Digilyzer DL1 User Manual

More documents

Recommendations

Info

Technical Specification 9. TeCHNICAL speCIFICATIoN Frame Consumer / Professional, up to 24 bit, Sampling frequency f s = 32 – 96 kHz, Measurements Also supports: Interleaved 96 kHz mode on all inputs (single channel double sampling frequency modes) Signal Level-FS, level-RMS, signal frequency, THD+N, event logger, frequency sweep, PPM, scope, overload detection, Full-Scale detection Carrier Sampling frequency (accuracy ±2.5 ppm), carrier level Frame Channel status according to AES 3 (ed. 2003) and IEC 60958-3 (ed. 2003), bit statistics Event logger Recording resolution selectable 1”, 10”, 1’, 10’, 1h Recording duration selectable 8’, 83’, 8h, 83h, 20days Display Δt 1”, 10”, 1’, 10’, 1h, 10h, 24h, all Recording intervals max. 500 Single errors in one recording interval 10 - 36 000 Input connectors AES 3 (110 Ohm) XLR, S/PDIF (RCA), TOS-Link, ADAT, AES 3id (75 Ohm) using Chinch-BNC adapter, phantom power resistant Monitor Built-in speaker, headphone connector Display Backlit graphic LCD Power supply - 3x AA size dry batteries (alkaline), typical lifetime 8 hours - External DC power, 7.5 VDC, 500 mA, stabilized, use NTi Audio recommended parts only 64
Dimensions (L x W x H) 163 x 86 x 42 mm (6.4“ x 3.38“ x 1.63“) Weight 300 g (10.5 oz) incl. batteries Temperature 0° to +45° C (32° to 113° F) Humidity < 90 % R.H., non condensing
Page 1 and 2:
Digilyzer DL1 User Manual
Page 3 and 4:
INdex: 1. In t r o d u c t Io n 4 C
Page 5 and 6:
egistration Introduction Register a
Page 7 and 8:
Warnings In order to avoid any prob
Page 9 and 10:
Functions Overview The Digilyzer fe
Page 11 and 12:
• Some functions, e.g. SCOPE, are
Page 13 and 14: Connectors The Digilyzer includes t
Page 15 and 16: 3. FIrsT sTeps This chapter is a qu
Page 17 and 18: 8. Change auto power off time - Mov
Page 19 and 20: Menu Bar The menu bar allows the us
Page 21 and 22: setup screen Basic Operation The se
Page 23 and 24: display Basics Debugging and analyz
Page 25 and 26: Following errors are analyzed/visua
Page 27 and 28: 5. MeAsureMeNT FuNCTIoNs Channel St
Page 29 and 30: Row number Measurement Functions Pa
Page 31 and 32: Consistency Check The consistency c
Page 33 and 34: Bit statistic The bit statistic fun
Page 35 and 36: Logger The event logger records any
Page 37 and 38: Displaying events The display of th
Page 39 and 40: vu+ppM The Digilyzer offers a combi
Page 41 and 42: Level Measurement The Level menu fe
Page 43 and 44: Level RMS The analog Level RMS func
Page 45 and 46: Level Sweep The Digilyzer supports
Page 47 and 48: THd+N The THD+N function (Total Har
Page 49 and 50: scope The scope shows the waveform
Page 51 and 52: 7. ACCessorIes MiniLINK MiniLINK al
Page 53 and 54: 8. AppeNdIx 1C2f Format The AES3 st
Page 55 and 56: Logger Event Coding The following c
Page 57 and 58: DL1 event Cs WordLeN Cs CHACHB Cs o
Page 59 and 60: Byte Bit Bit-info Digilyzer Explana
Page 61 and 62: Appendix Consumer Format Coding Ove
Page 63: Appendix Byte Bit Bit-info Digilyze
show all

Digilyzer DL1 User Manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?