Structured Cabling & Accessories - Minitran

MINI5/6 Wallplates, modules and jacksLJ6 Wallplates & BlanksTMFor use with 37x25mm LJ6C modulesSingle position single gangMT50-116CTwin position single gangMT50-126CFour position double gangMT50-416CBlank 37x25mm moduleMT50-BM6CBlank 37x12.5mm module MT50-BM6C125Cat5e UTP Modules (50x25mm & LJ6)TM• Modules just 20mm deep• Cable tie on 50x25mm modules• With label window• MT50-SLSA is LSA termination, other models aredual termination50x25mm Modules50x25mm white Cat5e UTP50x25mm black Cat5e UTPLJ6C ModulesLJ6C 37x25mm white Cat5e UTPLJ6C 37x25mm black Cat5e UTPMT50-SLSAMT50-SSMKBKMT50-SLJKLPMT50-SLJKLP-BKUnloaded Modules (50x25mm & LJ6)• Shuttered modules with label window• Accepts snap in Cat5e jacks (below), Cat6 jacks(page 9) & Cat6a jacks (page 10)Angled50x25mmFlat 50x25mm moduleMT56-RJS1Flat 50x25mm non shuttered module MT50-RJ01Angled 50x25mm moduleMT56-SAMOAngled 50x25mm black module MT56-SAMOBKAngled 37x25mm LJ6 moduleMT50-SLJAFlat50x25mmAngled LJ6Cat5e Snap In JacksTM• Snaps into shuttered modules shown above.• Dual termination LSA/110. Use CT28 tool on page 88.• Keystone style jack• Part of the Mini5 25 year system warrantyprogrammeUTP Cat5e punch down jackShielded Cat5e punch down JackMT50-CAT5EJMT50-CAT5ESsales@minitran.co.uk8www.minitran.co.uk

MINI5/6 wallplates and jacks4 Way Single Gang Wallplate• Four shuttered ports in a single gang 86x86mm• Space saving design• Accepts Mini5/6 Cat5e, Cat6 & Cat6a snap in jacks4 way wallplate MT50-4000Cat6 UTP Tool-Less & Punch Down JacksTool-less JackComponent level jacks exceeds the Cat6 standard &maximises headroom on the installed link.The tool-less jack is fast & easy to terminate andunlike many other "tool-less" designs requires notermination tools apart from a cable snipper & cablestripper.• Dual punchdown LSA/110 or tool-less version• Suitable for 22-26AWG wire• 25 year system warranty via approved installers• Suitable for a 32mm backbox when used withangled MT56-SAMO 50x25mm moduleCat6 UTP tool-less jackCat6 UTP punchdown jackMT66-T180BKMT66-P180BKJPunchdown JackSnaps into modular panels on page 13 &angled wallplate & LJ6 modules on page 8Assembly Procedure (Tool-less jack)Enclosures:pages 208-224 Cable organiser: page 174Head Office: T: 01279 757775 • F: 01279 653535 9 Scotland: T: 01383 435985 • F: 01383 435993

Mini6 cat6 modules, cat6a jack & backboxesCat6 UTP Modules (50x25mm & LJ6)TM• Modules just 20mm deep• MT66-SLSA is LSA termination, other modulesdual termination• With label windowSee Sharpmark labels pages 94-95Cat6 50x25mm Modules50x25mm White Cat6 UTP module50x25mm Black Cat6 UTP moduleCat6 LJ6 ModuleLJ6C 37x25mm WhiteCat6 UTP moduleMT66-SLSAMT66-SSMKBKMT66-SLJKLPJNot part of the Mini6 25 year warranty.See jacks on page 9 & unloaded moduleson page 8 for 25 year warranty parts.Cat6a Shielded Tool-less JackTMExceeds the Cat6a standard & maximises headroomon the installed link. Fast & easy to terminate &unlike many other "tool-less" designs requires notermination tools apart from a cable snipper & cablestripper.• Suitable for 23-24AWG solid wire• Meets TIA/EIA 568B.2-10• 25 year system warranty via approved installersAssembly procedureCat6a shielded tool-less jackMT66-TGSJSuitable for a 32mm backbox when used with angled MT56-SAMO 50x25mm module onpage 8 and MT66-CM241UBK & MT66-CM482UBK modular panels on page 13Backboxes• Knock outs at rear, top & bottom of PVC boxes• Knock outs at angle of top/rear & bottom/rear ofdry lining versions.Standard back Boxes (PVC)Single gang 21mm deepDP1-21PWBSingle gang 32mm deepDP1-32PWBSingle gang 45mm deepDP1-45PWBDouble gang 32mm deepDP2-32PWBDouble gang 45mm deepDP2-45PWBDry lining back boxes (for cavity walls)Single gang 35mm deepDP1-35PWB-DLSingle gang 46mm deepDP1-46PWB-DLDouble gang 35mm deepDP2-35PWB-DLDouble gang 46mm deepDP2-46PWB-DLSee our data centre productsection on pages 97-111sales@minitran.co.uk10www.minitran.co.uk

Mini5/6 coupler & modular panelsEXTENDEDRANGELoaded Through Coupler Panels (Cat5e/6/6a)• RJ45 ports on front & rear - just plug in leads• Rear cable management & numbered portsCouplers also availableseparately page 16UTP panelShielded panelCat5e Coupler PanelsCat5e UTP 24 port 1UCat5e UTP 48 port 2UCat5e shielded 24 port 1UCat5e shielded 48 port 2UCat6 Coupler PanelsCat6 UTP 24 port 1UCat6 UTP 48 port 2UCat6a Coupler PanelsCat6a shielded 24 port 1USelf adhesive plastic labelling stripwith removable card insertMP24TP5JMP48TP5JMP24TP5JSMP48TP5JSMP24TP6JMP48TP6JMT66-24TP6SMT-PLSModular Patch Panels For UTP Cat5e & Cat6 Jacks• With rear cable management bar• Numbered ports with cable label field24 port 1U MT66-CM241UBK48 port 2U MT66-CM482UBKCat6 jacks page 9; Cat5e jacks page 8Modular Patch Panel For Cat6a JacksTM• With grounding kit• With rear cable management bar• Numbered ports with cable label field24 port 1U MT66-SP241UBKCat6a jacks page 10POE Coupler PanelTM12 port coupler panel MP12-POEUKPoE cameras: pages 244-249PoE switches: page 18612 port coupler panel can be used with any system requiring POE. Upper 12 ports provide connectivity toexisting switches. The panel then injects power into the link & the bottom row can be patched to an existingpanel to take data & power to the end device. Ports provide 10/100Mbps on pins 1/2 & 3/6. Power on pins4/5 (+) & 7/8 (-). Each port provides up to 10 watts making an ideal solution for powering IP telephones,small wireless access points & IP cameras. Each socket provides protection against shorts & current protection650mA & can vary the output depending on the load.Head Office: T: 01279 757775 • F: 01279 653535 13 Scotland: T: 01383 435985 • F: 01383 435993

Mini5 voice & fibre panelsVoice PanelTM• 3 pair voice panel suitable for digital or analoguesystems.• High density 50 ports in just 1U• With rear cable management• Dual termination LSA/110 punch down• Punch down tool CT28 (page 88) is recommended50 port 1U voice panel MP50-1UTEL3Voice cable & othervoice productspages 151-158Fibre PanelsEXTENDEDRANGEUnique design allows LC & SCconnectors to snap in flush to the front panelwithout individual screws.Basic cable managementkit comprising of gland & self adhesive fibre support.• 206mm deep sliding tray• Numbered ports & write on port identification• 2 x 25mm & 2 x 20mm cable entry holes at rear• 20mm cable gland with up to 11mm cable entryTMOM1/2 panels use beige LC/SCcouplerswith phosphor bronze contacts. OM3/OS1/OS2 panels use blue couplers witha ceramic sleeve.Unloaded sliding 1U fibre panelsAccepts up to 12 x SC duplex or12 x LC quad couplers MAT107SP18Accepts up to 24 x SC simplex or24 x LC duplex couplers MAT107SP22Accepts up to 24 x SC duplex or24 x LC quad couplers MAT107SP24Accepts up to 16 ST couplers MAT107SP16Accepts up to 24 ST couplers MAT107SP23ST OM1/2 multimode loaded sliding panels4 port ST OM1/2 MAT107SP16C048 port ST OM1/2 MAT107SP16C0816 port ST OM1/2 MAT107SP16C24 port ST OM1/2 MAT107SP23CSC OM1/2 multimode loaded sliding panels4 port SC OM1/2 MAT107SP18C048 port SC OM1/2 MAT107SP18C0824 port SC OM1/2 MAT107SP18C48 port SC OM1/2 MAT107SP24CSC OM3 multimode & OS1/2 singlemode loadedsliding panels4 port SC OM3 & OS1/2 MAT107SP18CS048 port SC OM3 & OS1/2 MAT107SP18CS0824 port SC OM3 & OS1/2 MAT107SP18CS48 port SC OM3 & OS1/2 MAT107SP24CSLC OM1/2 multimode loaded sliding panels24 port LC OM1/2 MAT107SP22CS2448 port LC OM1/2 MAT107SP22CLC OM3 multimode & OS1/2 singlemode loadedsliding panels4 port LC OM3 & OS1/2 MAT107SP22CS048 port LC OM3 & OS1/2 MAT107SP22CS0824 port LC OM3 & OS1/2 MAT107SP22C2448 port LC OM3 & OS1/2 MAT107SP22CSFibre couplers pages 132-133Fibre pigtails & patch leadspages 125-128See our fibre cable selection andperformance chart on page 122sales@minitran.co.uk14www.minitran.co.uk

Mini5/6 Cable management, couplers & transition pointsCable Tidy Ring PanelsA cost effective, tidy way of managing patch cables1U with 4 metal rings (70mm depth)1U with 5 metal rings (60mm depth)2U with 4 metal rings (70mm depth)HJRP-1UHJRP5-1UHJRP4-2URecessed Cable Tidy Ring PanelSits 60mm behind the mounting runners. Forrestricted cabling space & for a tidier appearance.1U with 4 metal ringsHJRP-1URPCable Tidy Slotted Horizontal Panels• Lightweight plastic construction with slotted cablemanagement fingers• Cable feed through slots on rear• Front cover hinges top and bottom• Ideal for Cat6 & Cat6a cabling1U Front Management2U Front ManagementHSFP-1UHSFP-2UFiller PanelsReserves rack space for future use & helps keepinstallations manageable as a divider betweendevices.1U filler panel2U filler panel3U filler panel4U filler panelPPB-1UBPPB-2UBPPB-3UBPPB-4UBBrush PanelFor a tidy appearance when patching from frontto back.1U brush panelHBBE-1UHead Office: T: 01279 757775 • F: 01279 653535 15 Scotland: T: 01383 435985 • F: 01383 435993

COUPLERS, REDUCERS & TRANSITION POINTSCouplers & Reducers• Cat5e, Cat6 & Cat6a versions• UTP & shielded couplers• Panel mount versions snap into "keystone"wallplates & patch panels• Reducer snaps into mating face of coupler &reduces RJ45 8 position to 6 positionsFree hangingPanel mountFree Hanging CouplersCat5e UTP free hanging (white)Cat5e shielded free hangingCat6 UTP free hanging (black)Cat6a shielded free hangingPanel Mount CouplersCat5e UTP panel mount (black)Cat5e shielded panel mountCat6 UTP panel mount (black)Cat6a shielded panel mountReducerReduces RJ45 to 6 positionsRJ45FCBE5RJ45FCBS5RJ45FCBE6RJ45FCBS6RJ45PCBK5JRJ45PCSH5JRJ45PCBK6JRJ45PCSH6JRJC86BKCat5e and Cat6 Transition PointsFor punching down & joining two ends of Cat5e orCat6 cable. LSA/110 dual punchdown.Cat5e UTPCat5e shieldedCat6 UTPCat6 shieldedMT50-C5EBMT50-C5ESMT66-C6EBMT66-C6ESAdditional couplers& adaptors: seepages 77-79Pedestal & GOPboxes: seepages 178sales@minitran.co.uk16www.minitran.co.uk

mini5 Cat5e patch leadsCat5e U/UTP Patch LeadsTM• 24 AWG copper for Gigabit performance• Strain relief boots moulded flush to the sideof RJ45 plugs to ensure connection to anyRJ45 socket & high density side to side patching.• ETL verified EIA/TIA568B.2For coloured versions please add thefollowing part number suffix:Grey: No suffixOrange: OEWhite: WERed: RDBlack: BKBlue: BEPurple: PEYellow: YWGreen: GNPink: PKPVC Patch Leads (various colours)0.5Mtr PVC1Mtr PVC2Mtr PVC2.5Mtr PVC3Mtr PVC5Mtr PVC7.5Mtr PVC10Mtr PVC20Mtr PVCPCTB5005**PCTB5010**PCTB5020**PCTB5025**PCTB5030**PCTB5050**PCTB5075**PCTB5100**PCTB5200**For definitions of the new cable types e.g.S/FTP, U/UTP etc see page 85Cat5e Shielded S/FTP LSOH Patch LeadsTM• 26 AWG for Gigabit performance• Shielded S/FTP foil & braid with drain wire• Strain relief boots moulded flush to the side of RJ45plugs for connection to any RJ45 socket & highdensity side to side patching• ISO/IEC 11801 & EN502880.5Mtr Grey LSOH1Mtr Grey LSOH2Mtr Grey LSOH3Mtr Grey LSOH5Mtr Grey LSOH10Mtr Grey LSOHPCTM5005ESPCTM5010ESPCTM5020ESPCTM5030ESPCTM5050ESPCTM5100ESCross Over U/UTP Patch LeadsTMUTP cross over patch leads made with Cat5e yellowcable. Black strain relief boot at one end only todifferentiate them from standard patch leads.0.5Mtr1Mtr2Mtr3Mtr5MtrPCTB5005YWBK-XPCTB5010YWBK-XPCTB5020YWBK-XPCTB5030YWBK-XPCTB5050YWBK-XHead Office: T: 01279 757775 • F: 01279 653535 17 Scotland: T: 01383 435985 • F: 01383 435993

Mini6 cat6 & Cat6a patch leadsCat6 U/UTP LSOH Patch LeadsTMPair separationand cabletwists in plugfor true Cat6performanceLSOH Patch Leads (various colours)0.5Mtr LSOHPCTB6005**-AT1Mtr LSOHPCTB6010**-AT2Mtr LSOHPCTB6020**-AT2.5Mtr LSOHPCTB6025**-AT3Mtr LSOHPCTB6030**-AT5Mtr LSOHPCTB6050**-AT7.5Mtr LSOHPCTB6075**-AT10Mtr LSOHPCTB6100**-AT15Mtr LSOHPCTB6150**-AT20Mtr LSOHPCTB6200**-ATAnti tanglelatchprotector• 24AWG copper conductors• Anti tangle strain relief boots• Staggered internal contact design on RJ45 plug &cable pair separator for true Cat6 performance• Strain relief boots moulded flush to the side of RJ45plugs ensure connection to any RJ45 socket & highdensity side to side patching• ETL verified, EIA/TIA568B.2-10Black: BKGrey: No suffixWhite: WEBlue: BEGreen: GNYellow: YWOrange: OERed: RDPink: PKPurple: PEFor coloured versions please replace the **with the required colour. e.g. BE = blueFor definitions of the new cable typese.g. S/FTP, U/UTP etc see page 85Cat6a S/FTP Shielded LSOH Patch LeadsTM• Shielded S/FTP patch leads with a braid & foilshielding & drain wire• Anti tangle strain relief boots• 26AWG wire just 6mm OD• TIA/EIA 568B.2-10• Strain relief boots moulded flush to the side ofRJ45 plugs for connection to any RJ45 socket& high density side to side patchingGrey or blue available: replace the **with the required colour.Grey: No suffixBlue: BEBlack: BK1Mtr LSOH1.5Mtr LSOH2Mtr LSOH3Mtr LSOH5Mtr LSOH10Mtr LSOHPCTS6010A**PCTS6015A**PCTS6020A**PCTS6030A**PCTS6050A**PCTS6100A**Sharpmark labelspages 94-95Panduitlabels &printerpage 96Surveillance:pages 243-250sales@minitran.co.uk18www.minitran.co.uk

Mini5 soho 10" systemSOHO 10" Wall CabinetsTMMPG styleMPE style• Removable/lockable side panels• Lockable glass framed front door.• Knock outs top & bottom• Top air fan hole• 310mm depth8U grey cabinet8U black cabinet12U black cabinetMPG08FMPE08FMPE12FSOHO 10" Cat5e PanelsSOHO 10" Fibre PanelsTMTM• Dual LSA/110 punchdown, CT28 tool recommended(page 88)• Numbered ports with write on label field8 position 1U MP08-KRO-CECBK12 position 1U MP12-KRO-CECBKSOHO 10" Modular PanelsTMAccepts up to 6 x SC duplex or 6 x LC quad couplers.1U fibre panelMP06-SCDU1Couplers for above panelSC duplex OM1/2 couplerFCSC-DPBMSC duplex OM3/OS1 couplerFCSC-DCSSSC duplex blankFCSC-DBLNKLC quad OM1/2 couplerFCLC-QDBLC quad OM3/OS1 couplerFCLC-QDBSCoupler screws (2 per required) MT-FWESCREWCable mngmnt spool (2 x base &8 x cable routing spools MAT107-SPOOL10" SOHO modular panel accepts Cat5e & Cat6snap in jacks (pages 8&9) and through couplers onpage 16.8 position 1U modular panel MP08-M1UFibre patch leadspages 125-128AV products:pages 113-120Head Office: T: 01279 757775 • F: 01279 653535 19 Scotland: T: 01383 435985 • F: 01383 435993

mini5 soho 10" systemSOHO 10" Coax PanelsSOHO 10" PDUTMTMF series 12 port 1U loadedcoupler panelUnloaded 12 port 1U panelfor BNC couplersBNC 75 Ohm coupler forabove panelMP12-CFTCMP12-C131323529INS-751U Power distribution unitwith 3 x UK three pin sockets& a 3 pin plug on a 2Mtr lead.Maximum current 5 amps.3 position PDU MTSHPF3-SOHOSOHO 10" PDUSOHO 10" Cable Management BarTMTMWith 3 x D rings & cable pass through slots.150mm depth 1U high shelf mounts onto frontprofiles of 10" cabinet.1U managerMP1-CM3ShelfMP1-S150SOHO 10" Blank PanelsTMCables: page 7Ethernet switches:pages 184-190Fills unused positions within an enclosure. Theslotted blank manages patch cables or externalcables.1U blank panel with cablemanagement slot1U blank panelMP1-BP1SMP1-BP1Patch leads:page 17sales@minitran.co.uk20www.minitran.co.uk

