1 Minutes of the 36th Meeting of the Expert Appraisal Committee ...

3. The National Ambient Air Quality Emission Standards issued by the Ministry vide G.S.R. No.826(E) dated 16 th November, 2009 should be followed.4. Gaseous emission levels including secondary fugitive emissions from all the sources should becontrolled within the latest permissible limits issued by the Ministry and regularly monitored.Guidelines/Code of Practice issued by the CPCB should be followed. New standards for thesponge iron plant issued by the Ministry vide G.S.R. 414(E) dated 30 th May, 2008 should befollowed.5. Vehicular pollution due to transportation of raw material and finished product should becontrolled. Proper arrangements should also be made to control dust emissions during loadingand unloading of the raw material and finished product.6. The water requirement shall not exceed 85 m 3 /hr. ‘Zero’ effluent discharge shall be strictlyfollowed and no wastewater should be discharged outside the premises.7. Efforts should be made to make use of rain water harvested. If needed, capacity of the reservoirshould be enhanced to meet the maximum water requirement. Only balance water requirementshould be met from other sources.8. Regular monitoring of influent and effluent surface, sub-surface and ground water should beensured and treated wastewater should meet the norms prescribed by the State Pollution ControlBoard or described under the E(P) Act whichever are more stringent.9. Proper handling, storage, utilization and disposal of all the solid waste should be ensured andregular report regarding toxic metal content in the waste material and its composition, end use ofsolid/hazardous waste should be submitted to the Ministry’s Regional Office at Bhubaneswar,SPCB and CPCB.10. A Disaster Management Plan should be prepared and a copy submitted to the Ministry’sRegional Office at Bhubaneswar, SPCB and CPCB within 3 months of issue of environmentclearance letter.11. As proposed, green belt should be developed in at least 33 % of the project area. Selection ofplant species shall be as per the CPCB guidelines in consultation with the DFO.12. All the recommendations made in the Charter on Corporate Responsibility for EnvironmentProtection (CREP) for the Steel Plants should be implemented.13. At least 5 % of the total cost of the project should be earmarked towards the Enterprise SocialCommitment based on locals need and item-wise details along with time bound action planshould be prepared and submitted to the Ministry’s Regional Office at Bhubaneswar.Implementation of such program should be ensured accordingly in a time bound manner.36.3.8 Proposed capacity enhancement of cement plant from 1.2 MTPA (3,600 TPD) cement to 2.0MTPA clinker (6,000 TPD) and 2.7 MTPA cement from New Chittor Cement works andinstallation of coal based CPP 80 MW (50 MW+30 MW) at Village Chanderia, District Chittorgarhin Rajasthan by M/s Birla Corporation Limited - regarding Environmental ClearanceThe project authorities and their consultant, M/s. Cholamandalam MS Risk Services Limited.,Chennai gave a detailed presentation on the salient features of the project and proposed environmentalprotection measures to be undertaken as per the Terms of Reference (TORs) accorded during the 16 thMeeting of the Expert Appraisal Committee (Industry-1) held during 22 nd – 24 th November 2010 forpreparation of EIA/EMP report. All the cement plants (more than 1.0 MTPA) are listed at S.No. 3(b)under Category A of the Schedule of EIA Notification 2006 and appraised by the Expert AppraisalCommittee (Industry-1) of MoEF.54