acknowledgements for ansi/nist-itl 1-2011 - NIST Visual Image ...

ANSI/NIST-ITL 1-2011 - UPDATE 2013 DRAFT VERSION• The third information item is mandatory and is the profile ID / PRF. It is acharacter string with a unique party identification. This information item is usedto uniquely identify the profile or sample for which the transaction is based. It is amaximum of 64 Unicode characters.• The optional fourth information item is a supplemental message / SUP. Thisinformation item states if this transaction is a supplemental message to a previoustransmission. It is up to 100 Unicode characters.• The optional fifth information item is a DNA profile comment / DPC. It is up to100 Unicode characters.8.18.16 Field 18.016: Autosomal STR, X-STR and Y-STR / STRThis optional field may be comprised of as many subfields as there are combinations ofdata type and locus type reported. This field is only present if Field 18.011: Sampletyping information / STI has a subfield with the value 0.• The first information item is mandatory. It is the DNA STR type / DST. It hasone of the following numeric values:0= Autosomal STR Profile1= X-STR Profile2= Y-STR Profile• The second information item is mandatory. It is the DNA locus reference / DLR.The current valid loci for Autosomal, Y and X-STRs are maintained by NIST andare available at http://www.nist.gov/itl/iad/ig/ansi_standard.cfm. This informationitem is an integer entry with up to 3 characters per locus.• The third information item, allele indicator / ALL, is mandatory. It is a numericentry containing a zero if no allele is found. Otherwise it is filled with a 1.• The fourth information item is mandatory. It is the locus analysis indicator /LAI. It is a numeric entry, containing a zero if not analyzed. Otherwise itcontains a 1.• The fifth information item is mandatory. It is the precise call determination /PCDT. It is a numeric entry containing a zero if the precise call cannot bedetermined, due to an uncertainty in the call. Otherwise it contains a 1.• The sixth information item shall have a value if ALL is 1. It shall be empty ifALL is 0. It is the allele call 1 / AL1. This is the allele call for the locus referenceas indicated by the value of DLR. It contains up to 4 characters, such as “11” orMay, 2013 DRAFT VERSION UPDATE 2013 Page 377