Mini5/6 3rd Party verificationMini5 Cat5e & Mini6 Cat6 U/UTP cable has been independently verified to the Cat5e and Cat6 standards bythe Intertek & 3P test houses.TMTMHead Office: T: 01279 757775 • F: 01279 653535 21 Scotland: T: 01383 435985 • F: 01383 435993

nexans introduCtion & contentswww.nexans.co.uk/lansystemsNexans has a presence in 39 countries,employing 23,000 people with a turnover of 5billion Euros.Economy Without CompromiseEssential is a cost effective Cat5e & Cat6 UTPsolution. Its available to all installers withNexans instant on line 25 year link warranty.Details below right.Step up to LANmark for Cat5e through toCat7a & fibre solutions. High performancefrom a modular system based around a fasttermination "tool-less" jack. A 25 year systemwarranty covering parts, labour, channel& applications is available via approvedinstallation partners.Nexans section contentsEssential cable, wallplates & modules 23Essential jacks & modular panels 24Essential patch panels 24Backboxes & essential patch leads 25LANmark cable & wallplates 26LANmark modules & jacks 27LANmark modular & punchdown panels 28LANmark fibre panels & zone boxes 29Overhead patching frame 29Cable management 30LANmark patch leads 31Enclosures 32Maritime & Industry cable 33Maritime GG45 jacks & modular panels 33Industry DIN rail modules & patch cords 34Cat6 & Cat7/7a & fibre products for harshindustrial, oil & gas & shipboard or seamoveable constructions.Rewards ClubNexans Rewards Club is a web based schemewith online registration & statements.• Monthly prize draws for £250 of high streetvouchers• Quarterly prize draws for £1000 of high streetvouchers• Open to all installers when registered withRewards Club: see page 25Nexans WarrantiesInstantly download"Link WarrantyCertificates" from theweb or become anapproved Nexans CSPand offer the full systemwarranty: see page 25.sales@minitran.co.uk22www.minitran.co.uk

nexans essential modules and jacksEssential Cat6 Snap In Jack• Snaps into modules & panels shown below• Non-punchdown jack for fast easy termination. Canbe used with comfort tool (420.567) on page 27.• Low profile solution when used with LJ6 modulesCat6 UTP jack 420.116Essential Unloaded Modules• Accepts the snap in jack shown above• 50x25mm module used with wallplates on page 23• Low profile LJ6 solution when used with above jack50x25mm module for jack 423.650LJ6 37x25mm module for jack 423.640Essential Modular Patch Panel• Accepts Essential snap in jack 420.116 (above)• Screen printed numbering (1 - 24) above each port24 port 1U Modular panel 521.660BKEssential Cat5e & Cat6 Patch PanelsRear punchdown• Cat5e & Cat6 with or without rear cablemanagement• LSA/Krone termination (tooling on page 88)• Label window above each group of 6 ports• With cage nuts & cable tiesSupplied with labels pre numbered from1 - 240 (and blanks) saving on site labelprinting time.Horizontal punchdown with Rear MngmntRear Punch Down PanelsCat5e 24 port 1U UTP 424.510Cat5e 48 port 2U UTP 424.511Cat6 24 port 1U UTP 424.610Rear cable management bar 424.512Horizontal punchdown with Rear MngmntCat5e 24 port 1U UTP 424.513Cat6 24 port 1U UTP 424.613sales@minitran.co.uk24www.minitran.co.uk

nexans essential back boxes & patch leadsEssential & LANmark Backboxes• With top/bottom & rear knock outs• Colour matches Nexans wall plates & modulesSingle gang backbox 32mm 424.532Double gang backbox 32mm 424.533Essential Cat5e & Cat6 U/UTP Patch Leads• With moulded strain relief boots• Cross member on Cat6 leads keeps pairs in place &reduces the risk of reduced performance• Compliant with ISO/IEC 11801Cat5eCat6Essential Cat6 patch leadsCat6 1Mtr U/UTP LSOH orange101.21ECOOEssential Cat5e patch leadsCat6 2Mtr U/UTP LSOH orange101.21EEOOCat5e 1.5Mtr U/UTP PVC grey101.112DGGCat6 3Mtr U/UTP LSOH orange101.21EFOOCat5e 3Mtr U/UTP PVC grey101.112FGGCat6 5Mtr U/UTP LSOH orange101.21EHOONexansRewardsClubRewards Club is a web based scheme with online registration.• Monthly prize draw for £250 of high street vouchers, open to all installers registered with Rewards Club• Additional quarterly prize draw for £1000 of high street vouchers based on Nexans spend.0 - £5K spend = 1 entry £5K - £10K spend = 5 entries£10K+ spend = 10 entriesMembers must click on the link in Nexans monthly newsletter to be entered into the draw.Go to www.nexans.co.uk/lansystems to register.Nexans WarrantiesInstantly download "Link Warranty Certificates"from the web or become an approved Nexans CSPand offer the full system warranty.Become a Certified Solution Partner (CSP):CSPs have formal approval from Nexans and canoffer the CSP labour and parts guarantee as wellas channel and applications. Ask for a copy ofhow to become a Nexans Installer or download anapplication form from the Nexans web site.Head Office: T: 01279 757775 • F: 01279 653535 25 Scotland: T: 01383 435985 • F: 01383 435993

nexans lanmark cable & wallplatesStep up to: The LANmark system is available with a 25 year system warranty covering parts &labour (when installed by an approved Nexans partner) or the Link warranty. See details on page 25. LANmark isguaranteed to exceed all the relevant standards. Available in Cat5e through to Cat7a & fibre.LANmark Solid Cable (U/UTP & Shielded)Cat5e U/UTP Solid Cable (305Mtr boxes)Cat5e PVC U/UTP grey 100.517Cat5e LSOH U/UTP orange 100.507Cat5e Shielded Solid Cable (F/UTP in 305Mtrboxes, F2/UTP on 500Mtr reels)Cat5e PVC F/UTP grey 100.441Cat5e LSOH F/UTP orange 100.491Cat5e PVC F2/UTP grey 100.431Cat5e LSOH F2/UTP orange 100.421Cat6 U/UTP Solid Cable (305Mtr boxes)Cat6 PVC U/UTP grey 100.617Cat5e cable:• Performance guaranteed to 155Mhz• Improved ACR & superior EMC performanceCat6 cable:• Tested to 350Mhz, guaranteed performance to250Mhz• Central cross filler improves performance• For 10Base-T, 100/1000Base-TXCat6a cable:• Supports higher frequency required for 10 Gigabit• Performance guaranteed to 500Mhz• Screened to ensure immunity from alien crosstalk &other external interference• For 10Base-T, 100/1000Base-TX, 10GBase-T,Cat7/Cat7a cable:• Cat7a is the highest performing solution in themarket for transmission channels with a capacityof >40Gbps over 100Mtrs. (See discussions at IEEEabout 40/100Gbps)• ACR up to 1000Mhz or 1200Mhz• For 10/100/1000Base-T, 1000Base-TX, 10GBase-TCATV up to 862MhzCat6 LSOH U/UTP orange 100.607Cat6 Shielded Solid Cable (500Mtr reels)Cat6 PVC F/UTP grey 100.629Cat6 LSOH F/UTP orange 100.624Cat6 PVC F2/UTP grey 100.661Cat6 LSOH F2/UTP orange 100.662Cat6a Shielded Solid Cable (500Mtr reels)Cat6a LSOH F1/UTP orange 100.624GCat6a LSOH F/FTP orange 100.694GCat7 & Cat7a shielded solid cableCat7 LSOH S/FTP 600Mhz orange 100.365Cat7a LSOH S/FTP 1000Mhz orange 100.371Cat7a Dual LSOH S/FTP 1000Mhz orange 100.373Cat7a LSOH S/FTP 1200Mhz orange 100.382Cat7 & Cat7a cable on 1000Mtr reels apart from dualcable which is on a 500Mtr reel.Cable selection guide & explanationof the new cable types e.g U/UTP,F/UTP etc on page 85LANmark F2/UTP cable is fast & easy to terminate compared to other shieldedcables because of its unique dual foil construction. The outer foil is removed with the sheathleaving the metallic side of the inner foil exposed ready for grounding.LANmark Wallplates & BlanksFor use with modules on page 27.Single gang flat wallplate 424.013Single gang bevelled wallplate 424.530Double gang flat wallplate 424.023Double gang bevelled wallplate 424.53150x25mm half blank 424.10350x12.5mm quarter blank 424.003sales@minitran.co.uk26www.minitran.co.uk

nexans lanmark modules & jacksLANmark Modules50 x 25mmTwin angledAccepts LANmark jacks shown belowSnaps into wallplates on previous pageLJ6 37 x 25mmTwin angled 50x50mm shuttered module 423.540U50x25mm shuttered module 424.113LJ6 37x25mm shuttered module 424.213LANmark Evo & GG45 Tool-less JacksLANmark shielded jackLANmark UTP jackComfort toolAssembly procedure• Fast termination non punchdown jacks• Wire organiser quickly positions cable pairs• Comfort tool allows fast simultaneous terminationof all 4 pairs in LANmark5/6 & 7 jacks• For use with solid cable. Versions for stranded cablealso available.GG45 Cat7 & Cat7a jacksGG45 jacks have an incorporated switch thatautomaticaly activates a maximum of 8 of its 12contacts. For Cat7 or Cat7a performance the outer8 contacts are used, for backward compatibleperformance the top 8 only contacts are activated.Cat7a GG45 jacks have double the frequency rangeand half the cosstalk compared to Cat6a & providestransmission capacity up to 50Gbps which is fourtimes Cat6a.LANmark5 Cat5e tool-less jacksCat5e UTP jack 420.550Cat5e shielded jack 420.555LANmark6 Cat6 tool-less jacksCat6 UTP jack 420.660Cat6 shielded jack 420.666LANmark6A Cat6a tool-less jackCat6a shielded jack 420.66AGG45 LANmark7 Cat7 & Cat7a jacksCat7 600MHz shielded jack 420.730Cat7a 1000MHz shielded jack 420.735Hand held "comfort" termination toolComfort tool 420.567Stripping tool for LANmark7 cableCat7/7a cable stripper 422.117Due to its high shielding & EMC performance Cat7a offers a potential reduction in powerconsumption compared to Cat6a. Particularly important in data centres where carbon reductionis being looked at. See www.nexans.co.uk/lansystems for further details.Head Office: T: 01279 757775 • F: 01279 653535 27 Scotland: T: 01383 435985 • F: 01383 435993

nexans lanmark patch panelsLANmark One Piece Wallplates• Single gang shuttered86x86mm wallplates• With port label window & labelsSingle gang one port flat wallplate 423.861Single gang twin port flat wallplate 423.862Accepts snap in LANmark jacks onprevious pageLANmark Modular PanelsFixed panel (black or white)• Rear cable management springs hold cable withoutthe need for cable ties• 521.663 has a slide & drop down mechanism givingeasy access to the front & side when rack mounted• With cage nuts and removable shutters• Auto connect earthing system removes the need forindividual bondingAccepts snap in LANmark jacks onprevious pageSliding panel24 port 1U fixed black panel 521.661BK24 port 1U fixed white panel 521.66124 port 1U sliding white panel 521.663White blanks to fill unused ports 420.655Black blanks to fill unused ports 420.655BKNexans Visio templates can now be downloaded free at www.nexans.co.uk/lansystems.Create fast professional cabinet layout drawings.LANmark Angled Modular PanelLANmark Cat5e Shielded PunchdownPanels• Rear cable management springs hold cable withoutthe need for cable ties• With cage nuts & removable shutters• Auto connect earthing system removes the need forindividual bonding521.671• LSA/Krone termination• Slide/drop down mechanism for easy access to thefront/side when rack mounted500.115sales@minitran.co.uk28www.minitran.co.uk

nexans lanmark fibre panels & zone distributionLANmark Fibre PanelsLANmark Fibre Cable & Patch Leads• Multiple cable entry• Sliding 1U panel• Accepts 12 x SC duplex snap incouplers (= 24 ports) or 24 x LC duplex snap incouplers (= 48 ports).1U Sliding panel (unloaded) 441.204SC duplex m/mode coupler 205.614SC duplex s/mode coupler 205.624LC duplex m/mode coupler 205.611LC duplex s/mode coupler 205.621Nexans fibre cable & patch leads for singlemode &OM1 through to OM4 is available. Contact our salesoffice for details.See our full range of fibre products& kits on pages 122-150LANmark Zone Distribution BoxesLANmark Overhead Patching FrameMay be installed in a false floor, above a falseceiling or on the wall. Metal construction withnumbered ports, tie wrap holes, back & bottomcable entry. Accepts LANmark jacks shown on page** or fibre couplers shown above.6 way black to accept LANmarkCat5e - Cat7a jacks521.606BK12 way white to accept LANmarkCat5e - Cat7a jacks 521.600Accepts 6 x SC duplex or 12 x LC duplexfibre couplers (white) 521.630Shown loaded4U overhead patching frame for 19" patch panelssaves rack space in expensive active equipment racks.Brackets enable vertical fitting under, along & overcable trays & can be angled up to 20 degrees. A 1Ucable guide can be added horizontally underneath.Accommodates up to 3 patchcord mngmnt hooks.4U overhead patching frame 345.400Patch cord Management hooks 345.401Nexans Rewards ClubWin £250 or £1000 of High Street vouchers:See page 25Cable tray:pages 167-171Head Office: T: 01279 757775 • F: 01279 653535 29 Scotland: T: 01383 435985 • F: 01383 435993

nexans cable managementRing Cable Management• Horizontal 19" cable managers for patch cables• Letterbox version has cable feed through slotsGrey 1U with 5 rings 102.105Black 1U with 5 rings102.105BKBlack 1U letterbox with 4rings 102.115BKCovered Cable Management• Horizontal 19" cable managers for patch cables• Slots top & bottom, with clip on coverGrey 1U 102.117Black 1U102.117BKGrey 2U with large bend radius 102.127Black 2U with large bend radius102.127BKBlank Filler PanelsReserves rack space for future use & keeps installationsmanageable as a divider between devices.Grey 1U filler panel 109.207Black 1U filler panel109.207BKBlack angled 1U filler panel 521.672The Nexans web site hasmany tools to help installersplan installations:See www.nexans.co.uk/lansystemssales@minitran.co.uk30www.minitran.co.uk

nexans lanmark Patch leadsLANmark Patch Leads• Cat5e leads with black boots• Cat6 and Cat6a leads have slimline black boots withblack anti tangle latch protectors• Cat7 & Cat7a GG45 leads with black boots• GG45 Cat7/7a patch lead plugs have a protrudingpart that activates the switch on the GG45 socket.• To ISO/IEC 11801 and TIA/EIA-568-B.2See explanation for GG45 sockets on page 27.LANmark5 LANmark 6/6a LANmark7/7ALANmark5 Cat5e Patch LeadsLength U/UTP grey PVC U/UTP orange LSOH Shielded grey PVC Shielded orange LSOH1Mtr 115.P2A010DU 115.P1A010OU 115.P2B010DU 115.P1B010OU2Mtr 115.P2A020DU 115.P1A020OU 115.P2B020DU 115.P1B020OU3Mtr 115.P2A030DU 115.P1A030OU 115.P2B030DU 115.P1B030OU5Mtr 115.P2A050DU 115.P1A050OU 115.P2B050DU 115.P1B050OULANmark6 Cat6 Patch LeadsLength U/UTP grey LSOH U/UTP orange LSOH Shielded grey LSOH Shielded orange LSOH1Mtr 116.P1A010DK 116.P1A010OK 11G.P1B010DK 11G.P1B010OK2Mtr 116.P1A020DK 116.P1A020OK 11G.P1B020DK 11G.P1B020OK3Mtr 116.P1A030DK 116.P1A030OK 11G.P1B030DK 11G.P1B030OK5Mtr 116.P1A050DK 116.P1A050OK 11G.P1B050DK 11G.P1B050OKLANmark6A Cat6a Patch LeadsLength shielded grey LSOH shielded orange LSOH1Mtr 11A.U1F010DK 11A.U1F010OK2Mtr 11A.U1F020DK 11A.U1F020OK3Mtr 11A.U1F030DK 11A.U1F030OK5Mtr 11A.U1F050DK 11A.U1F050OKLANmark7 Cat7 GG45 Patch Leads LANmark7A Cat7a GG45 Patch Leads1Mtr shielded orange LSOH (600Mhz) 101.239CO2Mtr shielded orange LSOH (600Mhz) 101.239EO3Mtr shielded orange LSOH (600Mhz) 101.239FO5Mtr shielded orange LSOH (600Mhz) 101.239HO2Mtr shielded orange LSOH (1000Mhz) 101.23AEO3Mtr shielded orange LSOH (1000Mhz) 101.23AFO5Mtr shielded orange LSOH (1000Mhz) 101.23AHOColoured Latch Protectors• Snaps onto the black boot on LANmark Cat6 &Cat6a UTP & shielded patch leads to colour codethe end of the lead & protect the RJ45 plug latch.Latch protector110.LP** Add the following suffix for colours:Red: R Black: K Blue: B Yellow: YWith colouredprotector on boot White: W Green: G Orange: O DarkGrey: DHead Office: T: 01279 757775 • F: 01279 653535 31 Scotland: T: 01383 435985 • F: 01383 435993

