1P • [3U] 6x16A 1-phase MCB.3-AB620-1P • [3U] 6x20A 1-phase MCB.3-AB1220-1P • [3U] 12x20A 1-phaseMCB.3-AB1820-1P • [3U] 18x20A 1-phaseMCB.3-AB1125-3P • [3U] 1x125A 3-phase MCB.3-AB1125-4P • [3U] 1x125A 4-pole MCB.3-AB1125-1P • [3U] 1x125A 1-phase MCB.3-AB363-1P • [3U] 3x63A 1-phase MCB.3-AB620-1P-RCCB • [3U] 6x20A1-phase RCCB.3-AB1220-1P-RCCB • [3U] 12x20A1-phase RCCB.3-AB432-1P • [3U] 4x32A 1-phase MCB.3-AB21632-1P • [3U] 2x16A and 2x32A.1-phase MCB.3-AB363-4P • [3U] 3x63A 4-pole MCB.3-AB363-3P • [3U] 3x63A 3-phase MCB.INPUT PANELS3-AB432-3P • [3U] 4x32A 3-phase MCB.3-AB21632-3P • [3U] 2x16A and 2x32A3-phase MCB.3-PSF132-3 • [3U] 32A 3-phase 3PN&EInlet with Link-through.3-PSFAB132-3 • [3U] 32A 3-phase3PN&E Inlet with Link-through and 32A4-pole MCB Main.6-PLF1400-3 • [6U] 400A 3-phasePowerLock Set with Link-through.Available with EU, USA, or Australianconnector colours.6-PSF163 • [6U] 63A 1-phase 2P&EInlet with Link-through.6-PSI163 • [6U] 63A 1-phase 2P&EInlet.6-PSF163-3 • [6U] 63A 3-phase 3PN&EInlet with Link-through.6-PSI163-3 • [6U] 63A 3-phase 3PN&EInlet.6-PSIAB163 • [6U] 63A 1-phase 2P&EInlet with 63A 2-pole MCB Main.6-PSF1125-3 • [6U] 125A 3-phase3PN&E Inlet with Link-through.6-PSI1125-3 • [6U] 125A 3-phase3PN&E Inlet.6-PSIAB163-3 • [6U] 63A 3-phase3PN&E Inlet with 63A 4-pole MCB Main.

ACCESSORY PANELS1-BV • [1U] Blank Vented Panel1-B • [1U] Blank Panel2-B • [2U] Blank Panel3-PSB1161323 • [3U] Courtesy Outlet Panel, 1x16A 2P&EOutlet with 1-phase MCB and 1x32A 3PN&E Outlet with3-phase MCB.1BGLCE • [1U] Gooseneck LED Task Light3-B • [3U] Blank PanelDIMMING AND DATA DISTRIBUTION PANELSPPR2SL1210P • [2U] ETC SmartPack 12x10A withPowerCon output.PPR2SL1210H • [2U] ETC SmartPack 12x10A with HartingMultipin output.PPR2SL1210V • [2U] ETC SmartPack 12x10A with 19-Pinoutput.ProPlex GBS • GigaBit Ethernet switches with EtherConconnectors. Multiple versions available with and withoutFibre optic.ProPlex Opto Splitters • DMX512 data splitter/repeaters.Multiple versions available with and without RDM.ProPlex IQ • DMX-ArtNet converters. 4 or 8 DMX universesover Ethernet. Fibre optic version also available.PPR2SL615T • [2U] ETC SmartPack 6x15A with UK 15ARoundpin output.PPR2SL615CF • [2U] ETC SmartPack 6x15A with CEE17output.PPR2SL615S • [2U] ETC SmartPack 6x15A with Schukooutput.PPR2SL615F • [2U] ETC SmartPack 6x15A with FrenchSchuko output.PPR2SL615H • [2U] ETC SmartPack 6x15A with Hartingoutput.PPR2SL615P • [2U] ETC SmartPack 6x15A with PowerConoutput.PPR2SL615V • [2U] ETC SmartPack 6x15A with 19-Pinoutput.LITPPCERMD-052412

Compact DMX signaland cable testerActual size(approx.)• Handy, keychain-sized.• Tests DMX cables.• Displays the presence andpolarity of DMX data, inisolation or while in use.• Bright, white LEDtorch built in.• Nine diagnostic indicator LEDs.• Leather belt holster included.• Small, lightweight, brushedaluminium finish.• Dimensions: 0.87” x 5.4”(22 x 137 mm).• Weight: 5.3 oz. (0.15 Kg).• Battery: LR44 x 3 (included).LITPROTESTERA4-053012

Introducing the IncredibleAs seen on: 2013 Eurovision SongContest; 55th Grammy AwardsShow; 2013 ULTRA Music Festival;Kenny Chesney No Shoes NationTour; 85th Annual Academy Awards.Super BrightLED RGBWWash/Strobe/BlinderSustainability AwardMORE SAVINGS! Simultaneous colour wash and strobe in ONE fixture – Saveslabour, time, space, energy, and cost.MORE BRIGHT! 1000 Watt brightness in a single LED Wash/Strobe – Brighterthan all available LED brands.MORE SMOOTH! Instantaneous RGBW colour mixing with 1200Hz refreshrate – Smooth on-camera dimming.MORE VERSATILE! Pixel-map feature divides into 2, 3, 4, 6, or 12 sections forultimate control.MORE SATURATED COLOURS! Intense, deep reds and blues.Ultra-bright greens. Brilliant camera-friendly whites.MORE FLEXIBLE! 36-degree beam angle optimised for most applications.

Light sourcesBeam Spread 36°ColoursAverage colour wavelength(manufacturer rated)Refresh rateIntensity controlControlAC PowerCoolingOperating TemperatureDMX ChannelsDMX ConnectorsMax. power drawPower ConnectorsFixingFixture bodyUnit Dimensions (HxWxD)Shipping Dimensions (HxWxD)Unit WeightShipping weightSpecifications and features are subject to change without notice.SPECIFICATIONS96 CREE LEDs (divided in to 12 pixels)4- R, G, B, Wred: 625 nmgreen: 530 nmblue: 460 nmwhite: >5700K1200 Hz16bit or 8bitDMX-512100-240VAC Universal Input, 50/60 Hz, 1000 Wair-cooled fan-20°C - +40°C3-56 depending on control modeIn/Out - XLR5 F/M1000 WIn- powerCON 20A blueAdjustable yokeAnodised steel8.3 x 19.6 x 5.7 in (21 x 49.7 x 14.5 cm)8.7 x 20.4 x 9 in (22 x 52 x 23 cm)14.3 lb (6.5 kg)24.2 lb (11 kg)LITSOLFLAREA4-121013

RGBW SeriesPowerful Linear High OutputLED Flood FixturesRGBW 10x4 Batten10 Clusters of 4 LEDsRGBW 3x4 Brick3 Clusters of 4 LEDsRGBW 16x1 Half-Batten16 Individually-controlled LEDsLinear LED fixtures with high-intensity RGBW single-chip LEDsgrouped into multiple independent pixels. In-lens colour mixingprevents multicolor shadows. Advanced fixture electronics deliverflicker-free output with smooth 16-bit dimming.• In-lens colour mixing.• Multiple control modes including parametric modes with effects, whole fixturecontrol, and independent pixel control.• Flicker-free output with smooth 16-bit dimming.• 16-bit DMX512 control.

SPECIFICATIONSRGBW 16x1 RGBW 10x4 RGBW 3x4LED Count16 units, 16 diode groups(clusters)40 units, 10 diode groups(clusters)12 units, 3 diode groups(clusters)Colours4 - R, G, B, WBeam Spread 22°Average ColourWavelengthRed - 625 nm, Green - 530 nm, Blue - 460 nm, White - > 5700KControlDMX512ARefresh Rate1200 HzDimming Control16-bitPower100-240 VAC, 50/60 Hz,150W Max.100-240 VAC, 50/60 Hz,400W Max.Air cooled with fanCoolingOperating Temperature -20º to +40ºDMX ChannelsDimensions (L x W x H)3-32 depending on controlmode39.25 x 2.2 x 5.28 in.997 x 56 x 134 mm3-40 depending on controlmode39.1x 3.8 x 5.3 in.994 x 97 x 135 mm100-240 VAC, 50/60 Hz,120W Max.3-20 depending on controlmode11.7 x 3.8 x 5.3 in.297 x 97 x 135 mmWeight 10.6 lb. (4.8 kg) 14.3 lb. (6.5 kg) 6.8 lb. (3.1 kg)DMX ConnectorsIn / Out - XLR 5-Pin Female / MalePower ConnectorsIn / Out - PowerCON 20A blue / greySpecifications and features are subject to change without notice.LITSOLLEDRGBWA4-121013

RGB SeriesPowerful Linear LEDFlood FixturesRGB 12x64 Batten12 Clusters of 64 LEDsRGB 3x64 Brick3 Clusters of 64 LEDsRGB 24x16 Half-Batten24 Clusters of 16 LEDsLinear LED fixtures with high-intensity RGB single-chip LEDs groupedinto multiple independent pixels. Advanced fixture electronics deliverflicker-free output with smooth 16-bit dimming.• Single-chip LEDs deliver even colour.• 120° beam spread.• 16-bit DMX512 control.• Multiple control modes including parametric modes with effects, whole fixturecontrol, and independent pixel control.• Auto voltage sensing.

SPECIFICATIONSRGB 24x16 RGB 12x64 RGB 3x64LED Count384 units, 24 diodegroups (clusters)768 units, 12 diodegroups (clusters)216 units, 3 diode groups(clusters)Colours3 - R, G, BBeam Spread (withoutlens)Average ColourWavelengthRed - 620 nm, Green - 530 nm, Blue - 470 nmControlDMX512ARefresh Rate1200 HzDimming Control16-bitPower100-240 VAC, 48-62 Hz, 100-240 VAC, 48-62 Hz, 100-240 VAC, 48-62 Hz,80W Max.150W Max.50W Max.CoolingAir cooled with fanOperating Temperature -20º to +40ºDMX ChannelsDimensions (L x W x H)3-72 depending on controlmode39.25 x 2.2 x 4.8 in.997 x 56 x 122 mm120°3-48 depending on controlmode39.25 x 4.85 x 3.8 in.997 x 123x 97mm3-20 depending on controlmode11.7 x 4.85 x 3.8 in.297 x 123x 97mmWeight 11.5 lb. (5.2 kg) 11.5 lb. (5.2 kg) 5.3 lb. (2.4 kg)DMX ConnectorsIn / Out - XLR 5-Pin Female / MalePower ConnectorsIn / Out - PowerCON 20A blue / greySpecifications and features are subject to change without notice.LITSOLLEDRGBA4-060313

T-LIGHTBad-Ass Lightning Machine85,000 Watts!FEATURES• Flash length from 1/30 sec to 3.5 sec.• Stainless steel body lasts for years.• DMX512 control.• Beam is adjustable from spot to flood.• Compact, fits into a Pelican case.• Has internal and thermal circuit breaker and residual currentoperated circuit breaker.• Optional controllers can execute pre-programmed or customisedlightning sequences at the push of a button or triggered via DMX512.

