Installation instructions for d-can for gt1 and inpa Installation 1 ...
Installation instructions for d-can for gt1 and inpa Installation 1 ... Installation instructions for d-can for gt1 and inpa Installation 1 ...
Installation instructions for d-can for gt1 and inpaInstallation1. Install diaghead.exe 2. Vmware-player-2.5.0-118166_pconline3. Copy inpa all file to c:\.4. Copy gt1 software to c:\. And unzip it.5. Edit system path, add path(syspath.jpg)6. Connect usb cable and instal ftdi drivers.7. Install d-can usb device(usb2.0 ftdi driver.rar)8. Record your com port number (number.jpg) 9. Setup "latensy timer = 1" (l_timer.jpg)10. Set c:\ediabas\hardware\obd\obd.ini port=comx (your usb-com number)port11. Run c:\ediabas\hardware\obd\obdsetup.exe12. Restart windows13. Change main network adapter ip to 192.168.68.1,please don’t change vmwarenetwork adapter ip14. Change to c:\ediabas\bin\ediabas.ini port= 6801, if needed.OperationsInpaRun c:\inpa\bin\inpa.exeGt1 (need set network ip address ) Run c:\ediabas\bin\ifhsrv32.exe Run diaghead.exe Select diaghead menu Run vwware Open c:\gt1\dis 55 english\dis 55 english.vmdk Click button(in gt1 software main screen) Click button Click button Click ->-- buttion (to back to main screen)To work correctly with the device, in vmplayer set ethernet1, ethernet2, ethernet3 to"connected", "bridged". Master pc network settings must be the following:- Ip 192.168.68.1- Subnet mask 255.255.255.0- Gateway 192.168.68.1-
<strong>Installation</strong> <strong>instructions</strong> <strong>for</strong> d-<strong>can</strong> <strong>for</strong> <strong>gt1</strong> <strong>and</strong> <strong>inpa</strong><strong>Installation</strong>1. Install diaghead.exe 2. Vmware-player-2.5.0-118166_pconline3. Copy <strong>inpa</strong> all file to c:\.4. Copy <strong>gt1</strong> software to c:\. And unzip it.5. Edit system path, add path(syspath.jpg)6. Connect usb cable <strong>and</strong> instal ftdi drivers.7. Install d-<strong>can</strong> usb device(usb2.0 ftdi driver.rar)8. Record your com port number (number.jpg) 9. Setup "latensy timer = 1" (l_timer.jpg)10. Set c:\ediabas\hardware\obd\obd.ini port=comx (your usb-com number)port11. Run c:\ediabas\hardware\obd\obdsetup.exe12. Restart windows13. Change main network adapter ip to 192.168.68.1,please don’t change vmwarenetwork adapter ip14. Change to c:\ediabas\bin\ediabas.ini port= 6801, if needed.OperationsInpaRun c:\<strong>inpa</strong>\bin\<strong>inpa</strong>.exeGt1 (need set network ip address ) Run c:\ediabas\bin\ifhsrv32.exe Run diaghead.exe Select diaghead menu Run vwware Open c:\<strong>gt1</strong>\dis 55 english\dis 55 english.vmdk Click button(in <strong>gt1</strong> software main screen) Click button Click button Click ->-- buttion (to back to main screen)To work correctly with the device, in vmplayer set ethernet1, ethernet2, ethernet3 to"connected", "bridged". Master pc network settings must be the following:- Ip 192.168.68.1- Subnet mask 255.255.255.0- Gateway 192.168.68.1-
Notes: If notebook not connect network cables, please insert loopback cables, If you insert look back cables, maybe not <strong>can</strong> activati, you need re-activate thenetwork adapter or reset pc Please don’t change ethernet2, ethernet3 ip address You need close your firewall software, if you not close firewall , <strong>gt1</strong> will not <strong>can</strong>connect you d-<strong>can</strong> interface Don't use usb extender cable, directly connect interface to computer.
Change language