acknowledgements for ansi/nist-itl 1-2011 - NIST Visual Image ...

ANSI/NIST-ITL 1-2011 - UPDATE 2013 DRAFT VERSIONooA fifth information item, algorithm product identification / QAP, ismandatory and shall specify a numeric product code assigned by the vendor ofthe quality assessment algorithm, which may be registered with the IBIA, butregistration is not required. This information item indicates which of thevendor’s algorithms was used in the calculation of the quality score. Thisinformation item contains the integer product code and should be within therange 0 to 65,534. A value of 0 indicates a vendor without a designation byIBIA. In such case, an entry shall be made in COM of this subfield describingthe algorithm and its owner/vendor.The sixth information item (comments / COM) is optional but shall be used toprovide information about the quality assessment process, including adescription of any unregistered quality assessment algorithms used. (if QAV=0x00 or QAP = 0)8.11.24 Field 11.034: Vocal collision identifier / VCIThis optional field contains 2 mandatory information items, each referring to a list ofsegments identified in either Field 11.024: Snipping diary / SPD or the segment diaryField 11.025: Segment diary / SGD and indicating that a vocal collision (two or morepersons talking at once) occurs within the segment. This field shall only appear ifField 11.024 or Field 11.026 exists in this record.ooThe first information item (diary identifier / DIA) is mandatory and is anindicator of the diary to which this subfield refers. If this item refers to asegment in the Field 11.024: Snipping diary / SPD, the value is 0. If this itemrefers to a segment in the Field 11.025: Segment diary / SGD , the value is 1.The second information item (segment identifiers / SID) is a mandatory list ofintegers and gives the segment identifiers from the diary named in the itemabove in which vocal collisions occur. There may be up to 600,000 segmentsidentified in this subfield.8.11.25 Field 11.035: Processing priority / PPYThis optional field contains repeating subfields, each referring to a list of segmentsidentified in either Field 11.024: Snipping diary / SPD or the segment diary Field11.025: Segment diary / SGD and indicating the priority with which the segmentsnamed in those diaries should be processed. If this field exists, segments not identifiedshould be given the lowest priority. The priority specified in this field does not conflictwith that of Field 1.006 Priority / PRY, which indicates the processing priority of theentire transaction.ooThe first information item (diary identifier / DIA) is mandatory and is a binaryindicator of the diary to which this subfield refers. If this item refers to asegment in Field 11.024: Snipping diary / SPD , the value is 0. If this itemrefers to a segment in Field 11.025: Segment diary / SGD, the value is 1.The second information item (segment identifiers / SID) is a mandatory list ofintegers and gives the segment identifiers from diary named in the firstMay, 2013 DRAFT VERSION UPDATE 2013 Page 259