acknowledgements for ansi/nist-itl 1-2011 - NIST Visual Image ...

ANSI/NIST-ITL 1-2011 - UPDATE 2013 DRAFT VERSION8.19.16 Field 19.018: Amputated or bandaged / AMPThis optional field shall specify if a foot is amputated or bandaged. Multiple subfields maybe entered and each shall contain two information items.• The first item is the friction ridge amputated or bandaged position / FRAP. Itshall have a value of 61 or 62 or between 64 and 79 as chosen from Table 8. Thisinformation item is called the friction ridge amputated or bandaged position /FRAP to differentiate it from FGP.• The second item is the amputated or bandaged code / ABC, also known as theAMPCD. Table 85 is a list of allowable indicators for the AMPCD.If an entire foot is missing, either 61 (sole and toes – right foot) or 62 (sole and toes – leftfoot) shall be entered for FRAP. A partially scarred foot should be printed. XX shall beused only when a partial print exists due to amputation; therefore it contains some frictionridge detail. UP shall be used with the complete block where an image was to be transmitted,but there is no image due to amputation or total lack of friction ridge detail (such as with abandage). An image with a scar should not be marked XX or UP.8.19.17 Field 19.019: Friction ridge - toe segment position(s) / FSPThis is an optional field. It describes the locations for each of the image segments of up tofive individual toes within a flat image. This field shall consist of up to five repeatingsubfields, one for each segment. There need not be more than one subfield present.Additional toes (beyond five per foot) shall be grouped together with either the big toe or thelittle toe, depending upon the side of the foot upon which they appear.The first information item is called the friction ridge segment position / FRSP todifferentiate it from FGP.8.19.18 Field 19.020: Comment / COMThis is an optional field. See Section 7.4.4 for details.8.19.19 Field 19.024: Friction ridge - plantar print quality metric / FQMThis optional field is used to specify one or more different metrics of plantar print imagequality score data for the image stored in this record. Each subfield is comprised of fourinformation items. The first information shall be the friction ridge metric position /FRMP for the image stored in this record. Valid codes range from 60 to 79. See Table 8.See Section 7.7.7 for a description of the remaining three information items.8.19.20 Field 19.030: Device monitoring mode / DMMThis is an optional field. See Section 7.7.1.3 for details.[2013n>]392