BETE TD-K - Twist & Dry High Pressure Spray Drying Nozzle

Twist & Dry TM Components & OptionsTwist & Dry Material Selection GuidePressureTemperaturebarpsiup to 302°F (150°C)u p to 400°F (204°C)u p to 450°F (232°C)68910,000TD 10KV iton 90 O-ring w/ P E E K B ac kup R ingC arrier in Duplex 2205TD 10K only available in Carriers 5 and 11TD 10KV iton 90 O-ring w/ P E E K B ac kup R ingC arrier in Duplex 2205TD 10K only available in Carriers 5 and 11TD 10KS ilic one O-ring w/ P E E K B ac kup R ingC arrier in Duplex 2205TD 10K only available in Carriers 5 and 11WHIRL4837,000TD 7KTD 7KTD 7KV iton 90 O-ring w/ P E E K B ac kup R ingV iton 90 O-ring w/ P E E K B ac kup R ingS ilic one O-ring w/ P E E K B ac kup R ing3505,076TDV iton 90 O-ring2413,500TDV iton 90 O-ring55800TDS ilic one O-ringCarrier 1 (CI1) (shown)Carrier 11 (CI11) - without lugsStandard TD CarrierCarrier 2 (CI2) (shown)Carrier 5 (CI5) - without lugsCarrier 10 (CI10) (shown)Carrier 12 (CI12) - without lugsTo Order: Spray Set-up Number¼ TD 2 - 025 - CI1 - 7K – 45 – B @7Hpipe sizeseriesswirl numberorificecarrier styleomit for TDL, or standard carrier, model #2pressureomit for TDL or if pressure is less than or equal to 3,500 psi (241 bar)7K if pressure is greater than 3,500 psi and less than orequal to 7,000 psi; needs PEEK backup ring10K if pressure is greater than 7,000 psiand less than or equal to 10,000 psi;needs PEEK backup ring + Duplex 2205 carrier materialthreadomit if NPTtemperaturematerialomit if temperature is less than or equal to400˚F (204˚C)45 if temperature is greater than 400˚F andless than or equal to 450˚F (232˚C); needsSilicone O-ringCALL 413-772-0846Call for the name of your nearest BETE representative.PEEK TM is a registered trademark of Victrex.www.BETE.com53