nexans enclosuresLANmark High Density Cross Connect 42U CabinetDesigned to host high density passivecross connects in data centres. Specific attention hasbeen given to cooling & space scarcity.• Open frame for excellent all round access• Management fingers each side of front profiles• Top panel with adjustable cable entries & brushes• Rear L shaped cable trays accommodate large cablebundles without interfering with hardware.• Cable troughs top & bottom• Carrying capacity 1000kgShown without front door42U 900(w) x 600(d) cabinet withall steel front/rear doors & sidepanels (2150mm height) 345.01242U 900(w)x600(d) cabinet without front/rear doors or side panels (2150mm height) 345.000Pair of doors (front & rear) 345.001Plinth 345.002Pair of narrow doors 345.004Pair of lateral panels 345.005Grounding kit 345.006Side to side baying kit 345.007Back to back baying kit 345.010Pair of central lateral back to back panels 345.011Jacking feet (4) & adapter plates 345.008Quickmount 42U CabinetFast assembly flat pack enclosure may be assembledby one person in about 20 minutes.• Frameless structure for all round access• Automated earthing system• Glass mixed tinted lockable front door• Lockable opening rear & side doors42U 800(w) x 800(d) enclosure 340.003As above without side doors 340.103Shelf with 4 fixing points (70kg load) 340.163Sliding shelf (30kg load) 303.164Adjustable feet (pack of 4) 333.165Patching rings (pack of 8) 343.206Roof mount fan 203.171Plinth 340.185Nexans Visio templates can now be downloaded free at www.nexans.co.uk/lansystems.Create fast professional cabinet layout drawings.sales@minitran.co.uk32www.minitran.co.uk

nexans Maritime & IndustryFor harshindustrial, marine, oil & gasenvironments.LANmark Maritime & Industry CableLANmark Maritime cable (500Mtr reels)Cat7 LSOH S/FTP Lloyds blue N100.376Cat7 mud resistant S/FTP light grey N10G.003Cat7a SHF1 LSFROH DNV light grey N10M.002LANmark Industry cable (Cat6/7 on 500Mtr reels)Cat6 LSOH+PE SF/UTP black external N10I.004Cat7 PUR S/FTP blackN10I.002Fibre TBX 6 core M/Mode OM3 PUR black N165.922Industry cable:N10I.004 has a black sheath which is removable withrip cord revealing an inner orange LSOH sheath.With overall foil & braid.N10I.002 has a polyurethane compound for superiorabrasion & tear resistance. Also has good resistanceto ageing and UVs. Performs well in contact with oils& greases. Oil resistant IRM 902. Individually screenedpairs with an overall braid.N165.922 fibre cable with enhanced tight buffering,aramid yarns re-inforcement. Resistant to chemicals& petrochemicals, large temperature range. May beinstalled in ducts which are occasionally flooded.Maritime cable:N100.376 cable is Lloyds certified for marine useN10M.002 oil resistant & suitable for on board ship& sea movable constructions. Uses SHF1 compoundaccording to IEC 60092-359 sheathing materials forshipboard telecommunications cable.N10G.003 has a double sheath with a removable mudresistant outer sheath for when the cable penetratesareas where fire resistance is necessary.LANmark Maritime GG45 Cat7 JackHeavy duty GG45 foroptimal resistanceto corrosion. Snapsinto modular panels& modules. For anexplanation of GG45technology seepage 27N42M.730LANmark Maritime Modular Patch Panel24 port 1U sliding panel where rigidity is required forsevere vibrations. Accepts LANmark snap in jacks.N52M.001LANmark Industry DIN Rail ModulesSuitable for a 35mm DIN rail system. Supplied withLANmark snap in tool-less jacks.DIN rail module with 1 xCat6 shieldedDIN rail module with 1 xCat6a shieldedDIN rail module with 1 xCat7 shieldedSide cover for Cat6/6a DIN rail moduleSide cover for Cat7 DIN rail moduleN20I.000N20I.004N20I.001N20I.002N20I.003Head Office: T: 01279 757775 • F: 01279 653535 33 Scotland: T: 01383 435985 • F: 01383 435993

nexans Maritime & IndustryLANmark Industry DIN Rail Mount iConnect BoxCan be directly fitted onto 35mm DIN rail or screwedon the side onto a wall. Accepts fibre splice trays.Robust metal body, IP20 with dust protecting covers6 position iConnect box N42I.101Splice Cassette, 6 splice protection holder N42I.102Splice cassette coverN42I.1046 position box accepts LANmark snap inRJ45, GG45 & fibre modules shown onpages 26 & 28.LANmark Industry Cat6 & Cat6a OutletSupplied with two Cat6 or Cat6a shielded LANmarkjacks. For wall mounting with cable entry fromabove & below.• IP65/67 protection level (dust/liquids)• Automatic shutter mechanism• Used with patchcords shown below.Outlet with 2xCat6 jacksOutlet with 2xCat6a jacksN42I.001N42I.002LANmark Industry Cat6 Patch CordsDesigned to be used with the above IP65/67 outlet.Provides a secure connection free of liquids & dust.The IP67/IP20 end of the patchcord features a push/pull boot which provides the IP67 protection as wellas a locking system for the cords. The cords can onlybe removed from the outlet by pulling the boot &not by pulling on the cable. Patch leads are shielded.1.5Mtr Cat6 yellow IP67 - IP203Mtr Cat6 yellow IP67 - IP205Mtr Cat6 yellow IP67 - IP2010Mtr Cat6 yellow IP67 - IP2010Mtr Cat6 yellow IP67 single endedN10I.E34DJN10I.E34FJN10I.E34HJN10I.E34OJN10I.E64OJThe Nexans web site hasmany tools to help installersplan installations:See www.nexans.co.uk/lansystemssales@minitran.co.uk34www.minitran.co.uk

Panduit introduction & contentswww.panduit.comPanduitEstablished since 1955 with sales of $500million last year. Panduit employs 3,500 peopleworldwide.NetkeyPanduit's mid market Cat5e/6 UTP solution.Netkey's affordability makes it an attractiveproposition to installers looking for leadingbrand value with Panduit reliability &performance.15 year system warranty via approvedinstallation partners.Mini-ComHigh performance Cat5e, Cat6 & Cat6a UTP& shielded system with fibre & AV standard &high density solutions. Panduit's "tool-less"jack is at the heart of this modular system. Anextensive range of cable management, zonecabling, pre-terminated solutions, infrastructuremanagement software & hardware.25 year system warranty via approvedinstallation partners.Racks & EnclosuresTwo & four post open rack systems & enclosuresoffers high density cabling & innovative thermalmanagement solutionsCable RoutingRoute & manage cabling along walls, overheador underfloor with Panduit's T70, FibreRunner,GridRunner & Wyr-Grid systems.Panduit is a leading physicalinfrastructure partner for Cisco and workswith Cisco engineers to develop optimal physicallayer solutions for their networking products.Panduit section contentsNetkey cable & jacks 36Netkey tooling, wallplates & modules 37Netkey surface boxes 38Netkey patch panels 38 - 39Netkey patch leads 39Pan-Net cable 40Mini-Com jacks 40Mini-Com tooling 41Mini-Com Couplers & AV modules 41Mini-Com wallplates & modules 42Mini-Com surface boxes & blanks 43Mini-Com consolidation points 44Mini-Com patch panels 44 - 46110 tower system 46Quicknet pre-terminated Cat6/6a 47Horizontal cable management 48 - 49Opticom fibre couplers & panels 50 - 51Opticam pre polished connectors 51Field polish fibre connectors 51Fibre cable & fibre patch leads 52Quicknet pre-terminated fibre 522 & 4 post open rack systems 53PatchRunner cable mngmnt system 54Net-Access & Net-serv cabinets55 - ß56Pre-configured cabinets 57In cabinet cable management 58Cool boots & cabinet grounding 58Mini-Com patch leads 5910G direct attach leads 60Quicknet plug pack 60RJ45 plugs & tooling 60Port Blockout & Lockin devices 61LS8 Printer & cable ties 62Cable bundle organiser 63Gridrunner & FibreRunner cable routing 172Wyr-Grid overhead cable tray 169T70 trunking 64Head Office: T: 01279 757775 • F: 01279 653535 35 Scotland: T: 01383 435985 • F: 01383 435993

panduit netkey systemNetkey is Panduit's mid market solution. Its affordability makes Netkey an attractive proposition to installerslooking for value from a leading manufacturer combined with Panduit reliability & performance. Available witha 15 year system warranty via approved installer partners.Netkey Cat5e & Cat6 UTP Cable• Compliant with TIA 568-B.2 & IEC 61156-5• 24 AWG solid copper cable• Cross divider in Cat6 separates pairs for increasedperformance• Cable Mtr marked from 305Mtrs downwardsSee our cable selection guide & explanation of thenew cable types e.g. U/UTP, F/UTP etc on page 85Cat5e U/UTP Solid Cable (305Mtr boxes)Cat5e PVC U/UTP greyNUC5C04IG-CECat5e PVC U/UTP blueNUC5C04BU-CECat5e LSOH U/UTP violetNUL5C04VL-CECat5e LSOH U/UTP blueNUL5C04BU-CECat6 U/UTP Solid Cable (305Mtr boxes)Cat6 PVC U/UTP greyNUC6C04IG-CECat6 PVC U/UTP blueNUC6C04BU-CECat6 LSOH U/UTP violetNUL6C04VL-CECat6 LSOH U/UTP blueNUL6C04BU-CENetkey Cat5e UTP Tool-Less Jack• Fast termination without punchdown tooling• Rear cable entry• Optional tool (CJT) ensures conductors are fullyterminated• Transparent termination cap provides strain relief& controls bend radiusCat5e UTP tool-less jackOptional termination toolNK5E88M**YCJTInsert cable into capTrim conductorsPull conductors throughPush cap downVarious coloursavailable. Substitute** in the partnumber withrequired code.Used in Netkey modular panels, moduleswallplate kits & surface boxes.Black: BLWhite: AWBlue: BUGreen: GRYellow: YLOrange: OERed: RDNetkey Cat5e & Cat6 UTP 110 Punchdown Jacks• Ultra low profile, just 29.5mm overall depthincluding retention cap• 110 punchdown blocks, rear cable entry• Retention cap provides additional strain reliefCat5e UTP punchdown jackCat6 UTP punchdown jackNKP5E88M**YNK688M**YJackRapid tool terminates Netkeypunchdown jacks 8 x faster thannormal methods. See next page.Used in Netkey modular panels, moduleswallplate kits & surface boxes.Various coloursavailable. Substitute** in the partnumber withrequired colour.Black: BLWhite: AWBlue: BUGreen: GRYellow: YLOrange: OERed: RDsales@minitran.co.uk36www.minitran.co.uk

panduit netkey systemNetkey JackRapid Termination Tool• Used with Netkey Cat5e & Cat6 punchdown UTPjacks.• Easy to use, seats & cuts all wires at once• Increases productivity - 8 times faster• Consistent termination every time• Built in cable stripperJackRapid toolReplacement blade headJR-PAN-2JR-PAN-2-HDress all 4 pairs.Ensure jack issecurely inserted.Pull trigger &remove excess wire.Wires will beseated and cut.Release handle &remove jack from tool.Netkey Wallplate KitsAccepts all Netkey jacks. With label field above ports.Shuttered Wallplate Kits:Single gang kit with wallplate & 2 xangled shuttered portsNKUKS2SAWDouble gang kit with wallplate & 4 xangled shuttered portsNKUKS4SAW-2GNon Shuttered Wallplate Kits:Single gang kit with wallplate & 2 xangled non-shuttered portsNKUKS2AWDouble gang kit with wallplate & 4 xangled non-shuttered ports NKUKS4AW-2GNetkey LJ6 ModuleNetkey Blank ModuleAccepts all Netkey jacks. With label field above ports.LJ6 37x25mm shuttered moduleAngled LJ6 37x25mmshuttered moduleNK6CSAW-XNK6CSSAW-XFor unused ports in wallplates, surface boxes andmodular panels.White blankBlack blankNKBMWH-XNKBMBK-XHead Office: T: 01279 757775 • F: 01279 653535 37 Scotland: T: 01383 435985 • F: 01383 435993

panduit netkey systemNetkey Surface Mount Boxes• Accepts all Netkey jacks.• With mounting screws, breakouts & adhesive tape• Label window on 4 & 6 port versions2 port NK2BXIW-AY4 port NK4BXIW-AY6 port NK6BXIW-AYNetkey Cat5e & Cat6 110 Punchdown PanelsMetal panel• 110 punchdown blocks with cable retainers on rear• With cable ties• Low cost punch down panels representingexcellent value.Metal panel with write on port label fieldCat5e 24 port 1U UTPNK5EPPG24Cat5e 48 port 2U UTPNK5EPPG48Cat6 24 port 1U UTPNK6PPG24Cat6 48 port 2U UTPNK6PPG48Plastic panelPlastic panel with labels above portsCat5e 24 port 1U UTPNK5EPP24PCat5e 48 port 2U UTPNK5EPP48PCat6 24 port 1U UTPNK6PP24PCat6 48 port 2U UTPNK6PP48PStrain relief barPivots to allow easy access to rear ofpanel (See full details on next page) SRBPBLNetkey Modular Patch PanelsMetal panel with "Write on" port label field• Accepts all Netkey snap in copper, fibre &multimedia jacks• Two versions available: Metal panel with write onarea for port identification or plastic panel withlabel fields above each group of ports.Metal panel with write on port label field24 port 1U modular panel NKPP24FMY48 port 2U modular panel NKPP48FMYPlastic panel with labels above portsLabelling: see pages 94-96Plastic panel with labels above ports24 port 1U modular panel NKPP24P48 port 2U modular panel NKPP48PStrain relief barPivots to allow easy access to rear ofpanel (See full details on next page) SRBPBLsales@minitran.co.uk38www.minitran.co.uk

panduit netkey systemNetkey Angled Patch Panels• Accepts all Netkey snap in copper, fibre &multimedia jacks• Standard & high density versions• Numbered ports above each group of 4 ports &write on areas below.24 port 1U angled NKPPA24FMY48 port 2U angled NKPPA48FMY48 port 1U angled high density NKPPA48HDYFor use with PatchRunner Rack Systemon page 54Pivoting Strain Relief Bar• May be used with all Panduit Netkey or Mini-Com19" patch panels• Pivot mechanism allows easy access to rear of panel.Strain Relief BarSRBPBLNetkey Cat5e & Cat6 UTP Patch Leads• Cat5e PVC leads unbooted.• Cat6 PVC with integral slimline strain relief boot• With anti tangle RJ45 plug latches• 24 AWG cable. Meets TIA/EIA-568-C.2Cat5e** For colouredleads add the partnumber suffix. Stdleads are off white.Cat6Off White: No suffixBlue: BE Yellow: YWGreen: GN Red: RDCat5e U/UTPCat6 U/UTP1Mtr NK5EPC1M** NK6PC1M**2Mtr NK5EPC2M** NK6PC2M**3Mtr NK5EPC3M** NK6PC3M**4Mtr NK5EPC4M** NK6PC4M**5Mtr NK5EPC5M** NK6PC5M**Head Office: T: 01279 757775 • F: 01279 653535 39 Scotland: T: 01383 435985 • F: 01383 435993

panduit mini-com cable and jacksMini-Com is a high performance Cat5e - Cat6a system offering standard & high density solutions, anextensive range of cable management, labelling, cable routing and racks. Optimum performance &low installed cost. Available with a 25 year system warranty via partner programme.Pan-Net Cat5e, Cat6 & Cat6a CableCat5e cable (305Mtr boxes)Cat5e U/UTP LSOH white PUL5504WH-EYCat5e F/UTP LSOH dark grey PFL5504DG-ECat6 cable (U/UTP in 305Mtr box,F/UTP on 500Mtr reel)Cat6 U/UTP LSOH white PUL6004WH-EYCat6 F/UTP LSOH dark grey PFL6004DG-KDCat6a cable (U/UTP & F/UTP on 305Mtr reel,U/FTP on 500Mtr reel)Cat6a U/UTP LSOH white PUL6A04WH-EGCat6a U/FTP LSOH white PUFL6X04WH-KDCat6a F/UTP LSOH white PFL6X04WH-CEGHigh performance cable exceeds the relevant ANSI/TIA & IEC standards. All cable is mtr marked from305/500 mtrs downwards.Cat5e cable:• For 10/100/1000Base-T (Gigabit)• 24 AWG solid copper cableCat6 cable:• For 10/100/1000Base-T & 10GBase-T (10 Gig) overlimited distance -see standards• Central cross pair divider improves performance• 23 AWG solid copper cableCat6a cable:• Supports higher frequency 10 Gigabit• U/UTP cable has a matrix tape surrounding all 4pairs to suppress alien crosstalk• Central cross pair divider improves performance• 23 AWG solid copper cableSee our cable selection guide and explanation of the new cable types e.g. U/UTP, F/UTP etcon page 85Mini-Com TX Cat5e, Cat6 & Cat6a Tool-Less Jack• Speeds installation time by up to 25%. No need tountwist cable pairs.• Colour coded jacks for port/zone identification• Shielded versions automatically grounded &bonded when used with metal panels• Can be re-terminated a maximum of 20 times• Termination cap provides strain relief & helpscontrol cable bend radius** For UTP jackssubstitute the **in the part numberwith requiredcolour.Black: BLWhite: AWBlue: BURed: RDYellow: YLOrange: OEGreen: GNViolet: VLCat5e UTP jackCat5e shielded jackCat6 UTP jackCat6 shielded jackCat6a UTP jackCat6a shielded jackCJ5E88TG**CJS5E88TGCJ688TG**CJS688TGCJ6X88TG**CJSX688TGOptional tooling page 41Compatible with Mini-Com modular panels, modules, wallplate kits, surface boxes &consolidation points.sales@minitran.co.uk40www.minitran.co.uk

