Professional Application Guide - Alexseal

Technical Data SheetsTechnical Data Sheet: 450-22 / 23S SeriesTechnical Data SheetsTechnical Data Sheet: 450-22 / 23S SeriesSuede Coating 702 (continued)9. Pot Life and DryingOptimal application environment range - min. 15°C (60°F) 40% RH, up to max. 30°C (85°F) 80% RHTemperature for minimum time 15°C(60°F)20°C(68°F)25°C(77°F)30°C(85°F)MaxTimePot Life - approx. 90 min 60 min 55 min 45 min 90 minDust Free 45 min 30 min 15 - 30 min 15 min N/ATape Dry 16 hrs 14 hrs 12 hrs 2 hrs N/AFully Cured 5 days 4 days 2 - 3 days 2 days N/APigmentationInstead of mineral and organic pigments, polymer beads, dyed in different colors, areused for the production of ALEXSEAL ® Suede Coating 702. Due to their size, thesebeads are visible as single particles in the dried coating. This beaded or salt and peppereffect is what makes the coating difficult to spot repair.Prior to starting a project, an application of this product to sample panels is stronglyrecommended to verify satisfactory color, texture and overall finish.Additional NotesNote:The above chart reflects approximate minimum and maximum time. Surfacetemperature, air flow, direct or non-direct sunlight, quantity and or choice of reducer,and film thickness will effect actual tack up, recoat, overcoat, and drying times during application.During the drying phase the minimum temperature is 15°C (60°F). Ideal temperature: 25°C (77°F).The minimum application condition should be 3°C (5.4°F) above dew point.10. PackagingS…. ALEXSEAL ® Suede Coating 702 (Base Color) 0.89 LiterC7752 ALEXSEAL ® Suede Coating 702 Converter 0.125 LiterR7097 ALEXSEAL ® Suede Reducer 702 / 701 Standard 1 LiterR7093 ALEXSEAL ® Suede Reducer Slow 1 LiterColor ConsistencyALEXSEAL® Suede Coating 702 colors are available in many different color shades.Due to the unique finish of this product, color variations can be expected. Variationsfrom batch to batch cannot be avoided.Spot RepairsApplication should be restricted to removable parts and panels to make future repairseasier. Inconsistencies in color, texture, and finish may be experienced when spotrepairs are attempted with this finish. It is recommended to re-spray the entire part ifrepairs are required.TextureThe application results may be influenced by the painter’s application technique,varying application parameters (spraying method, drying) as well as the use of differentsubstrates.124ALEXSEAL ® Professional Application Guide version 0.4.3ALEXSEAL.COM > Europe: +49 0 40 75 10 30 > North America: +1 843 654 7755125