Professional Application Guide - Alexseal

Technical Data SheetsTechnical Data Sheet: 342-52W SeriesTechnical Data SheetsTechnical Data Sheet: 342-52W SeriesWaterborne Topcoat (continued)Additional NotesApplication by Brush / RollingApply 2 coats to a wet film thickness (WFT) of 2.5 - 3 mils (60 - 80 microns) per coat.Each coat should dry to a tape dry stage, 12 - 24 hrs. Sand with 320 - 400 betweencoats. This will achieve a dry film thickness (DFT) of 1.2 - 1.6 mils (30 - 40 microns) fora 2 coat application. Maximum recommended film thickness during an application is 2coats totalling 2.5 - 3 mils s (60 - 80 micron) WFT, or 1.2 - 1.6 mils (30 - 40 microns)DFT.9. Pot Life and DryingOptimal application environment range - min. 15°C (60°F) 40% RH, up to max. 30°C (85°F) 80% RHTemperature for minimum time 15°C(60°F)20°C(68°F)25°C(77°F)30°C(85°F)Pot Life - approx. 2 - 3 hrs 2 - 3 hrs 2 hrs 1 ½ hrs N/ADust Free (at 60 % relativehumidity)MaxTime4 hrs 3 hrs 2 hrs 1 hr N/ATape Dry 26 hrs 24 hrs 18 hrs 12 hrs N/AFully Cured 21 days 18 days 14 days 12 days N/ARecoat after tack up withALEXSEAL ® Waterborne TopcoatOvercoat with another product.Preparation including sanding isrequired90 min 60 min 60 min 60 min 24 hrs24 hrs 24 hrs 18 hrs 12 hrs N/ANote:The above chart reflects approximate minimum and maximum time. Surfacetemperature, air flow, direct or non-direct sunlight, quantity of reducer, and filmthickness will effect actual times during application. During the drying phase the minimumtemperature is 15°C (60°F). Ideal temperature: 25°C (77°F).The minimum application condition should be 3°C (5.4°F) above dew point.10. PackagingN…. ALEXSEAL ® Waterborne Topcoat (Base Color) 1 GalC9929 ALEXSEAL ® Waterborne Topcoat Converter 1 QT116ALEXSEAL ® Professional Application Guide version 0.4.3ALEXSEAL.COM > Europe: +49 0 40 75 10 30 > North America: +1 843 654 7755117