T-LIGHTSPECIFICATIONSMaximum continuous flash discharge3.5 secLAMPFrequency of continuous mode120 HzFlash tube typeProprietary Long Arc Xenon TubeColour temperature5600° KelvinCONTROLPARAMETERSIntensity controlAdjustable flash frequencyOverheating protection80°C, 110 °C, self resettingELECTRONIC &Self-testPreprogrammedSAFETY DEVICESIndicator LED’SRed: POWERYellow: MODE/PROTECTIONGreen: DATADigital display and pushbutton programming of parametersCONTROL SYSTEMNumber of channels 2Connection type5-Pin XLRSupported protocolsDMX512Nominal mains voltage190-250 VAC, 50-60 HzPOWER SUPPLY Power requirement100A breakerMax. power draw350AProtection from breaking flash tubeSoft spring suspension systemFixingAdjustable YokeCorrosion protectionStainless steel bodyFIXTURE & HOUSING Unit Dimensions (HxWxD)15” x 33” x 10” / 38 x 84 x 25 cmShipping Dimensions (HxWxD)21” x 41” x 19” / 53 x 104 x 48 cmUnit Weight39 lb. / 17.7 kgShipping Weight54 lb. / 24.5 kgSpecifications and features are subject to change without notice.Dimensionsin Millimeters[Inches]LITSOLTLIGHTA4-090612

15,000 WATTVERY BRIGHTINDOOR STROBESVersatile strobes thatcan be used anywhereeither flash or constantlight is required. Idealfor theatre, concert,dance club, and rentalcompany applications.No comparable strobein the world!FEATURES• 450,000 lumens maximum output!• DMX512 control.• Continuous lighting capability (120Hz).• Automatically controlled electronic safety feature.• Auto voltage sensing.• Thermal shut-down feature.• Highly accurate flashing system.• Three phase system capability.• Compact size.• SELF-Test functions, LED indicators.• Optional controllers can execute pre-programmed or customisedlightning sequences at the push of a button or triggered via DMX512.

SPECIFICATIONSMaximum continuous flash discharge 2.5 secondsLAMPFrequency of continuous mode120 HzFlash tube typeProprietary Long Arc Xenon tubeColour temperature5600° KelvinCONTROLPARAMETERSIntensity controlAdjustable flash frequencyOverheating protection80°C, 110 °C, self resettingELECTRONIC &Self-testPreprogrammedSAFETY DEVICESIndicator LED’SRed: POWERYellow: MODE/PROTECTIONGreen: DATADigital display and pushbutton programming of parametersCONTROL SYSTEMNumber of channels 2Connection type5-Pin XLRSupported ProtocolsDMX512Nominal mains voltage190-260 VAC, 50-60 HzPower requirement20A breakerPOWER SUPPLYContinuous60AMax. power drawTurbo32AProtection from breaking flash tubeSoft spring suspension systemFixingAdjustable yokeCorrosion protectionAluminium bodyFIXTURE &Unit Dimensions (HxWxD)7.5” x 21.5” x 5.5” / 19 x 54.6 x 14 cmHOUSINGShipping Dimensions (HxWxD)10.5” x 23.75” x 9” / 27 x 60.5 x 23 cmUnit weight7.8 lb. (3.6 Kg)Shipping weight10.6 lb. (4.8 Kg)Specifications and features are subject to change without notice.Dimensionsin Millimeters[Inches]LITSOLQUASARA4-090612

15,000 WATTVERY BRIGHTOUTDOORSTROBEFEATURES• Stainless steel housing is rated to IP65.• 450,000 lumens maximum output!• DMX512 control.• Continuous lighting capability (120Hz).• Automatically controlled electronic safety feature.• Auto voltage sensing.• Thermal shut-down feature.• Highly accurate flashing system.• Three phase system capability.• Compact size.• SELF-Test functions, LED indicators.• Optional controllers can execute pre-programmed or customizedlightning sequences at the push of a button or triggered via DMX512.

SPECIFICATIONSMaximum continuous flash discharge 2.5 secondsLAMPFrequency of continuous mode120 HzFlash tube typeProprietary Long Arc Xenon tubeColor temperature5600° KelvinCONTROLPARAMETERSIntensity controlAdjustable flash frequencyOverheating protection80°C, 110 °C, self resettingELECTRONIC &Self-testPreprogrammedSAFETY DEVICESIndicator LED’SRed: POWERYellow: MODE/PROTECTIONGreen: DATADigital display and pushbutton programming of parametersCONTROL SYSTEMNumber of channels 2Connection typeTerminal blockSupported ProtocolsDMX512Nominal mains voltage190-260 VAC, 50-60 HzPower requirement32A breakerPOWER SUPPLYContinuous60AMax. power drawTurbo32AProtection from breaking flash tubeSoft spring suspension systemFixingAdjustable yokeCorrosion protectionStainless steel body, IP65 ratingFIXTURE &Unit Dimensions (HxWxD)9.25” x 19.5” x 12.215” / 23.5 x 49.5 x 31 cmHOUSINGShipping Dimensions (HxWxD)TBAUnit weightTBAShipping weightTBASpecifications and features are subject to change without notice.Dimensionsin Millimeters[Inches]LITSOLQUASAROUTA4-090612

DMX Controlled Architectural Strobe/Warning Light• 35 Joule flash energy, visible for miles.• DMX controlled − 1 channel per fixture.• Automatic addressing.• Opto isolated DMX input, buffered output.• Impact resistant polycarbonate housing, IP67, UV resistant.• Input voltage 200~250VAC, 50/60 Hz, 0.4A.LITSOLCF35A4-090612

• High quality aluminium construction.• Heavy-duty positive-locking yoke.• Available with bright, highly polishednatural aluminium or matt blackenameled finish.• Pre-wired EMEP ceramic socket andProFixture 3x1.5 mm 2 silicone VDEcable.• Blanking plate with built-in lampadjuster.• Includes safety screen, square colourframe and spring-loaded fourth gel foot.• 1000W maximum lamping.

Lamp ReplacementWARNING - Disconnect from power before re-lamping.CAUTION - Lamp may be very hot.• Disconnect fixture from power supply and allow to cool.• Lift cap retainer and remove cap.• Disconnect lampholder or wires from lamp.• Remove lamp retaining ring by squeezing bent ends together andlifting ring away.• Remove old lamp and replace with new lamp.• Refit lamp retaining ring below dimples, making sure lamp can rotatefreely.• Reconnect lampholder or wires.• Refit cap making sure that wires and lamp adjuster allow freemovement of lamp.• Connect to power and re-focus as necessary.Common Lamp TypesLamp Type Voltage Wattage Fuse SizeCP60 / 61 / 62 230V 1000W 5ACP86 / 87 / 88 230V 500W 3AFFN / FFP / FFR / FFS 120V 1000W 8ADYS (with Raylite Reflector) 120V 600W 5A500PAR64 120V 500W 4A4552 28V 250W 10A4559 / Q4559 28V 600W 25ALampholder and wiring configuration varies.Mounting• Make sure that no cables rest in contact with fixture body.• Yoke of fixture may be mounted to a lighting bar, hook clamp, TVspud, or any non-flammable surface using an M10 bolt.• The mounting bolt and hand nut may be used to adjust andmaintain fixture position. Tighten firmly when position is correct.Safety• Replace lamp if cracked or thermally deformed.• Replace mesh screen if damaged or missing.• Make sure that lamp can spin freely after fitting the retaining ring.• Fixture is not rated for and must not be used in environmentscontaining flammable or explosive materials.• A safety cable must always be used to secure fixture to supportingframework.• When barn doors are used, a safety cable must always be loopedfrom the barn door frame to the fixture.• When connecting to power supply, make sure that the fixture isproperly earthed and that the supply is at the rated voltage for thelamp and observe the correct polarity.• Maximum rated ambient temperature is 45° C.• Maximum rated voltage is 250 volts.• Nominal frequency is 50/60 Hertz.LITSTARCANCE-060512

Blizzard 6550 Series Projector EnclosuresBlizzard can handlemost modern projectorsfrom 5,000 up toas much as 15,000ANSI lumens - see theselection guide overthe pageBlizzard 6550 SeriesProjector Enclosures aredesigned specifically formidrange DLP Projectors,and are available with TempestLighting’s patentedDigital Enclosure Control(DEC3.2 TM ) technology tomaintainoptimumprojector andlamp life inthe harshestconditions.Blizzard sets the standardfor elemental protection,low maintenance, and longequipment life.Blizzard is available inthree sizes, accommodatinga range of mediumsizedprojectors up to15,000 ANSI Lumens.Tempest’s patented DEC TMSystem offers intelligentcontrol of temperature,airflow andhumidity,maintainingoptimumoperatingtemperaturein all climate conditions,and eliminating deadlycondensation. All Blizzardenclosures feature easyIt may be blowingsnow out there,but your projectorwill be snugand secure in itsTempest Blizzard TMenclosure. AndBlizzard is just ascomfortable in thetropics, the desert,at sea – in factanywhere you mightneed to use a digitalprojector exposed toMother Nature.access for relamping, andtempered, optical glassprojection windows.There’s even a BlimpedBlizzard option, for soundproofingprojectors inacoustically sensitive locations.The Blizzard 6550 Seriesis a complete protectionsystem that will reducecost and maintenance andextend lamp and projectorlife.

EnclosureFinishExterior grade powder coated aluminum and stainless steel. Wide, tempered opticalglass projection window caters for offset-lens projectors.Exterior grade powder coating: epoxy primer, Cardinal T391-BG290 Bronze Texture.Custom colors to special order.Ordering Guide: Model # Description Type Voltage Projector Maximum:Lamp Power Height Length*6550.IN Blizzard DEC3.2 230 1,300W 10”/25cm 24”/61cm6550.US Blizzard DEC3.2 120 1,300W 10”/25cm 24”/61cm6560.IN Blizzard Fan 230 1,300W 10”/25cm 24”/61cm6560.US Blizzard Fan 120 1,300W 10”/25cm 24”/61cm6555.IN Blizzard Stretch DEC3.2 230 1,300W 12”/30cm 35”/89cm6555.US Blizzard Stretch DEC3.2 120 1,300W 12”/30cm 35”/89cm6565.IN Blizzard Stretch Fan 230 1,300W 12”/30cm 35”/89cm6565.US Blizzard Stretch Fan 120 1,300W 12”/30cm 35”/89cm6556.IN Blizzard X-Stretch DEC3.2 230 1,300W 12”/30cm 42”/107cm6556.US Blizzard X-Stretch DEC3.2 120 1,300W 12”/30cm 42”/107cm6566.IN Blizzard X-Stretch Fan 230 1,300W 12”/30cm 42”/107cmMaximum ProjectorDimensions6566.US Blizzard X-Stretch Fan 120 1,300W 12”/30cm 42”/107cm* Be sure to include thelens in your length calculation!All models: max projectorwidth is 26”/66cm.Enclosure DimensionsNeed somethingSmaller?Check out our BabyBlizzard 6500 SeriesOr Bigger?Our Cyclone 8000Series picks upwhere Blizzardleaves off, for projectorsup to 30,000ANSI lumens!Dimension A B C Weight6550/6560 31”/79cm 33”/84cm 14”/36cm 69lb/31kg6555/6565 41”/104cm 45”/114cm 16”/41cm 89lb/40kg6556/6566 49”/124cm 53”/135cm 16”/41cm 98lb/45kgAccessProjector MountSecurityCooling/HeatingProjector ProtectionCover is removed for installation and maintenance, providing complete open access to theprojector.Projector is held securely in place with two universal stainless steel projector clamps.Rings in the cover latches allow for the inclusion of padlocks for security in public areas.Cooling by a single AC axial fan located on the rear panel. Incoming air is filtered using aremovable, washable air filter in the rear air intake cowl. Heater is a 500W line voltage stripheater (DEC3 models only).Projector power supply passes through a 2-pole mechanical relay (DEC3 models only), whichwill open in the event of a serious over-temperature event, to protect the projector from heatdamage. Threshold levels are user-adjustable.

