acknowledgements for ansi/nist-itl 1-2011 - NIST Visual Image ...

More documents

Recommendations

Info

ANSI/NIST-ITL 1-2011 - UPDATE 2013 DRAFT VERSION8.10.35 Field 10.039: Type-10 reference number / T10This is an optional field. It is used when several images cover either the entire scar, (needle)mark, tattoo (SMT) or portions of it. The same T10 is used when referring to a particularimage. This field shall only be present if multiple Type-10 records in the transactioncontain the same SMT or body part. It can be used for any image type specified in Field10.003: Image type / IMT . T10 is a positive integer. The only requirement is that a valuefor T10 only links related images. An example would be to assign a value of 1 to twodifferent Type-10 records, the first of which has an image of a tattoo over the entire chest ofa male. A second image of a small portion of the tattoo on the chest showing a gang symbolis contained in another Type-10 with the same value of 1 for T1. No other Type-10 records(in this example) would have a value of 1 for T10.8.10.36 Field 10.040: NCIC SMT code / SMTThis field shall be used only when Field 10.003: Image type / IMT = “SCAR”, “MARK”,or “TATTOO”. It is not used for other images. It is used to identify a general location of thecaptured scar, mark, tattoo, or other characteristic (including piercings) in an image. Thecontents of this field shall be from the NCIC code (See Annex D). The captured image mayencompass an area larger than that specified by a single NCIC body part code for theparticular image type. This situation may be accommodated by listing multiple NCICcodes, each in a separate subfield. In this case the primary code is listed first. There neednot be more than one subfield.For the “marks” category, the NCIC manual lists the common locations for needle trackmarks. For other body part locations not listed under the “marks” category, use the bodylocation codes listed for scars.8.10.37 Field 10.041: SMT size or size of injury or identifyingcharacteristic / SMSThis optional field shall contain the dimensions of the portion of image contained in thisrecord (it may be the entire scar, mark, tattoo, injury or identifying characteristic). It shallconsist of two information items: height / HGT and width / WID. Each dimension shall beentered to the nearest centimeter. This field shall be used only when Field 10.003: Imagetype / IMT does not equal “FACE”.8.10.38 Field 10.042: SMT descriptors / SMDThis optional field is used to describe the content of the SMT image to an extent greater thandocumented in Field 10.040: NCIC SMT code / SMT. It shall consist of one or more setsof information items. The 2007 version of the standard restricted the number of subfields to9. It was unrestricted in the 2008 version. This version maintains the upper limit of 9 for allencodings. This field shall be used only when Field 10.003: Image type / IMT = “SCAR”,“MARK”, or “TATTOO”.• The first information item (SMT code indicator / SMI) shall identify thetype of SMT. It shall contain “SCAR” to indicate healed scar tissue that wasMay, 2013 DRAFT VERSION UPDATE 2013 Page 219
ANSI/NIST-ITL 1-2011 - UPDATE 2013 DRAFT VERSIONClassCodethe result an accident or medical procedure. “PIERCING” is a deliberatelymade hole through body tissue, usually to wear body ornamentation. Anentry of “MARK” shall be used for the pattern resulting from needle or trackmarks. For deliberately applied or drawn images, the first information itemshall contain “TATTOO” to indicate a common tattoo or indelible imageresulting from the pricking of the skin with a coloring matter;“CHEMICAL” if the image was created by the use of chemicals to burn theimage into the skin; “BRANDED” if the image was burned into the skinusing a branding iron or other form of heat; or “CUT” if the image wascaused by incision of the skin. The value for this information item is selectedfrom the “Image sub-code” column of Table 59.• The second information item (tattoo class / TAC) shall be the general classcode of tattoo chosen from the “Class Code” column of Table 68. Thisinformation item does not apply to scars and marks.• The third information item (tattoo subclass / TSC) shall be the appropriatesubclass code selected from Table 68. For each general class of tattoo, thereare several defined subclasses. This information item does not apply to scarsand marks.