panduit mini-com tooling & AV modulesMini-Com TG Termination Tool• Seats & flush cuts cable & assembles wire cap intwo quick cycles• Terminates UTP & shielded jacks in 25% less timecompared to traditional methods• Consistent termination each timeTG termination toolTGJTMini-Com Termination ToolMini-Com Cat5e & Cat6 CouplersIndividually terminates Mini-Com TX jacksTermination toolEGJTUTP couplers snap into Mini-Com modules, wallplatekits, modular panels & consolidation points.** Substitute with requiredcoupler colour: White: IW Black: BKCat5e UTP couplerCat6 UTP couplerCC5E88**CC688**Mini-Com Audio Visual ModulesSnaps into Mini-Com modules, modular panels, surface boxes and consolidation points.** Substitute with required module colour:White: IW Black: BKUSB 2.0 A - A couplerCMUSBAA**F type 75ohm couplerCMF**HDMI 1.3 A - A couplerCMHDMI**BNC 75ohm couplerCMBA**RCA 110 punchdown (red)RCA 110 punchdown (yellow)RCA 110 punchdown (white)RCA coupler (red)RCA coupler (yellow)RCA coupler (white)CJRR**CJRY**CJRW**CMRPR**CMRPY**CMRPW**SVGA high density D15 female(screw terminal termination)S-Video 110 punchdownS-Video couplerBinding post with black stripeBinding post with red stripeCMD15HD**CJSV**CMSVC**CMBPB**YCMBPR**YFor AV productssee pages 113-129Head Office: T: 01279 757775 • F: 01279 653535 41 Scotland: T: 01383 435985 • F: 01383 435993

panduit mini-com wallplates & modulesMini-Com Shuttered Wallplate Kits• With integral labels field• Wallplate with angled shuttered moduleAccepts Mini-Com jackson page 40.Single gang kit with wallplate& 2 x angled shuttered portsDouble gang kit with wallplate& 4 x angled shuttered portsCFPUKS2SAWYCFPUKS4SAW-2GYMini-Com Wallplates & ModulesWallplates & modules available individually ratherthan in the kits shown above. Ideal if using awallplate with non shuttered modules.ModulesAngled 2 port unshuttered module CHS2AW-XAngled 2 port shuttered module CHS2SAW-XFlat unshuttered 2 port module CHF2AW-XAngled recessed unshuttered2 port module CHSR2AW-X50x25mm flat shuttered module(not for use in Panduit wallplates) CM6CESAW-XAccepts Mini-Com jackson page 40.WallplatesSingle gang wallplateDouble gang wallplateCBUKAWYCBUKAW-2GYMini-Com One Piece WallplatesNon-shuttered sloped single gang wallplates.2 port single gang CFPUKS2AWY3 port single gang CFPUKS3AWYAccepts Mini-Com jacks on page 40 &audio visual jacks on page 41.Mini-Com LJ6 ModulesAccepts Mini-Com jacks. Used in floorboxes.LJ6 37x25mm shuttered flat moduleLJ6 37x25mm non-shutteredflat moduleLJ6 37x25mm shutteredangled moduleCM6CSAW-XCM6CAW-XCM6CSSAW-Xsales@minitran.co.uk42www.minitran.co.uk

panduit mini-com blanks & surface boxesMini-Com Blank ModulesFills unused positions in wallplates, patch panels,surface boxes, consolidation points & all Mini-Comhardware.White blank moduleBlack blank moduleCMBAW-XCMBBL-XMini-Com Surface Mount Boxes• With breakouts, cable tie slots & adhesive backing• ABS white plastic• Accepts all Mini-com jacks (shown loaded).• Multimedia versions have an internal spool tosecure excess cable around spool.Boxes shown loaded with jacksSurface mount boxes:1 port 23.2(h)x26.3(w)x48.1mm(d) CBX1AW-A2 port 27.3(h)x49.5(w)x92.7mm(d) CBX2AW-AY2 port 17.8(h)x44.8(w)x61.8mm(d) CBXJ2AW-AY4 port 27.0(h)x73.6(w)x114.3mm(d) CBX4AW-AY4 port 23.1(h)x80.0(w)x80.0mm(d) CBXC4AW-AY6 port 26.3(h)x125.7(w)x96.2mm(d) CBXD6AW-AY12 port 26.3(h)x145.0(w)x138.5mm(d) CBX12AW-AYMultimedia surface mount boxes:6 port 25.0(h)x119.4(w)x169.2mm(d) CBXF6AW-AY12 port 45.8(h)x119.4(w)x169.2mm(d) CBXF12AW-AYMini-Com MuTOA 6 Port Outlet BoxShown withmodules &jacks (suppliedseparately).A 6 port Multi User TelecommunicationsOutlet Assembly when used with 3 x twin angledmodules (CHS2SAW-X or CHS2AW-X) shown onpage 42.• Provides multimedia flexibility to open officeenvironments• White polycarbonate• Expandable cable entry allows various cable entrysizes from 17.7mm - 21mm• With 2 x cable ties, heat shrink tubing, adhesivetape & screws to secure cover to base6 Port Outlet Box CM6PWHThe Panduit Customer Briefing Centre (CBC) in London by Liverpool Ststation, has a product display area and meeting rooms. It is an ideal settingto demonstrate the Panduit system. Contact us for details.Head Office: T: 01279 757775 • F: 01279 653535 43 Scotland: T: 01383 435985 • F: 01383 435993

panduit mini-com consolidation points & panelsMini-Com Consolidation Point Boxes• Can be used under floor or wall mounted• 16-gauge steel for durability• Top & bottom cable access• Fibre conversion kit includes spools, 2 x labels &spiral cable wrapAccepts all Mini-Com jacks24 port CUFMB24BL48 port CUFB48BLFibre conversion kitCUFF-KITMini-Com Punchdown Consolidation Point EnclosureWall mount aluminium consolidation enclosure.Punch down onto the base, connect block &terminate to the connecting block.• Can be wall mounted horizontally/vertically• 87.4mm(D)x240.5mm(W)x335.8mm(H)• Top & bottom cable entries• Keyless slot lock keeps enclosure closedShown loaded with baseEmpty enclosureWMCPECat6 UTP 24 pair punchdown base GPB24-XCat6 UTP 144 pair punchdown base GPB144-XCat6 UTP 4 pair connecting block GPCB4-XY4 pair punchdown tool GPDTMMini-Com Metal Modular Patch Panels• With write on areas for port identification• Ports in groups of four• Accepts all Mini-Com jacks24 port 1U CP24BLY48 port 2U CP48BLY24 port 1U with rear cable management CP24WSBLY48 port 2U with rear cable management CP48WSBLYMini-Com "Faceplate" Style Modular Patch Panels• Label window above each group of 4/6 ports• Each group of ports in a plastic faceplate styleremovable module allowing front access to panelFor Mini-Com UTP, multimedia & fibre jacks24 port 1U with label windows(ports in groups of 4)CPPL24WBLY48 port 2U with label windows(ports in groups of 4)CPPL48WBLY24 port 1U with label windows(ports in groups of 6)CPPL24M6BLY48 port 2U with label windows(ports in groups of 6)CPPL48M6BLYsales@minitran.co.uk44www.minitran.co.uk

Panduit mini-com panelsMini-Com High Density Modular PanelsFor Mini-Com UTP, multimedia & fibre jacks.• With plastic faceplate style modules allowing jacksto be simultaneously removed from panel32 port 1U CPP32WBLY48 port 1U CPP48HDWBLY72 port 2U CPP72WBLYMini-Com Angled Modular Patch PanelsAllows cables to run out to PatchRunner sidemanagement rather than horizontal cablemanagement saving rack space.Metal styleMetal style:• With write on areas for port identification• Ports in groups of four• Accepts all Mini-Com jacksLabel window styleLabel window style:• Label window above each group of 4 ports• Each group of ports in a plastic faceplate styleremovable module allowing front access to panel• For Mini-Com UTP, multimedia & fibre jacksUsed with PatchRunner systemon page 54.High densityHigh density:• 48 ports in 1U or 72 ports in 2U• 72 port 2U (only) with label windows• For Mini-Com UTP, multimedia & fibre jacks24 port 1U (metal style) CPA24BLY48 port 2U (metal style) CPA48BLY24 port 1U + label windows CPPLA24WBLY48 port 2U + label windows CPPLA48WBLY48 port 1U high density CPPA48HDWBLY72 port 2U high density CPPLA72WBLYMini-Com Wall Mount Panel & Bracket12 port modular mini panel. Attaches to WB89Dbracket allowing the panel to be fixed directly to awall rather than being mounted in an enclosure.For Mini-Com UTP, multimedia & fibre jacks.12 port 1U panel CPP12WBLBracket for panelWB89DHead Office: T: 01279 757775 • F: 01279 653535 45 Scotland: T: 01383 435985 • F: 01383 435993

panduit mini-com panels & 110 systemMini-Com 110 Punchdown Panels• 110 punchdown blocks with cable retainers on rear.• Write on area allows port identification• With cable tiesCat5e 24 port 1U UTPDP245E88TGBLCat5e 48 port 2U UTPDP485E88TGBLCat6 24 port 1U UTPDP24688TGBLCat6 48 port 2U UTPDP48688TGBLRear strain relief bar (Pivots to allowaccess to back of panel) see page 39.SRBPBLCat6a 24 port 1U UTPCat6a 48 port 2U UTPDP246X88TGBLDP486X88TGBLMini-Com Angled 110 Punchdown PanelsUsed with PatchRunner system on page **. Allowscables to run out to PatchRunner side mngmt ratherthan horizontal cable mngmt saving rack space.• 110 punchdown blocks with cable retainers on rear.• Write on area allows port identification• With cable tiesCat6 24 port 1U UTPCat6 48 port 2U UTPCat5e 24 port 1U UTPDPA245E88TGY Cat6a 24 port 1U UTPCat5e 48 port 2U UTPDPA485E88TGY Cat6a 48 port 2U UTPRear strain relief bar (Pivots to allow access to back of panel)DPA24688TGYDPA48688TGYDPA246X88TGYDPA486X88TGYSRBPBL110 Pan-Punch System 110 Connectors & Patch CablesPAN-PUNCH 110 Tower systems provide acomplete, high density cross-connect system withbuilt in cable management. These wall mountedtower systems include jumper troughs and wiringblocks required to complete each 25 pair strip.Labels are included. The jumper troughs providecable management for patch cords and theirexclusive rounded corners help maintain cablebend radius requirements. CAT6 110 system alsoavailable, please call our sales office for details.300 Pair Tower Includesall components required900 Pair Tower Includesall components requiredRivet Installation Tool5-Pair Punch-Down Tool.P110KT3004P110KT9004P110RTPDT110M110 Field Terminable CAT5e Connectors1 Pair 110 Connector P110PC1-X2 Pair 110 Connector P110PC2-X3 Pair 110 Connector P110PC3-X4 Pair 110 Connector P110PC4-XFeatures a clear cap to ensure correct wire sequenceand connection orientation. Connectors are fieldterminable.110 CAT5e Patch Cables1 Mtr P110PC4IG1M2 Mtr P110PC4IG2M3 Mtr P110PC4IG3M5 Mtr P110PC4IG5M4 Pair Cable Assemblies with 110 connectors oneach end.CAT6 110 system also available. Call our office.sales@minitran.co.uk46www.minitran.co.uk

panduit quicknet pre-terminated systemQuickNet is a pre-terminated cabling solution that is fast & simple to install &offers a number of advantages: Standard lengths are available from stock.• Quick network deployment & increased reliability.• Can be installed in 75% less time than fieldtermination methods.• 100% factory tested pre-terminated assembliessupplied with test results.• Angled, flat & high density panels• Copper, fibre & AV solutions availableQuickNet Pre-Terminated Cat6 & Cat6a Panel - Panel Cassettes• Cat6 UTP & Cat6a SFTP shielded versions• Cassettes easily snap in and out of panels/adapters (below)Cat6 6 port black UTP cassette withwhite LSOH cableCat6a 6 port shielded cassette withgrey LSOH cableQCLXCLCLXX*QHLXCLCLXX*Cat6 UTP cassettes: Substitute the * at the end of the part number with the required length:5Mtr = 5M0, 7.5Mtr = 7M5, 10Mtr = 10M0, 12.5Mtr = 12M5, 15Mtr = 15M0, 17Mtr = 17M5, 20Mtr = 20M0,22.5Mtr = 22M5, 25Mtr = 25M0, 27.5Mtr = 27M5, 30Mtr = 30M0.Cat6a shielded cassettes: Substitute the * at the end of the part number with the required length:10Mtr = 10M0, 20Mtr = 20M0, 30Mtr = 30M0QuickNet Panels & Panel Adaptor ModulesPanelAdapter modules & label kit6 port adapter module QPPABLBlank adapter moduleQPPBBLLabel kit for 24port panelQPPLC24Patch panels for UTP cassettes24 port 1U flat modular panel QPP24BL48 port 1U flat high densitymodular panelQPP48HDBL24 port 1U angled modular panel QAPP24BL48 port 1U angled high densitymodular panelQAPP48HDBLAdapter module• Adapter modules snap into panels & then acceptsnap in cassettes.Patch panels for shielded cassettes24 port 1U flat modular panel QSP24BL48 port 1U flat high densitymodular panelQSP48HDBL24 port 1U angled modular panel QASP24BL48 port 1U angled high densitymodular panelQASP48HDBLAdditional lengths, configurationsand QuickNet fibre system also available.Contact us for details.QuickNet plug packs allow multipleRJ45 plug cables to be simultaneouslyconnected / disconected. See page 60Head Office: T: 01279 757775 • F: 01279 653535 47 Scotland: T: 01383 435985 • F: 01383 435993

panduit cable managementPatchLink Horizontal Cable ManagementNetManager Horizontal CableManagement• Removable front cover hinges up or down• Pass through holes for front to rear cabling &rounded edge fingers for bend radius control• Ideal for Cat5e & Cat6 applications• Lightweight durable plastic constructionFront Only Management1U Front 38(H)x76mm(D)1U Front 38(H)x51mm(D)2U Front 76(H)x76mm(D)2U Front 76(H)x76mm(D)with 2 bend radius control clips &extended width front coverFront & rear management1U front & rear38(H)x76mm(D): Front25(H)x127mm(D): Rear1U front & rear38(H)x51mm(D): Front25(H)x127mm(D): Rear2U front & rear76(H)x76mm(D): Front51(H)x127mm(D): Rear2U front & rear76(H)x76mm(D): Front51(H)x127mm(D): Rear.with 2 bend radius control clips &extended width front coverWMPFSEWMPLFSEWMPF1EWMPHF2EWMPSEWMPLSEWMP1EWMPH2E• Removable front cover hinges up or down 180degrees allowing hands free access• Integral wire retainers hold cable in place for easymoves, adds & changes• Pass through holes for front to rear cabling &rounded edge fingers for bend radius control• Ideal for Cat5e & Cat6 applications• Lightweight durable plastic construction1U front only 38(H)x76mm(D)2U front only 76(H)x76mm(D)2U front & rear:76(H)x76mm(D) - Front51(H)x127mm(D) - RearNCMHF1NCMHF2NCMH2NetManager Horizontal High Capacity Cable Management• Removable front cover hinges up or down 110degrees• Rear cable management utilises open D rings forgreater accessibility• Pass through holes for front to rear cabling& rounded edge fingers for bend radius control• Wide front finger openings easily accommodateCat6 & Cat6a cable• Lightweight durable plastic constructionFront only1U 44(h) x 157mm (d) NMF12U 88(h) x 157mm (d) NMF23U 133(h) x 157mm (d) NMF34U 177(h) x 157mm (d) NMF4Front & Rear1U 44(h) x 332mm (d)2U 88(h) x 332mm (d)3U 133(h) x 332mm (d)4U 177(h) x 332mm (d)NM1NM2NM3NM4sales@minitran.co.uk48www.minitran.co.uk

panduit Cable managementHigh Capacity Horizontal Cable Management• Manage cables on switches with vertical cards• Curved cable management fingers support cables asthey transition to vertical pathway• Steel hinged cover• Cable pass through holes top & rear204 deep 2U NCMHAEF2204 deep 4U NCMHAEF4250 deep 2U PEHF2250 deep 3U PEHF3250 deep 4U PEHF4D Ring Horizontal Cable Management• Steel panel with 4 x plastic D rings• Pass through holes for front to rear cabling• 1U version with 38x76mm D rings• 2U version with 76x76mm D rings1U with 4 D rings2U with 4 D ringsCMPHF1CMPHF2Blank Filler PanelsReserves rack space for future use. Angled versionsused with the PatchRunner system on page 54.Flat 1UFlat 2UFlat 4UAngled 1UAngled 2UDPFP1DPFP2DPFP4CPAF1BLCPAF2BLIP monitoredPDUs: page 229Head Office: T: 01279 757775 • F: 01279 653535 49 Scotland: T: 01383 435985 • F: 01383 435993

panduit opti-com fibre panelsMini-Com Fibre Coupler ModulesUsed in Mini-Com hardware.Simplex & other coupler versions available.For ST & SC/LC OM1/2 versions substitute the **with the required module colour:White: AWBlack: BLST M/Mode OM1/2SC duplex M/Mode OM1/2SC duplex M/Mode OM3/4 (Aqua)SC duplex S/Mode OS1 (Blue)LC duplex M/Mode OM1/2LC duplex M/Mode OM3/4 (Aqua)LC duplex S/Mode OS1 (Blue)CMST**CMDBUSC**CMDAQSCBLCMDBUSCZBUCMDJLC**CMDJAQLCBLCMDJLCZBUOpticom Fibre Rear TraysUsed with modular panels and couplers (above) orwith adapter panels & FAP fibre panels (below).Angled trays used with PatchRunner system page 54.• Supplied with cable ties, spools, strain reliefbracket, ID/Caution labels• Depth of 283.5mm• Removable top cover for access1U fixed flat rear tray2U fixed flat rear trayFMT1FMT21U fixed angled rear tray2U fixed angled rear trayFMT1AFMT2AOpticom Fibre Adaptor Panels1U flat adapter panel2U flat adapter panel1U angled adapter panel2U angled adapter panelBlank FAP panelLC OM1 (6 x duplex)LC OM2 (6 x duplex)LC OM3/4 (6 x duplex)LC OS1/2 (6 x duplex)LC OM1 (8 x duplex)LC OM2 (8 x duplex)LC OM3/4 (8 x duplex)LC OS1/2 (8 x duplex)CFAPPBL1CFAPPBL2CFAPPBL1ACFAPPBL2AFAPBYFAP6WEIDLCFAP6WBLDLCFAP6WAQDLCZFAP6WBUDLCZFAP8WEIDLCFAP8WBLDLCFAP8WAQDLCZFAP8WBUDLCZUsed with FMT rear trays (above). FAP couplerpanels fix to front of CFAPP adapter panels & thenattach to FMT series rear trays. 1U adapter panelshold up to 4 FAP panels & 2U up to 8.Other coupler panels also available. Please contactour sales office.LC OM1 (12 x duplex)LC OM2 (12 x duplex)LC OM3/4 (12 x duplex)LC OS1/2 (12 x duplex)SC OM1 (4 x duplex)SC OM2 (4 x duplex)SC OM3/4 (4 x duplex)SC OS1/2 (4 x duplex)SC OM1 (6 x duplex)SC OM2 (6 x duplex)SC OM3/4 (6 x duplex)SC OS1/2 (6 x duplex)FAP12WEIDLCFAP12WBLDLCFAP12WAQDLCZFAP12WBUDLCZFAP4WEIDSCFAP4WBLDSCFAP4WAQDSCZFAP4WBUDSCZFAP6WEIDSCFAP6WBLDSCFAP6WAQDSCZFAP6WBUDSCZsales@minitran.co.uk50www.minitran.co.uk