Digital Enclosure ControlDEC3.2 TM – that’s Digital Enclosure Control, 3rdGeneration – takes enclosure control to the next level.DEC3.2 is a an entirely new controller, featuring highreliabilitysurface-mount electronics, extreme heavy-dutyswitching components, and a handy waterproof usercontrol panel on the outside of the enclosure. DEC3 offerscommunication via DMX and RDM, or may be used inits entirely automatic standalone operating mode. DEC3monitors internal temperature, humidity and lamp currentat all times, and uses this information to control itslamp relay, fans and heaters, and report back over RDM ifdesired.DEC works right out of the box – if you don’t want to playwith its default settings, you don’t need to. DEC’s missionis to maintain temperature and humidity inside the enclosurewithin the ‘Goldilocks’ band – never to hot, nevertoo cold, and never, never, allowing deadly condensationto form. Condensation is fatal to electronic equipment,particularly in polluted areas or saline environments,where it brings not only rust and short-circuits, but also asteady buildup of mineral and salt deposits. Incidentally,this is very hard to control with air-conditioning type systems,which is why we don’t use them.DEC’s function depends on whether the projector lamp ison or off:Lamp ONWhen the projector is running, the heatfrom the lamp takes care of humidity,and DEC runs the enclosure’s fan tochange its air every few seconds – ensuringminimal temperature rise aboveoutside ambient.DEC3’s user interface usesCapSense TM technology for awatertight control panel that’seasy to use and easy to read.LED indicators show the statusof all major functions, and thedisplay shows DMX address,temperature, humidity andany error messages you needto know about.Use the simple menus tooptimize temperature andhumidity settings, set DMXaddress, view and reset lamphour counter, and more.Large Systems? All this isavailable over RDM, in yourcontrol room, or even over theinternet.Lamp OFFWhen the lamp is off, DEC goes to work. When conditionsare within normal bounds, DEC pulses the heater at a lowlevel to prevent condensation, and gently changes theenclosure air every 30 seconds or so. We call this ‘pulsemode’, and it is the key to preventing damaging condensationinside your equipment.If the temperature rises above the topset limit, DEC runs the fans to cool itdown. In cold conditions, DEC will runthe heater as required to maintain thebottom set temperature.And while doing all of this, DEC can tellyou what’s happening over your RDM network – a realboon in larger installations.Wiring InformationElectricalTwo 0.875” (22.2mm) holes are provided for wiring access – one for power, one forsignal. Suits US 1/2” ID/International 20mm OD conduit. IEC 3-pin receptacle providedfor projector power inside enclosure.Note that DEC3 models must be powered 24/7. Installer may provide one or twoswitched feeds as preferred, for projector and enclosure power.Suffix .IN or .US Voltage Max Power * Frequency Projector Receptacle.IN 230 550W 50/60Hz CE17 16amp 2p + E (blue).US 120 550W 50/60Hz NEMA L6-20* DEC3 models - Fan only models are 50W max.

MountingAll Blizzard enclosures may be mounted either base-down, on a solid surface or superstructure,or suspended base-up, under a ceiling, structure or overhang.>Note that the projectoris held securelyin place with twostainless steel projectorclamps. Clampsmay be fixed in avariety of positions toaccomodate differentprojector types.Mounting Hardware(optional)Two parallel 1 5/8” x 13/16” Unistrut. Use standard Unistrut hardware, or order any ofthe mounting kits below. Tempest uses and recommends only stainless steel mountinghardware.4900.MC Stainless Steelpipe clamp kit, for pipes 1.5”(38mm) to 2” (50mm) OD.Four required per enclosure.4925.MC Stainless Steel pipeclamp kit, for pipes 2” (50mm)to 2.5”/64mm OD. Four requiredper enclosure.4900.MB Stainless Steel BoltKit, for attachment to a (usersupplied) mounting plate up to1/4”/6mm thick.Tempest Lighting, Inc. accepts no responsibility whatsoever for damages arising from deficient mounting designor installation by others.Sound Insulation (Blimp)KitsFor applications such as lecture halls and theatres, where the aim of the enclosure is toeliminate projector fan noise, use fan-only Blizzard enclosure, plus a Blizzard Blimp Kit(6500.BK). The kit includes a remote fan, 25’/7.6m of padded hose, and a 1.5”/45mmlayer of sound insulation inside the enclosure.Shipping(Carton Packed)Approvals6550/6560 Carton 36” x 36” x 24” (91 x 91 x 61cm), weight 95lb/43kg6555/6565 Carton 52” x 34” x 20” (130 x 84 x 48cm), weight 120lb/55kg6556/6566 Carton 52” x 34” x 20” (130 x 84 x 48cm), weight 135lb/61kgAll Schedule B Export Code: 8536.30.0000ETL and cETL listed to UL Standard 50, 508CE: EN55015, EN61000-3-4, EN61000-3-5, EN61000-4-2, EN61000-4-3, EN61000-4-4,EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11, EN60598-1NEMA Type 3R Enclosure (approximately equivalent to IP54)This product is protected by US Patent Number 6,352,358.© Tempest Lighting, Inc., November 2011In the interest of continuous product improvement,specifications are subject to change without noticeTempest Lighting, Inc.,13110 Saticoy Street, Unit C, North Hollywood, CA 91605, USAwww.tempestlighting.com info@tempestlighting.comt: +1 818 787 8984f: +1 818 982 5582

Baby Blizzard 6500 SeriesSnow, rain, dust ortropical heat – thisbaby will keep yourcompact digital projectorsnug and secure.In the tropics,the desert, at sea– in fact anywhereyou might want touse a digital projectorexposed to theweather.Baby Blizzard canhandle most modernprojectors up toabout 4,000 ANSIlumens, and someeven brighter – seethe selection guideover the pageBaby Blizzard 6500 SeriesProjector Enclosures aredesigned specifically forsmaller Digital Projectors,with a choice of high andlow speed fans. Choose thelow-speed option for lowpoweredprojectors whereusing industry-standardUnistrut TM hardware.Blizzard sets the standardfor elemental protection,and are now availableacoustic noise is a concern.low maintenance, and longwith Tempest’s patentedAll Blizzard enclosuresequipment life.Digital Enclosure Controlfeature easy access for re-The Blizzard 6500 Series(DEC3.2 TM )lamping, andis a complete protectionsystem, fortempered,system that will pay forultimateoptical glassitself many times over inequipmentprojectionreduced maintenance andprotectionwindows.extended lamp and projec-and longevity in any cli-Baby Blizzard may betor life.mate. For indoor or arid en-mounted on a base or su-vironments, Baby Blizzardperstructure, or suspendedcan be simply force-cooled,below a ceiling or truss,

EnclosureFinishExterior grade powder coated aluminum and stainless steel. Wide, tempered opticalglass projection window caters for offset-lens projectors.Exterior grade powder coating: epoxy primer, Cardinal T391-BG290 Bronze Texture.Custom colors to special order.Ordering Guide: Model # Description Type Max Lamp* VoltageMaximum ProjectorDimensions6500.IN Baby Blizzard Fan 600W 2306500.US Baby Blizzard Fan 600W 1206505.IN Baby Blizzard low-noise Lo-speed Fan 300W 2306505.US Baby Blizzard low-noise Lo-speed Fan 300W 1206510.IN Baby Blizzard DEC3 DEC3 600W 2306510.US Baby Blizzard DEC3 DEC3 600W 1206515.IN Baby Blizzard DEC3, low-noise DEC3, Lo-speed fan 300W 2306515.US Baby Blizzard DEC3, low-noise DEC3, Lo-speed fan 300W 120* Baby Blizzard regularand lo-speed fan enclosuresare approved respectivelyto 810 and 405watts total projector load,including projector powersupplies and fans etc.Enclosure DimensionsWeightWith DEC 31 lb/14kgFan Only 29 lb/13kgAccessThe enclosure cover is removablefor installation andmaintenance, providing excellentaccess. The projectoris held firmly in place withthe adjustable cinch strapprovided.Note the extra-wide projectionwindow, for projectorswith lenses offset fromcenter.Cooling/HeatingCooling by a single AC axial fan located on the rear panel. Incoming air is filtered using aremovable, washable air filter in the front air intake cowl. Heater is a 240W line voltage stripheater (DEC3 models only).

Digital Enclosure Control?DEC3 TM – that’s Digital Enclosure Control, 3rd Generation– takes enclosure control to the next level. DEC3is a an entirely new controller, featuring high-reliabilitysurface-mount electronics, extreme heavy-duty switchingcomponents, and a handy waterproof user control panelon the outside of the enclosure. DEC3 offers communicationvia DMX and RDM, or may be used in its entirelyautomatic standalone operating mode. DEC3 monitorsinternal temperature, humidity and lamp current at alltimes, and uses this information to control its lamp relay,fans and heaters, and report back over RDM if desired.DEC3 works right out of the box – if you don’t want toplay with its default settings, you don’t need to. DEC3’smission is to maintain temperature and humidity insidethe enclosure within the ‘Goldilocks’ band – never to hot,never too cold, and never, never, allowing deadly condensationto form. Condensation is fatal to electronic equipment,particularly in polluted areas or saline environments,where it brings not only rust and short-circuits,but also a steady buildup of mineral and salt deposits.Incidentally, this is very hard to control with air-conditioningtype systems, which is why we don’t use them.DEC3’s function dependson whether the projectorlamp is on or off:Lamp ONWhen the projector/fixtureis running, the heat fromthe lamp takes care of humidity,and DEC3 runs theenclosure’s fan to change itsair every few seconds – ensuringminimal temperature rise above outside ambient.DEC3’s user interface usescapsense TM technology for awatertight control panel that’seasy to use and easy to read.LED indicators show the statusof all major functions, and thedisplay shows DMX address,temperature, humidity andany error messages you needto know about.Lamp OFFUse the simple menus tooptimize temperature andhumidity settings, set DMXaddress, view and reset lamphour counter, and more.Large Systems? All this isavailable over RDM, in yourcontrol room, or even over theinternet.When the lamp is off, DEC3 goes to work. When conditionsare within normal bounds, DEC 3 pulses the heaterat alow level to prevent condensation, andgently changes the enclosure air every 30seconds or so. We call this ‘pulse mode’,and it is the key to preventing damagingcondensation inside your equipment.If the temperature rises above the topset limit, DEC3 runs the fans to cool itdown. In cold conditions, DEC3 will runthe heater as required to maintain thebottom set temperature.And at the same time, DEC3 can tell you what’s happeningover an RDM network – great for larger installations.Wiring InformationOne 0.875” (22.2mm) hole provided for power wiring access. Suits US 1/2” ID/International20mm OD conduit. IEC 3-pin receptacle provided for projector power insideenclosure.One VGA/ethernet signal input port.Note that DEC3 models must be powered 24/7. Installer may provide one or twoswitched feeds as preferred, for projector and enclosure power.

MountingAll Blizzard enclosures may be mounted either base-down, on a solid surface or superstructure,or suspended base-up, under a ceiling, structure or overhang.>Mounting Hardware(optional)Two parallel 1 5/8” x 13/16” Unistrut. Use standard Unistrut hardware, or order any ofthe mounting kits below. Tempest uses and recommends only stainless steel mountinghardware.4900.MC Stainless Steelpipe clamp kit, for pipes 1.5”(38mm) to 2” (50mm) OD.Four required per enclosure.4925.MC Stainless Steel pipeclamp kit, for pipes 2” (50mm)to 2.5”/64mm OD. Four requiredper enclosure.4900.MB Stainless Steel BoltKit, for attachment to a (usersupplied) mounting plate up to1/4”/6mm thick.Tempest Lighting, Inc. accepts no responsibility whatsoever for damages arising from deficient mounting designor installation by others.ShippingCarton 26” x 26” x 13” (66 x 66 x 33cm), weight 45lb/20kgSchedule B Export Code: 8536.30.0000ApprovalsETL and cETL listed to UL Standard 50, 508CE: EN55015, EN61000-3-4, EN61000-3-5, EN61000-4-2, EN61000-4-3, EN61000-4-4,EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11, EN60598-1NEMA Type 3R Enclosure (approximately equivalent to IP54)This product is protected by US Patent Number 6,352,358.© Tempest Lighting, Inc., November 2011In the interest of continuous product improvement,specifications are subject to change without noticeTempest Lighting, Inc.,13110 Saticoy Street, Unit C, North Hollywood, CA 91605, USAwww.tempestlighting.com info@tempestlighting.comt: +1 818 787 8984f: +1 818 982 5582

Cyclone 8000 Series Projector EnclosuresCyclone models canprotect digital projectorsfrom 10,000 upto 35,000 ANSI lumens,in all climates.See the selectionguide over the pageCyclone 8000 Seriesprojector enclosures aredesigned specifically forthe largest digital projectors,and come with TempestLighting’s patentedDigital Enclosure Control(DEC3.2 TM ) technology,to maintainoptimumprojector andlamp life inthe harshestconditions.Cyclone setsthe standard for engineeringquality, elemental protection,low maintenance,and long equipment life.Cyclone is available inthree sizes, accommodatinga range of large-formatprojectors up to 35,000ANSI Lumens. Tempest’spatented DEC TM Systemoffers intelligent control oftemperature, airflow andhumidity,maintainingoptimumoperatingtemperaturein allclimateconditions, and eliminatingdeadly condensation.All Cyclone enclosures featureeasy access for rela-This Cyclone blowsin and protectsyour high-powerdigital projectorfor use outdoors,and in smoke ordust inside. Cycloneenclosures are semicustom,and aretailored to projectortype used. Cyclonemodels are availablefor projectors from10,000 to 35,000ANSI Lumens.mping – the whole projectorslides out for completeaccessibility – and tempered,optical glass projectionwindows.Your projector is a big investment.Cyclone protectsthat investment, typicallyenabling longer lamp andequipment life outdoorsthan in many projectionbooths.Cyclone, by Tempest –world leader in outdoorenclosures. Nothing elsecomes close, when itcomes to protecting yourprojection investment.

