Avalanche User Guide - Wavelink

Chapter 9: Managing Software Profiles 8410 The package files will begin extracting locally. When the extraction is complete, click Next.The Configure the Software Package screen appears. This dialog box allows you to enable thepackage immediately and displays any configuration tools available for the package.11 Click Finish to complete the package creation.Copying Software PackagesCopying software packages allows you to configure a software package just once and thencopy it into all the profiles that require that package.To copy a software package:1 From the Profiles list, select the profile from which you want to copy the package.2 In the Software Packages area, right-click the package you want to copy and select CopySoftware Package from the context menu.The Please select the target profile dialog box appears.3 Select the profile to which you want to copy the package from the drop-down list.4 Click OK.The package and its configuration are included in the target software profile.Configuring Software Packages with a UtilitySome software packages come with configuration utilities that allow you to configure optionsbefore the packages are installed on a mobile device. These utilities can be accessed from theAvalanche Console. Configuration options will differ based on the software package. Fordetails about configuring software packages, see the specific user guide for that product.To configure a software package:1 From the Profiles tab, select the software profile with the software package you want toconfigure.2 From the Software Packages area of the Software Profile tab, select the package and clickConfigure. (You can also right-click the package name and select Configure.)The Configure Software Package dialog box appears.3 From the available list, double-click the utility you want to use to configure the package.4 When the options are configured, click OK.The software package is ready for synchronization.