panduit opticom fibre systemOpticom Pre Loaded Fibre Panels• Pre loaded sliding panels• 1U height, 308mm depth• Silk screened white areas for labelling• With two cable management spools, grommets,cable glands & cable ties• Multiple cable entry pointsOM1 multimode panels6 x SC duplex OM1 (12 port) FD1W6EIDSC12 x SC duplex OM1 (24 port) FD1W12EIDSC12 x LC duplex OM1 (24 port) FD1W12EIDLC24 x LC duplex OM1 (48 port) FD1W24EIDLCOM2 multimode panels6 x SC duplex OM2 (12 port) FD1W6BLDSC12 x SC duplex OM2 (24 port) FD1W12BLDSC12 x LC duplex OM2 (24 port) FD1W12BLDLC24 x LC duplex OM2 (48 port) FD1W24BLDLCOM3/4 multimode panels6 x SC duplex OM3/4 (12 port) FD1W6AQDSC12 x SC duplex OM3/4 (24 port) FD1W12AQDSC12 x LC duplex OM3/4 (24 port) FD1W12AQDLC24 x LC duplex OM3/4 (48 port) FD1W24AQDLCOS1/2 singlemode panels6 x SC duplex OS1/2 (12 port) FD1W6BUDSCZ12 x SC duplex OS1/2 (24 port) FD1W12BUDSCZ12 x LC duplex OS1/2 (24 port) FD1W12BUDLCZ24 x LC duplex OS1/2 (48 port) FD1W24BUDLCZOptiCam Pre-Polished Fibre ConnectorsTermination kit has everything needed toterminate Opticam connectors: Includescable strippers, alcohol, screwdriver, safetyglasses, tweezers, kevlar sheers, workmat,cleaver tool, termination tool, wipes, swabs& marker pen. All in a carry case. FCAMKITIf you already have a fibre cablestripper, precision cleaver, cleaningfluid & lint free wipes then you onlyneed to buy this upgrade kit whichincludes the termination tool. FPPKIT-CVYFast termination eliminates field polishing &adhesive. For tight buffered cable only.• Terminate in less than half the time of field polishconnectors.• Re-termination capability• Easy to use tooling allows inspection ofterminated fibre for optimum results.Fibre Stripper MT-CFS-2 page 140Precision Cleaver MT-10010 page 140Cleaning fluid MT-POC03M page 144Lint free wipes LINFW page 144SC simplex 62.5/125 OM1SC duplex 62.5/125 OM1SC simplex 50/125 OM2SC duplex 50/125 OM2SC simplex 50/125 OM3SC duplex 50/125 OM3SC simplex 9/125 OS1ST 62.5/125 OM1ST 50/125 OM2LC simplex 62.5/125 OM1LC duplex 62.5/125 OM1LC simplex 50/125 OM2LC duplex 50/125 OM2LC simplex 50/125 OM3LC duplex 50/125 OM3LC simplex 9/125 OS1LC duplex 9/125 OS1FSCMC6BLYFSCDMC6BLYFSCMC5BLYFSCDMC5BLYFSCMCXAQYFSCDMCXAQYFSCSCBUYFSTMC5BLFSTMC6EIFLCSMC6BLYFLCDMC6BLYFLCSMC5BLYFLCDMC5BLYFLCSMCXAQYFLCDMCXAQYFLCSSCBUYFLCDSCBUYHead Office: T: 01279 757775 • F: 01279 653535 51 Scotland: T: 01383 435985 • F: 01383 435993

panduit opticom fibre systemField Polish Fibre ConnectorsField installable with anaerobic adhesive & polishing• ST & SC connectors for 900um tight buffered or3mm jacketed cable.• LC simplex connectors for 900um tight buffered &1.6 - 2mm jacketed cable• LC duplex connectors for 1.6 - 2mm jacketed cableST multimodeFSTMABLLC simplex multimodeFLCSMEIYST singlemodeFSTSABULC simplex singlemodeFLCSSBUYSC simplex multimodeSC simplex singlemodeClip for connecting two SCsimplex connectorsFSCMBLFSC5BUFSCCLIP-LClip for connecting two LCsimplex connectorsLC duplex multimodeLC duplex singlemodeFLCCLIP-LFLCDMEIYFLCDSBUYFibre Consumables page 140-145Opti-Core Fibre CableOpti-Core Fibre Patch Leads• Panduit fibre cable available in OS1, OM1, OM2,OM3 & OM4 versions.• High performance with laser optimised fibre tosupport 10G applications. Most versions availablein 4 - 72 core.• Part of the Panduit 25 year system warrantyprogramme.Contact our sales office for details.• Available as patch lead & pig tails in OS1, OM1,OM2, OM3, OM4 & OS1• Many connector types available• Factory tested supplied with test results• Part of the Panduit 25 year system warrantyprogramme.Contact our sales office for details.QuickNet Pre Terminated Fibre SystemQuickNet pre terminated fibre solution for fastinstallation.Contact our sales office for details.The Panduit Customer Briefing Centre (CBC) in London by Liverpool Ststation, has a product display area and meeting rooms. It is an ideal settingto demonstrate the Panduit system. Contact us for details.sales@minitran.co.uk52www.minitran.co.uk

panduit open racks2 & 4 Post Open Racks• Adjustable front & rear mounting rails on 4 postversion• Printed U height numbersAdditional accessories available. Contact Minitranfor details.2 post rack & accessories45U 2 post open rack with 76mm deep posts R2P45U 2 post open rack with 152mm deepposts with slotsR2P6S3U 2 part centre mount shelf, mountseach side of rack 316mm depth SRM19CM33U 2 part vented ctr mount shelf,mounts each side of rack635mm depthSRM19CMV34 post rack & accessories45U 584mm depth rackR4P23**45U 762mm depth rackR4P**45U 914mm depth rackR4P36**45U 1054mm depth rackR4P42**Castors (set of 4)RCSTSShelf (584mm depth)RSHLF23Shelf (762mm depth)RSHLFShelf (914mm depth)RSHLF36** Threaded equipment rails as standard. Add suffixCN to end of part number for cage nut versions.* 2 & 4 post racks accept NetRunner vertical cable management (below) & PatchRunnersystem on page 54NetRunner Vertical Cable ManagersMounts to 2 post racks with 76mm deep posts and 4post racks shown above.Cable management fingers manage cable on thefront/rear of the rack.• Moulded plastic with pass through holes• Dual hinged cover opens left or rightVertical front & rear management45U 125(w)x306mm(d)45U 170(w)x357mm(d)WMPV45EWMPVHC45EVertical front only management45U 125(w)x165mm(d)45U 170(w)x192mm(d)WMPVF45EWMPVHCF45EHead Office: T: 01279 757775 • F: 01279 653535 53 Scotland: T: 01383 435985 • F: 01383 435993

panduit patch runner systemPatch Runner SystemManages high density network cabling in up tohalf the area required by traditional rack/cablemanagement systems. Eliminates the need forhorizontal cable mngmnt when used with angledpanels (page 45) by taking cables out to the sidechannels.Frees up rack space for additional panels orequipment & reduces the overall number of racksrequired.• Cable mngmnt fingers with integral bend radiuscontrol• Cable pass through holes• Dual hinged doors• High capacity version ideal for Cat6aUsed with 45U 2 & 4 post racks shownon page 53 & angled panels on page 45.PatchRunner 45U front & rear vertical cablemanagement channels6" 152(w)x417mm(d) PRV68" 203(w)x417mm(d) with 4 xPRSP7 slack spoolsPRV810" 253(w)x417mm(d) with 4 xPRSP7 slack spoolsPRV1012" 305(w)x417mm(d) with 4 xPRSP7 slack spoolsPRV1215" 381(w)x417mm(d) with 4 xPRSP7 slack spoolsPRV15For front only versions add "F" after the"V" in the part number e.g. PRVF10Dual hinged doors for above mngmnt6" door PRD68" door PRD810" door PRD1012" door PRD1215" door PRD15Other accessoriesEnd panelPREPPlastic slack spool 5"x1.25" diaPRSP5Plastic slack spool 7"x1.25" diaPRSP7Rack top trough with waterfall. Createspathway above rackCRTWPatchRunner High Capacity 45U front &rear cable management channels6" 152(w)x 714mm(d) high capacity PEV68" 203(w)x 714mm(d) high capacity PEV810" 254(w)x 714mm(d) high capacity PEV1012" 305(w)x 714mm(d) high capacity PEV12For front only versions add "F" after the"V" in the part number e.g. PEVF10Dual hinged doors for above management6" door PED68" door PED810" door PED1012" door PED12Other accessoriesEnd panelPEVEPRack top trough with waterfall. Createspathway above rackR4PWFTech tip: For cable capacity chartssee www.panduit.comPanduit Fibre-Runner overheadcabling system:see page 63.Panduit Grid-Runner underfloorsystem:pages 172-173.sales@minitran.co.uk54www.minitran.co.uk

panduit net-access enclosuresEnergy Efficient Data Centre Net-Access Cabinet SystemNet-Access cabs include many unique features including innovative thermal designs tomaintain hot/cold air separation for improved cooling & reduced energy consumption.Superior cable management, inset frame & in-cabinet ducting options ensure proper airflow.Net-Access cabs have been designed around Cisco switches & have been verified by Cisco asmeeting their Nexus 7000, MD9500 & 6500 series requirements. See page 103 for the thermalmanagement characteristics of these enclosuresCable pathwaysTop air seal fittingsCable managementOverhead/underfloorcable routingThermal managementVertical panel/PDU mountingIntegral grounding/bondingNet-Access Switch Cabs: (2134(h) x 800(w) x 1044mm(d) with 45U cablemanagement on front and rear of front posts45U cabinet with dual hinged perforated front door. Split perforatedrear door, solid removable side panels,45U cabinet as above but without side doors45U open frame without front/rear or side doors45U cabinet with split perforated front & rear doors, solid removable side panels.45U cabinet with split perforated front & rear doors, no side panels.Vertical exhaust ductSTOP PRESSWhite Net-Accesscabs & 42U versionsnow availableCN1**CN2**CN3**CN4**CN5**** Supplied with threaded mounting rails. Substitute ** with CN for cage nut version.Net-Access Server Cabs: (2134(h)x800(w)x1044mm(d) with 45U cable mngmnt on rear of front posts,vertical blanking panels, cage nut rails & PDU brackets45U cabinet with single hinged perforated front door. Split perforated reardoor, solid removable side panelsCS145U cabinet as above but without side doorsCS245U open frame without front/rear or side doorsCS3There are so many accessories to choose from that we have only listed part numbers for cabs & shownsome accessories. Please ask for the Net-Access brochure.Head Office: T: 01279 757775 • F: 01279 653535 55 Scotland: T: 01383 435985 • F: 01383 435993

panduit net-serv enclosuresNet-Serv EnclosuresNet-Serv cabinets are designed to provide the best combination of spaceutilisation & thermal management for server applications. They compliment the Net-Accesscabs (page 55) & provide a complete infrastructure solution.• 42U or 45U heights either 600mm or 700mm wideby 1200mm deep• Cable mngmnt, outset cab frame, perforationpatterns & vertical blanking panels work togetherto ensure proper airflow• Cage nut rails with U height• Verical mount PDU brackets• Optional thermal management systems• Anti tip brackets included• Finger cable mngmnt on std density versions• Four seperate vertical cable pathways on highdensity versions• Lockable doors & side panels• Baying brackets included• Available in basic, standard density, high density& vertical patching versions• Levelling legs fitted• Welded construction, 1134kg load rating• Many accessories availableFinger managementCable managementchannelsNet-Serv cabinet part number configurator:1: S S = Net-Serve Cab2: 76 = 600mm wide7 = 700mm wide3: 2 2 = 42U5 = 45U4: 2 2 = 1200mm depth5: C C = cage nut rails6: 1 1 = Perforated front door7: 22 = Perforated split rear door3 = solid rear doorAccessoriesSet of 4 castorsBracket to vertically mount 19"patch panelsBracket to tool-less mount PanduitPDU'sSCSTRSVPPBSVPDUBVertical panelmounting8: 1 = One side panel2 = Two side panels9 = No side panels9: F = Std density cabs (left/right cable fingers)H = High density cabs (4 x cable mngmntchannels)P = Vertical patchB = Basic (no cable mngmnt)10: V = Vertical exhaust ductLeave blank for no exhaustExample: S722C129FVShelf (584mm depth)Shelf (762mm depth)Shelf (914mm depth)ThermalmanagementSTOP PRESSWhite Net-Servcabs now availableRSHLF23RSHLFRSHLF36There are many accessories to choose from & onlya few are shown here. Please ask for the Net-Servbrochure.sales@minitran.co.uk56www.minitran.co.uk

panduit Pre-Configured InfrastructureFor Cisco Nexus, UCS & Catalyst PlatformsPanduit & Cisco have created a data centre solution that integrates the Cisco compatiblephysical infrastructure systems needed in an optimised data centre deployment.Pre-configured enclosures arrive at partner or end user sites ready to be deployed, reducingthe time required for planning, designing, procurement, installation as well as the cost ofoperators.Panduit pre-configured physical infrastructures for Nexus 7010, Cisco UCS & Catalyst 6509 platformsincrease business agility through high performance, flexible, scaleable & reliable data centre design.Optimised for Power, Cooling & Performance : As a leading infrastructure partner for Cisco, Panduitworks with Cisco engineering & product teams to develop optimal physical layer solutions for networkingproducts. These pre-configured infrastructures were specifically designed for the Cisco UCS, Nexus & Catalystplatforms to balance scaleability, power & thermal characteristics. See page 103 for information on thethermal management characteristics of these enclosures.Pre-Configured For Rapid Deployment: Includes all necessary systems, pre-configured within PanduitCabinets to rapidly deploy Cisco platforms. Includes thermal management, high speed data transport (HSDT)copper & fibre cabling, cable management, grounding & bonding.Scaleability: Designed to support various line card & equipment densities enabling growth and agilityacross the entire offering. Also accomodates migration from 10G to 40G/100G Ethernet with minimuminvestment & downtime. Making changes to Cisco UCS, Nexus or Catalyst platform is easy with modularQuickNet panels & connectivity (page 47) enabling quick migration to higher speeds.FibreRunneroverheadcable routing:contact us fordetailsGridRunnerunderfloorcable routing:pages 172-173For part numbers & configuration options please contact our sales office.Head Office: T: 01279 757775 • F: 01279 653535 57 Scotland: T: 01383 435985 • F: 01383 435993

panduit cable management & cool bootsIn Cabinet 40U Vertical Cable ManagementWorks with the majority of cabs as long as the cab is686mm wide or more. 40U managers with bracketsthat fit to the front or side of the cabinets verticalrails. Both types occupy the spacebetween the rails &side wall of the cab.Can be used in front & rear of the cabinet. PVC cablemngmnt fingers with snap on covers.Sold individually, 2 required per cabinet.With front mount brackets:1778.8(h) x 82.5(w) x 76.2mm(d)With front mount brackets:1778.8(h) x 57.1(w) x 76.2mm(d)With side mount brackets:1800(h) x 74.6(w) x 95.5mm(d)With side mount brackets:1800(h) x 49.6(w) x 95.5mm(d)CWMPV3340CWMPV2340CWMPV3440CWMPV2440Cool Boot Raised Floor Air Sealing GrommetRetrofit installationNew installationFor hot isle/cold isle environments in data centres where cables pass through a cutout in a raised floor.• Airtight design reduces bypass airflow cooling network equipment.• Prevents debris falling below floor• Utilised with cable bundles• Flame retardant materials• "New installation" version has integral gasket to protect cable from abrasion• "Retrofit" version secured to top of raised floor.Hole cut out cable capacity Retrofit installation New installation**4.5"x 6.5" 4.2"x 6.2" RFG6X8SMY RFG6X8Y6.5"x 6.5" 6.2"x 6.2" RFG8X8SMY RFG8X8Y8.5"x 6.5" 8.2"x 6.2" RFG10X8SMY RFG10X8Y10.5"x 6.5" 10.2"x 6.2" RFG12X8SMY RFG12X8Y10.5"x 2.5" 10.2"x 2.2" RFG12X4SMY RFG12X4Y3" dia 2.7" dia RFG3DSMY RFG3DY5" dia 4.7" dia RFG5DSMY RFG5DY**Floor cut out on retrofit versions can be less than cut out dimensions shown.sales@minitran.co.uk58www.minitran.co.uk

