acknowledgements for ansi/nist-itl 1-2011 - NIST Visual Image ...

More documents

Recommendations

Info

ANSI/NIST-ITL 1-2011 - UPDATE 2013 DRAFT VERSIONand 13.015 shall be used. See Section 7.7.4.2 and Table 8 for details.8.13.14 Field 13.014: Search position descriptors / SPDThis field shall be present if and only if the finger position code “19” appears in Field13.013: Friction ridge generalized position / FGP.• The first information item is the probable decimal finger position code / PDFtaken from Table 8, with integers 0 through 10, 16 or 17 allowed.• The second information item is finger image code / FIC. Latent images of fulllengthfingers use codes FV1 through FV4, as described in Section 7.7.4.3. Otherallowable codes are EJI, TIP, PRX, DST and MED. See Table 9.8.13.15 Field 13.015: Print position coordinates / PPCThis field may be present if and only if the finger position code “19” appears in Field13.013: Friction ridge generalized position / FGP. It is an optional field. Individual fullfinger or segment definitions may be entered as separate subfields. See Section 7.7.4.4for details. For the case of a fingertip, the first information item shall be “TIP”, and thesecond information item shall be “NA”. The next four information items are as describedin Section 7.7.4.4.8.13.16 Field 13.016: Scanned horizontal pixel scale / SHPSThis is an optional field. See Section 7.7.8.7 for details.8.13.17 Field 13.017: Scanned vertical pixel scale / SVPSThis is an optional field. See Section 7.7.8.8 for details.[2013n>]8.13.18 Field 13.018: Ruler or scale presence in image / RSPThis optional field allows the user to state whether a ruler or other known scale ispresent in the image. The field consists of four information items.• The first information item, ruler or scale units / RSU, indicates the units ofmeasurement visible on the ruler or measurement scale:IN = inchesMM = millimetersBOTH = both inches and millimeters• The second information item, ruler or scale make / RSM, lists the maker of theruler or scale (if known).• The third information item, ruler or scale model / RSO, lists the model of theruler or scale (if known).May, 2013 DRAFT VERSION UPDATE 2013 Page 305
ANSI/NIST-ITL 1-2011 - UPDATE 2013 DRAFT VERSION• The fourth information item, standard fingerprint form number / RSF permitsentry of a standard fingerprint form number such as FD-249, FD-258 or C-216C. If RSF is specified, none of the other three information items (RSU,RSM or RSO) shall be specified. Conversely, if any of those three informationitems is present, RSF shall not appear in this field.8.13.19 Field 13.019: Resolution method / REMThis optional field states the method used for determining the pixel density of theimage. The field consists of eight information items. The second through the seventhinformation items are mandatory if MDR = RULER and are optional if MDR = FORM.They shall not be used for other values of MDR. When the known scale coordinatesare used, the resolution can be calculated as (the distance in pixels between points A andB) divided by KSL. The pixel counts used in SXA, SYA, SXB, SYB are zero-based.The top left pixel has coordinates (0,0).If the transmitted pixel density of an image in Field 13.009: Transmitted horizontalpixel scale / THPS and Field 13.010: Transmitted vertical pixel scale / TVPS differsfrom the scanned (original) pixel density stated in Field 13.016: Scanned horizontalpixel scale / SHPS and Field 13.017: Scanned vertical pixel scale / SVPS, then thevalues in this field are with respect to the scanned pixel density and shall not berecalculated to correspond to the transmitted pixel density.• The first information item, means of determining resolution / MDR,specifies whether the rsolution is calculated (from a ruler or known scale)estimated (by a human or computer), or is from a known source (such as aflatbed scanner or standard form. Enter the CODE from Table 83 Means ofdetermining resolution.• The second information item, known scale units / KSL, specifies the lengthof the known scale from point A to point B. The allowed special character isthe period.• The third information item, known scale units / KSU indicates whether theknown scales units are in inches or millimeters.IN = inchesMM = millimeters• The fourth information item, known scale x coordinate for point A / SXA isexpressed in number of pixels from the left of the image.• The fifth information item, known scale y coordinate for point A / SYA isexpressed in number of pixels from the left of the image.• The sixth information item, known scale x coordinate for point B / SXB isexpressed in number of pixels from the left of the image.• The seventh information item, known scale y coordinate for point B / SYBis expressed in number of pixels from the left of the image.• The eighth information item, comment / COM, is a UNICODE textcomment or description provided by the examiner about the resolution306
