Avalanche User Guide - Wavelink

Chapter 6: Managing Network Profiles 55• If you would like to add another start time to the list, click Add and select the date andtime you want the settings to be applied.• If you want to add another start time using the settings currently configured, clickClone.• If you want to change the currently selected start time, click Edit.5 Select the WLAN IP Settings tab.6 Configure the WLAN IP settings as desired.7 Save your changes.Configuring WLAN SettingsFrom a network profile, you can configure WLAN settings for your devices. These settings willbe deployed with the profile and applied on the device. The options include:SSIDEncryptionThis option provides wireless devices with the SSID. The SSID is a service setidentifier that only allows communication between devices sharing the sameSSID.This option allows you to enable encryption between your devices and theserver. You have the following options for encryption:Use Profile/None. Devices do not encrypt information.WEP. Wired Equivalent Privacy is an encryption protocol using either a 40-or 128-bit key which is distributed to your devices. When WEP is enabled, adevice can only communicate with other devices that share the same WEPkey.Avalanche only tracks the WEP keys that were assigned to devices throughthe Avalanche Console. Consequently, WEP keys displayed in the Consolemight not match the keys for a wireless device if you modified them fromoutside of Avalanche.