acknowledgements for ansi/nist-itl 1-2011 - NIST Visual Image ...
acknowledgements for ansi/nist-itl 1-2011 - NIST Visual Image ... acknowledgements for ansi/nist-itl 1-2011 - NIST Visual Image ...
ANSI/NIST-ITL 1-2011 - UPDATE 2013 DRAFT VERSIONrecording. 0 indicates no snipping and 1 indicates that snipping has occurred.oThe second information item (snipping authority organization name / SPA) isan optional text field of up to 300 characters containing information about theagency that performed the snipping segmentation. Agencies undertakingsnipping activities on the original speech should log their actions by appendingto this item and noting the change of field contents in the Record Type-98:Information assurance record and/or Field 11.902: Annotationinformation / ANN of this record.oThe third information item (comments / COM) is an optional unrestricted textstring of up to 4000 characters that may contain text information about the snipactivities affecting the voice recording.8.11.19 Field 11.024: Snipping diary / SPDThis optional field allows the documentation of snips obtained from larger voicerecordings, which may themselves be included in the transaction as a Record Type-20:Source representation record .There may be up to 600,000 snips diarized in repeating subfields. Each snip shall bedominated by speech from the subject of this Type-11 record. Four items (uniquelynumbering the snips by track and giving relative start and end times of each) aremandatory in each subfield. A fifth item is optional within each subfield and allows forcomments on the identified snip. If there is no snipping (Field 11.023: Snippingsegmentation/ SNP) indicated, then all of the data in the voice recording will beconsidered as in toto. There can be at most one snipping diary for each Type-11 record.o The first information item (snip identifier / SPI) is mandatory in each subfieldand uniquely numbers the snip to which the following items in the subfield apply.There is no requirement that the snips be numbered sequentially. The SPI maycontain up to 6 digits and up to 600,000 snips may be identified. If Field 11.023indicates snipping, the voice recording must consist of at least one snip.o The second information item (tracks / TRK) is mandatory if TRC in Field11.012: Physical media object / PMOor CHC of Field 11.014: Codec / CDCis greater than one and lists all tracks or channels on the recording to which thesnip identifier applies. . No value in this list should be greater than the value ofPMO_TRC or CDC_CHC, whichever applies. For example, in the case of atwo-track stereo recording where both tracks contain a snip at the same start andend times, this list will be “1” and “2”o The third information item (relative start time / RST) is a mandatory integer forevery snip identified by an SPI and indicates in microseconds the time of thestart of the snip relative to the beginning of the voice recording. The item cancontain up to 11 digits, meaning that the RST might occur anywhere within avoice recording limited to about 28 hours. Because each snip is obtainedindependently from a larger voice recording, snips from a single track on theaudio object described in Field 11.003: Audio object descriptor code /AODshall not overlap, meaning that the RST of a snip shall not occur between theRST and RET of any other snip on the same track. If the Type-11 record refersMay, 2013 DRAFT VERSION UPDATE 2013 Page 253
ANSI/NIST-ITL 1-2011 - UPDATE 2013 DRAFT VERSIONto an analog recording, the method of determining the start time shall be given inthe comment item of this field. See Section 7.7.2.6 Time measured inmicroseconds.o The fourth information item (relative end time / RET) is a mandatory integer forevery snip identified by an SPI and indicates in microseconds the time of the endof the snip relative to the beginning of the voice recording. The item can containup to 11 digits, meaning that the snip may end anywhere within the 28 hour voicerecording. Because each snip is obtained independently from a larger voicerecording, snips from the same track of the audio object of Field 11.003: Audioobject descriptor code /AOD shall not overlap, meaning that the RET of a snipshall not occur between the RST and RET of any other snip from the same track.See Section 7.7.2.6 Time measured in microseconds.o The fifth information item (comments / COM) is an optional unrestricted textstring of up to 4000 characters in length that allows for comments of any type tobe made on a snip. This comment field could contain word or phonic leveltranscriptions, language translations or security classification markings, asspecified in exchange agreements.8.11.20 Field 11.025: Segment diary / SGDThis field contains repeating subfields that name and locate the segments within thevoice recording of this Type-11 record associated with a single speaker. A speaker'sinvolvement in a conversation may be segmented in a way independent of turn taking asthe content, speaking style and collection conditions change. Within a Type-11 record,there may be only one segment diary describing a single speaker within the single voicerecording. If additional diarizations of this voice recording are necessary -- forexample, to locate segments of speech from a second speaker in the voice recording,additional Type-11 records must be created. The identity of each speaker can be crossreferencedto biographic information contained in a Type-2 record using Field 11.992:Type-2 Record Cross Reference / T2C .Each diarized segment shall contain speech from the subject of this record, although asegment may contain speech collisions. The first four items (uniquely identifying thesegments, identifying the tracks from the audio media object of Field 11.003: Audioobject descriptor code /AOD to which the segment number applies, and giving startand end times of each relative to the absolute beginning of the voice recording) aremandatory if this field is used and shall repeat for each speech segment identified. Afifth item is optional and accommodates comments on the individual segments. Thisrecord type accommodates up to 600,000 speech segments as repeating subfields. Forvoice recordings consisting of snips, Field 11.024: Snipping diary / SPD may beincluded in the SGD as a subset and may be identical.254o The first information item (diarization authority organization name / DAU) isan optional text field of up to 300 characters containing information about theorganization that performed the diarization. Organizations undertakingdiarization activities on the original speech should log their actions by appendingto this item and noting the change of contents in the Type-98 record and / orField 11.902: Annotation information / ANN of this record.