EnclosureFinishExterior grade powder coated aluminum and stainless steel. Wide, tempered opticalglass projection window caters for offset-lens projectors.Exterior grade powder coating: epoxy primer, Cardinal T391-BG290 Bronze Texture.Custom colors to special order.Ordering Guide: Model # Description Control Voltage Projector Maximum Lamp Power8200.IN Cyclone 8200 DEC3.2 230 5,000W8200.US Cyclone 8200 DEC3.2 208 5,000W8210.IN Cyclone 8210 DEC3.2 230 5,000W8210.US Cyclone 8210 DEC3.2 208 5,000W8400.IN Cyclone 8400 DEC3.2 230 6,500W8400.US Cyclone 8400 DEC3.2 208 6,500WMaximum ProjectorDimensionsFG* Be sure to include thelens in your length calculation!HEnclosure DimensionsADesigned to fit:8000 BARCO SLM-R12BARCO CLM-R10+Christie HD10K-MDP Titan Pro Srs. IISony VPLFX52BC8200 8210 8400A 34”/86cm 36”/91cm 34”/86cmB 58”/147cm 58”/147cm 74”/188cmC 54”/137cm 54”/137cm 70”/178cmD 30”/76cm 35”/89cm 33”/84cmE 23”/58cm 23”/58cm 23”/58cmF 45”/114cm 45”/114cm* 62”/157cm8200 Christie HD+18KChristie HD+20KG 30”/76cm 32”/81cm 30”/76cmH 22”/56cm 28”/71cm 25”/64cm8210 BARCO FLM HD18BARCO FLM R20+D* Lens extender option available for longerlenses - contact factory.1”/25mm8400 BARCO XLM HD30Christie HD+35K...and similarprojectorsTemperedoptical glassprojectionwindowEUnistrut MountingChannelsAccessProjector MountSecurityCooling/HeatingProjector ProtectionFront and back doors open (hinged on bottom edge), and the projector tray slides out of thefront of the enclosure, on 500lb (227kg) rated ball-bearing slides.Projector is held securely in place with two universal stainless steel projector clamps.Rings in the cover latches allow for the inclusion of padlocks for security in public areas.Cooling by four AC axial fans located on the rear panel. Incoming air is filtered using aremovable, washable air filter in the rear air intake cowl. Heater is a 500W line voltage stripheater (2 for Cyclone 8200, 8400).Projector power supply passes through a 2-pole mechanical relay, which will open in theevent of a serious over-temperature event, to protect the projector from heat damage.Threshold levels are user-adjustable.

Digital Enclosure Control?DEC3.2 TM – that’s Digital Enclosure Control, 3rd Generation– takes enclosure control to the next level. DEC3is a an entirely new controller, featuring high-reliabilitysurface-mount electronics, extreme heavy-duty switchingcomponents, and a handy waterproof user control panelon the outside of the enclosure. DEC offers communicationvia DMX and RDM, or may be used in its entirelyautomatic standalone operating mode. DEC monitorsinternal temperature, humidity and lamp current at alltimes, and uses this information to control its lamp relay,fans and heaters, and report back over RDM if desired.DEC3 works right out of the box – if you don’t want toplay with its default settings, you don’t need to. DEC’smission is to maintain temperature and humidity insidethe enclosure within the ‘Goldilocks’ band – never to hot,never too cold, and never, never, allowing deadly condensationto form. Condensation is fatal to electronic equipment,particularly in polluted areas or saline environments,where it brings not only rust and short-circuits,but also a steady buildup of mineral and salt deposits.Incidentally, this is very hard to control with air-conditioningtype systems, which is why we don’t use them.DEC’s function depends on whether the fixture/projectorlamp is on or off:Lamp ONWhen the projector is running, the heatfrom the lamp takes care of humidity, andDEC runs the enclosure’s fans to change itsair every few seconds – ensuring minimaltemperature rise above outside ambient.Lamp OFFWhen the lamp is off, DEC goes to work.When conditions are within normal bounds,DEC 3 pulses the heater at a low level toprevent condensation, and gently changesthe enclosure air every 30 seconds or so.We call this ‘pulse mode’, and it is the key to preventingdamaging condensation inside your equipment.If the temperature rises above the top set limit, DEC runsthe fans to cool it down. In cold conditions, DEC will runthe heater as required to maintain the bottom set temperature.And while doing all of this, DEC can tell you what’s happeningover your RDM network – a real boon in largerinstallations.DEC3’s user interface usesCapSense TM technology for awatertight control panel that’seasy to use and easy to read.LED indicators show the statusof all major functions, and thedisplay shows DMX address,temperature, humidity andany error messages you needto know about.Use the simple menus tooptimize temperature andhumidity settings, set DMXaddress, view and reset lamphour counter, and more.Large Systems? All this isavailable over RDM, in yourcontrol room, or even over theinternet.Operating ModesStandalone: The enclosure operates independently, andautomatically, requiring no user intervention. User mayset parameters such as temperature and humidity thresholds,and monitor sensor information and DEC status atthe DEC user interface. Standalone is thedefault DEC setup mode unless specifiedotherwise.DMX: All of the Standalone features, butthe user can override the lamp relay overDMX, providing simple on/off control forprojector power.RDM: As above, plus the ability to discoverand monitor DEC over RDM.DEC is why, again and again, users aroundthe world have chosen Tempest enclosuresto protect their investment in lighting and projectionequipment.Tempest Lighting and DEC – A combination that keepsyou looking good, and saves you money.

Mounting Hardware(optional)Two parallel 1 5/8” x 13/16” Unistrut. Use standard Unistrut hardware, or order any ofthe mounting kits below. Tempest uses and recommends only stainless steel mountinghardware.4900.MC Stainless Steelpipe clamp kit, for pipes 1.5”(38mm) to 2” (50mm) OD.Four required per enclosure.4925.MC Stainless Steel pipeclamp kit, for pipes 2” (50mm)to 2.5”/64mm OD. Four requiredper enclosure.4900.MB Stainless Steel BoltKit, for attachment to a (usersupplied) mounting plate up to1/4”/6mm thick.Tempest Lighting, Inc. accepts no responsibility whatsoever for damages arising from deficient mounting designor installation by others.Wiring InformationElectricalOrderingShipping(Crated)ApprovalsTwo 0.875” (22.2mm) holes and two 1.375” (35mm) holes are provided for wiring access.Installer must provide flexible conduit connections to all access holes used. Plugsare provided for unused wiring access holes.One power receptacle is provided for projector power connection. Receptacle type maybe specified at time of order.Note that Cyclone enclosures must be powered 24/7. Installer may provide one or twoswitched feeds as preferred, for projector and enclosure power.Cyclone 8400 for Christie HD+30/35 models: the lamp ballast is to be housed separatefrom the Cyclone enclosure, which is for the projector only. Two CamLok connectorsare provided on the rear door for ballast cable connections.Suffix .IN or .US Voltage Max Power Frequency Projector Receptacle.IN 230 1,050W 50/60Hz NEMA L6-20 or L6-30*.US 208 1,050W 50/60Hz NEMA L6-20 or L6-30*A male plug will be provided with each enclosure to install on the projector power cableThe following information is required with each order:• Projector type, model number and lamp power• Enclosure color: Standard (light bronze) or custom - provide RAL or Pantone #• Mounting – on bottom, top or side(s)• Supply Voltage8200 62”x37”x29”(h), weight 350lb* - 150 x 99 x 86cm, 159kg*8210 62”x43”x35”(h), weight 380lb* - 157 x 109 x 89cm, 173kg*8400 85”x46”x41”(h), weight 400lb* - 216 x 117 x 104cm, 182kg*All Schedule B Export Code: 8536.30.0000* Weights may vary, due to customization and fittings required fordifferent projector typesETL and cETL listed to UL Standard 50, 508CE: EN55015, EN61000-3-4, EN61000-3-5, EN61000-4-2, EN61000-4-3, EN61000-4-4,EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11, EN60598-1NEMA Type 3R Enclosure (approximately equivalent to IP54)This product is protected by US Patent Number 6,352,358.© Tempest Lighting, Inc., November 2011In the interest of continuous product improvement,specifications are subject to change without noticeTempest Lighting, Inc.,13110 Saticoy Street, Unit C, North Hollywood, CA 91605, USAwww.tempestlighting.com info@tempestlighting.comt: +1 818 787 8984f: +1 818 982 5882

Tornado 2050 Moving Light EnclosureThose little movers are getting more powerfulevery day — some 300W spot andLED wash fixtures are doing the jobs ofolder 700W and even 1200W lights. Enterthe new Tornado 2050s, a family of weather-resistantenclosures designed to provideoptimum lifetime and operating conditionsfor the new generation of compact automatedluminaires in exterior locations. Anyclimate. Anywhere.The newTornado 2050s come with Tempest’s revolutionaryDEC3.2 TM control system — all the security andreliability of Tempest’s patented Digital Enclosure Controlgenerations 1 and 2, but now featuring DMX control,user-definable temperature and humidity settings, and anifty new control panel, so you know exactly what’s goingon inside every enclosure.Best of all, DEC3.2 is available now with optional RDMremote monitoring, so you know exactly what’s going onout there — without climbing a ladder. DEC3.2 even featuresa lamp hour counter, so you know when to relamp— before the lights go out...Tornado 2050 –complete protectionfor compact movinghead luminaires inoutdoor applications...The Tornado 2050 enclosurecomprises a cleardome, in which the luminairehas complete freedomof movement, and afiberglass base, containingTempest’s patented DigitalEnclosure Control electronics,fan and heatingelements.controls humidity and dewpoint, eliminating condensationand corrosion, 24/7.When the fixture is running,Tornado’s powerfulfans exchange the filteredair inside the enclosureevery few seconds, ensuringlong lamp and equipmentlife.power including the newgeneration of moving LEDwash lights.Tornados have been operatingfor years in deserts,through winters, and atsea, all over the world.Now it’s your turn.By monitoring the interiortemperature and humidityof the enclosure, DEC3.2Tornado 2050 is intendedfor most moving head luminairesup to 300W lamp

