Avalanche User Guide - Wavelink

Chapter 5: Location Management 496 Save your changes.The assigned profile will be deployed.To view where a profile has been applied:1 From the Profiles tab, select the profile you want to view.2 Click the Applied Locations tab. You cannot change the information from this tab. Thistab displays the following information:• Parent Path. Displays the parent location, if there is one.• Group. The name of the location where the profile is applied.• Selection Criteria. Any selection criteria that are applicable at the location where theprofile is applied.Editing ExclusionsWhen you apply profiles to a location, the Avalanche Console applies the configurations to allnested locations within that location. That profile is considered an inherited profile. However,you can exclude an inherited profile from a location. The profile will still appear in theApplied Profiles tab, but will not be applied to any servers or devices. The profile will also beexcluded from any associated sub-locations.For example:Navigation WindowWhen a profile is applied at My Enterprise, it is also applied to all sub-locations. However, if itis excluded at Group A, the profile will also be excluded from Group 1 and Group 2.When a profile has been excluded from a parent location, you can allow a sub-location toapply it. Using the above example, you could reapply a profile to Group 1 that has beenexcluded at Group A. (It would still be excluded at Group 2.)To exclude an inherited profile:1 From the Navigation Window, select the location at which you want to exclude aninherited profile.