Panduit mini-com patch leadsMini-Com Patch LeadsCat5e UTP Ca6 & Cat6a UTP Cat5e shielded Cat6a shieldedCat5e U/UTP 24AWG patch leads non booted:Length PVC LSOH1Mtr UTPCH1M**Y UTPCHL1M**Y2Mtr UTPCH2M**Y UTPCHL2M**Y3Mtr UTPCH3M**Y UTPCHL3M**Y5Mtr UTPCH5M**Y UTPCHL5M**YCat6 U/UTP 24AWG patch leads with integral boot:Length PVC LSOH1Mtr UTPSP1M**Y UTPSPL1M**Y2Mtr UTPSP2M**Y UTPSPL2M**Y3Mtr UTPSP3M**Y UTPSPL3M**Y5Mtr UTPSP5M**Y UTPSPL5M**YCat6a U/UTP 23AWG patch leads with matrix tape tosupress alien crosstalk with integral boot.1Mtr LSOHUTP6A1M**2Mtr LSOHUTP6A2M**3Mtr LSOHUTP6A3M**5Mtr LSOHUTP6A5M**UTP patch leads as standard have white cable.For other coloursWhite: No suffix Yellow: YLreplace the ** withBlack: BL Orange: ORthe following partBlue: BU Red: RDnumber suffix:Green: GR Violet: VLCat5e shielded F/UTP 26AWG leads with boot:1Mtr LSOHSTPC1M**Y2Mtr LSOHSTPC2M**Y3Mtr LSOHSTPC3M**Y5Mtr LSOHSTPC5M**YShielded Cat5e patch leads have grey cable withblack boots as standard. For other boot colours(with grey cable)Black: BL Yellow: YLreplace the ** withBlue: BU Red: RDthe following partnumber suffix:Green: GR Grey: No suffixCat6a shielded S/FTP 26AWG leads with black boot:1Mtr LSOHSTP6X1M**2Mtr LSOHSTP6X2M**3Mtr LSOHSTP6X3M**5Mtr LSOHSTP6X5M**Shielded Cat6a patch leads have grey cable andblack boots as standard. For different colourcable (with blackboots) replace Grey: No suffix Yellow: YLthe ** with thefollowing partnumber suffix:Black: BLBlue: BUGreen: GROrange: ORRed: RDViolet: VLAll Panduit patch leads feature RJ45 plugs withanti tangle locking arms.PanZone Solid LSOH Patch LeadsSolid core Cat6 & Cat6a LSOH leads with an RJ45plug on each end. For zone cabling applications.Cat6 U/UTP 10Mtr LSOH blueCat6 U/UTP 30Mtr LSOH blueCat6 U/UTP 40Mtr LSOH blueCat6 U/UTP 50Mtr LSOH blueCat6a S/FTP 10Mtr LSOH whiteCat6a S/FTP 20Mtr LSOH whiteCat6a S/FTP 30Mtr LSOH whiteCat6a S/FTP 40Mtr LSOH whiteCat6a S/FTP 50Mtr LSOH whiteUPLBU10MYUPLBU30MYUPLBU40MYUPLBU50MYSAPLWH10MSAPLWH20MSAPLWH30MSAPLWH40MSAPLWH50MHead Office: T: 01279 757775 • F: 01279 653535 59 Scotland: T: 01383 435985 • F: 01383 435993

Panduit mini-com patch leads & plugs10Gig SFP+ Direct Attach Passive Copper CablesSubstitute * with required length:0.5 = 0.5Mtr, 1 = 1Mtr, 2 = 2Mtr, 3 = 3Mtr, 4 = 4Mtr,5 = 5Mtr, 7 = 7MtrLow power, low latency 10Gb/s server interconnectsolution for top of rack switching applications.With multiple virtual machines server I/Oconsolidation technology requires 10Gb/sinterconnects between top of rack switches &servers. CX4 twin axial leads can achieve 10Gigperformance port to port without additional signalprocessing or conversion.PSF1PXA*MBUQuickNet Plug Pack Housings(Shown with RJ45 plug leads inserted)Allows multiple patch cords to be simultaneouslyconnected / disconnected with one hand for speedof deployment.Patch leads snap into plug pack housing. Standardversions compatible with Cisco Catalyst 6500 & 4500series switches.Recessed versions compatible with Cisco Nexus 7000series switches giving additional clearance at ports.QuickNet Plug Pack HousingsStandard 6 portQPP6**Standard 8 portQPP8**Standard 12 portQPP12**Recessed 6 PortQPPR6S** For housing colour substitute the ** with thefollowing prefix: Black: BL White: WHBlue: BU Red: RDRemoval tool - allows individual patchcords to be removed without disruptionto other connectionsQPPRTLock in device - prevents unauthorised removal ofpatch cordsLock in for 6/12 port - Recomended qty2 per 6 port & 4 per 12 port QPPLD6-XLock in for 8 port - Recommended qty2 per 8 port QPPLD8-XRJ45 Plugs & ToolingCat5e UTP Cat6 UTP Cat5e/6 shieldedTooling• RJ45 plugs with anti tangle latches• Cat6 UTP and shielded plugs have slim line strainrelief boots• Cat5e plugs for stranded or solid cable.• Cat6 plugs for stranded cable• Wire prep tool separates & holds conductors inplace prior to insertion into RJ45 plug.Cat5e UTP plugCat5e shielded plugCat6 UTP plugCat6 shielded plugCrimp tool For Cat5e/6 plugsWire preparation toolMP588-CMPS588-CSP688-CSPS688-CMPT5-8WPT-8sales@minitran.co.uk60www.minitran.co.uk

Panduit Blockout & Lock-in DevicesRJ45 Blockout DeviceSimple & secure method of controlling access todata & deters vandalism to RJ45 sockets.Blockout snaps into RJ45 socket & is released withremoval tool.Pack of 10 with 1 x removal toolPack of 100 with 5 x removal toolsPSL-DCJB**PSL-DCJB**-C** Substitute the ** with the following partnumber suffix for the required colour:Red: No suffixOff White: IWGrey: IGBlack: BLBlue: BUGreen: GRYellow: YLOrange: ORRJ45 Plug Lock-In DeviceTo install device onto plug: Insertthe tool & rotate clockwise 90degrees. Snap the plug into thedevice & rotate the tool back tothe original position and remove.To install into jack: Insertplug into the jack in theusual way.To remove plug from jack: Insertthe tool into the device & rotateclockwise 180 degrees. Removethe plug from the jack. Rotatethe tool back to original position& remove it from the device.The RJ45 plug lock-in device is an innovativesolution that secures network connections to reducenetwork downtime, data security breaches &hardware replacement due to theft.• Flush mount versions: Used with modularpatch panels, flush mount jacks• Recessed versions: Used with modems,IP Cameras, Access Points. The RJ45 plugprotrudes from the end of the Lock-in device toallow connection in recesses.• Super recessed versions: The RJ45 plug protrudesmore than the recessed version to allowconnection to more RJ45 socket types.These devices fit aroundpatch lead plugs that are notbooted and to Panduit RJ45plugs with integral slimline boots. Theydo not fit all booted patch leads & maynot fit all applications.We strongly recommend that customerstry a sample before ordering.Flush Lock-in deviceFlush Lock-in: Pack of 10 with 1 xinstallation/removal toolPSL-DCPL**Flush Lock-in: Pack of 100 with 5 xinstallation/removal toolPSL-DCPL**-CRecessed Lock-in deviceRecessed Lock-in: Pack of 10 with 1 xinstallation/removal toolPSL-DCPLR**Recessed Lock-in: Pack of 100 with 5 xinstallation/removal toolPSL-DCPLR**-CSuper Recessed Lock-in deviceSuper Recessed Lock-in: Pack of 10with 1 x installation/removal tool PSL-DCPLS**Super Recessed Lock-in: Pack of 100with 5 x installation/removal tool PSL-DCPLS**-C** Substitute with required colour. Please note that superrecessed versions are only available in red, black & green.Red: No suffix Black: BL Blue: BU Yellow: YLWhite: IWGreen: GROrange: ORGrey: IGHead Office: T: 01279 757775 • F: 01279 653535 61 Scotland: T: 01383 435985 • F: 01383 435993

Panduit label printers & cable tiesLS8 Handheld Thermal PrinterThermal transfer label printer for electrical & datacables & component applications• Labels cut to length feature• Partial cut feature to easily tear apart labels• Integrated memory for automatic formating,recall of last label legend & number of labelsremaining in cassette• Fast loading cassette contains label material &ribbon• USB interface allows import of data, systemupgrades & label printing from a wireless laptopor desk top computer.Printer with 1 x cassette of S100X150VAC labels, batteries, rigid carrying case,USB cable & PC interface software, protective impact bumper & wrist strapLS8E-KITAs above but with QWERTY keyboardLS8EQ-KIT-ACEUK 100 - 240V AC power adapterLS8-ACUCable labels For Cat5e/6 25.5(w)x28.1(L) (200/cassette) S100X150VACFor Cat5e/6 12.7(w)x28.1(L) (200/cassette)S050X150VACFor Fibre patch leads (40.8 (L) x 25.4mm (w) (175/cassette)S100X160VACFor Fibre patch leads (55.9 (L) x 25.4mm (w) (125/cassette)S100X220VACPanel labels For Mini-Com & Netkey punchdown panels without labels (75/cassette) C379X030FJCFor Netkey punchdown panels with labels (50/cassette)C390X030Y1CFor Minicom modular panels CP24/48BL,CP24/48WSBL & CPA24/48BL series (125/cassette)C252X030FJCFor Minicom modular panels CPPL24/48WBL& CPPLA24/48WBLY series (75/cassette)C261X035Y1CFor Minicom modular panels CPPL24/48M6BL (50/cassette)C390X030Y1CSurface box labels For CBX1 series (500/cassette)C061X030FJCFor CBXJ2 series & CBX2 series (200/cassette)C125X030FJCFor CBXC4 series & CBX4 series (125/cassette)C252X030FJCFor CBXD6 series & CBX12 series (75/cassette)C379X030FJCWallplate label For CFPUKS & NKUKS series (200/cassette) C125X030FJCHook & Loop Cable TiesHLT SeriesHLC SeriesHLT Series (Hook & Loop) Black pack of 10203 mm L x 12.7 mm W HLT21-XO305 mm L x 12.7mm W HLT31-XOHLC Series (With Clinch ring) Black pack of 10305 mm L x 19.1 mm W HLC3S-XO457 mm L x 19.1 mm W HLC5S-XOHLS Series (in Roll Form)Black cut to lemgth4572 mm L x 19 mm W HLS-15ROHLS Series (Perforated 10 ties to a roll)Black305 mm L x 19 mm W HLS3S-XO457 mm L x 19 mm W HLS5S-XOHLS SeriesEasy to release and re-use. Ideal for copper and fibreoptic cables. Also available in a range of colours.sales@minitran.co.uk62www.minitran.co.uk

Panduit cable routingCable Bundle OrganiserStep 1: Align inserts& hold togetherStep 2: Insert cablesone at a timeStep 3: Pull insertsapart.Step 4:Place jacketaround insertStep 5: Guide the toolalong the bundle. Stopat desired intervals toapply cable tie.Step 6: Slide tooloff cable bundleEfficiently organises up to 24 data cables to optimisebundle size & improve the installed appearance.Organised bundles can then be easily secured usinghook & loop cable ties (page 56).• Comfortable to handle, reduces cable bundlingtime by up to 50%• Tool contains a green insert for cables with a dia of4.57-6.3mm (Cat5e/6 UTP). Yellow insert for cableswith a dia of 5.84-7.87mm (Cat6a & shielded)Kit with jacket cover, hook & loopfastener & two insertsCBOT24KGridRunner Underfloor Cable Routing SystemPathway system routes & manages network& power cable under a raised floor. Robustconstruction with multiple widths & depths. Quick& easy installation as sections drop in between thefloor stringers & attach to GridRunner brackets.Integral bonding & grounding. With bend radiuscontrol corners, intersections, adjustable levelsections & offset basket sections.See pages 172-173FibreRunner Overhead Cable RoutingWyr-Grid Overhead cable TraySee pages 169-170For routing fibre & copper cable betweenequipment racks. Large capacity channels withhinged covers.Quick assembly, multiple spillouts, T fittingsand angles. Available in black, orange & yellow.Contact us for details.Head Office: T: 01279 757775 • F: 01279 653535 63 Scotland: T: 01383 435985 • F: 01383 435993

Single or twin compartmenttrunking ideal for power,data, low voltage & fibreapplications.T70 Trunking & DividerPanduit T70 trunkingT70 T FittingsT70 Faceplates & Modulesfor Data (copper) & FibreSingle compartment T T70TAWTwin compartment T T702TAWSingle compartment base(3Mtr length) T70BAW-3Twin compartment base(3Mtr length) T702BAW-3Cover (2 required for twincompartment trunking)3Mtr length T70CAW-3Divider (2Mtr length) T70DW-2Single compartment: 103mmwide. Twin compartment:184mm wide. Both: 45mm deep.T70 CouplersSingle compartment basecoupler fitting T70BCAW-XTwin compartment basecoupler fitting T702BCAW-XCover coupler fitting T70CCAW-X(2 required for twincompartment trunking) T70 End Cap FittingsT70 Corner & Right AngleFittingsCornerRight angleCorner fitting (for room corner)Single compartment insidecorner fitting T70ICAWTwin compartment inside cornerfittingT702ICAWSingle compartment outsidecorner fitting T70OCAWTwin compartment outsidecorner fitting T702OCAWRight angle fittingsRight angle singlecompartment fitting T70RAAWRight angle twincompartment fitting T702RAAWT70 Faceplates & Modulesfor PowerHorizontal faceplateto accept 1xtwin module T70BH1AWHorizontal faceplateto accept 2xtwin modules T70BH2AWVertical faceplate toaccept 1xtwin module T70B1AWVertical faceplate toaccept 2xtwin modules T70B2AWTwin shutteredangled module CHS2SAW-XTwin non-shutteredangled module CHS2AW-XT70 faceplates snap directlyinto T70 trunking or workstation outlet shown below.Horizontal faceplates acceptangled modules that pointdownwards. Vertical faceplatesaccept angled modules facingleft or right. For Cat5e/6/6a jacksor fibre couplers that snap intomodules see Mini-Com jacks onpages 40 & 50.T70 Work Station OutletSingle compartmentend capT70ECAWTwin compartmentend capT702ECAWFaceplate to accept2x modules T70UMBAW-XUK 13 amp powermodule EMG13AW-XBlank module EBGAW-XT70 faceplates snap directly intoT70 trunking or work stationoutlet shown right.T70WC2AWAllows outlets to be placed on/above T70 trunking. Accepts thefaceplates & modules shownleft and above for data, fibre& power.sales@minitran.co.uk64www.minitran.co.uk

HUBBELL introduction & contentswww.hubbell-premise.comHubbell is a worldwide company with annualsales of 3 billion US dollars. Main areas ofactivity are structured cabling, power, lighting,electrical & telecommunications. Hubbell'shistory & commitment to quality goes backover a century.Structured CablingHubbell gives you a true choice withoutcompromising performance. You can selecta single brand end to end solution featuringHubbell cable & connectivity or mix & matchHubbell connectivity with industry leadingcable manufacturers from Hubbell's partnerlist.Products include:UTP Cat5e, Cat6 & Cat6aShielded Cat5e & Cat6aAudio Visual productsHarsh environment systemsCable routing and cable managementToolingRack systemsFibre productsHUBBELL section contentsCable 66Jacks 66wallplates & modules 67Modular patch panels 67 - 68Punchdown patch panels 67Telco panels 68Surface mount boxes 68Tooling 68Cable management 69Patch leads 69I-Frame 2 post rack system 70Ladder rack & accessories 70Rebox remote equipment cabinet 7025 Year System WarrantyInstallations by approvedpartners are backed by Hubbell's"25 year Mission Critical"system warranty. Hubbellstands behind products &applications including emergingtechnologies.Head Office: T: 01279 757775 • F: 01279 653535 65 Scotland: T: 01383 435985 • F: 01383 435993

hubbell cable & jacksCat5e, Cat6 & Cat6a CableCat5e U/UTP LSOH blueCat6 U/UTP LSOH violetCat6a U/UTP LSOH blueCat6a F/UTP LSOH greyC5ESCBLSZHBC6SCSLSZHVC6ASCSLSZHBC6ASCSFTPLSZHGYHigh performance cable exceeds the NSI/TIA & IECstandards & is UL listed.Cat5e UTP cable:• For 10/100/1000Base-T (Gigabit)• 24 AWG solid copper cableCat6 UTP cable:• For 10/100/1000Base-T & 10GBase-T (10 Gig) overlimited distance -see standards• Pair divider improves performance• 23 AWG solid copper cableCat6a F/UTP cable:• For 10/100/1000/10G Base-T• Pair divider improves performance• 23 AWG solid copper cableCat5e & Cat6 cable in 305Mtrboxes, Cat6a on 305Mtr reels.Hubbell 25 year system warranty alsoavailable with Draka cable.See page 73See our cable selection guide & explanation of the new cable typese.g. U/UTP, F/UTP etc on page 85Cat5e, Cat6 & Cat6a UTP 110 Jacks• 110 Termination UTP Cat5e/6/6a jacks• Colour coded jacks for port/zone identification• Reduces termination time by 75% no need tountwist cable pairs.• Fast punchdown - terminate all four pairs in oneoperation with TX4P one punch tool (page 68)• Snaps into Hubbell modular panels, modules &surface boxesCat5e UTP 110 Xcelerator jackCat6 UTP 110 Xcelerator jackCat6a UTP 110 NextSpeed jackHXJ5E**25HXJ6**25HXJ6A**** Substitute the **in the part numberwith the requiredcolour:White: OWBlack: BKBlue: BGreen: GNYellow: YOrange: ORRed: RCat6a Shielded Tool-Less Jack• Tool-less termination• Shielded jack with die cast construction• Third party tested & verified• 10Gbe channel tested delivering 3Db of headroom• Snaps into Hubbell modular panels, modules &surface boxesCat6a shielded jackSJ6A24BFloor boxes:pages 80-81sales@minitran.co.uk66www.minitran.co.uk

