Digilyzer DL1 User Manual
Digilyzer DL1 User Manual
Digilyzer DL1 User Manual
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>DL1</strong> event<br />
Fr pArITY<br />
Fr<br />
BLoCKCrCC<br />
Au<br />
overLoAd<br />
Au MuTe<br />
Au WordLeN<br />
Cs CoN/pro<br />
Cs eMpHAsIs<br />
Cs<br />
FreQueNCY<br />
Appendix<br />
description<br />
Parity error. The parity of the received<br />
signals is not correct (problems on the<br />
transmission line).<br />
CRCC Error. The CRCC of the<br />
channel status information is incorrect<br />
(problems on the transmission line).<br />
Audio signal based events<br />
A clipping in the audio signal is<br />
detected. The clipping detector is<br />
configured in the <strong>Digilyzer</strong> setup<br />
screen. The setting for “PPM OVER<br />
THRESH” is stored within the log.<br />
No audio signal but only zeros have<br />
been found.<br />
The measured word length or the<br />
audio signal has changed (do<br />
not confuse with the word length<br />
signalized in the channels status).<br />
Channel status based events<br />
The professional / consumer<br />
indication bit in the channel status<br />
has changed.<br />
The emphasis bit of the channel<br />
status has changed.<br />
The signalized sample frequency in<br />
the channel status has changed.<br />
56<br />
remark<br />
n.a. ADAT<br />
10 rec./s<br />
n.a. ADAT<br />
10 rec./s<br />
sample<br />
10 rec./s<br />
10 rec./s<br />
n.a. ADAT,<br />
10 rec./s<br />
n.a. ADAT,<br />
10 rec./s<br />
n.a. ADAT,<br />
10 rec./s