Page 1:
NIST Special Publication 500-xxxANS
Page 5 and 6:
5.3.18 Type-18 records ............
Page 7 and 8:
8.1.4 Field 1.004 Type of transacti
Page 9 and 10:
8.9.7.18 Field 9.322: EFS core delt
Page 11 and 12:
8.11 Record Type-11: Forensic and i
Page 13 and 14:
8.14.2 Field 14.002: Information de
Page 15 and 16:
8.17 Record Type-17: Iris image rec
Page 17 and 18:
8.19.24 Field 19.902: Annotation in
Page 19:
8.24.6 Field 99.101: Biometric type
Page 22 and 23:
F.6.3 Reference points.............
Page 24 and 25:
Figure 34: Palm with carpal delta a
Page 26 and 27:
Table 31 Off-center fingerprint pos
Page 28 and 29:
Table 95 DNA sample cellular types.
Page 30 and 31:
Type-11:A new record type introduce
Page 32 and 33:
ACKNOWLEDGEMENTS FOR ANSI/NIST-ITL
Page 34 and 35:
Will Graves, Rob Mungovan, Catherin
Page 36 and 37:
John ManzoFBI/BIOMETRICS Center ofE
Page 38 and 39:
General Editor: Brad Wing[2013a>]AC
Page 40 and 41:
CANVASSEES For the 2013 UpdateTO BE
Page 42 and 43:
ANSI/NIST-ITL 1-2011 - UPDATE 2013
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
Page 208 and 209:
Page 210 and 211:
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
Page 218 and 219:
Page 220 and 221:
Page 222 and 223:
Page 224 and 225:
Page 226 and 227:
Page 228 and 229:
Page 230 and 231:
Page 232 and 233:
Page 234 and 235:
Page 236 and 237:
Page 238 and 239:
Page 240 and 241:
Page 242 and 243:
Page 244 and 245:
Page 246 and 247:
Page 248 and 249:
Page 250 and 251:
Page 252 and 253:
Page 254 and 255:
Page 256 and 257:
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
Page 264 and 265:
Page 266 and 267:
Page 268 and 269:
Page 270 and 271:
Page 272 and 273:
Page 274 and 275:
Page 276 and 277:
Page 278 and 279:
Page 280 and 281:
Page 282 and 283:
Page 284 and 285:
Page 286 and 287:
Page 288 and 289:
Page 290 and 291:
Page 292 and 293:
Page 294 and 295:
Page 296 and 297: ANSI/NIST-ITL 1-2011 - UPDATE 2013
Page 396 and 397:
Page 398 and 399:
Page 400 and 401:
Page 402 and 403:
Page 404 and 405:
Page 406 and 407:
Page 408 and 409:
Page 410 and 411:
Page 412 and 413:
Page 414 and 415:
Page 416 and 417:
Page 418 and 419:
Page 420 and 421:
Page 422 and 423:
Page 424 and 425:
Page 426 and 427:
Page 428 and 429:
Page 430 and 431:
Page 432 and 433:
Page 434 and 435:
Page 436 and 437:
Page 438 and 439:
Page 440 and 441:
Page 442 and 443:
Page 444 and 445:
Page 446 and 447:
Page 448 and 449:
Page 450 and 451:
Page 452 and 453:
Page 454 and 455:
Page 456 and 457:
Page 458 and 459:
Page 460 and 461:
Page 462 and 463:
Page 464 and 465:
Page 466 and 467:
Page 468 and 469:
Page 470 and 471:
Page 472 and 473:
Page 474 and 475:
Page 476 and 477:
Page 478 and 479:
Page 480 and 481:
Page 483 and 484:
Page 485 and 486:
Page 487 and 488:
Page 489 and 490:
Page 491 and 492:
Page 493 and 494:
Page 495 and 496:
Page 497 and 498:
Page 499 and 500:
Page 501 and 502:
Page 503 and 504:
Page 505 and 506:
Page 507 and 508:
Page 509 and 510:
Page 511 and 512:
Page 513 and 514:
Page 515 and 516:
Page 517 and 518:
Page 519 and 520:
Page 521 and 522:
Page 523 and 524:
Page 525 and 526:
Page 527 and 528:
Page 529 and 530:
Page 531 and 532:
Page 533 and 534:
Page 535 and 536:
Page 537 and 538:
Page 539 and 540:
Page 541 and 542:
Page 543 and 544:
Page 545 and 546:
Page 547 and 548:
Page 549 and 550:
Page 551 and 552:
Page 553 and 554:
Page 555 and 556:
Page 557 and 558:
Page 559 and 560:
Page 561 and 562:
Page 563 and 564:
Page 565 and 566:
Page 567 and 568:
Page 569 and 570:
Page 571 and 572:
Page 573 and 574:
Page 575 and 576:
Page 577 and 578:
Page 579 and 580:
Page 581 and 582:
Page 583 and 584:
Page 585 and 586:
Page 587 and 588:
Page 589 and 590:
Page 591 and 592:
Page 593 and 594:
Page 595 and 596:
Page 597:
show all

acknowledgements for ansi/nist-itl 1-2011 - NIST Visual Image ...

Create successful ePaper yourself

Delete template?

Save as template?