Digilyzer DL1 User Manual

More documents

Recommendations

Info

professional Format Format Data coding Fs locked Sampling frequ. Fs scaling Level alignment Reference signal Time of day Sample code Data origin/ destination Measurement Functions Page number Fig 5-01 Channel status professional, page 1 Page number Fig 5-02 Channel status professional, page 2 Further details to the individual status indications are listed in the appendix. 28 Status memory Status memory Signal emphasis Channel mode <strong>User</strong> bit format Auxiliary bit use Word length Data reliability Cyclic redundancy check
Row number Measurement Functions Page number Fig 5-03, Channel status professional, page 3 On the third page the complete status information is displayed as hex code. The content of each status byte is shown as two digits in hex code. The status information contains 24 bytes. These are displayed within three rows and eight columns. The individual row- and column numbers shall be added together to read the information containing in the corresponding byte number. e.g. row number + column number = byte number 0 + 4 = 4 8 + 6 = 14 10 (hex) + 2 = 18 Application hint: 29 Column number There are many undefined and reserved bit combinations in the channels status. The HEX view offers the possibility to further examine the reserved states - if necessary.
Page 1 and 2: Digilyzer DL1 User Manual
Page 3 and 4: INdex: 1. In t r o d u c t Io n 4 C
Page 5 and 6: egistration Introduction Register a
Page 7 and 8: Warnings In order to avoid any prob
Page 9 and 10: Functions Overview The Digilyzer fe
Page 11 and 12: • Some functions, e.g. SCOPE, are
Page 13 and 14: Connectors The Digilyzer includes t
Page 15 and 16: 3. FIrsT sTeps This chapter is a qu
Page 17 and 18: 8. Change auto power off time - Mov
Page 19 and 20: Menu Bar The menu bar allows the us
Page 21 and 22: setup screen Basic Operation The se
Page 23 and 24: display Basics Debugging and analyz
Page 25 and 26: Following errors are analyzed/visua
Page 27: 5. MeAsureMeNT FuNCTIoNs Channel St
Page 31 and 32: Consistency Check The consistency c
Page 33 and 34: Bit statistic The bit statistic fun
Page 35 and 36: Logger The event logger records any
Page 37 and 38: Displaying events The display of th
Page 39 and 40: vu+ppM The Digilyzer offers a combi
Page 41 and 42: Level Measurement The Level menu fe
Page 43 and 44: Level RMS The analog Level RMS func
Page 45 and 46: Level Sweep The Digilyzer supports
Page 47 and 48: THd+N The THD+N function (Total Har
Page 49 and 50: scope The scope shows the waveform
Page 51 and 52: 7. ACCessorIes MiniLINK MiniLINK al
Page 53 and 54: 8. AppeNdIx 1C2f Format The AES3 st
Page 55 and 56: Logger Event Coding The following c
Page 57 and 58: DL1 event Cs WordLeN Cs CHACHB Cs o
Page 59 and 60: Byte Bit Bit-info Digilyzer Explana
Page 61 and 62: Appendix Consumer Format Coding Ove
Page 63 and 64: Appendix Byte Bit Bit-info Digilyze
Page 65 and 66: Dimensions (L x W x H) 163 x 86 x 4

Digilyzer DL1 User Manual

Create successful ePaper yourself

Delete template?

Save as template?