ConstructionFor Luminaire Type:Fiberglass base, painted with outdoor-rated UV-resistant enamel. Acrylic optically clear250º x 360º projection globe, 24” (610mm) diameter. All stainless steel internal fittingsand hardware.Most spot and LED wash moving head luminaires up to300W, mounting with one or two omega clamps.Please check intended luminaire type with Tempest Lightingbefore ordering.MountingTwo parallel 1 5/8” x 13/16” Unistrut. Four stainless steel bolts, washers and channelnuts are included with each Tornado enclosure (shown shaded below). For Pipe mounting,order four of either of the Tempest stainless steel mounting kits shown here.4900.MCT Stainless Steel pipe clamp kit, for pipes 1.5” (38mm) to2” (50mm) OD. Four required per enclosure.4925.MCT Stainless Steel pipe clamp kit, for pipes 2” (50mm) to2.5”/64mm OD. Four required per enclosure.Tempest Lighting, Inc. accepts no responsibility whatsoever for damages arising fromdeficient mounting design or installation by others.Security3 Heavy-Duty stainless steel key draw latches, with secondary catch. Stainless steel eyeboltfor safety bond. Order Marine Latch Option 2000.ML for bolt-down marine gradelatches.FinishClimate ControlCoolingExterior grade UV-resistant enamel coating, white or gray as standard. Custom colorsavailable to special order. All RAL colors and most Pantone colors can be matched asrequired.Patented Digital Enclosure Control (DEC3) System, microprocessor controller and displaycontrols temperature, humidity and dewpoint. DEC3 system runs 24/7 for roundthe-clockprotection.Factory default settings may be used without any adjustment, or user may modify temperatureand humidity threshold settings to optimize performance in different climatetypes and with different equipment.All values and status information are available for remote monitoring over RDM (formore information, please refer to DEC3 data sheet).Filtered fresh air cooled using powerful AC fan.Washable air inlet filters may be simply removed for periodic cleaning.HeatingProtectionControl WiringElectrical ConnectionsOrientationProportionally controlled 300 watt heater dries intake air and maintains internal temperaturewithin bounds in cold climates. Heater pulses when luminaire is detected to beoff, to maintain internal temperatures above dewpoint and prevent condensation.Fixture over-temperature double pole relay isolates fixture if temperature exceeds safeoperating limit. This relay may also be controlled over DMX, providing a simple ‘hardreset’ in the event of fixture malfunction.DMX IN terminal on main circuit board. Two DMX THRU terminals - one for internal fixture,and one to next enclosure. Cable by others.Connections landed through conduit entry port provided on enclosure base.Enclosure – hardwired on site, 200-240VAC, 50/60Hz, 5amps (max)Light Fixture: Americas: NEMA L5-15 Edison receptacle providedAsia/Europe: CE17 16amp receptacle providedTornado 2050 may be installed base down, base up or horizontal - please specify whenordering.

Digital Enclosure ControlDEC3.2 TM – that’s Digital Enclosure Control, 3rd Generation –takes enclosure control to the next level. DEC3.2 is a an entirelynew controller, featuring high-reliability surface-mount electronics,extreme heavy-duty switching components, and a handywaterproof user control panel on the outside of the enclosure.DEC3.2 offers communication via DMX and RDM, or may be usedin its entirely automatic standalone operating mode. DEC3.2monitors internal temperature, humidity and lamp current at alltimes, and uses this information to control its lamp relay, fansand heaters, and report back over RDM if desired.DEC3.2 works right out of the box – if you don’t want to playwith its default settings, you don’t need to. DEC3.2’s missionis to maintain temperature and humidity inside the enclosurewithin the ‘Goldilocks’ band – never to hot, never too cold, andnever, never, allowing deadly condensation to form. Condensationis fatal to electronic equipment, particularly in pollutedareas or saline environments, where condensation brings notonly rust and short-circuits, but also a steady buildup of mineraland salt deposits. Incidentally, this is very hard to control withair-conditioning type systems, which is why we don’t use them.DEC3.2’s function depends on whether the fixture/projectorlamp is on or off:Lamp ONWhen the projector/fixture is running, the heat from the lamptakes care of humidity, and DEC3.2 runs the enclosure’s fans tochange its air every few seconds – ensuring minimal temperaturerise above outside ambient.Lamp OFFWhen the lamp is off, DEC3.2 goes to work. When conditions arewithin normal bounds, DEC 3 pulses the heater at a low level toprevent condensation, and gently changes the enclosure air every30 seconds or so. We call this ‘pulse mode’, and it is the keyto preventing damaging condensation inside your equipment.If the temperature rises above the top set limit, DEC3.2 runsthe fans to cool it down. In cold conditions, DEC3.2 will run theheater as required to maintain the bottom set temperature.DEC3.2’s user interface usescapsense TM technology for awatertight control panel that’seasy to use and easy to read.LED indicators show the statusof all major functions, and thedisplay shows DMX address,temperature, humidity andany error messages you needto know about.And while doing all of this, DEC3.2 can tell you what’s happeningover your RDM network – a real boon in larger installations.Operating ModesUse the simple menus tooptimize temperature andhumidity settings, set DMXaddress, view and reset lamphour counter, and more.And if you need to step backfrom the Tornado enclosure,all of this is available overRDM, in your control room, orover the internet.Standalone: The enclosure operates independently, and automatically,requiring no user intervention. User may set parameterssuch as temperature and humidity thresholds, and monitorsensor information and DEC status at the DEC3.2 user interface.Standalone is the default DEC3.2 setup mode unless specifiedotherwise.DMX: All of the Standalone features, but the user can overridethe lamp relay over DMX, to force a hard reset of any movinglight that loses its mind!RDM: As above, plus the ability to discover and monitor DEC3.2over RDM.DEC is why, again and again, users around the world have chosenTempest enclosures to protect their investment in Lightingand projection equipment.Tempest Lighting and DEC3.2 – A combination that keeps youlooking good, and saves you money.

Ordering InformationThe following information must be provided with each order:• Luminaire type, model number and lamp power• Orientation (base-down, base-up, or other angle)• Custom Colors – provide RAL or Pantone reference• .US style (NEMA 5-15 Edison receptacle) or .INternational (CE17 16amp (blue) receptacle)2050.IN Tornado 2050 Enclosure, DEC3 Control, 230VAC, CE17 Receptacle2050.US Tornado 2050 Enclosure, DEC3 Control, 120VAC, NEMA L5-15 Receptacle2060.IN Tornado 2050 Enclosure, Fan Only, 230VAC, CE17 Receptacle2060.US Tornado 2050 Enclosure, Fan Only, 120VAC, NEMA L5-15 Receptacle0000.RD RDM Functionality – optional – order one for each enclosure0000.CC Custom Color - specify RAL or Pantone or provide chip to match4900.MCT 2” Pipe Clamp Kit - 4 required per enclosure4925.MCT 2.5” Pipe Clamp Kit - 4 required per enclosureDimensions & WeightsWeight: 42 lb/19kGShipping Weights/Dims.Palletized Carton32”x32”x46” (h), weight 80lb - 81 x 81 x 102cm, 37kgSchedule B Export Code: 8536.30.0000ApprovalsETL and cETL listed to UL Standard 50, 508CE: EN55015, EN61000-3-4, EN61000-3-5, EN61000-4-2, EN61000-4-3, EN61000-4-4,EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11, EN60598-1NEMA Type 3R Enclosure (approximately equivalent to IP54)This product is protected by US Patent Number 6,352,358.©Tempest Lighting, Inc., November, 2011.In the interest of continuous product improvement,specifications are subject to change without noticeTempest Lighting, Inc.,13110 Saticoy Street, Unit C, North Hollywood, CA 91605, USAwww.tempestlighting.com info@tempestlighting.comt: +1 818 787 8984f: +1 818 982 5582

Tornado 2000–2300 Moving Light EnclosuresTouchdown! The Tempest Tornado is aweather-resistant enclosure designed toprovide optimum lifetime and operatingconditions for high-powered automatedluminaires in exterior locations.The all-newTornado 2300 - asafe haven for allknown 1200W and1500W moving headluminaires...Tornado enclosurescomprise a clear dome, inwhich the luminaire hascomplete freedom of movement,and an aluminumbase, containing Tempest’spatented Digital EnclosureControl electronics, fansand heating elements.By monitoring the interiortemperature and humidityof the enclosure, DECcontrols humidity and dewpoint, eliminating conden-And now, Tornado comes with Tempest’s revolutionaryDEC3.2 TM control system - all the securityand reliability of Digital Enclosure Control generations1 and 2, but now featuring DMX control, userdefinabletemperatureand humidity settings,and a nifty new controlpanel, so you knowexactly what’s going oninside every enclosure.Best of all, DEC3.2 is available with optional RDMremote monitoring, so you know exactly what’sgoing on — without climbing a ladder. DEC3.2 evenfeatures a lamp hour counter, so you know when torelamp — before the lights go out...sation and corrosion, 24/7. on the list, we’ll test it andWhen the fixture is running,Tornado’s powerful project.approve it as part of yourfans exchange the filteredTornados have been operatingfor years in deserts,air inside the enclosureevery 3-4 seconds, ensuringlong lamp and equip-through winters, and atsea, all over the world.ment life.Now it’s your turn.Tornado 2300 has beentested and approved formost 1200W and 1500Wmoving head luminaires,and the list is growing allthe time. If your light is not

ConstructionExterior grade powder coated aluminum and stainless steel. Acrylic optically clear 250ºx 360º projection globe, 36” (915mm) diameter.For Luminaire Type:(these fixtures have beentested and approved withthis enclosure – call us forfixtures not on this list)2050All Moving heads below 350W2000All 500-700W Moving HeadsRobe 3000DT2200Vari-Lite VL2500Vari-Lite VL2500WVari-Lite VLX2300Clay Paky Alpha Spot 1200Clay Paky Alpha Wash 1200Clay Paky Alpha Beam 1500Coemar Infinity Spot XLDTS XR3000Martin MAC 2000Martin MAC IIIRobe 2500E ATVari-Lite VL3000/3000WVari-Lite VL3500/3500W2400High End Showgun, ShowbeamHigh End DL3Robe 7000DTMountingTwo parallel 1 5/8” x 13/16” Unistrut. Four stainless steel bolts, washers and channelnuts are included with each Tornado enclosure (shown shaded below). For Pipe mounting,order four of either of the Tempest stainless steel mounting kits shown here.4900.MCT Stainless Steelpipe clamp kit, for pipes 1.5”(38mm) to 2” (50mm) OD.Four required per enclosure.Tempest Lighting, Inc. acceptsno responsibility whatsoeverfor damages arising from deficientmounting design or installationby others.SecurityFinishClimate ControlCoolingHeatingProtectionControl WiringElectrical Connections4925.MCT Stainless Steelpipe clamp kit, for pipes 2”(50mm) to 2.5”/64mm OD.Four required per enclosure.For Pole Mounting, use this drawing to fabricate a mounting plate atop the pole. Werecommend the use of stainless steel for all mounting hardware.All mounting structures must be approved to local engineering and safety codes.4 Heavy-Duty stainless steel key draw latches, 2 with secondary catch. Stainless steeleyebolt for safety bond. Order Marine Latch Option 2000.ML for bolt-down marinegrade latches.Exterior grade epoxy powder coat, charcoal metallic. Custom colors available to specialorder. All RAL colors and most Pantone colors can be matched as required.Patented Digital Enclosure Control (DEC3.2) System, microprocessor controller anddisplay controls temperature, humidity and dewpoint. DEC3.2 system runs 24/7 forround-the-clock protection.Factory default settings may be used without any adjustment, or user may modify temperatureand humidity threshold settings to optimize performance in different climatetypes and with different equipment.All values and status information are available for remote monitoring over RDM (formore information, please refer to Tornado manual).Filtered fresh air cooled using powerful AC fans. Tornado 2400 has six fans, 2300 hasfour fans; Tornado 2000 and 2200 have two fans, and Tornado 2050 has one. Washableair inlet filters may be simply removed for periodic cleaning.Proportionally controlled 500 watt heater(s) dry intake air and maintain internal temperaturewithin bounds in cold climates. Heaters pulse when fixture lamp is detected to beoff, to maintain internal temperatures above dewpoint and prevent condensation.Fixture over-temperature double pole relay isolates fixture if temperature exceeds safeoperating limit. This relay may also be controlled over DMX, providing a simple ‘hardreset’ in the event of fixture malfunction.DMX IN terminal on main circuit board. Two DMX THRU terminals - one for internal fixture,and one to next enclosure. Cable by others.Connections landed through conduit entry port provided on enclosure base.Enclosure – hardwired on site, 200-240VAC, 50/60Hz, 5amps (max)Light Fixture: Americas: NEMA L6-20 receptacle providedAsia/Europe: CE17 16amp receptacle provided

