acknowledgements for ansi/nist-itl 1-2011 - NIST Visual Image ...
acknowledgements for ansi/nist-itl 1-2011 - NIST Visual Image ... acknowledgements for ansi/nist-itl 1-2011 - NIST Visual Image ...
ANSI/NIST-ITL 1-2011 - UPDATE 2013 DRAFT VERSION8.10.56 Field 10.998: Geographic sample acquisition location / GEOThis optional field contains the location where the image was acquired – not where it isstored. See Section 7.7.3.8.10.57 Field 10.999: Body part image / DATAThis field contains the image. See Section 7.2 for details on the Data field entry.[2013n>] If this field is used, Field 10.994: External file reference / EFR shall not beused. However, one of the two fields shall be present in all instances of this record type.[
ANSI/NIST-ITL 1-2011 - UPDATE 2013 DRAFT VERSION[2013v>]8.11 Record Type-11: Forensic and investigatory voice recordThe Type -11 is focused upon the analysis of voice signals for forensic and investigaorypurposes. Voice analysis is often divided into two general areas:· Speech Recognition· Speaker RecognitionBoth of these areas may play a part in forensic and investigatory analyses. Speechrecognition involves the interpretation of vocalizations for their linguisticcontent. Speaker recognition involves determining who is performing the vocalizations.The human voice - generally carrying both speech and non-speech sounds - propagatesvarying distances through air (principally) or another medium to reach acoustictransducers (usually microphones, when recorded) of varying amplitude and phaseresponse. For purposes of the Type-11 record, a “speaker” is any person producing“vocalizations” from the throat or oral cavity, which may be voiced (activating thevocal cords) or unvoiced (such as aspirations, whispers, tongue clicks and other similarsounds). An automated interlocutor is considered to be a “speaker” for the purposes ofthis record type, since the intent is to directly mimic human speech, although such aspeaker will not be the primary subject of an ANSI/NIST-ITL transaction.When voice sounds carry speech, that speech usually occurs within a social contextinvolving more than one speaker. Consequently, a recorded speech signal may containthe voices of multiple speakers. Thus, the Type-11 record accommodates recordingswith multiple speakers; can designate whether any of the speakers are alreadyidentified; can convey the count the number of individual speakers; and can conveywhen the same person is speaking at multiple points during the recording. It can alsoconvey the transcribed linguistic content of each speaker, if it can be deciphered.An ANSI/NIST-ITL transaction is typically focused upon the identification of oneindividual. However, in order to effectively perform that identification (or verificationof identity), it may be necessary to include information about other persons in thetransaction. With voice recordings, it may be necessary to contain in a transaction‘known’ clips of certain persons who are possibly speaking in the recording underinvestigation, in order to separate out the speech of the known individuals andconcentrate on the identification of the remaining speakers. Thus, there may be adifference between the ‘subject of the transaction’ and the ‘subject of the record.’Multiple Type-11 records may be contained in a single transaction. The type of actiondesired by the submitter of the transaction (to be performed by the receiver of thetransaction) is specified in a Type-1 record in the TOT field.There are factors that had to be considered in developing this record type. Some of themost significant ones include:· Voice signals generally contain both speech and non-speech elements, either ofwhich might be useful in speaker recognition applications.· Unlike other modalities, voice signals are collected in time - not spatial -230
- Page 220 and 221: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 222 and 223: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 224 and 225: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 226 and 227: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 228 and 229: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 230 and 231: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 232 and 233: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 234 and 235: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 236 and 237: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 238 and 239: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 240 and 241: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 242 and 243: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 244 and 245: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 246 and 247: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 248 and 249: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 250 and 251: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 252 and 253: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 254 and 255: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 256 and 257: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 258 and 259: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 260 and 261: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 262 and 263: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 264 and 265: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 266 and 267: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 268 and 269: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 272 and 273: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 274 and 275: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 276 and 277: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 278 and 279: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 280 and 281: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 282 and 283: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 284 and 285: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 286 and 287: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 288 and 289: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 290 and 291: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 292 and 293: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 294 and 295: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 296 and 297: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 298 and 299: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 300 and 301: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 302 and 303: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 304 and 305: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 306 and 307: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 308 and 309: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 310 and 311: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 312 and 313: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 314 and 315: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 316 and 317: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 318 and 319: ANSI/NIST-ITL 1-2011 - UPDATE 2013
ANSI/<strong>NIST</strong>-ITL 1-<strong>2011</strong> - UPDATE 2013 DRAFT VERSION8.10.56 Field 10.998: Geographic sample acquisition location / GEOThis optional field contains the location where the image was acquired – not where it isstored. See Section 7.7.3.8.10.57 Field 10.999: Body part image / DATAThis field contains the image. See Section 7.2 <strong>for</strong> details on the Data field entry.[2013n>] If this field is used, Field 10.994: External file reference / EFR shall not beused. However, one of the two fields shall be present in all instances of this record type.[