acknowledgements for ansi/nist-itl 1-2011 - NIST Visual Image ...
acknowledgements for ansi/nist-itl 1-2011 - NIST Visual Image ... acknowledgements for ansi/nist-itl 1-2011 - NIST Visual Image ...
ANSI/NIST-ITL 1-2011 - UPDATE 2013 DRAFT VERSIONSingle video frame from an analog video camera ANALOG VIDEOSingle video frame from a digital video camera DIGITAL VIDEOVendor specific sourceVENDORRecord Type-20 original source representation TYPE20Another source image OTHERNote that the first seven attribute codes in the table above directly correspond to attributecodes 0 through 6 in Table 101 Acquisition source, which is used in Field 20.014:Acquisition source / AQS. “OTHER” corresponds to attribute code 31 in that table, as wellas attribute code 11 (computer screen image capture). “VENDOR” corresponds to code 30.The remaining attribute codes in Table 101 relate to audio and video capture.8.10.23 Field 10.024: Subject quality score / SQSThis optional field shall specify quality score data for facial images (IMT = 'FACE') storedin this record. There may be subfields for different quality scores and algorithms. SeeSection 7.7.7.8.10.24 Field 10.025: Subject pose angles / SPAThis field shall be present [2013a>] if and only if [
ANSI/NIST-ITL 1-2011 - UPDATE 2013 DRAFT VERSION· The sixth information item is the uncertainty in degrees for roll / ROLU.8.10.25 Field 10.026: Subject facial description / SXSThis field is mandatory if the SAP entry for a facial image (Field 10.013: Subjectacquisition profile / SAP) is 40, 50 or 51. (IMT=FACE only). In other cases, this field isoptional for facial images. When present, it shall describe attributes associated with thesubject’s captured facial image. This version maintains the upper limit of 50 repeatingsubfields for all encodings from the 2007 version. (The 2008 version was unrestricted). Thevalue should be selected from the “Attribute code” column of Table 63. For “PhysicalCharacteristic”, enter a characteristic as listed in the NCIC code. See Annex D: NCIC codetable. In the 2007 version, the minimum character count for this was listed as 5; however,there was an entry of “HAT” which has 3 characters. Thus, the minimum character count inthis version is set at 3.Table 63 Subject facial description codesFacial description attributeExpression unspecifiedNeutral (non-smiling) with both eyes open and mouth closedSmiling (inside of the mouth and/or teeth is not exposed - closed jaw).Subject having mouth openHaving teeth visibleRaising eyebrowsFrowningLooking away from the cameraSquintingSubject wearing left eye patchSubject wearing right eye patchSubject wearing clear glassesSubject wearing dark or visible colored glasses (medical)Head covering/hatWearing scarfHaving mustacheHaving beardEar(s) obscured by hairBlinking (either or both eyes closed)Having distorting medical condition impacting feature point detectionPhysical characteristicsOther characteristicsAttribute codeUNKNOWNNEUTRALSMILEMOUTH OPENTEETH VISIBLERAISED BROWSFROWNINGEYES AWAYSQUINTINGLEFT EYE PATCHRIGHT EYE PATCHCLEAR GLASSESDARK GLASSESHATSCARFMOUSTACHEBEARDNO EARBLINKDISTORTING CONDITIONFrom Annex DAlphabetic Text, up to 20 characters208
- Page 198 and 199: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 200 and 201: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 202 and 203: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 204 and 205: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 206 and 207: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 208 and 209: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 210 and 211: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 212 and 213: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 214 and 215: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 216 and 217: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 218 and 219: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 220 and 221: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 222 and 223: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 224 and 225: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 226 and 227: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 228 and 229: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 230 and 231: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 232 and 233: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 234 and 235: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 236 and 237: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 238 and 239: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 240 and 241: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 242 and 243: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 244 and 245: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 246 and 247: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 250 and 251: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 252 and 253: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 254 and 255: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 256 and 257: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 258 and 259: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 260 and 261: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 262 and 263: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 264 and 265: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 266 and 267: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 268 and 269: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 270 and 271: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 272 and 273: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 274 and 275: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 276 and 277: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 278 and 279: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 280 and 281: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 282 and 283: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 284 and 285: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 286 and 287: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 288 and 289: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 290 and 291: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 292 and 293: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 294 and 295: ANSI/NIST-ITL 1-2011 - UPDATE 2013
- Page 296 and 297: ANSI/NIST-ITL 1-2011 - UPDATE 2013
ANSI/<strong>NIST</strong>-ITL 1-<strong>2011</strong> - UPDATE 2013 DRAFT VERSIONSingle video frame from an analog video camera ANALOG VIDEOSingle video frame from a digital video camera DIGITAL VIDEOVendor specific sourceVENDORRecord Type-20 original source representation TYPE20Another source image OTHERNote that the first seven attribute codes in the table above directly correspond to attributecodes 0 through 6 in Table 101 Acquisition source, which is used in Field 20.014:Acquisition source / AQS. “OTHER” corresponds to attribute code 31 in that table, as wellas attribute code 11 (computer screen image capture). “VENDOR” corresponds to code 30.The remaining attribute codes in Table 101 relate to audio and video capture.8.10.23 Field 10.024: Subject quality score / SQSThis optional field shall specify quality score data <strong>for</strong> facial images (IMT = 'FACE') storedin this record. There may be subfields <strong>for</strong> different quality scores and algorithms. SeeSection 7.7.7.8.10.24 Field 10.025: Subject pose angles / SPAThis field shall be present [2013a>] if and only if [