OrientationStandard product is for base-down operation (figure 1). For base-up operation, add suffixV to part number (figure 2). For Horizontal operation, add suffix H (figure 3).fig. 1 — Base Down Operation.Use standard part number.fig. 2 — Base Up Operation.Add part number suffix Vfig. 3 — Horizontal Operation.Add part number suffix HDigital Enclosure ControlDEC3.2 TM – that’s Digital Enclosure Control, 3rd Generation –takes enclosure control to the next level. DEC3.2 is a an entirelynew controller, featuring high-reliability surface-mount electronics,extreme heavy-duty switching components, and a handywaterproof user control panel on the outside of the enclosure.DEC3.2 offers communication via DMX and RDM, or may be usedin its entirely automatic standalone operating mode. DEC3.2monitors internal temperature, humidity and lamp current at alltimes, and uses this information to control its lamp relay, fansand heaters, and report back over RDM if desired.DEC3.2 works right out of the box – if you don’t want to playwith its default settings, you don’t need to. DEC3.2’s missionis to maintain temperature and humidity inside the enclosurewithin the ‘Goldilocks’ band – never to hot, never too cold, andnever, never, allowing deadly condensation to form. Condensationis fatal to electronic equipment, particularly in pollutedareas or saline environments, where condensation brings notonly rust and short-circuits, but also a steady buildup of mineraland salt deposits. Incidentally, this is very hard to control withair-conditioning type systems, which is why we don’t use them.DEC3.2’s user interface usescapsense TM technology for awatertight control panel that’seasy to use and easy to read.LED indicators show the statusof all major functions, and thedisplay shows DMX address,temperature, humidity andany error messages you needto know about.Use the simple menus tooptimize temperature andhumidity settings, set DMXaddress, view and reset lamphour counter, and more.And if you need to step backfrom the Tornado enclosure,all of this is available overRDM, in your control room, orover the internet.DEC3.2’s function depends on whether the fixture/projectorlamp is on or off:Lamp ONWhen the projector/fixture is running, the heat from the lamptakes care of humidity, and DEC3.2 runs the enclosure’s fans tochange its air every few seconds – ensuring minimal temperaturerise above outside ambient.Lamp OFFWhen the lamp is off, DEC3.2 goes to work.When conditions are within normal bounds, DEC3 pulses the heater at a low level to preventcondensation, and gently changes the enclosureair every 30 seconds or so. We call this ‘pulsemode’, and it is the key to preventing damagingcondensation inside your equipment.If the temperature rises above the top set limit,DEC3.2 runs the fans to cool it down. In coldconditions, DEC3.2 will run the heater as requiredto maintain the bottom set temperature.And while doing all of this, DEC3.2 can tell youwhat’s happening over your RDM network – areal boon in larger installations.Operating ModesStandalone: The enclosure operates independently, and automatically,requiring no user intervention. User may set parameterssuch as temperature and humidity thresholds, and monitorsensor information and DEC status at the DEC3.2 user interface.Standalone is the default DEC3.2 setup mode unless specifiedotherwise.DMX: All of the Standalone features, but the user can overridethe lamp relay over DMX, to force a hard reset ofany moving light that loses its mind!RDM: As above, plus the ability to discover andmonitor DEC3.2 over RDM.DEC is why, again and again, users around theworld have chosen Tempest enclosures to protecttheir investment in Lighting and projectionequipment.Tempest Lighting and DEC3.2 – A combinationthat keeps you looking good, and saves youmoney.

Ordering InformationThe following information must be provided with each order:• Luminaire type, model number and lamp power• Orientation (base-down, base-up, or other angle)• Custom Colors – provide RAL or Pantone reference• .US style (NEMA 6-20 receptacle) or .INternational (CE17 16amp (blue) receptacle)2000.IN Tornado 2000, for all moving head luminaires up to 700W 30”/76cm Globe2000.US Tornado 2000, for all moving head luminaires up to 700W 30”/76cm Globe2200.IN Tornado 2200, for some moving head luminaires up to 1200W 36”/91cm Globe2200.US Tornado 2200, for some moving head luminaires up to 1200W 36”/91cm Globe2300.IN Tornado 2300, for all moving head luminaires up to 1500W 36”/91cm Globe2300.US Tornado 2300, for all moving head luminaires up to 1500W 36”/91cm Globe0000.RD RDM Functionality – optional – order one for each enclosureFor Tornado 2050 (up to 300W fixtures) and Tornado 2400 (2500W fixtures), see dedicated data sheetsImportant: Add Suffix V for Base-up installation, Suffix H for Horizontal, eg 2300.INH, 2000.USVDimensions & WeightsModel A B C D E F G Weight2000 30/76 38/97 15/38 32/80* 12.5/31.8 16/41 12/30 80/362200-2300 36/91 45/114 15/38 32/80* 12.5/31.8 16/41 12/30 85/39* Base Up and Horizontal versions, D = 36”/91cmDimensions shown in inches/centimeters. Weight in pounds/kilos.Shipping Weights/Dims.(Palletized Carton)Approvals2000 39”x39”x54” (h), weight 145lb - 100 x 100 x 137cm, 66kg2200-2300 39”x39”x54” (h), weight 152lb - 100 x 100 x 137cm, 69kgAll Schedule B Export Code: 8536.30.0000ETL and cETL listed to UL Standard 50, 508CE: EN55015, EN61000-3-4, EN61000-3-5, EN61000-4-2, EN61000-4-3, EN61000-4-4,EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11, EN60598-1NEMA Type 3R Enclosure (approximately equivalent to IP54)This product is protected by US Patent Number 6,352,358.©Tempest Lighting, Inc., November, 2011In the interest of continuous product improvement,specifications are subject to change without noticeTempest Lighting, Inc.,13110 Saticoy Street, Unit C, North Hollywood, CA 91605, USAwww.tempestlighting.com info@tempestlighting.comt: +1 818 787 8984f: +1 818 982 5582

Tornado 2400 Moving Light EnclosuresThis is the Big One - the Tempest Tornado TMfor the largest moving lights out there.TheTornado 2400 is a weather-resistant enclosuredesigned to provide optimum lifetimeand operating conditions for really highpoweredautomated luminaires in exteriorlocations. Any climate. Anywhere.Tornado 2400 – theONLY way to protectthose extra-largemoving head luminairesin outdoorapplications...The Tornado 2400 enclosurecomprises a cleardome, in which the luminairehas complete freedomof movement, and afiberglass base, containingTempest’s patented DigitalEnclosure Control electronics,fans and heatingelements.By monitoring the interiortemperature and humidityof the enclosure, DEC3.2controls humidity and dewAnd now, Tornado 2400 comes with Tempest’s revolutionaryDEC3.2 TM control system - all the security andreliability of Digital Enclosure Control generations 1 and2, but now featuring DMXcontrol, user-definabletemperature and humiditysettings, and a nifty newcontrol panel, so you knowexactly what’s going oninside every enclosure.Best of all, DEC3.2 is shipping now with optional RDMremote monitoring, so you know exactly what’s going on— without climbing a ladder. DEC3 even features a lamphour counter, so you know when to relamp — before thelights go out...point, eliminating condensationand corrosion, 24/7. is growing all the time. Ifluminaires, and the listWhen the fixture is running,Tornado’s powerful we’ll test it and approve ityour light is not on the list,fans exchange the filtered as part of your project.air inside the enclosureTornados have been operatingfor years in deserts,every few seconds, ensuringlong lamp and equipmentlife.through winters, and atsea, all over the world.Tornado 2400 has beenNow it’s your turn.tested and approved foruse with High End Showgun,Showbeam DL3and similar moving head

ConstructionFor Luminaire Type:(these fixtures have beentested and approved withthis enclosure – call us forfixtures not on this list)MountingFiberglass base, painted with outdoor-rated UV-resistant enamel. Acrylic optically clear250º x 360º projection globe, 42” (1067mm) diameter.High End ShowgunHigh End ShowbeamHigh End ShowpixRobe DP7000...and similar unitsTwo parallel 1 5/8” x 13/16” Unistrut. Four stainless steel bolts, washers and channelnuts are included with each Tornado enclosure (shown shaded below). For Pipe mounting,order four of either of the Tempest stainless steel mounting kits shown here.4900.MCT Stainless Steel pipe clamp kit, for pipes 1.5” (38mm) to2” (50mm) OD. Four required per enclosure.4925.MCT Stainless Steel pipe clamp kit, for pipes 2” (50mm) to2.5”/64mm OD. Four required per enclosure.Tempest Lighting, Inc. accepts no responsibility whatsoever for damages arising fromdeficient mounting design or installation by others.SecurityFinishClimate ControlCoolingHeatingProtectionControl WiringElectrical ConnectionsOrientation6 Heavy-Duty stainless steel key draw latches, 3 with secondary catch. Stainless steeleyebolt for safety bond. Order Marine Latch Option 2000.ML for bolt-down marinegrade latches.Exterior grade UV-resistant enamel coating, white or gray as standard. Custom colorsavailable to special order. All RAL colors and most Pantone colors can be matched asrequired.Patented Digital Enclosure Control (DEC3) System, microprocessor controller and displaycontrols temperature, humidity and dewpoint. DEC3 system runs 24/7 for roundthe-clockprotection.Factory default settings may be used without any adjustment, or user may modify temperatureand humidity threshold settings to optimize performance in different climatetypes and with different equipment.All values and status information are available for remote monitoring over RDM (formore information, please refer to DEC3 data sheet).Filtered fresh air cooled using six powerful AC fans.Washable air inlet filters may be simply removed for periodic cleaning.Proportionally controlled 1500 watt heater dries intake air and maintains internal temperaturewithin bounds in cold climates. Heaters pulse when fixture lamp is detected tobe off, to maintain internal temperatures above dewpoint and prevent condensation.Fixture over-temperature double pole relay isolates fixture if temperature exceeds safeoperating limit. This relay may also be controlled over DMX, providing a simple ‘hardreset’ in the event of fixture malfunction.DMX IN terminal on main circuit board. Two DMX THRU terminals - one for internal fixture,and one to next enclosure. Cable by others.Connections landed through conduit entry port provided on enclosure base.Enclosure – hardwired on site, 200-240VAC, 50/60Hz, 5amps (max)Light Fixture: Americas: NEMA L6-20 receptacle providedAsia/Europe: CE17 16amp receptacle providedTornado 2400 may be installed base down or base up - specify when ordering.