• The fourth (optional) information item (tattoo description / TDS) shall be atext string that provides additional qualifiers to describe the image or portionof the image. For example, to fully describe a tattoo, there may be a classdescription of “ANIMAL”, with a subclass description of “DOG”, andqualified by “golden retriever with an overbite”. This information item doesnot apply to scars and marks.An SMT image consisting of several parts or sub-images shall use subfields to fullydescribe the various parts or features found in the total image. The first subfield shalldescribe the most predominant feature or sub-image contained in the SMT image.Subsequent repeating subfields shall describe additional portions of the image that are notpart of the main or central focal point of the image. For example, a tattoo consisting of aman with a snake on the arm being followed by a dog may contain three subfields: onedescribing the man, a second describing the snake, and a third describing the dog.SubclassDescriptionTable 68 Tattoo classes and subclassesSubclassCodeClassCodeSubclassDescriptionHUMAN Male Face MFACE ANIMAL Cats & Cat Heads CATFemale Face FFACE Dogs & Dog Heads DOGSubclassCodeAbstract Face ABFACE Other Domestic Animals DOMESTICMale Body MBODY Vicious Animals (Lions, etc.) VICIOUSFemale Body FBODY Horses (Donkeys, Mules, etc.) HORSE220
Page 1:
NIST Special Publication 500-xxxANS
Page 5 and 6:
5.3.18 Type-18 records ............
Page 7 and 8:
8.1.4 Field 1.004 Type of transacti
Page 9 and 10:
8.9.7.18 Field 9.322: EFS core delt
Page 11 and 12:
8.11 Record Type-11: Forensic and i
Page 13 and 14:
8.14.2 Field 14.002: Information de
Page 15 and 16:
8.17 Record Type-17: Iris image rec
Page 17 and 18:
8.19.24 Field 19.902: Annotation in
Page 19:
8.24.6 Field 99.101: Biometric type
Page 22 and 23:
F.6.3 Reference points.............
Page 24 and 25:
Figure 34: Palm with carpal delta a
Page 26 and 27:
Table 31 Off-center fingerprint pos
Page 28 and 29:
Table 95 DNA sample cellular types.
Page 30 and 31:
Type-11:A new record type introduce
Page 32 and 33:
ACKNOWLEDGEMENTS FOR ANSI/NIST-ITL
Page 34 and 35:
Will Graves, Rob Mungovan, Catherin
Page 36 and 37:
John ManzoFBI/BIOMETRICS Center ofE
Page 38 and 39:
General Editor: Brad Wing[2013a>]AC
Page 40 and 41:
CANVASSEES For the 2013 UpdateTO BE
Page 42 and 43:
ANSI/NIST-ITL 1-2011 - UPDATE 2013
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
Page 208 and 209:
Page 210 and 211: ANSI/NIST-ITL 1-2011 - UPDATE 2013
Page 310 and 311:
Page 312 and 313:
Page 314 and 315:
Page 316 and 317:
Page 318 and 319:
Page 320 and 321:
Page 322 and 323:
Page 324 and 325:
Page 326 and 327:
Page 328 and 329:
Page 330 and 331:
Page 332 and 333:
Page 334 and 335:
Page 336 and 337:
Page 338 and 339:
Page 340 and 341:
Page 342 and 343:
Page 344 and 345:
Page 346 and 347:
Page 348 and 349:
Page 350 and 351:
Page 352 and 353:
Page 354 and 355:
Page 356 and 357:
Page 358 and 359:
Page 360 and 361:
Page 362 and 363:
Page 364 and 365:
Page 366 and 367:
Page 368 and 369:
Page 370 and 371:
Page 372 and 373:
Page 374 and 375:
Page 376 and 377:
Page 378 and 379:
Page 380 and 381:
Page 382 and 383:
Page 384 and 385:
Page 386 and 387:
Page 388 and 389:
Page 390 and 391:
Page 392 and 393:
Page 394 and 395:
Page 396 and 397:
Page 398 and 399:
Page 400 and 401:
Page 402 and 403:
Page 404 and 405:
Page 406 and 407:
Page 408 and 409:
Page 410 and 411:
Page 412 and 413:
Page 414 and 415:
Page 416 and 417:
Page 418 and 419:
Page 420 and 421:
Page 422 and 423:
Page 424 and 425:
Page 426 and 427:
Page 428 and 429:
Page 430 and 431:
Page 432 and 433:
Page 434 and 435:
Page 436 and 437:
Page 438 and 439:
Page 440 and 441:
Page 442 and 443:
Page 444 and 445:
Page 446 and 447:
Page 448 and 449:
Page 450 and 451:
Page 452 and 453:
Page 454 and 455:
Page 456 and 457:
Page 458 and 459:
Page 460 and 461:
Page 462 and 463:
Page 464 and 465:
Page 466 and 467:
Page 468 and 469:
Page 470 and 471:
Page 472 and 473:
Page 474 and 475:
Page 476 and 477:
Page 478 and 479:
Page 480 and 481:
Page 483 and 484:
Page 485 and 486:
Page 487 and 488:
Page 489 and 490:
Page 491 and 492:
Page 493 and 494:
Page 495 and 496:
Page 497 and 498:
Page 499 and 500:
Page 501 and 502:
Page 503 and 504:
Page 505 and 506:
Page 507 and 508:
Page 509 and 510:
Page 511 and 512:
Page 513 and 514:
Page 515 and 516:
Page 517 and 518:
Page 519 and 520:
Page 521 and 522:
Page 523 and 524:
Page 525 and 526:
Page 527 and 528:
Page 529 and 530:
Page 531 and 532:
Page 533 and 534:
Page 535 and 536:
Page 537 and 538:
Page 539 and 540:
Page 541 and 542:
Page 543 and 544:
Page 545 and 546:
Page 547 and 548:
Page 549 and 550:
Page 551 and 552:
Page 553 and 554:
Page 555 and 556:
Page 557 and 558:
Page 559 and 560:
Page 561 and 562:
Page 563 and 564:
Page 565 and 566:
Page 567 and 568:
Page 569 and 570:
Page 571 and 572:
Page 573 and 574:
Page 575 and 576:
Page 577 and 578:
Page 579 and 580:
Page 581 and 582:
Page 583 and 584:
Page 585 and 586:
Page 587 and 588:
Page 589 and 590:
Page 591 and 592:
Page 593 and 594:
Page 595 and 596:
Page 597:
show all

acknowledgements for ansi/nist-itl 1-2011 - NIST Visual Image ...

Create successful ePaper yourself

Delete template?

Save as template?