Professional Application Guide - Alexseal

Technical Data SheetsTechnical Data Sheet: 462-44N SeriesTechnical Data SheetsTechnical Data Sheet: 462-44N SeriesInterior Urethane Coating (continued)Additional NotesApplication by Brush/RollingApply 2 - 3 coats to a wet film thickness (WFT) of 2 - 3 mils (50 - 75 microns) percoat. Each coat should dry to a tape dry stage, 12 - 24 hrs. This will achieve a dry filmthickness (DFT) of 2 - 3 mils (50 - 75 microns) for a 2 coat application. For a 3 coatapplication, this will achieve a dry film thickness (DFT) of 2 - 4.5 mils (50 - 112 microns).9. Pot Life and DryingOptimal application environment range - min. 15°C (60°F) 40% RH, up to max. 30°C (85°F) 80%RH.Temperature for minimum time 15°C(60°F)20°C(68°F)25°C(77°F)30°C(85°F)Pot Life - approx. 18 hrs 12 hrs 9 hrs 6 hrs NADust Free 40 - 60min30 - 45min20 - 30 min 15 - 20minTape Dry 32 hrs 24 hrs 16 hrs 12 hrs NAFully Cured 14 days 7 days 5 days 3 days N/ARecoat after tack up withALEXSEAL ® Interior CoatingOvercoat with another product.Preparation including sanding isrequired40 - 60min30 - 45min20 - 30 min 15 - 20minMaxTimeNA4 hrs24 hrs 24 hrs 18 hrs 12 hrs N/ANote:The above chart reflects approximate minimum and maximum time. Surfacetemperature, air flow, direct or non-direct sunlight, quantity and or choice of reducer,and film thickness will effect actual tack up, recoat, overcoat, and drying times during application.During the drying phase the minimum temperature is 15°C (60°F). Ideal temperature: 25°C (77°F).The minimum application condition should be 3°C (5.4°F) above dew point.10. PackagingN…. ALEXSEAL ® Interior Coating (Base Color) 1 GalC6402 ALEXSEAL ® Interior Coating Converter 1 QTR6062 ALEXSEAL ® Interior Coating Reducer 1 GalR6068 ALEXSEAL ® Interior Coating Reducer Slow 1 Gal128ALEXSEAL ® Professional Application Guide version 0.4.3ALEXSEAL.COM > Europe: +49 0 40 75 10 30 > North America: +1 843 654 7755129