Digital Enclosure ControlDEC3.2 TM – that’s Digital Enclosure Control, 3rd Generation –takes enclosure control to the next level. DEC3.2 is a an entirelynew controller, featuring high-reliability surface-mount electronics,extreme heavy-duty switching components, and a handywaterproof user control panel on the outside of the enclosure.DEC3.2 offers communication via DMX and RDM, or may be usedin its entirely automatic standalone operating mode. DEC3.2monitors internal temperature, humidity and lamp current at alltimes, and uses this information to control its lamp relay, fansand heaters, and report back over RDM if desired.DEC3.2 works right out of the box – if you don’t want to playwith its default settings, you don’t need to. DEC3.2’s missionis to maintain temperature and humidity inside the enclosurewithin the ‘Goldilocks’ band – never to hot, never too cold, andnever, never, allowing deadly condensation to form. Condensationis fatal to electronic equipment, particularly in pollutedareas or saline environments, where condensation brings notonly rust and short-circuits, but also a steady buildup of mineraland salt deposits. Incidentally, this is very hard to control withair-conditioning type systems, which is why we don’t use them.DEC3.2’s function depends on whether the fixture/projectorlamp is on or off:Lamp ONWhen the projector/fixture is running, the heat from the lamptakes care of humidity, and DEC3.2 runs the enclosure’s fans tochange its air every few seconds – ensuring minimal temperaturerise above outside ambient.Lamp OFFWhen the lamp is off, DEC3.2 goes to work. When conditions arewithin normal bounds, DEC 3 pulses the heater at a low level toprevent condensation, and gently changes the enclosure air every30 seconds or so. We call this ‘pulse mode’, and it is the keyto preventing damaging condensation inside your equipment.If the temperature rises above the top set limit, DEC3.2 runsthe fans to cool it down. In cold conditions, DEC3.2 will run theheater as required to maintain the bottom set temperature.DEC3.2’s user interface usescapsense TM technology for awatertight control panel that’seasy to use and easy to read.LED indicators show the statusof all major functions, and thedisplay shows DMX address,temperature, humidity andany error messages you needto know about.And while doing all of this, DEC3.2 can tell you what’s happeningover your RDM network – a real boon in larger installations.Operating ModesUse the simple menus tooptimize temperature andhumidity settings, set DMXaddress, view and reset lamphour counter, and more.And if you need to step backfrom the Tornado enclosure,all of this is available overRDM, in your control room, orover the internet.Standalone: The enclosure operates independently, and automatically,requiring no user intervention. User may set parameterssuch as temperature and humidity thresholds, and monitorsensor information and DEC status at the DEC3.2 user interface.Standalone is the default DEC3.2 setup mode unless specifiedotherwise.DMX: All of the Standalone features, but the user can overridethe lamp relay over DMX, to force a hard reset of any movinglight that loses its mind!RDM: As above, plus the ability to discover and monitor DEC3.2over RDM.DEC is why, again and again, users around the world have chosenTempest enclosures to protect their investment in Lightingand projection equipment.Tempest Lighting and DEC3.2 – A combination that keeps youlooking good, and saves you money.

Ordering InformationThe following information must be provided with each order:• Luminaire type, model number and lamp power• Orientation (base-down, base-up, or other angle)• Custom Colors – provide RAL or Pantone reference• .US style (NEMA 6-20 receptacle) or .INternational (CE17 16amp (blue) receptacle)2400.IN Tornado 2400 Enclosure, 230VAC, CE17 Receptacle2400.US Tornado 2400 Enclosure, 208-240VAC, NEMA L6-20 Receptacle0000.RD RDM Functionality – optional – order one for each enclosure0000.CC Custom Color - specify RAL or Pantone or provide chip to match4900.MM M12 Stainless Steel Unistrut Bolt Kit - 4 required per enclosure4900.MC Truss/Pipe Clamp Kit - 4 required per enclosureDimensions & WeightsWeight: 105 lb/48kGShipping Weights/Dims.(Crated)48”x48”x69” (h), weight 260lb - 122 x 122 x 175cm, 118kgSchedule B Export Code: 8536.30.0000ApprovalsETL and cETL listed to UL Standard 50, 508CE: EN55015, EN61000-3-4, EN61000-3-5, EN61000-4-2, EN61000-4-3, EN61000-4-4,EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11, EN60598-1NEMA Type 3R Enclosure (approximately equivalent to IP54)This product is protected by US Patent Number 6,352,358.©Tempest Lighting, Inc., November, 2011.In the interest of continuous product improvement,specifications are subject to change without noticeTempest Lighting, Inc.,13110 Saticoy Street, Unit C, North Hollywood, CA 91605, USAwww.tempestlighting.com info@tempestlighting.comt: +1 818 787 8984f: +1 818 982 5582

Twister Enclosures for Compact MoversTwister 1800 and1900 enclosures aredesigned to protectthe new generation ofultra compact movinghead luminaires foruse outdoors.With globes madefrom clear, UV-resistantacrylic, and basesof painted aluminumand stainless steel,Twister is corrosionresistantfor a longlife in harsh conditions.Part Number Description 1800.IN Twister 1800, 40cm globe, 230V1800.US Twister 1800, 16” globe, 120V1900.IN1900.USTwister1800Twister1900DTwister 1800, 60cm globe, 230VTwister 1800, 60cm globe, 120VCBDiameter Height Max Light A Max Light B Max Light C Max W16”400mm24”600mm22”560mm30”760mmH14”356mm22”254mm10”254mm16”406mm10”254mm16”406mmA200300Twister is a simple, forcecooledmoving light enclosurefor today’s ultra-compactLED moving head fixtures,designed for long life and extremelylow operating costs.Twister features a single smallAC fan to keep the air movingwhen the fixture is on,and which may be poweredintermittently 24/7 to preventbuildup of high temperaturesinside the globe in hot weatherand reduce the risk of condensation.The fan may be wired in thesame circuit as the light fixture,or separately, for use inshow control and other similarapplications. In this mode thefan may be powered for a coupleof minutes every half-houror so, to help prevent condensationbuildup – the real killerof outdoor equipment.Twister’s innovative cowls enablethe same enclosure to bemounted base down, base upor horizontally, with the samecowls providing air filteringand rain ingress protection -just crop off the outer chambersfor base-down and horizontaluse.Remove outervent chambersfor base downand horizontalmountingNovember, 2011. In the interest of continuous product improvement, specifications are subject to change without notice

Introducing: The TopLight Plus SpaceBag "All in One"Higher Output "Space" Type light is now available.The New TopLight Plus SpaceBag is an “All in One” unit that combines the AwardWinning* TopLight fixture, updated and coupled with an amazing “SpaceBag” systemwith self-contained skirts.Powered by six Par 64 globes, an enormous amount of light is projected from the sidesand bottom of the bag uniformly in a "Space/Lantern Type" pattern. This is accomplishedwith a trapezoidal "Flat Topped Pyramid" internal baffle (Patent Pending) that allowslight to be reflected out of the sides and transmitted through the bottom of the poly-silkSpaceBag.Several times the output of traditional (double-ended globe type) Space lights is achievedand easily controlled with the "built-in" skirt system. Four skirts are rolled into pocketsalong the Gentex® shell allowing a full "Space" type light pattern. These skirts can berolled down individually to contain any side of the rectangular silk or can all be pulleddown to fully skirt all sides of the Toplight.The resulting light is softer, more powerful and more deeply projected than traditional"Space" type lights.Compared with conventional “Space” type lights, TopLight provides softer, morepowerful and deeply projected light with fewer lights, resulting in better performanceand tremendous savings in cable, dimmers, and time!TopLight’s rectangular shape and unique internal baffle allows for precision blending ofmultiple sources and north/south/east/west control of the output.Ideal for many Green Screen, Sky Light on Stage, and other Large Area applications.*TopLight is recognized by the Academy of Television Arts & Sciences for “OutstandingAchievement in Engineering Development.”Features:• Powerful• Lightweight• Softer• More Control• Deeper Projection• Quick Hang• Replaces MultipleSpace Lights/Coops• StackableSpecifications:Lamps: 6 x PAR 64; MFL recommendedCircuits: 6Voltage: 120/220 VAC (lamp-dependent)Power: 6 kW; 1kW max per lamp.Weight incl. lamps: 44.5 lbs. (20.2 kg)Dimensions w/SpaceBag (HxWxL): 43” x 36” x 56”(109 x 91.5 x 142 cm)Connector: Socapex/HartingU.S. Patents 6,106,125 6,588,912 B1 6,719,434B1Other U.S. & Foreign Patents Pending• Long Lamp Life• Socapex/HartingLITTOPLIGHTA4-050913

Console StandsThe Go-Anywhere, All-Purpose Standsfor Sound and Lighting Consoles• A real time-saver and back-saver.• More stable, improved design.• Can safely tilt and supportconsoles up to 1,760 lbs.• Heavy-duty, lightweightaluminium construction.• Easy to carry, collapsible design.Fitted black skirt kitavailable separatelySpecificationsCapacity 1,760 lbs 800 kgWeight 29 lbs 13 kgHeight 28.5” 724 mmLength 48.875” 1,241 mmWidth 36” 914 mmLITEZTILTA4-030812

Application GuideThe Grapple allows you to make inline 90 degree connections between similartrusses anywhere along a perpendicular primary truss. The load capacity of theinline truss will carry 75 percent of the manufacturer’s load rating. The primarytruss must have point load calculations taken into consideration. The secondarytrusses must be supported at both ends. Cantilevering of truss is not recommended.See over for safety warning, otherapplications and approved accessories.

Application GuideCASTER PLATE ATTACHMENTRequires caster plate accessoryNow you can temporarily attach wheelsto your box trusses, easily removingthem for applications that require clearaccessibility on all four sides.FOLLOW SPOT YOKE MOUNTRequires spot yoke accessoryProvides an economical, secure way toattach a follow spot to your truss. Spigotaccepts most medium sized spotlightyokes.CABLE CRADLE ATTACHMENTRequires cable cradle accessoryKeeps cable out of the way of riggers,technicians and spot operators.Conveniently organize cable to preventtanglingFOLLOW SPOT SEAT MOUNTRequires spot seat accessoryProvides an economical, secure way toattach a follow spot operator seat toyour truss. Includes seat belt.MOTOR POINT ATTACHMENTRequires motor point accessoryThe motor point attachment allows achain hoist to be attached directly tothe truss with no additional hardware.Will support a 1 ton (2,000 pound) load.Available for medium-duty, heavy-duty,and PRT truss only.TRUSS ACCESS LADDERRequires truss ladder accessoryFinally there is an easier and safer wayto access your rig. Now you can simplyclimb up a wire rope ladder onto thegrapple ladder and safely step onto thetop of the truss. Will safely support a 200pound worker with a 200 pound workeranchoring the rope ladder at the floor.OUTRIGGER ATTACHMENTRequires post/outrigger accessoryThe post/outrigger unit in a horizontalposition will support lights, cable,traveler tracks etc. Will support a load,perpendicular to the truss, at a distancebeyond the truss face. Load weight notto exceed 6900 pound-inches, e.g. 300pounds at 23 inches from truss face.SIDE POST ATTACHMENTRequires post/outrigger accessoryThe post/outrigger assembly providessecure vertical support. It can be usedfor fixture mounting or as support fora handrail system on catwalks and spotbridges. Capable of supporting a handrailload of 200 pounds at a standardhandrail height of 42 inches above thetruss face. Spacing between verticalmembers must not exceed 12 foot 6inches if used for handrail.WARNING!Grapples must be installed by qualified rigging personnel only. Incorrect useof Grapples may cause hazardous conditions and possible injury. Only useGrapples for applications and loadings described in TMB’s Grapple ApplicationGuide. A qualified engineer must approve all other applications.Use TMB Grapple accessories only.LITGRAPPLEA4-040612

2” Slim Half Coupler2” Half Coupler2” Swivel Coupler2” Half Couplerwith 1 1/8” Spigot2” Half Couplerwith Eye Ring2” Snap CouplerProBurger couplers are constructed from a certified high tensile-strength 6061T6 aluminium extrusion. They attach securely to tubes and combine strength anddurability with a high degree of safety. Select models TUV certified.ProBurger provides entertainment industry users with a great deal of flexibility increating attachments to meet their individual requirements.