- Page 244 and 245: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 246 and 247: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 248 and 249: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 250 and 251: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 252 and 253: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 254 and 255: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 256 and 257: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 258 and 259: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 260 and 261: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 262 and 263: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 264 and 265: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 266 and 267: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 268 and 269: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 270 and 271: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 272 and 273: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 274 and 275: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 276 and 277: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 278 and 279: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 280 and 281: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 282 and 283: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 284 and 285: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 286 and 287: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 288 and 289: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 290 and 291: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 292 and 293: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 296 and 297: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 298 and 299: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 300 and 301: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 302 and 303: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 304 and 305: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 306 and 307: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 308 and 309: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 310 and 311: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 312 and 313: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 314 and 315: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 316 and 317: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 318 and 319: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 320 and 321: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 322 and 323: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 324 and 325: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 326 and 327: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 328 and 329: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 330 and 331: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 332 and 333: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 334 and 335: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 336 and 337: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 338 and 339: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 340 and 341: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 342 and 343: ANSI/NIST-ITL 1-2011 - UPDATE 2013
ANSI/<strong>NIST</strong>-ITL 1-<strong>2011</strong> - UPDATE 2013 DRAFT VERSIONrecording. 0 indicates no snipping and 1 indicates that snipping has occurred.oThe second in<strong>for</strong>mation item (snipping authority organization name / SPA) isan optional text field of up to 300 characters containing in<strong>for</strong>mation about theagency that per<strong>for</strong>med the snipping segmentation. Agencies undertakingsnipping activities on the original speech should log their actions by appendingto this item and noting the change of field contents in the Record Type-98:In<strong>for</strong>mation assurance record and/or Field 11.902: Annotationin<strong>for</strong>mation / ANN of this record.oThe third in<strong>for</strong>mation item (comments / COM) is an optional unrestricted textstring of up to 4000 characters that may contain text in<strong>for</strong>mation about the snipactivities affecting the voice recording.8.11.19 Field 11.024: Snipping diary / SPDThis optional field allows the documentation of snips obtained from larger voicerecordings, which may themselves be included in the transaction as a Record Type-20:Source representation record .There may be up to 600,000 snips diarized in repeating subfields. Each snip shall bedominated by speech from the subject of this Type-11 record. Four items (uniquelynumbering the snips by track and giving relative start and end times of each) aremandatory in each subfield. A fifth item is optional within each subfield and allows <strong>for</strong>comments on the identified snip. If there is no snipping (Field 11.023: Snippingsegmentation/ SNP) indicated, then all of the data in the voice recording will beconsidered as in toto. There can be at most one snipping diary <strong>for</strong> each Type-11 record.o The first in<strong>for</strong>mation item (snip identifier / SPI) is mandatory in each subfieldand uniquely numbers the snip to which the following items in the subfield apply.There is no requirement that the snips be numbered sequentially. The SPI maycontain up to 6 digits and up to 600,000 snips may be identified. If Field 11.023indicates snipping, the voice recording must consist of at least one snip.o The second in<strong>for</strong>mation item (tracks / TRK) is mandatory if TRC in Field11.012: Physical media object / PMOor CHC of Field 11.014: Codec / CDCis greater than one and lists all tracks or channels on the recording to which thesnip identifier applies. . No value in this list should be greater than the value ofPMO_TRC or CDC_CHC, whichever applies. For example, in the case of atwo-track stereo recording where both tracks contain a snip at the same start andend times, this list will be “1” and “2”o The third in<strong>for</strong>mation item (relative start time / RST) is a mandatory integer <strong>for</strong>every snip identified by an SPI and indicates in microseconds the time of thestart of the snip relative to the beginning of the voice recording. The item cancontain up to 11 digits, meaning that the RST might occur anywhere within avoice recording limited to about 28 hours. Because each snip is obtainedindependently from a larger voice recording, snips from a single track on theaudio object described in Field 11.003: Audio object descriptor code /AODshall not overlap, meaning that the RST of a snip shall not occur between theRST and RET of any other snip on the same track. If the Type-11 record refersMay, 2013 DRAFT VERSION UPDATE 2013 Page 253