Avalanche User Guide - Wavelink

132The Configuration Data Change dialog box appears. This dialog box indicates that youchanged something from the original profile configuration.• If you want to use your updated changes, but do not want to update the deviceconfiguration file, select the Use New Configuration option.• If you want to use your updated changes and update the configuration file to reflectthose changes, select the Use New Configuration and Update config file option.4 Click OK.Toggling StatisticsThe device will appear as the size you selected.You can display connection statistics at the bottom of the Standard Viewer. The statisticsinclude bytes sent, bytes received, the number of keys pressed during the session, and thenumber of mouse clicks during the session.To toggle statistics:1 Click the Device tab.2 From the View menu, select Toggle Statistics.Using Device SkinsFrom the Standard Viewer, you can toggle between a selected skin and the default view (noskin). To use skins, you must enable the Show Skin option when you are configuring theClient or from the Configure dialog box in the Standard Viewer.If you did not enable the Show Skin option when you configured the Client, you canconfigure the connection to display skins from the Standard Viewer.NOTE: For information on how to enable the Show Skin option, see Editing the RemoteControl Package on page 109.Once you enable the Show Skin option, Remote Control displays the skin for the connectedmobile device. You can toggle the skin to display or not display from the Device tab in theStandard Viewer.To enable the Show Skin option:1 From the File, select Configure.The Configure dialog box appears.2 Enable the Show Skin option.3 Select which skin to display from the Skin drop-down list.4 Click OK.