hubbell wallplates & panelsWallplates & Blanks• Flat or bevelled wallplates• Used with 50x25mm modules (below)Single gang flat wallplateSingle gang bevelled wallplateDouble gang flat wallplateDouble gang bevelled wallplate50x25mm half blank50x12.5mm quarter blankEMBP1EBM1EMBP2EBM2EMB25EMB12Modules to accept Jacks• Accepts jacksshown onprevious page• 50x25mmmodules used inabove wallplates• LJ6 modulesused in floor boxapplications50x25mm flat50x25mm angledLJ6 flat50x25mm flat shuttered50x25mm angled shutteredLJ6 37x25mm flat shutteredLJ6 37x25mm angled shutteredLJ6 angledEM1SEM1SAEM6SEM6SAModular Panels (For UTP Jacks)16 port & high density panels notsuitable for UTP Cat6a jack• Accepts UTP jacks on previous page• Std versions with numbered ports• High density versions give rack space saving• Also accepts Hubbell multimedia AV modules16 port 1U UDX16E24 port 1U UDX24E48 port 2U UDX48E36 port 1U high density UDX36E48 port 1U high density UDX48E1URear cable management barRCMBPunchdown UTP 110 Patch Panels• Cat5e, Cat6 & Cat6a UTP 110 punchdown• IDC pair splitting tower allows for minimumdisruption to cable pair twists• Numbered portsOne punch tool: page 68Cat5e 24 port 1UCat5e 48 port 2UCat6 24 port 1UCat6 48 port 2UCat6a 24 port 1UCat6a 48 port 2URear cable management barP5E24UEP5E48UEP6E24UP6E48UP6A24UP6A48URCMBHead Office: T: 01279 757775 • F: 01279 653535 67 Scotland: T: 01383 435985 • F: 01383 435993

hubbell panels & surface boxesModular Panel (for Cat6a Shielded Jacks)• Accepts Cat6a shielded jack on page 66• With rear cable management• With numbered ports24 port 1U PSJ24BKShown loaded with jacks100 Base-T & 1000 Base-T Telco Panels100Base-T Panels:• With orange RJ45 sockets• 24 port panel has 2 x female Telco connectors & 48port has 4 x female Telco• Tested to 100Mhz & exceeds Cat5 transmissionrequirements100Base-T shown100Base-T 24 port 1U100Base-T 48 port 2U1000Base-T 24 port 1U1000Base-T 48 port 2UMCC24100BT19MCC48100BT19PG24PG481000Base-T Gigabit Panels:• 3rd party verified to IEEE802.3ab for Gigabittransmission• 24 port panel has 4 x female Telco RJ21Xconnectors & 48 port has 8 x female TelcoRJ21X connectors on the rearWhen using 1000Base-T panels the correct Hubbell leads must be used.Please contact our office for details.Surface Mount Boxes• Individual port labelling fields & knockouts• With double sided tape & mountimg screws• With tie wrap anchor on base & cable ties• 4, 6 & 12 port versions have posts for spoolingexcess fibre cable• 1 - 6 port has ports down one side, 12 portversion has 6 ports on each sideAccepts Xcelerator & Hubbell AV jacks1 port ISB1OW2 port ISB2OW4 port ISB4OW6 port ISB6OW12 port ISB12OW1 Punch ToolTerminates all 4 pairs in one punch & cuts off excesswire. Jack Knuckles termination aid assists withlacing / terminating jacks.1-Punch tool for Xcelerator UTP110 punchdown jacks TX4PJack Knuckles termination aid - locatesjack prior to punchdownHXTA1-Punch tool for Cat6/6a UTP 110punchdown panelsTX4PPsales@minitran.co.uk68www.minitran.co.uk

Hubbell cable management & patch leadsHorizontal 1U cable managementwith D ringsPatch LeadsUTP leadsWith 4 D ringsMCCMP1UHorizontal enhanced cable managementCat6a Shielded leadsFront managementU/UTP leads• UTP leads with clear polycarbonate integratedboot• Snagless design• 24 AWG for Cat6• 26 AWG for Cat6aShielded Cat6a• Overmoulded slimline strain relief boot• High performance true 10GBase-T assuranceFront managementwith hinged coverFront/rear management+ hinged coversAll the above cable management panels have7 rings and 6 pass through holes. All steelconstruction, no plastic parts to wear or break.Front management with 7 rings1U (3.5" depth rings)HC119ME3N2U (3.5" depth rings)HC219ME3N2U (6.0" depth rings)HC219ME6NFront management with 7 ringsand hinged cover1U (1.75" depth rings)HC119CE1N2U (3.5" depth rings)HC219CE3NFront & rear management with 7 ringsand hinged covers1U (3.5" front ring depthand 6.0" rear ring depth)HC119GC362U (3.5" front ring depthand 6.0" rear ring depth)HC219GC36Cat5e U/UTP PVC patch leads3ft (0.91Mtrs) Cat5e7ft (2.13Mtrs) Cat5e10ft (3.05Mtrs) Cat5e15ft (4.57Mtrs) Cat5eCat6 U/UTP PVC patch leads3ft (0.91Mtrs) Cat67ft (2.13Mtrs) Cat610ft (3.05Mtrs) Cat615ft (4.57Mtrs) Cat6Cat6a shielded PVC patch leads3ft (0.91Mtrs) Cat6a7ft (2.13Mtrs) Cat6a10ft (3.05Mtrs) Cat6a15ft (4.57Mtrs) Cat6aSubstitutethe * in the partnumber with therequired colour:White: WBlack: BKBlue: BGrey: GYHC5E*03HC5E*07HC5E*10HC5E*15SC6*03SC6*07SC6*10SC6*15PC6A*03PC6A*07PC6A*10PC6A*15Yellow: YOrange: ORRed: RGreen: GNHead Office: T: 01279 757775 • F: 01279 653535 69 Scotland: T: 01383 435985 • F: 01383 435993

hubbell rack & cabinetI-Frame 45U 2 Post rack• Designed to align with two foot data centre floortiles & dropped ceiling floor grid• Eleven I-Frame racks fits into the space of tenconventional racks• Exceptional column strength eliminates the needto tie the top of the rack to the wall• Cables run within each vertical column• Cable routing spools & hinged covers• Fast easy installation - just bolt the column to thefloor & screw horizontal in placeEach IS7 column is supplied with a top horizontalplate, 12 x snap in cable spools, hinged columncover, heavy duty floor anchor, screws/washers,bottom alignment installation aid & floor template.1 x IS7 column/top plate & accessories.(Two columns must be ordered for thefirst rack in a line. Only one IS7 column needsto be ordered for each additional rack if theyare being used in a line).IS7Top ladder rack - provides an overheadcable pathway between IS7 columnsRear cable management kit -simplifies pulling, lacing &terminating horizontal cableICKLICKCAdditional cable spools (pack/50)ICKSSLadder Rack & AccessoriesRebox Remote Equipment CabinetModular system easily configured for new andexisting cable routing. Mounts to floors walls,ceilings, equipment racks & cabinets.Rack screws (pack of 20) 1224RRSCRW20Ladder rack (10ft x 12")HLS1012BLadder rack (6ft x 12")HLS0612BLadder rack 12" 90 degree angled HLF1290BMounting kit - secures ladderrack to top of rackHLMPK19Wall angle support for terminatingadder rack to wallHLX0612Protective end caps. Used on endof cable posts.HLECPK2T junction splice kit - connects ladderrack perpendicular to anotherHLTKVertical wall bracket - secures ladderrack vertically to wallHLVWBKSplice kit (joins ladder racking)HLBSK• Mounting areas for panels & active equipment• Engineered airflow for active equipment• Tamper resistant per Telcordia GR-487-CORE• Load capacity 100lbs• Accepts maximum hub/switch depth of 14"• Cable entry via side, top & bottom• Light grey powder coat finish. Black & other sizesalso availableWith 2U rack space for switches & 2Ufor panels. 818(h)x615(w)x178mm(d)With 5U rack space for switches & 4Ufor panels. 818(h)x615(w)x254mm(d)RE2RE4sales@minitran.co.uk70www.minitran.co.uk

Hubbell Cable protectionTredtrak & TruktrakFloortrak5 channel high impact non metallic cableprotectors designed to safeguard electrical andcommunications cable from pedestrian & vehicletraffic.Tredtrak - For lightweight traffic applications inpublic, institutional & commercial envoronments.Truktrak - For industrial locations with heavy trafficsuch as trucks and fork lifts.• Easy installation, breakdown & storage.• Five channel modular inter locking system.• Cable channel dimensions:Tredtrak: 33(h) x 33mm(w)Truktrak: 31.8(h) x 31.8mm(w)• Height: Tredtrak 50mm, Truktrak 57.2mm• Easy access hinged covers.• Safety surface pattern reduces risk of slipping.• Material: High density cast polyurethane,reinforced fibreglass on hinge.• Truktrak maximum load: 20,150 lbs at 21˚C;9,200 lbs at 48˚C.Flexible black PVC protective cover for cables thatrun across the floor. Organises cables & protectsagainst trip hazards.12.7x7.8mm cable ctr hole, 3.05Mtrlength. 69.8(w)x13.4mm(h) HPWFT2BK1019x12.7mm cable ctr hole, 1.52Mtrlength. 76.2(w)x19.05mm(h) HPWFT3BK519x12.7mm cable ctr hole, 7.63Mtrlength. 76.2(w)x19.05mm(h) HPWFT3BK2530.7x19.05mm cable ctr hole, 1.52Mtrlength. 82.5(w)x27.94mm(h) HPWFT4BK530.7x19.05mm cable ctr hole, 7.63Mtrlength. 82.5(w)x27.94mm(h) HPWFT4BK25TredtrakTredtrak - 3ft lengthTredtrak end caps (pair - male& female)Tredtrak X fittingTredtrak Y fittingTruktrakTruktrak - 3ft lengthTruktrak end caps (pair - male& female)Truktrak 45 degree left turnTruktrak 45 degree right turnHBLTRED5BH1HBLTRED5ECBHIHBLTRED5XBHIHBLTRED5YAHIHBLTT5BHIHBLTT5ECBHIHBLTT545LBHIHBLTT545RBHISee our new'Security' sectionon pages 244-250Head Office: T: 01279 757775 • F: 01279 653535 71 Scotland: T: 01383 435985 • F: 01383 435993

cable & accessories contentsCableMini5/6 Cat5e & Cat6 solid cable 73Acome & Draka Cat5e, Cat6 & Cat6a solid cable 73External Cat5e & Cat6 cable 74Mini5/6 Cat5e & Cat6 patch cable 74Nexans cable 75Panduit cable 7525 pair Cat5e cable 75RG59 coax cable 75Backboxes, Adaptors, Couplers & BalunsPVC & Dry lining backboxes 76Decorative wallplates 76Transition points 76Couplers & Splitters 77Data - Voice adapters 78RJ12 jacks 78RJ45 T adapters 78RJ45 - D Type Modular Adapters 78RJ - BT adapters 79Composite Video & G703 baluns 79Balun panels 79Surge protector 79FloorboxesMini5 floor boxes 80Schneider (formerly Mita) floor boxes 81RJ Plugs, Boots, Blockout & Lock-inDevicesAMP RJ plugs 82Coble RJ plugs 82Panduit RJ plugs 83RJ45 strain relief boots 83Panduit RJ45 Blockout Devices 84Panduit RJ45 Plug Lock-In Devices 84Cable DefinitionsThe new cable types 85Types of shielding 85Cable Fire Ratings 85sales@minitran.co.uk72www.minitran.co.uk

cableCat5e & Cat6 Solid CableAll in305MtrboxesCat5e U/UTP Solid CableCat5e PVC U/UTP greyCat5e PVC U/UTP redCat5e PVC U/UTP blueCat5e PVC U/UTP yellowCat5e PVC U/UTP greenCat5e LSOH U/UTP violetCat5e Shielded F/UTP Solid CableCat5e PVC F/UTP greyCat5e LSOH F/UTP greyCat6 U/UTP Solid CableCat6 LSOH U/UTP violetCat6 LSOH U/UTP greyUTP4M5SBUTP4M5SB-RDUTP4M5SB-BEUTP4M5SB-YWUTP4M5SB-GNUTP4M5SB-LSFTP4W5SBFTP4W5SB-LSUTP4M6SB-LSVTUTP4M6SB-LSProvides significant headroom over the relevantstandards. Unlike some other low cost solutionsMini5/6 uses pure copper in the correct AWG wiresize to ensure reliability & channel performance.• In 305Mtr easy pull slimline boxes• Low memory snag free• Metre marked from 305Mtrs downwards• 25 year system warranty via approved installersCat5e cable:• 24 AWG pure copper cable• Independently tested & verified by Intertek testhouse (See certificate on page 21)• ETL verified to ANSI/TIA-568-B.2Cat6 cable:• 23 AWG pure copper cable• Independently tested & verified by 3P test house(See certificate on page 21)• ETL verified to ANSI/TIA-568-C.2• With cable pair separatorSee our cable selection guide & explanation of the new cable types e.g. U/UTP F/UTP etcon page 85Cat5e, Cat6 & Cat6a Solid CableAcome are a French cable manufacturer who havebeen established for over 50 years. They have anexcellent reputation for quality & innovation.Draka are a UK manufacturer and part of thePrysmian Group and are a leading manufacturer ofdata, power and other electrical cable.Acome Cat5e UTP LSOH IvoryM4965ACat5e F/UTP PVC GreyM4967ACat5e F/UTP LSOH Ivory M4969ACat6 U/UTP LSOH Ivory M5001ACat6a F/UTP LSOH Ivory R7291ADraka Cat5e F/UTP LSOH Grey 1000056Cat6a U/FTP LSOH Grey 1016621Cat6a U/FTP LSOH Aqua 1003514All in 305Mtr boxes apart from Cat6a which ison a 500Mtr reel• Cat5e cable is 24AWG, Cat6 is 23AWG.• Acome Cat6a is 24 AWG• Draka Cat6a is 23 AWG• Pure copper solid cable• Cat6 & Cat6a have cable pair separatorsAcome & Draka cable is approved byHubbell for use in their 25 year systemwarranty programme.Cat6a cable approved by Mini6 for the 25year warranty.Head Office: T: 01279 757775 • F: 01279 653535 73 Scotland: T: 01383 435985 • F: 01383 435993

CAbleExternal Cat5e/6 CableSteel Wire Armoured Cat5e/6 CableExternal cable has a black water resistantPolyethylene outer sheath.Mini5 Cat5e U/UTP(305Mtr box)UTP4M5SB-EXTAcome Cat5e U/UTP(500Mtr reel)R7209ADraka Cat5e F/UTP(500Mtr reel) 1000100Draka Cat6 U/UTP(500Mtr reel) 1017465Mini6 Cat6 U/UTP(305Mtr box)UTP4M6SB-EXT• Steel wire armour for rodent protection• Black LSOH outer jacket & grey LSOH innerjacket• 24AWG copper cable• To EN50288• Outer jacket OD 10.58mm for Cat5e UTP &10.8mm for Cat6 F/UTP• Pair cross separator in Cat6 cable• Foil shield & drain wire on F/UTP cableCut to lengthCat5e U/UTP 144965Cat6 U/UTP 145001Cat6 F/UTP 145007Cut to length in increments of 10Mtrs. e.g. 10Mtr, 20Mtr, 30Mtr lengths etcCat5e & Cat6 Patch Cable• Low cost stranded patch cable in 305Mtr boxes or500Mtr reels• 24AWG for Cat5e & Cat6 UTP• 26AWG for Cat5e F/UTP• Metre marked cable• ETL verified to ANSI/TIA-568-C.2Cat5e U/UTP patch cable (305Mtr box)U/UTP Grey PVCU/UTP Grey LSOHU/UTP Blue PVCU/UTP Black PVCU/UTP Green PVCU/UTP Red PVCU/UTP Yellow PVCUTP4W5PBUTP4W5PB-LSUTP4W5PB-BEUTP4W5PB-BKUTP4W5PB-GNUTP4W5PB-RDUTP4W5PB-YWCat5e F/UTP patch cable (305Mtr boxes)F/UTP Grey PVCFTP4W5PBF/UTP Grey LSOHFTP4W5PB-LSCat5e U/UTP patch cable (500Mtr reel)U/UTP Grey PVCUTP4W5PREU/UTP Blue PVCUTP4W5PRE-BEU/UTP Red PVCUTP4W5PRE-RDU/UTP Yellow PVCUTP4W5PRE-YWCat6 U/UTP patch cable (305Mtr boxes)U/UTP Grey LSOHUTP4M6PB-LSU/UTP Blue LSOHUTP4M6PB-LSBEU/UTP Red LSOHUTP4M6PB-LSRDSee our cable selection guide & explanation of thenew cable types e.g. U/UTP F/UTP etc on page 85RJ45 plugs page 82-83sales@minitran.co.uk74www.minitran.co.uk

CableNexans CablePanduit CableNexans Cat5e, Cat6, Cat6a, Cat7, Cat7a & cablefor harsh industrial, oill & gas environments. Lowcost Essential & LANmark ranges available inU/UTP & shielded. See pages 23, 26 & 33.Panduit Cat5e, Cat6 & Cat6a cable. Mid marketU/UTP Netkey & high performance U/UTP &shielded Pan-Net ranges. See pages 36 & 40.Cat5e U/UTP 25 Pair Cable• 24AWG solid 25 pair U/UTP cable• Aqua LSOH sheath with rip cord• Cat5e Gigabit performance• Manufactured by General CableCut to lengthCat5e UTP 25 pair668725CAZDCoax CableCW1308 & CW1308B Voice CableCut to lengthRG59BU solid black coaxRG59BUCut to lengthSee page 152Fibre CablePatch LeadsCut to lengthSee pages 122-124Mini5/6 Cat5e, Cat6 & Cat6a U/UTP & shieldedpatch leads pages 17 & 18Head Office: T: 01279 757775 • F: 01279 653535 75 Scotland: T: 01383 435985 • F: 01383 435993

Backboxes, decorative wallplates & transition pointsBackboxes• Knock outs at rear, top & bottom of PVC boxes• Knock outs at angle of top/rear & bottom/rear ofdry lining versionsStandard back Boxes (PVC)Single gang 21mm deepDP1-21PWBSingle gang 32mm deepDP1-32PWBSingle gang 45mm deepDP1-45PWBDouble gang 32mm deepDP2-32PWBDouble gang 45mm deepDP2-45PWBDry lining back boxes (for cavity walls)Single gang 35mm deepDP1-35PWB-DLSingle gang 46mm deepDP1-46PWB-DLDouble gang 35mm deepDP2-35PWB-DLDouble gang 46mm deepDP2-46PWB-DLDecorative WallplatesDecorative wallplates available in many finishes foruse with black or white 50x25mm snap in modules.Versions with a black plastic inner rim match blackmodules & decorative wallplates with a white rimare for white snap in modules.For Mini5/6 black or white modules seepage 8. AV modules pages 113-114Finish White inner rim black inner rimBrushed stainless steel MT50-*000BS MT50-*000BSBKPolished steel MT50-*000PS MT50-*000PSBKSatin brass MT50-*000SB MT50-*000SBBKSpepped edge brass MT50-*000SE MT50-*000SEBKRoped edge brass MT50-*000RE MT50-*000REBKAntique bronze MT50-*000AB MT50-*000ABBK* Substitute * with 1 for single gang & with 2 for double gang.e.g. MT50-1000BSBKCat5e & Cat6 Transition PointsFor punching down & joining two ends of Cat5e/6cable. LSA/110 dual punchdown.Cat5e UTPCat5e shieldedCat6 UTPCat6 shieldedMT50-C5EBMT50-C5ESMT66-C6EBMT66-C6ESsales@minitran.co.uk76www.minitran.co.uk