4.8"122mm34.8"122mm87368725.24”133mm625.24”133mm14FOR TUBE 2"S.W.L. 500KGs51.97"50mm4511.18"30mmPRBHCM10PRBHCM10BPRBHC1/2PRBHC1/2B2” Half Couplers3/8” Mounting BoltNatural Finish3/8” Mounting BoltBlack Anodized Finish1/2” Mounting BoltNatural Finish1/2” Mounting BoltBlack Anodized Finish500 KgS.W.L.500 KgS.W.L.500 KgS.W.L.500 KgS.W.L.Part Description Quantity Dimension1 Base Plate 12 Moving Plate 13 Eye Bolt 1 1/2”-124 Carriage Bolt 1 3/8”-164 Alt. Carriage Bolt 1/2” ver. 1 1/2”-135 Hex Locking Nut 1 3/8”-165 Alt. Hex Locking Nut 1/2” ver. 1 1/2”-136 Wing Nut 1 1/2”-127 Washer 1 1/2”8 Spring Pin 2 10X45mmPRBHCSL2” Slim Half Couplers3/8” Mounting BoltNatural Finish300 KgS.W.L.Part Description Quantity Dimension1 Base Plate 12 Moving Plate 13 Eye Bolt 1 1/2”-124 Carriage Bolt 1 3/8”-165 Hex Locking Nut 1 3/8”-166 Wing Nut 1 1/2”-127 Washer 1 1/2”8 Spring Pin 2 10X26mm5.9"149mm7 651.97"50mm64.8"123mm31.57"40mm84278.15"207 mm18426.65"169mm9PRBSCPRBSCB2” Swivel CouplersSwivel CouplerNatural FinishSwivel CouplerBlack Anodized Finish3500 KgS.W.L.500 KgS.W.L.Includes roll pin forfixing at 90° angle.0.04"1mm1.97"50mmØ 0.24"6mm +0.6+0.3Part Description Quantity Dimension1 Base Plate 1 12 Base Plate 2 13 Moving Plate 24 Pin 15 Eye Bolt 2 1/2”-126 Wing Nut 2 1/2”-127 Washer 2 1/2”8 Spring Pin 4 10X45mm9 Spring Pin 2 6X50mmPRBSNC1/2PRBSNC1/2B12” Snap Couplers1/2” Mounting BoltNatural Finish1/2” Mounting BoltBlack Anodized Finish4.8"122mm5200 KgS.W.L.200 KgS.W.L.Part Description Quantity Dimension1 Base Plate 12 Moving Plate 13 Eye Bolt 1 1/2”-124 Screw 1 1/2”-13 x 1.5”5 Hex Locking Nut 1 1/2”-136 Wing Nut 1 1/2”-127 Washer 2 1/2”8 Spring Pin 2 10X35mm31.97"50mm74.8"122mm31.97"50mm1.34”34mm1.62”41.15mm868 76M12Ø0.87”22mm0.31”8mm26.5”165mm4Ø1.18”30mm0.08”2mm5122.36”60mmØ0.94”24mmM120.87”22mmØ1.18”30mmØ1.97”50mm9.45"240mm5.35"136mm4Ø 0.28"7mm51PRBERC2” Half Coupler with Eye RingM12 Eye RingNatural Finish340 KgS.W.L.Part Description Quantity Dimension1 Base Plate 12 Moving Plate 13 Eye Bolt 1 1/2”-124Hexagon socketcountersunk flat 1head cap screw5 Hoisting Ring Nut 1 M126 Wing Nut 1 1/2”-127 Washer 1 1/2”8 Spring Pin 2 10X45mmPRBSPC2” Half Couplerwith Spigot1 1/8” SpigotNatural Finish500 Kg S.W.L.Ø 1.1"28mmPart Description Quantity Dimension1 Base Plate 12 Moving Plate 13 Eye Bolt 1 1/2”-124Hexagon socket countersunkflat head cap screw15 Spigot 16 Wing Nut 1 1/2”-127 Washer 1 1/2”8 Spring Pin 2 10X45mmLITPROBURGERA4-082213

2” Lightweight Adjustable CouplerNEW!Black Anodized VersionAlso AvailableThe ProBurger PRBAC LightweightAdjustable Coupler can be instantly fixedat any 45 degree interval without a roll pin.Constructed from certified high tensilestrength6061 T6 aluminium.194 Kg S.W.LProBurger provides entertainment industryusers with a great deal of flexibilityin creating attachments to meet theirindividual requirements.Angle can be re-set with one bolt.LITPRBACA4-010814

Truss Protector• Protects truss from C-clamps,stacking, shipping.• Raised grips make it easy toremove and replace.• Made of nearly indestructablePVC polymer.• Black colour is moulded in,will not scratch or flake off.• Fits all 2” tube trusses.LITPROCLIPA4-081613

3-Section Wind-Up Standw/Auto Self-Locking Device• Chrome plated steel stand w/geared column• Versatile top head accepts 1 1/8” spigot(included), also has a pop-up 5/8” ‘baby’male spigot• Three-section column diameter:2.17 in. (55 mm), 1.77 in. (45 mm),1.5 in. (38 mm)• Two risers extend simultaneously at1.75 in. (4.4 cm) per handle turn• Safety cable ensures simultaneousretrieval of all sections• Leg diameter: 1.18 in. (30 mm)• Includes one leveling leg• Optional casters available or willfit other brands of castersFEATURESAuto Self-Locking device:NEW DESIGN!Self-Locking deviceprevents accidentaldrop-off for addedsafety.Lock position.The safety pin willautomatically engageholes in the tubewhile winding up.Unlock position.An internal springbrings the safetypin back.Leveling leg for use oneneven terrain.Brake tension adjustablevia hex key.Closed LengthMax. HeightBase DiameterMax. LiftCapacitySelf WeightSPECIFICATIONS71.25 in.(181 cm)149.6 in.(380 cm)50.4 in(128 cm)66.1 lbs.(30 kg)49.4 lbs.(22.4 kg)Built-in footstep.Pop-up 5/8”“baby” SpigotSpigot included forfixture mountingLITPROSTANDA4-080913

PROFESSIONALFIXTURE ACCESSORIES10% of all ProXS sales worldwideare donated to Behind The ScenesAwesome fixture accessoriesfor an awesome cause!An ESTA Foundation charity

Top Hats• Cold-rolled steel construction with glare-reducing flameretardantflocked finish standard on internal surfacesPart No. To Fit Fixture Frame Size Aperture Diameter Snoot LengthPRX6TH5 S4, SL, Shakespeare, Selecon 6.25” x 6.25” 5” 5”PRX6TH3 S4, SL, Shakespeare, Selecon 6.25” x 6.25” 5” 3”PRX7TH6 6” Leko, 6” Theatre Fresnel, 360Q 7.5” x 7.5” 6” 6”PRX7TH6S S4 Zoom, S4 PAR, PARNel 7.5” x 7.5” 6.75” 6”PRX7TH3 6” Leko, 6” Theatre Fresnel, 360Q 7.5” x 7.5” 6” 3”PRX7TH3S S4 Zoom, S4 PAR, PARNel 7.5” x 7.5” 6.75” 3”PRX10TH8 PAR64, 8” Theatre Fresnel 10” x 10” 8” 8”PRX10TH3 PAR64, 8” Theatre Fresnel 10” x 10” 8” 3”PRX12TH10 S4 10°, SL 10° 12” x 12” 10” 10”PRX14TH12 S4 5° 14” x 14” 12” 12”Half Hats• Cold-rolled steel construction with glare-reducing flameretardantflocked finish standard on internal surfacesPart No. To Fit Fixture Frame Size Aperture Diameter Snoot LengthPRX6HH5 S4, SL, Shakespeare, Selecon 6.25” x 6.25” 5” 5”PRX6HH3 S4, SL, Shakespeare, Selecon 6.25” x 6.25” 5” 3”PRX7HH6 6” Leko, 6” Theatre Fresnel, 360Q 7.5” x 7.5” 6” 6”PRX7HH6S S4 Zoom, S4 PAR, PARNel 7.5” x 7.5” 6.75” 6”PRX10HH8 PAR64, 8” Theatre Fresnel 10” x 10” 8” 8”PRX12HH10 S4 10°, SL 10° 12” x 12” 10” 10”PRX14HH12 S4 5° 14” x 14” 12” 12”Colour Extenders• Cold-rolled steel construction• Helps prevent gel burnout• Tough powdercoated black finishPart No. To Fit Fixture Frame Size Aperture Diameter Snoot LengthPRX6CX5 S4, SL, Shakespeare, Selecon 6.25” x 6.25” 5” 5”PRX6CX3 S4, SL, Shakespeare, Selecon 6.25” x 6.25” 5” 3”PRX7CX6PRX7CX3S4 Zoom, S4 PAR, PARNel, 6” Leko,6” Theatre Fresnel, 360QS4 Zoom, S4 PAR, PARNel, 6” Leko,6” Theatre Fresnel, 360Q7.5” x 7.5” 6.75” 6”7.5” x 7.5” 6.75” 3”PRX10CX5 PAR64, 8” Theatre Fresnel 10” x 10” 8” 5”4-Way Barndoors• Full size aperture does not limit light output of fixture• Available with or without built in 2” colour extenderPart No. To Fit Fixture Frame Size Snoot LengthPRX7BDR S4 PAR, PARNel, 6” Theatre Fresnel - No Colour Extender 7.5” x 7.5” 0”PRX7BDRES4 PAR, PARNel, 6” Theatre Fresnel - With ColourExtender7.5” x 7.5” 2”PRX9.5BDR PAR64 - No Colour Extender 9.5” x 9.5” 0”

Donuts• Cold-rolled steel construction• Tough powdercoated black finishPart No. To Fit Fixture Frame Size Aperture DiameterPRX6DN S4, SL, Shakespeare, Selecon 6.25” x 6.25” 3”PRX7DN 6” Leko, 6” Theatre Fresnel, 360Q 7.5” x 7.5” 3”PRX12DN S4 10°, SL 10° 12” x 12” 6”PRX14DN S4 5° 14” x 14” 7”Colour Frames• Cold-rolled steel construction• Tough powdercoated black finishPart No. To Fit Fixture Frame Size Aperture DiameterPRX6CF S4, SL, Shakespeare, Selecon 6.25” x 6.25” 5”PRX7CF 6” Leko, 6” Theatre Fresnel, 360Q 7.5” x 7.5” 6”PRX7CFS S4 Zoom, S4 PAR, PARNel 7.5” x 7.5” 6.75”PRX10CF PAR64, 8” Theatre Fresnel 10” x 10” 8”PRX12CF S4 10°, SL 10° 12” x 12” 10”PRX14CF S4 5° 14” x 14” 12”Pattern Holders• Traditional aluminium sandwich-style design• Includes insulated pull handlePart No. To Fit Fixture Pattern SizePRXPHA S4 APRXPHB S4 BPRXPHG S4 86mm GlassPRXPHM S4 Junior MPRXPHMG S4 Junior 86mm GlassDrop-in Irises• Fits ETC Source Four® or Jr. iris slot• Leaves have 600° temperature ratingPart No. To Fit Fixture No. of LeavesPRXIRISS4 S4 18PRXIRISS424 S4 24PRXIRISS4JR S4 Junior 18Beam Bender• Great for concealing fixtures or for dance lighting• Adjustable mirror angle for precise beam controlPart No. To Fit Fixture Frame SizePRX6BB S4, SL, Shakespeare, Selecon Fixtures with 6.25” square mounting frames 6.25” x 6.25”

Concentric RingLouvre• Low profile spill control for the Source Four® PAR and PARNel.• Cold-rolled steel construction.• As effective as a 6” snoot.• Tough powdercoated black finish.Part No. To Fit Fixture Frame Size Aperture Diameter Snoot LengthPRX7CR S4 PAR, PARNel 7.5” x 7.5” 6.75” 2”Egg Crate Louvre• Spill control with the lowest profile• Cold-rolled steel construction• 1/2” louver grid provides full 45° cutoff• Tough powdercoated black finishPart No. To Fit Fixture Frame Size Aperture Diameter Snoot LengthPRX7EC S4 PAR, PARNel 7.5” x 7.5” 6.75” 0.5”TVMP Adapter• Converts theatrical lighting instruments to interface with studio grip equipment• Machined steel construction with chrome-plated finishPart No.PRXTVMPTo Fit FixtureAny with 1/2” hole in yokeOmega MovingLight Bracket• Quickly mount/unmount clamps from fixtures• Extruded aluminium construction• Hardened steel fasteners• Natural finishPart No.PRXOMBRSTo Fit FixtureMartin and other moving lights with 4.15”/105.5mm attachment spacingLITPROXSA4-090613