Couplers & splittersCouplers & Reducers• Cat5e, Cat6 & Cat6a versions• UTP & shielded couplersPanel Mount CouplersCat5e UTP (black)Cat5e shieldedCat6 UTP (black)Cat6a shieldedPanel mountRJ45PCBK5JRJ45PCSH5JRJ45PCBK6JRJ45PCSH6J• Reducer snaps into coupler mating face & reducesRJ45 8 position to 6 positions & 6 position (RJ12) to4 position by blocking the outer edge contacts.• Panel mount versions snap into "keystone"wallplates & patch panelsFree Hanging CouplersRJ12 (6 contact)Cat5e UTP (white)Cat5e shieldedCat6 UTP (black)Cat6a shieldedReducerRJ45 to 6 positionsRJ12 (6 pos) to 4 posFree hangingRJ12FCBERJ45FCBE5RJ45FCBS5RJ45FCBE6RJ45FCBS6RJC86BKRJC64RJ45 SplittersTMODU4/TMODU4STMODU5/TMODU5SRJ45 plug - 2 x RJ45 sockets converts jack stylefunction as a T adapter or alters the wiring sequenceof a modular jack. With 110mm lead length & snapon icons for voice (red) & data (blue).TMODU6/TMODU6STMODU7/TMODU7SutpstpSplits 4 pair T568A/B jack for 10Base-T(jack 1) & Token Ring or voice (jack 2) TMODU4 TMODU4SESplits 4 pair T568A/B jack for 10Base-Tapplications at either end TMODU5 TMODU5SESplits 4 pair T568A/B jack for 1, 2 or 3pair voice (jack 1) & 1 pair voice/modem (jack 2) TMODU6 TMODU6SEBridges all jack pairs. Compatible withany jack wiring. Provides an additionaljack with the same wiring. TMODU7 TMODU7SEDeskpods:page 232Head Office: T: 01279 757775 • F: 01279 653535 77 Scotland: T: 01383 435985 • F: 01383 435993

data/voice, adaptors & rj12 jacksData/Voice AdaptorsLeaded Switchable Leaded CouplerAllows telephone equipment with BT plugs to beconnected to an RJ45 cabling network.The switchable adapter is ideal when it is not knownbeforehand which adapter type is needed & may bechanged between secondary or PABX at the flick ofa switch.Voice products see pages 151-158Leaded adapters (RJ45 plug - BT Skt)Secondary leadedDVA-WSECFull Master (PSTN) leadedDVA-PSTNPABX leadedDVA-WPBXSwitchable leaded (switchable betweensecondary & PABX)DVA-SWITCHCoupler adapters (2 x RJ45 socket)Secondary couplerDVAC-WSECPABX couplerDVAC-WPBXRJ12 Snap-In jack6 position 6 contact RJ12 socket with dualpunchdown blocks on the rear. Snaps into Mini5/650x25mm MT56-SAMO module shown on page 8.MT50-RJ12RJ45 T Adaptors3 x RJ45 female RJ45T3F2 x RJ45 female -1 x Male RJ45 RJ458P8CTRJ45-D Type UTP AdaptorsWith one piece black hoods. Supplied unconfigured.RJ45 - D male RJ45 - D female9 way RJ459M8CT RJ459F8CT15 way RJ4515M8CT RJ4515F8CT25 way RJ4525M8CT RJ4525F8CTFloor boxes:pages 80-81Cableprotection:page 177sales@minitran.co.uk78www.minitran.co.uk

adaptors, baluns & surge protectionComposite Video Balun (75 - 100ohm)Provides connection via a BNC plug & RJ45 socketto a CCTV composite video & security system.Transmission distance 650Mtrs colour. 750Mtrs black& white. Pins 4 & 5 are active.CVAB45G703 Dual BNC - RJ45 BalunDual path configuration of the balun allows boththe TX & RF coax signals to be carried over a singlelength of twisted pair cable.Female BNC (x 2) 75 ohm to120 ohm RJ45 socket G703FB-120-2Balun PanelsA large range of balun panels with a number ofinterface options including RJ45, BNC, Type 43 &HDC43 is available.Please contact our sales office for details.Surge ProtectorProtects 10Base-T, 100Base-T & Gigabit networkinterface cards, switches, token ring & other LANequipment from lightning induced & ESD causedtransients. These surge protectors are not suitablefor external lightning strike protection.Use with UPSs shown on page 239 for morecomprehensive network protection.PNET1GBHead Office: T: 01279 757775 • F: 01279 653535 79 Scotland: T: 01383 435985 • F: 01383 435993

Mini5 floorboxesFloor BoxesMini5/6 Floor Boxes are a low costdurable solution with many featuresallowing a flexible solution• Various knockouts per compartment• Clamp fixing for speed of installation• Strong lid reinforced with steel plate• Easy grip recessed lift handleDepthFloor Cut Out1 Compartment Std 80mm 215 x 126mm MTFB2-10802 Compartment Compact 80mm 215 x 191mm MTFB2-20803 Compartment Compact 80mm 266 x 212mm MTFB2-30803 Compartment Std 64mm 303 x 221mm MTFB2-30643 Compartment Std 76mm 303 x 221mm MTFB2-30763 Compartment Std 86mm 303 x 221mm MTFB2-30863 Compartment Std 120mm 303 x 221mm MTFB2-301204 Compartment Std 64mm 303 x 221mm MTFB2-40644 Compartment Std 76mm 303 x 221mm MTFB2-40764 Compartment Std 86mm 303 x 221mm MTFB2-40864 Compartment Std 120mm 303 x 221mm MTFB2-40120Plates for Mini5 Floor BoxesFor 1/3 Compartment For 2/3 Compartment For 4 CompartmentStd Compact StdFlat blank plate MTFB2-1300 MTFB2-2300 MTFB2-4000Flat plate for 4 x LJ6C MTFB2-1364 MTFB2-2364 MTFB2-4064Angled plate for 4 x LJ6C MTFB2-1364A MTFB2-2364A MTFB2-4064AFlat plate for 6 x LJ6C MTFB2-1366 MTFB2-2366 MTFB2-4066Flat plate for 4 x50x25mm modules MTFB2-1325 MTFB2-2325 MTFB2-4025Flat plate with 2 x UK 13amp sockets(For 1 compartment only) MTFB2-1312 - -Flat plate with 2 x 13 amp UKswitched sockets (For 3compartment only) MTFB2-1333 MTFB2-2333 -Flat plate with 2 x 13 amp left handUK switched sockets - - MTFB2-4033LHFlat plate with 2 x 13 amp right handUK switched sockets - - MTFB2-4033RHPanduitunderfloorGrid-runnersystem:pages 172-173Underfloor Powertrack.Pages 233-234sales@minitran.co.uk80www.minitran.co.uk

schneider floor boxesFloor BoxesQuick fit self locking tabs.No tooling required.Self closing lid whenopened in excess of 90˚.Minimises accidents.Manufactured by Schneider (formerly Mita).• 3 or 4 compartment metal floor box• Depths of 70mm, 100mm or 130mm• Various knockouts per compartment• Lid can be hinged from each side• Self locking tabs push fit into place to quicklysecure box into the floor• Strong lid reinforced with steel plate• Integrated cable retainers prevent cable damagebetween lid & trim• Foam lining on lid cable outlet prevents damageto cable & stops dirt ingress• Lid can be fitted with floor carpet insert3 Compartment Floor boxes4 Compartment Floor boxes70mm deepINS5307070mm deepINS54070100mm deepINS53100100mm deepINS54100130mm deepINS53130130mm deepINS54130Plates For Floor BoxesFor 3 compartmentFor 4 compartmentFlat plate with 2 x 13 ampUK switched socketsQ301Q471Flat plate with 3 x 13 ampUK non switched socketsQ312Q475Flat plate for 1 x doublegang wallplateQ314-Flat plate for 2 x single gang wallplatesQ321-Flat plate for 4 x 50x25mm modulesQ323Q474Flat plate for 4 x LJ6C -Q422Flat plate for 6 x LJ6CQ322Q472Flat plate for 8 x LJ6CQ325-Angled recessed plate for 4 x LJ6CQ328Q478Flat blank plateQ326Q476Modules &wallplates.Pages 8 & 10Underfloor Powertrack.Pages 233-234Head Office: T: 01279 757775 • F: 01279 653535 81 Scotland: T: 01383 435985 • F: 01383 435993

RJ PlugsRJ12 & RJ45 PlugsStd RJ45 PlugsEnhanced RJ45 PlugsCat6 RJ45 PlugsRJ plugs manufactured by TE Connectivity (formerly AMP/Tyco). Enhanced & Cat6 plugs have a cable loadbar to ease cable termination & maintain cable twists.Standard 1 piece RJ45 plugsStd RJ45 UTP plug for solid or stranded cable 5-554720-2Std RJ45 shielded plug for round solid cable 5-569530-2Enhanced 2 part RJ45 plugsEnhanced RJ45 UTP plug for Cat5e round stranded cable 5-558530-2Enhanced RJ45 UTP plug for Cat5e round solid cable 5-569278-2Enhanced RJ45 shielded Cat5e plug for round stranded cable 5-569552-2Enhanced RJ45 shielded Cat5e plug for round solid cable 5-569550-3Cat6 RJ45 plugsRJ45 Cat6 UTP/shielded plug for solid 23-24AWG cable (5-6mm cable dia) 5-1375204-2RJ45 Cat6 UTP/shielded plug for stranded 24-26AWG cable (5-6mm cable dia) 5-1375202-2RJ45 Cat6 UTP/shielded plug for solid 23-24AWG cable (6-7mm cable dia) 5-1479185-3RJ12 (6 position 6 contact plugs)RJ12 shielded plug for stranded cable 5-555174-2RJ PlugsLow cost range of RJ plugsmanufactured by Coble. UL &CSA approved.RJ45 plugsStd RJ45 UTP plug for round/flatstranded cableMP8P8C-50Std RJ45 UTP plug for round/flat solidor stranded cableMP8P8CSOLStd RJ45 shielded plug for round/flatsolid/stranded cableMP8P8CSHSRJ45 Cat6 UTP plug for round solid orstranded cableMP8P8CSOL-64, 6 & 10 Position RJ PlugsRJ10 4 position 4 contact for flatstranded cableMP4P4CRJ11 6 position 4 contact for flatstranded cableMP6P4CRJ12 6 position 6 contact for flatstranded cableMP6P6CRJ12 6 position 6 contact for solid orstranded cableMP6P6CSOLMMP/DEC 6 position 6 contact plug forflat solid/stranded cableMMP6P6CSOLRJ48 10 position 10 contact for flatstranded cableMP10P10CTooling Page 87Cable Page 74CablebootsPage 83Labels Page 94sales@minitran.co.uk82www.minitran.co.uk

RJ plugs & bootsRJ45 Plugs & ToolingCa6 UTPCat5e/6shieldedCat5e UTP• RJ45 plugs with anti tangle latches• Cat6 UTP and shielded plugs have slim line strainrelief boots• Cat5e plugs for stranded or solid cable.• Cat6 plugs for stranded cable• Wire prep tool separates & holds conductors inplace prior to insertion into RJ45 plugCat5e UTP plugCat5e shielded plugCat6 UTP plugCat6 shielded plugCrimp tool for Cat5e/6 plugsWire preparation toolToolingMP588-CMPS588-CSP688-CSPS688-CMPT5-8WPT-8RJ45 Strain Relief BootsCat5e Boots Retro fit Cat5e Boots Cat6 BootsRetro fit boots are clipped over RJ45 plugs on terminated patch leads.Minilink Boots for Minilink Retro Fit Boots TE Boots forCat5e Plugs for Cat5e Plugs Cat6 PlugsGrey MPSRGY56 MPCWLG 5-737893-2Dark Grey MPSRDG56 MPCWDG -Black MPSRBK56 MPCWBK 5-737893-7Yellow MPSRYW56 MPCWYW 5-737893-6Green MPSRGN56 MPCWGN 5-737893-5Red MPSRRD56 MPCWRD 5-737893-3Blue MPSRBE56 MPCWBE 5-737893-4Violet MPSRVT56 MPCWVT 5-737893-9White MPSRWE56 MPCWWE 5-737893-1Orange MPSROE56 MPCWOE 5-737893-8Pink MPSRPK56 - -Patch cable.Page 74New SecurityProductsSection. Pages243-250Head Office: T: 01279 757775 • F: 01279 653535 83 Scotland: T: 01383 435985 • F: 01383 435993

port blockout & lock-in devicesRJ45 Blockout DeviceSimple & secure method of controlling access todata & deters vandalism to RJ45 sockets.Blockout snaps into RJ45 socket & is released withremoval tool.Pack of 10 with 1 x removal toolPack of 100 with 5 x removal toolsPSL-DCJB**PSL-DCJB**-C** Substitute the ** with the following partnumber suffix for the required colour:Red: No suffixOff White: IWGrey: IGBlack: BLBlue: BUGreen: GRYellow: YLOrange: ORRJ45 Plug Lock-In DeviceTo install device onto plug: Insertthe tool & rotate clockwise 90degrees. Snap the plug into thedevice & rotate the tool back tothe original position and remove.To install into jack: Insertplug into the jack in theusual way.To remove plug from jack: Insertthe tool into the device & rotateclockwise 180 degrees. Removethe plug from the jack. Rotatethe tool back to original position& remove it from the device.The RJ45 plug lock-in device is an innovativesolution that secures network connections to reducenetwork downtime, data security breaches &hardware replacement due to theft.• Flush mount versions: Used with modularpatch panels, flush mount jacks• Recessed versions: Used with modems,IP Cameras, Access Points. The RJ45 plugprotrudes from the end of the Lock-in device toallow connection in recesses.• Super recessed versions: The RJ45 plug protrudesmore than the recessed version to allowconnection to more RJ45 socket types.These devices fit aroundpatch lead plugs that are notbooted and to Panduit RJ45plugs with integral slimline boots. Theydo not fit all booted patch leads & maynot fit all applications.We strongly recommend that customerstry a sample before ordering.Flush Lock-in deviceFlush Lock-in: Pack of 10 with 1 xinstallation/removal toolPSL-DCPL**Flush Lock-in: Pack of 100 with 5 xinstallation/removal toolPSL-DCPL**-CRecessed Lock-in deviceRecessed Lock-in: Pack of 10 with 1 xinstallation/removal toolPSL-DCPLR**Recessed Lock-in: Pack of 100 with 5 xinstallation/removal toolPSL-DCPLR**-CSuper Recessed Lock-in deviceSuper Recessed Lock-in: Pack of 10with 1 x installation/removal tool PSL-DCPLS**Super Recessed Lock-in: Pack of 100with 5 x installation/removal tool PSL-DCPLS**-C** Substitute with required colour. Please note that superrecessed versions are only available in red, black & green.Red: No suffix Black: BL Blue: BU Yellow: YLWhite: IWGreen: GROrange: ORGrey: IGsales@minitran.co.uk84www.minitran.co.uk

Cable typesThe New Cable DefinitionsThe old cable names (UTP, FTP etc) have been usedfor many years. However, the many different cableconstructions e.g with or without braid, an overallfoil or foiled twisted pairs etc lead to the ISO/IECgenerating new names to make the differences inconstruction clearer:Across all available brands we onlysell Cat5e, Cat6, Cat6a and Cat7 cablemade from pure copper. Bewareof copper-clad aluminium (CCA) cable which,despite what it may say on the cable/box, doesnot meet the standards and will not work tocategory anything! If you would like copies ofarticles/reports on this subject, just ask.New old cable Shield pair ShieldingU/UTP UTP None NoneF/UTP FTP Single foil (metallic side facing inwards) NoneF1/UTP F1TP Single foil (metallic side facing outwards) NoneF2/UTP F2TP Double foil NoneU/FTP STP None Foil around each pairSF/UTP SFTP Braid & Foil NoneS/FTP SSTP or STP Braid Foil around each pairF/FTP None Foil Foil around each pairTypes of ShieldingData transmission cables may be subject to interference. Thisinterference is either internal in origin - caused by crosstalk. Orexternal - caused by power cables situated in the near vicinity.Interference can be either electromagnetic or electrostatic in nature.Outer cable shield e.g. F/UTP: An excellent solution forelectromagnetic protection.Individual screens per pair e.g. U/FTP: Electromagnetic protection forpairs exposed to NEXT & FAXT (pair to pair) against protection fromexternal interference.Outer screen & individual pair screening e.g. S/FTP: Maximumprotection against high end interference environments.Cable Fire Rating Reference GuidePVC Cable: General purpose PVC cables may be used anywhere incommercial buildings in EMEA (Europe, Middle East & Africa) otherthan areas where LSZH rated cables are required. PVC cables areflame tested to IEC 60332-1 & held to a lower standard than LSZHrated cables.Low Smoke Zero Halogen (LSZH) Cable: Developed to eliminate toxicgases produced when a cable jacket burns. During a fire smoke &combustion gas propagates a great deal more rapidly than the fireitself. LSZH cable is recommended for use in enclosed areas withlittle ventilation or in areas where sensitive equipment could bedamaged. Required in many situations by European standards, it'san indicator of the jacket & insulator chemical make up. These cablesmust pass IEC 60754 & IEC 61034.Head Office: T: 01279 757775 • F: 01279 653535 85 Scotland: T: 01383 435985 • F: 01383 435993